Search NASA⌕ Search

SEARCH · Search NASA

Results for “Effectiveness factor”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

Determining Confounding Sensitivities In Eddy Current Thin Film Measurements

Determining Confounding Sensitivities In Eddy Current Thin Film Measurements Ethan Gros, Lalita Udpa, Electrical Engineering, Michigan State University, East Lansing MI 48824 James A. Smith, Experiment Analysis, Idaho National Laboratory, Idaho Falls ID 83415 Eddy current (EC) techniques are widely used in industry to measure the thickness of non-conductive films on a metal substrate. This is done using a system whereby a coil carrying a high-frequency alternating current is used to create an alternating magnetic field at the surface of the instrument's probe. When the probe is brought near a conductive surface, the alternating magnetic field will induce ECs in the conductor. The substrate characteristics and the distance of the probe from the substrate (the coating thickness) affect the magnitude of the ECs. The induced currents load the probe coil affecting the terminal impedance of the coil. The measured probe impedance is related to the lift off between coil and conductor as well as conductivity of the test sample. For a known conductivity sample, the probe impedance can be converted into an equivalent film thickness value. The EC measurement can be confounded by a number of measurement parameters. It is the goal of this research to determine which physical properties of the measurement set-up and sample can adversely affect the thickness measurement. The eddy current testing is performed using a commercially available, hand held eddy current probe (ETA3.3H spring loaded eddy probe running at 8 MHz) that comes with a stand to hold the probe. The stand holds the probe and adjusts the probe on the z-axis to help position the probe in the correct area as well as make precise measurements. The signal from the probe is sent to a hand held readout, where the results are recorded directly in terms of liftoff or film thickness. Understanding the effect of certain factors on the measurements of film thickness, will help to evaluate how accurate the ETA3.3H spring loaded eddy probe is at measuring film thickness under varying experimental conditions. This research will study the effects of a number of factors such as i) calibration, ii) conductivity, iii) edge effect, iv) surface finish of base material and v) cable condition and compare with the long term reproducibility of a standard measurement. This work was performed with support from the Department of Energy under the United States National Nuclear Security Administration (NNSA) at the Idaho National Laboratory.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Coriolis coupling effects in proton-pickup spectroscopic factors from 12 B

Spectroscopic factors to low-lying negative-parity states in Be 11 extracted from the B 12 ( d , He 3 ) Be 11 proton-removal reaction are interpreted within the rotational model. Earlier predictions of the p -wave proton-removal strengths in the strong-coupling limit of the Nilsson model underestimated the spectroscopic factors to the 3 / 2 1 - and 5 / 2 1 - states and suggested that deviations in the 1 + ground state of the odd-odd B 12 due to Coriolis coupling should be further explored. Furthermore, in this work we use the particle rotor model to take into account these effects and obtain a good description of the level scheme in B 11 , with a moderate K mixing of the proton Nilsson levels [110]1/2 and [101]3/2. This mixing, present in the 1 + bandhead of B 12 , is key to explaining the proton-pickup data.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

The effect of lighting environment on task performance in buildings – A review

The effects of indoor environmental conditions on human health, satisfaction, and performance have been the focal point of research for decades. This paper reviews and summarizes the impact of lighting environment on task performance, specifically for the built environment audience. Existing studies included a variety of performance tests on cognitive performance and perception, visual acuity and reaction, memory, reasoning, and labor productivity. Illuminance, luminance ratio and correlated color temperature were found to affect performance in different ways, reflecting the impact of experimental techniques, conditions, performance evaluation methods used and data analysis methods. These were reviewed and categorized, with discussion on limitations related to sample size, modeling approach, carryover effects and other factors affecting individual differences in performance, with recommendations for future improvement. Although no universal conclusions can be made, in general, task performance seems to improve with higher illuminances, contrast ratios in the range of 7–11:1 (while always making sure that glare will not occur in the space) and higher correlated color temperature, while spectral tuning in the red or blue wavelengths has also shown positive effects. To obtain more generic evidence, future studies should be more consistent in terms of experimental procedures and overall light conditions, and also consider the effects of vertical illuminance, daylight provision/control, and outside views on task performance. Finally, studying performance with multi-factorial designs in a human-centered optimized manner (such as deploying variable lighting scenarios optimized for various tasks) can lead to deeper understanding of lighting effects on task performance, and ultimately to improved lighting design and operation in buildings overall.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Inguinal and Ilio-inguinal Lymphadenectomy in Management of Palpable Melanoma Lymph Node Metastasis: A Long-Term Prospective Evaluation of Morbidity and Quality of Life

Purpose: Prospective data are lacking on long-term morbidity of inguinal lymphadenectomy including the influence of extent of surgery, use of radiotherapy, and patient factors. The aim of this study is to evaluate the effects of these factors on patient outcome, quality of life (QOL), regional symptoms, and limb volumes after inguinal or ilio-inguinal lymphadenectomy for melanoma. Methods: Analysis of the subgroup of patients with inguinal lymph node field relapse of melanoma, treated by inguinal or ilio-inguinal lymphadenectomy in the ANZMTG/TROG randomized trial of adjuvant radiotherapy versus observation. Results: Sixty-nine patients, 46 having undergone inguinal and 23 ilio-inguinal lymphadenectomy, with median follow-up of 73 months were analyzed. Mean limb volume increased rapidly after surgery (7% by 3 months) and continued to increase for at least another 18 months. Patients with body mass index (BMI) ≥ 25 kg/m{sup 2} had greater limb volume increase than normal-weight patients (13.3% versus 6.9%, P = 0.030). QOL improved over the first 18 months, but despite initial improvement, regional symptoms persisted long term. Type of surgery (inguinal or ilio-inguinal lymphadenectomy) had no demonstrably significant effect on limb volume (9.9% versus 13.4%, P = 0.35), QOL (P = 0.68), or regional symptoms (P = 0.65). There was no difference in overall survival between inguinal and ilio-inguinal lymphadenectomy [hazard ratio (HR) 0.75, 95% confidence interval (CI) 0.40–1.40, P = 0.43]. Conclusions: Inguinal lymphadenectomy for melanoma is a potentially morbid procedure with significant increases in limb volume. Patients report reasonable QOL but may have ongoing regional symptoms. Overweight/obesity is associated with poorer QOL, increased limb volume, and regional symptoms.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Harnessing the Power of Machine Learning and Omics to Identify Environmental Regulation on Microbial Functional Composition for Soil C, N, and P Cycling

Microbial enzyme-mediated soil organic matter (SOM) decomposition regulates many key ecosystem functions, such as elemental cycling, soil carbon sequestration, and soil fertility. However, representing microbial processes in Earth system models (ESMs) remains challenging due to a limited understanding of the spatial patterns of diverse microbial functions responsible for soil carbon (C), nitrogen (N), and phosphorus (P) cycling as well as the underlying mechanisms regulating their relative abundances across various environments. We collected published metagenomics data across the continental US (CONUS) to identify hundreds of microbial genes involved in soil C, N, and P cycling and grouped them into eight enzyme functional classes (EFCs). Each EFC represented a group of gene-encoded potential enzymes that decompose similar soil compounds. By integrating the abundances of omics-informed EFCs with the corresponding environmental information, we trained a machine learning (ML) model to identify key edaphic, climate, and vegetation factors regulating the abundances of each EFC. Quantitative analysis of effects of these factors revealed that the spatial distribution of eight EFCs for soil C, N, and P cycling across CONUS reflected potential resource optimization strategies of microbial communities under nutrient limitation, preferential organic-mineral associations, and climatological stresses. This insight, together with the interpreted ML tool and the CONUS-level benchmark for EFCs abundances, paves the way for parameterizing environmental-regulated microbial functional dynamics in biogeochemical models.

machine learning↗

In vitro fibrillization of Alzheimer’s amyloid-β peptide (1-42)

The amyloid deposition in the form of extracellular fibrillar aggregates of amyloid-β (Aβ) peptide is a critical pathological event in Alzheimer’s disease. Here, we report a systematic investigation of the effects of environmental factors on the kinetics of Aβ fibrillization in vitro. The effects of Aβ42 peptide concentration, temperature, pH, added solvents and the ratio of Aβ40 and Aβ42 on the peptide fibrillization under agitated conditions was studied. The analysis show that the rate of fibril growth by monomer addition is not limited by diffusion but by rearrangement in the monomer structure, which is enhanced by low concentrations of fluorinated alcohols and characterized by the activation energy of 12 kcal/mol. Fibrillization rate decreases at pH values below 7.0 where simultaneous protonation of His 13 and 14 inhibits fibril formation. The lag period for Aβ42 was only twofold shorter and the fibril growth rate twofold faster than those of Aβ40. Lag period was shortened and the fibrillization rate was increased only at 90% content of Aβ42.

36 MATERIALS SCIENCE↗

Exchange enhancement of the electron g factor in strained InGaAs/InP heterostructures

The exchange enhancement of the electron g factor in strained InGaAs/InP heterostructures with a two-dimensional electron gas is studied. Analysis of the temperature dependence of the resistance in the minima of the Shubnikov-de Haas oscillations in perpendicular magnetic fields up to 12 T in the vicinity of the odd filling factors of the Landau levels yields the values of the effective electron Lande factor g* from −8.6 to −10.1. The experimental values are compared with the results of theoretical calculations of the g factor of quasiparticles. The calculations are performed using an eight-band k · p Hamiltonian and take into account exchange interaction in the two-dimensional electron gas. It is shown that, under the conditions of a large overlap between the spin-split Landau levels, the maximum value of the quasiparticle g factor can be attained in the vicinity of even filling factors. This is caused by the nonparabolicity of the electron dispersion relation.

36 MATERIALS SCIENCE↗

Plasmon Resonances of Metal Nanoparticles in an Absorbing Medium

We study the behavior of plasmon resonances of metal nanospheres embedded in an absorbing medium. First-principles far-field computations based on the general Lorenz–Mie theory show that increasing absorption in the host medium broadens and suppresses plasmon resonances in the extinction and effective scattering efficiency factors and suppresses resonance features in the phase function. These effects of absorption are analogous to those on the morphology-dependent resonances of dielectric particles with large size parameters.

Mishchenko, Michael I.↗

Case studies of robots and automation as health/safety interventions in small manufacturing enterprises

This article reviews the experiences of 63 case studies of small businesses (<250 employees) with manufacturing automation equipment acquired through a health/safety intervention grant program. The review scope included equipment technologies classified as industrial robots (n = 17), computer numerical control (CNC) machining (n = 29), or other programmable automation systems (n = 17). Descriptions of workers' compensation (WC) claim injuries and identified risk factors that motivated the acquisition of the equipment were extracted from grant applications. Other aspects of the employer experiences, including qualitative and quantitative assessment of effects on risk factors for musculoskeletal disorders (MSD), effects on productivity, and employee acceptance of the intervention were summarized from the case study reports. Case studies associated with a combination of large reduction in risk factors, lower cost per affected employee, and reported increases in productivity were CNC stone cutting system, CNC/vertical machining system, automated system for bottling, CNC/routing system for plastics products manufacturing, and a CNC/Cutting system for vinyl/carpet. Six case studies of industrial robots reported quantitative reductions in MSD risk factors in these diverse manufacturing industries: snack foods; photographic film, paper, plate, and chemical; machine shops; leather goods and allied products; plastic products; and iron and steel forging. Furthermore, this review of health/safety intervention case studies indicates that advanced (programmable) manufacturing automation, including industrial robots, reduced workplace musculoskeletal risk factors, and improved process productivity in most cases.

42 ENGINEERING↗

Effects of Shell-Buckling Knockdown Factors in Large Cylindrical Shells

Shell-buckling knockdown factors (SBKF) have been used in large cylindrical shell structures to account for uncertainty in buckling loads. As the diameter of the cylinder increases, achieving the manufacturing tolerances becomes increasingly more difficult. Knockdown factors account for manufacturing imperfections in the shell geometry by decreasing the allowable buckling load of the cylinder. In this paper, large-diameter (33 ft) cylinders are investigated by using various SBKF's. An investigation that is based on finite-element analysis (FEA) is used to develop design sensitivity relationships. Different manufacturing imperfections are modeled into a perfect cylinder to investigate the effects of these imperfections on buckling. The analysis results may be applicable to large- diameter rockets, cylindrical tower structures, bulk storage tanks, and silos.

Hrinda, Glenn A.↗

Determination of g-tensors of low-symmetry Nd{sup 3+} centers in LiNbO{sub 3} by rectification of angular dependence of electron paramagnetic resonance spectra

Two procedures for facilitation of line tracing and deciphering of complicated spectra of electron paramagnetic resonance (EPR) were developed: a correction of microwave frequencies for every orientation of external magnetic field on the base of known values of g-tensor components for a reference paramagnetic center and followed rectification of measured angular dependences using plots of effective deviation of g{sup 2}-factors of observed lines from effective g{sup 2}-factors of the reference center versus angles or squared cosines of angles describing magnetic field orientations. Their application to EPR spectra of nearly stoichiometric lithium niobate crystals doped with neodymium allowed identifying two axial and six different low-symmetry Nd{sup 3+} centers, to determine all components of their g-tensors, and to propose common divacancy models for a whole family of Nd{sup 3+} centers.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Hadronic form factors in kaon photoproduction

We have revisited the effect of hadronic form factors in kaon photoproduction process by utilizing an isobaric model developed for kaon photoproduction off the proton. The model is able to reproduce the available experimental data nicely as well as to reveal the origin of the second peak in the total cross section, which was the main source of confusion for decades. Different from our previous study, in the present work we explore the possibility of using different hadronic form factors in each of the KΛN vertices. The use of different hadronic form factors, e.g. dipole, Gaussian, and generalized dipole, has been found to produce a more flexible isobar model, which can provide a significant improvement in the model.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

The Zn, S, and Cl Isotope Compositions of Mare Basalts: Implications for the Effects of Eruption Style and Pressure on Volatile Element Stable Isotope Fractionation on the Moon

We compare the stable isotope compositions of Zn, S, and Cl for Apollo mare basalts to better constrain the sources and timescales of lunar volatile loss. Mare basalts have broadly elevated yet limited ranges in δ(66)Zn, δ(34)S, and δ(37)Cl_(SBC+WSC) values of 1.27 ± 0.71, 0.55 ± 0.18, and 4.1 ± 4.0‰, respectively, compared to the silicate Earth at 0.15, –1.28, and 0‰, respectively. We find that the Zn, S, and Cl isotope compositions are similar between the low- and high-Ti mare basalts, providing evidence of a geochemical signature in the mare basalt source region that is inherited from lunar formation and magma ocean crystallization. The uniformity of these compositions implies mixing following mantle overturn, as well as minimal changes associated with subsequent mare magmatism. Degassing of mare magmas and lavas did not contribute to the large variations in Zn, S, and Cl isotope compositions found in some lunar materials (i.e., 15‰ in δ(66)Zn, 60‰ in δ(34)S, and 30‰ in δ(37)Cl). This reflects magma sources that experienced minimal volatile loss due to high confining pressures that generally exceeded their equilibrium saturation pressures. Alternatively, these data indicate effective isotopic fractionation factors were near unity. Our observations of S isotope compositions in mare basalts contrast to those for picritic glasses (Saal and Hauri 2021), which vary widely in S isotope compositions from –14.0 to 1.3‰, explained by extensive degassing of picritic magmas under high-P/P_(Sat) values (>0.9) during pyroclastic eruptions. The difference in the isotope compositions of picritic glass beads and mare basalts may result from differences in effusive (mare) and explosive (picritic) eruption styles, wherein the high-gas contents necessary for magma fragmentation would result in large effective isotopic fractionation factors during degassing of picritic magmas. Additionally, in highly vesiculated basalts, the δ(34)S and δ(37)Cl values of apatite grains are higher and more variable than the corresponding bulk-rock values. The large isotopic range in the vesiculated samples is explained by late-stage low-pressure “vacuum” degassing (P/P-(Sat) ~ 0) of mare lavas wherein vesicle formation and apatite crystallization took place post-eruption. Bulk-rock mare basalts were seemingly unaffected by vacuum degassing. Degassing of mare lavas only became important in the final stages of crystallization recorded in apatite—potentially facilitated by cracks/fractures in the crystallizing flow. We conclude that samples with wide-ranging volatile element isotope compositions are likely explained by localized processes, which do not represent the bulk Moon.

Halogens↗

A Study of Some Factors Affecting Rolling-Contact Fatigue Life

A series of investigations using the fatigue spin rig to study the effect of several factors contributing to rolling contact fatigue life is summarized. Ball specimens of 1/2 and 9/16 inch diameter were tested at maximum theoretical Hertz compressive stresses in the range of 600,000 to 750,000 psi. Life was found to vary inversely with the tenth power of stress. In forging fiber studies, a greater concentration of failures and poorer life were observed where the greatest angle of intersection between the fiber flow lines and the surface occurred. This effect was independent of alloy composition. Higher lubricant viscosity was found to increase fatigue life, Lubricants having the same viscosity but of different base stock produced wide differences in life that correlated with the pressure viscosity coefficient of the lubricant. Higher temperature produced lower fatigue life. Dry powder lubricants produced poor fatigue life at 450 F; failure appearance indicated that the lubricant particles probably acted as minute stress raisers. In metallographic studies, nonmetallic inclusions were found to have a deleterious effect on fatigue life the inclusion size, location, composition, and condition of the matrix being contributing factors; failures were by shear cracking in the subsurface zone of maximum shear stress and eventual propagation into a shallow surface spall. Vacuum melting improved fatigue life, although a general correlation between cleanliness and fatigue life was not found. Life results for ten different bearing materials are presented.

Carter, Thomas L.↗

Emissions Relationships in Western Forest Fire Plumes: I. Reducing the Effect of Mixing Errors on Emission Factors

Studies of emission factors from biomass burning using aircraft data complement the results of lab studies and extend them to conditions of immense hot conflagrations. We illustrate and discuss emission relationships for 422 individual samples from many forest-fire plumes in the Western US. The samples are from two NASA investigations: ARCTAS (Arctic Research of the Composition of the Troposphere from Aircraft and Satellites) and SEAC4RS (Studies of Emissions and Atmospheric Composition, Clouds, and Climate Coupling by Regional Surveys). This work provides sample-by-sample enhancement ratios (EnRs) for 23 gases and particulate properties. Many EnRs provide candidates for emission ratios (ERs, corresponding to the EnR at the source) when the origin and degree of transformation is understood and appropriate. From these, emission factors (EFs) can be estimated when the fuel dry mass consumed is known or can be estimated using the carbon mass budget approach. This analysis requires understanding the interplay of mixing of the plume with surrounding air. Some initial examples emphasize that measured C(tot) = CO2 + CO in a fire plume does not necessarily describe the emissions of the total carbon liberated in the flames, C(burn). Rather, it represents C(tot) = C(burn) + C(bkgd), which includes possibly varying background concentrations for entrained air. Consequently, we present a simple theoretical description for plume entrainment for multiple tracers from flame to hundreds of kilometers downwind and illustrate some intrinsic linear behaviors. The analysis suggests a Mixed Effects Regression Emission Technique (MERET), which can eliminate occasional strong biases associated with the commonly used normalized excess mixing ratio (NEMR) method. MERET splits C(tot) to reveal C(burn) by exploiting the fact that C(burn) and all tracers respond linearly to dilution, while each tracer has consistent EnR behavior (slope of tracer concentration with respect to C(burn)). The two effects are separable. Two or three or preferably more emission indicators are required as a minimum; here we used ten. Limited variations in the EnRs for each tracer can be incorporated and the variations and co-variations analyzed. The percentage CO yield (or the modified combustion efficiency) plays some role. Other co-relationships involving nitrogen and organic classes are more prominent; these have strong relationships to the C(burn) to O3 emission relationship. In summary, MERET allows fine spatial resolution (EnRs for individual observations) and comparison of similar plumes distant in time and space. Alkene ratios provide us with an approximate photochemical timescale. This allows discrimination and definition, by fire situation, of ERs, allowing us to estimate emission factors.

Chatfield, Robert B.↗

SU-F-I-79: Validation of a Monte Carlo Radiographic Simulation

Purpose: To validate a radiographic simulation in order to estimate patient dose due to clinically-used radiography protocols. Methods: A Monte Carlo simulation was created to simulate a radiographic x-ray beam using GEANT4. Initial validation was performed according to a portion of TG 195. Computational NURBS-based phantoms were used simulate patients of varying ages and sizes. The deposited energy in the phantom is output by the simulation. The exposure in air from a clinically used radiography unit was measured at 100 cm for various tube potentials. 10 million photons were simulated with 1 cubic centimeter of air located 100 cm from the source, and the total absorbed dose was noted. The normalization factor was determined by taking a ratio of the measured dose in air to the simulated dose in air. Dose to individual voxels is calculated using the energy deposition map along with the voxelized and segmented phantom and the normalization factor. Finally, the effective dose is calculated using the ICRP methodology and tissue weighting factors. Results: This radiography simulation allows for the calculation and visualization of the energy deposition map within a voxelized phantom. The ratio of exposure, measured using an ionization chamber, to air in the simulation was determined. Since the simulation output is calibrated to match the exposure of a given clinical radiographic x-ray tube, the dose map may be visualized. This will also allow for absorbed dose estimation in specific organs or tissues as well as a whole body effective dose estimation. Conclusion: This work indicates that our Monte Carlo simulation may be used to estimate the radiation dose from clinical radiographic protocols. This will allow for an estimate of radiographic dose from various examinations without the use of traditional methods such as thermoluminescent dosimeters and body phantoms.

60 APPLIED LIFE SCIENCES↗

The Effect Of Ionization Variance On Nuclear-recoil Dark Matter Searches

Direct detection dark matter experiments are increasingly interested in the low-mass dark matter parameter space, but zero-background low-mass searches require event separation between the electron and nuclear recoil bands, which requires a proper understanding of detector energy reconstruction. Previous simulations have shown that we do not entirely understand the ionization efficiency (yield) for electron and nuclear recoils, as the assumption that the distribution for the yield is normally distributed for a true recoil energy is violated. Since the yield distribution may directly affect dark matter low-mass limits, it is crucial we understand how the yield is distributed. A component to understanding the yield distribution is the variance in the number of electron-hole pairs produced or ionization variance. This effect has been studied relatively infrequently as experiments have been interested in large energy deposits (10 - 100 keV) and could accurately separate electron and nuclear recoil events. For electron recoils, the ionization variance is described by a “Fano” factor. For nuclear recoils the effect can be parameterized by an “effective” Fano factor, which has similar definition but a different physical origin. The nuclear recoil “effective” Fano factor is shown to be much larger than the electron-recoil version above around 10 keV deposited energy.

Matheny, Mitchell Douglas↗

Estimation of the Optimal Brachytherapy Utilization Rate in the Treatment of Gynecological Cancers and Comparison With Patterns of Care

Purpose: We aimed to estimate the optimal proportion of all gynecological cancers that should be treated with brachytherapy (BT)-the optimal brachytherapy utilization rate (BTU)-to compare this with actual gynecological BTU and to assess the effects of nonmedical factors on access to BT. Methods and Materials: The previously constructed inter/multinational guideline-based peer-reviewed models of optimal BTU for cancers of the uterine cervix, uterine corpus, and vagina were combined to estimate optimal BTU for all gynecological cancers. The robustness of the model was tested by univariate and multivariate sensitivity analyses. The resulting model was applied to New South Wales (NSW), the United States, and Western Europe. Actual BTU was determined for NSW by a retrospective patterns-of-care study of BT; for Western Europe from published reports; and for the United States from Surveillance, Epidemiology, and End Results data. Differences between optimal and actual BTU were assessed. The effect of nonmedical factors on access to BT in NSW were analyzed. Results: Gynecological BTU was as follows: NSW 28% optimal (95% confidence interval [CI] 26%-33%) compared with 14% actual; United States 30% optimal (95% CI 26%-34%) and 10% actual; and Western Europe 27% optimal (95% CI 25%-32%) and 16% actual. On multivariate analysis, NSW patients were more likely to undergo gynecological BT if residing in Area Health Service equipped with BT (odds ratio 1.76, P=.008) and if residing in socioeconomically disadvantaged postcodes (odds ratio 1.12, P=.05), but remoteness of residence was not significant. Conclusions: Gynecological BT is underutilized in NSW, Western Europe, and the United States given evidence-based guidelines. Access to BT equipment in NSW was significantly associated with higher utilization rates. Causes of underutilization elsewhere were undetermined. Our model of optimal BTU can be used as a quality assurance tool, providing an evidence-based benchmark against which actual patterns of practice can be measured. It can also be used to assist in determining the adequacy of BT resource allocation.

62 RADIOLOGY AND NUCLEAR MEDICINE↗