Photonic crystal enhanced silicon cell based thermophotovoltaic systems
Explore the source record for details and available documents.
SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Explore the source record for details and available documents.
Recent studies on the DIII-D tokamak [ J. L. Luxon, Nucl. Fusion 42, 614 (2002) ] have elucidated key aspects of the dependence of stability, confinement, and density control on the plasma magnetic configuration, leading to the demonstration of nearly noninductive operation for >1 s with pressure 30% above the ideal no-wall stability limit. Achieving fully noninductive tokamak operation requires high pressure, good confinement, and density control through divertor pumping. Plasma geometry affects all of these. Ideal magnetohydrodynamics modeling of external kink stability suggests that it may be optimized by adjusting the shape parameter known as squareness ( ). Optimizing kink stability leads to an increase in the maximum stable pressure. Experiments confirm that stability varies strongly with , in agreement with the modeling. Optimization of kink stability via is concurrent with an increase in the H-mode edge pressure pedestal stability. Global energy confinement is optimized at the lowest tested, with increased pedestal pressure and lower core transport. Adjusting the magnetic divertor balance about a double-null configuration optimizes density control for improved noninductive auxiliary current drive. The best density control is obtained with a slight imbalance toward the divertor opposite the ion grad(B) drift direction, consistent with modeling of these effects. These optimizations have been combined to achieve noninductive current fractions near unity for over 1 s with normalized pressure of 3.5< N<3.9, bootstrap current fraction of >65%, and a normalized confinement factor of H98(y,2) 1.5.
This paper provides a comparative assessment of three economic optimal control strategies, aimed at minimizing the fuel consumption of heavy-duty trucks in a highway environment, under a representative lead vehicle model informed by traffic data. These strategies fuse a global, offline dynamic programming (DP) optimization with online model predictive control (MPC). We then show how two of the three strategies can be adapted to accommodate the presence of traffic and optimally navigate signalized intersections using infrastructure-to-vehicular (I2V) communication. The MPC optimization, which is local in nature, makes refinements to a coarsely (but globally, subject to grid resolution) optimized target velocity profile from the DP optimization. The three candidate economic MPC formulations that are evaluated include: a nonlinear time-based formulation that directly penalizes predicted fuel consumption, a nonlinear time-based formulation that penalizes braking effort as a surrogate for fuel consumption, and a linear distance-based convex formulation that maintains a tradeoff between energy expenditure and tracking of the coarsely optimized velocity profile obtained from DP. Using a medium-fidelity Simulink model, based on a Volvo truck's longitudinal and engine dynamics, we analyze the optimization's performance on four highway routes under various traffic scenarios. Results demonstrate 3.7-8.3% fuel economy improvement on highway routes without traffic and 6.5-10% on the same routes with traffic included. Furthermore, we present a detailed analysis of energy usage by "type" (aerodynamic losses, braking losses, and comparison of brake-specific fuel consumption), under each candidate control strategy.
Recent studies on the DIII-D tokamak [J. L. Luxon, Nucl. Fusion 42, 614 (2002)] have elucidated key aspects of the dependence of stability, confinement, and density control on the plasma magnetic configuration, leading to the demonstration of nearly noninductive operation for >1 s with pressure 30% above the ideal no-wall stability limit. Achieving fully noninductive tokamak operation requires high pressure, good confinement, and density control through divertor pumping. Plasma geometry affects all of these. Ideal magnetohydrodynamics modeling of external kink stability suggests that it may be optimized by adjusting the shape parameter known as squareness ({zeta}). Optimizing kink stability leads to an increase in the maximum stable pressure. Experiments confirm that stability varies strongly with {zeta}, in agreement with the modeling. Optimization of kink stability via {zeta} is concurrent with an increase in the H-mode edge pressure pedestal stability. Global energy confinement is optimized at the lowest {zeta} tested, with increased pedestal pressure and lower core transport. Adjusting the magnetic divertor balance about a double-null configuration optimizes density control for improved noninductive auxiliary current drive. The best density control is obtained with a slight imbalance toward the divertor opposite the ion grad(B) drift direction, consistent with modeling of these effects. These optimizations have been combined to achieve noninductive current fractions near unity for over 1 s with normalized pressure of 3.5<{beta}{sub N}<3.9, bootstrap current fraction of >65%, and a normalized confinement factor of H{sub 98(y,2)}{approx_equal}1.5.
A controls-structures interaction design method is presented. The method coordinates standard finite-element structural analysis, multivariable controls, and nonlinear programming codes and allows simultaneous optimization of the structure and control system of a spacecraft. Global sensitivity equations are used to account for coupling between the disciplines. Use of global sensitivity equations helps solve optimization problems that have a large number of design variables and a high degree of coupling between disciplines. The preliminary design of a generic geostationary platform is used to demonstrate the multidisciplinary optimization method. Design problems using 15, 63, and 150 design variables to optimize truss member sizes and feedback gain values are solved and the results are presented. The goal is to reduce the total mass of the structure and the vibration control system while satisfying constraints on vibration decay rate. Incorporation of the nonnegligible mass of actuators causes an essential coupling between structural design variables and control design variables.
Recent studies on the DIII-D tokamak [J. L. Luxon, Nucl. Fusion 42, 614 (2002)] have elucidated key aspects of the dependence of stability, confinement, and density control on the plasma magnetic configuration, leading to the demonstration of nearly noninductive operation for >1 s with pressure 30% above the ideal no-wall stability limit. Achieving fully noninductive tokamak operation requires high pressure, good confinement, and density control through divertor pumping. Plasma geometry affects all of these. Ideal magnetohydrodynamics modeling of external kink stability suggests that it may be optimized by adjusting the shape parameter known as squareness (zeta). Optimizing kink stability leads to an increase in the maximum stable pressure. Experiments confirm that stability varies strongly with zeta, in agreement with the modeling. Optimization of kink stability via zeta is concurrent with an increase in the H-mode edge pressure pedestal stability. Global energy confinement is optimized at the lowest zeta tested, with increased pedestal pressure and lower core transport. Adjusting the magnetic divertor balance about a double-null configuration optimizes density control for improved noninductive auxiliary current drive. The best density control is obtained with a slight imbalance toward the divertor opposite the ion grad(B) drift direction, consistent with modeling of these effects. These optimizations have been combined to achieve noninductive current fractions near unity for over 1 s with normalized pressure of 3.5 65%, and a normalized confinement factor of H(98(y,2))approximate to 1.5.
Recent studies on the DIII-D tokamak [J. L. Luxon, Nucl. Fusion 42, 614 (2002)] have elucidated key aspects of the dependence of stability, confinement, and density control on the plasma magnetic configuration, leading to the demonstration of nearly noninductive operation for >1 s with pressure 30% above the ideal no-wall stability limit. Achieving fully noninductive tokamak operation requires high pressure, good confinement, and density control through divertor pumping. Plasma geometry affects all of these. Ideal magnetohydrodynamics modeling of external kink stability suggests that it may be optimized by adjusting the shape parameter known as squareness ({zeta}). Optimizing kink stability leads to an increase in the maximum stable pressure. Experiments confirm that stability varies strongly with {zeta}, in agreement with the modeling. Optimization of kink stability via {zeta} is concurrent with an increase in the H-mode edge pressure pedestal stability. Global energy confinement is optimized at the lowest {zeta} tested, with increased pedestal pressure and lower core transport. Adjusting the magnetic divertor balance about a double-null configuration optimizes density control for improved noninductive auxiliary current drive. The best density control is obtained with a slight imbalance toward the divertor opposite the ion grad(B) drift direction, consistent with modeling of these effects. These optimizations have been combined to achieve noninductive current fractions near unity for over 1 s with normalized pressure of 3.5<{beta}{sub N}<3.9, bootstrap current fraction of >65%, and a normalized confinement factor of H{sub 98(y,2)}{approx}1.5.
The phase parameters of matched-filtering searches for continuous gravitational-wave signals are sky position, frequency, and frequency time-derivatives. The space of these parameters features strong global correlations in the optimal detection statistic. For observation times smaller than 1 yr, the orbital motion of the Earth leads to a family of global-correlation equations which describes the 'global maximum structure' of the detection statistic. The solution to each of these equations is a different hypersurface in parameter space. The expected detection statistic is maximal at the intersection of these hypersurfaces. The global maximum structure of the detection statistic from stationary instrumental-noise artifacts is also described by the global-correlation equations. This permits the construction of a veto method which excludes false candidate events.
Generalized Ising models, also known as cluster expansions, are an important tool in many areas of condensed-matter physics and materials science, as they are often used in the study of lattice thermodynamics, solid-solid phase transitions, magnetic and thermal properties of solids, and fluid mechanics. However, the problem of finding the global ground state of generalized Ising model has remained unresolved, with only a limited number of results for simple systems known. We propose a method to efficiently find the periodic ground state of a generalized Ising model of arbitrary complexity by a new algorithm which we term cluster tree optimization. Importantly, we are able to show that even in the case of an aperiodic ground state, our algorithm produces a sequence of states with energy converging to the true ground state energy, with a provable bound on error. Compared to the current state-of-the-art polytope method, this algorithm eliminates the necessity of introducing an exponential number of variables to counter frustration, and thus significantly improves tractability. We believe that the cluster tree algorithm offers an intuitive and efficient approach to finding and proving ground states of generalized Ising Hamiltonians of arbitrary complexity, which will help validate assumptions regarding local vs. global optimality in lattice models, as well as offer insights into the low-energy behavior of highly frustrated systems.
Academia, industry, and Government are actively working towards a future where dozens of small to large Unmanned Aerial Systems (UAS) are present within urban environments. In this environment, high noise pollution and inefficiencies have the potential to render these new technologies impractical due to public annoyance and nonacceptance. This study aims to design and analyze a novel propeller design for minimum global torque using an optimization algorithm to find the full three dimensional solution of maximum efficiency. This resulted in a 𝐶 𝑙 distribution defining the global minimum torque solution for propeller design which corresponded with moving as much lift inboard as possible and reducing lift rapidly at the blade tip. The novel propeller (dubbed "Prandtl" propeller) was then compared with the current gold standard in propeller design, a minimum induced loss (MIL) propeller, which had all the same geometric properties except for blade twist and produced the same amount of thrust at the same advance ratio. The results of multiple iterations of Prandtl propellers showed an increase in efficiency of 2.0-3.3% for the Prandtl blade when compared to the equivalent MIL blade. A potential added benefit of this blade design is lower noise generation due to the lower lift loading at the tip reducing the large shear layer intensity which is the point source of noise in propellers. Two major breakthroughs for enabling widespread use of UAS in urban environments are noise reduction and vehicle efficiency, and this new propeller design has the potential to provide both.
Academia, industry, and Government are actively working towards a future where dozens of small to large Unmanned Aerial Systems (UAS) are present within urban environments. In this environment, high noise pollution and inefficiencies have the potential to render these new technologies impractical due to public annoyance and nonacceptance. This study aims to design and analyze a novel propeller design for minimum global torque using an optimization algorithm to find the full three dimensional solution of maximum efficiency. This resulted in a 𝐶 𝑙 distribution defining the global minimum torque solution for propeller design which corresponded with moving as much lift inboard as possible and reducing lift rapidly at the blade tip. The novel propeller (dubbed "Prandtl" propeller) was then compared with the current gold standard in propeller design, a minimum induced loss (MIL) propeller, which had all the same geometric properties except for blade twist and produced the same amount of thrust at the same advance ratio. The results of multiple iterations of Prandtl propellers showed an increase in efficiency of 2.0-3.3% for the Prandtl blade when compared to the equivalent MIL blade. A potential added benefit of this blade design is lower noise generation due to the lower lift loading at the tip reducing the large shear layer intensity which is the point source of noise in propellers. Two major breakthroughs for enabling widespread use of UAS in urban environments are noise reduction and vehicle efficiency, and this new propeller design has the potential to provide both.
We describe a density-based hierarchical group finding algorithm capable of identifying structures and substructures of any shape and density in multidimensional data sets where each dimension can be a numeric attribute with arbitrary measurement scale. This has applications in a wide variety of fields from finding structures in galaxy redshift surveys, to identifying halos and subhalos in N-body simulations and group finding in Local Group chemodynamical data sets. In general, clustering schemes require an a priori definition of a metric (a non-negative function that gives the distance between two points in a space) and the quality of clustering depends upon this choice. The general practice is to use a constant global metric which is optimal only if the clusters in the data are self-similar. For complex data configurations even the most finely tuned constant global metric turns out to be suboptimal. Moreover, the correct choice of metric also becomes increasingly important as the number of dimensions increase. To address these problems, we present an entropy-based binary space partitioning algorithm which uses a locally adaptive metric for each data point. The metric is employed to calculate the density at each point and a list of its nearest neighbors, and this information is then used to form a hierarchy of groups. Finally, the ratio of maximum to minimum density of points in a group is used to estimate the significance of the groups. Setting a threshold on this significance can effectively screen out groups arising due to Poisson noise and helps organize the groups into meaningful clusters. For a data set of N points, the algorithm requires only O(N) space and O(N(log N){sup 3}) time which makes it ideally suitable for analyzing large data sets. As an example, we apply the algorithm to identify structures in a simulated stellar halo using the full six-dimensional phase space coordinates.
Abstract Global chemistry‐climate models are computationally burdened as the chemical mechanisms become more complex and realistic. Optimization for graphics processing units (GPU) may make longer global simulation with regional detail possible, but limited study has been done to explore the potential benefit for the atmospheric chemistry modeling. Hence, in this study, the second‐order Rosenbrock solver of the chemistry module of CAM4‐Chem is ported to the GPU to gauge potential speed‐up. We find that on the CPU, the fastest performance is achieved using the Intel compiler with a block interleaved memory layout. Different combinations of compiler and memory layout lead to ~11.02× difference in the computational time. In contrast, the GPU version performs the best when using a combination of fully interleaved memory layout with block size equal to the warp size, CUDA streams for independent kernels, and constant memory. Moreover, the most efficient data transfer between CPU and GPU is gained by allocating the memory contiguously during the data initialization on the GPU. Compared to one CPU core, the speed‐up of using one GPU alone reaches a factor of ~11.7× for the computation alone and ~3.82× when the data transfer between CPU and GPU is considered. Using one GPU alone is also generally faster than the multithreaded implementation for 16 CPU cores in a compute node and the single‐source solution (OpenACC). The best performance is achieved by the implementation of the hybrid CPU/GPU version, but rescheduling the workload among the CPU cores is required before the practical CAM4‐Chem simulation.
This paper proposes and analyzes an asynchronously parallel optimization algorithm for finding multiple, high-quality minima of nonlinear optimization problems. Our multistart algorithm considers all previously evaluated points when determining where to start or continue a local optimization run. Theoretical results show that, under certain assumptions, the algorithm almost surely starts a finite number of local optimization runs and identifies, or has a single local optimization run converging to, every minimum. The algorithm is applicable to general optimization settings, but our numerical results focus on the case when derivatives are unavailable. In numerical tests, a PYTHON implementation of the algorithm is shown to yield good approximations of many minima (including a global minimum), and this ability scales well with additional resources. Our implementation’s time to solution is shown also to scale well even when the time to evaluate the function evaluation is highly variable.
The Global Microwave Imager (GMI) instrument must spin at a constant rate of 32 rpm continuously for the 3 year mission life. Therefore, GMI must be very precisely balanced about the spin axis and CG to maintain stable scan pointing and to minimize disturbances imparted to the spacecraft and attitude control on-orbit. The GMI instrument is part of the core Global Precipitation Measurement (GPM) spacecraft and is used to make calibrated radiometric measurements at multiple microwave frequencies and polarizations. The GPM mission is an international effort managed by the National Aeronautics and Space Administration (NASA) to improve climate, weather, and hydro-meteorological predictions through more accurate and frequent precipitation measurements. Ball Aerospace and Technologies Corporation (BATC) was selected by NASA Goddard Space Flight Center to design, build, and test the GMI instrument. The GMI design has to meet a challenging set of spin balance requirements and had to be brought into simultaneous static and dynamic spin balance after the entire instrument was already assembled and before environmental tests began. The focus of this contribution is on the analytical and test activities undertaken to meet the challenging spin balance requirements of the GMI instrument. The novel process of measuring the residual static and dynamic imbalances with a very high level of accuracy and precision is presented together with the prediction of the optimal balance masses and their locations.
The Global Microwave Imager (GMI) instrument must spin at a constant rate of 32 rpm continuously for the 3-year mission life. Therefore, GMI must be very precisely balanced about the spin axis and center of gravity (CG) to maintain stable scan pointing and to minimize disturbances imparted to the spacecraft and attitude control on-orbit. The GMI instrument is part of the core Global Precipitation Measurement (GPM) spacecraft and is used to make calibrated radiometric measurements at multiple microwave frequencies and polarizations. The GPM mission is an international effort managed by the National Aeronautics and Space Administration (NASA) to improve climate, weather, and hydro-meteorological predictions through more accurate and frequent precipitation measurements. Ball Aerospace and Technologies Corporation (BATC) was selected by NASA Goddard Space Flight Center to design, build, and test the GMI instrument. The GMI design has to meet a challenging set of spin balance requirements and had to be brought into simultaneous static and dynamic spin balance after the entire instrument was already assembled and before environmental tests began. The focus of this contribution is on the analytical and test activities undertaken to meet the challenging spin balance requirements of the GMI instrument. The novel process of measuring the residual static and dynamic imbalances with a very high level of accuracy and precision is presented together with the prediction of the optimal balance masses and their locations.
The CMS Submission Infrastructure is the primary system for managing computing resources for CMS workflows, including data processing, simulation, and analysis. It integrates geographically distributed resources from Grid, HPC, and cloud providers into federated pools managed by HTCondor and Glidein- WMS, for a total of around 500k CPU cores. This system dynamically manages workloads based on priorities defined by the collaboration. Additionally, CMS scheduling strategies must be flexible to handle multiple concurrent workloads while considering changing processing demands and resource availability from various providers.Efficient utilization of vast amounts of distributed compute resources is a key element for the success of the scientific programs of the LHC experiments. Optimizing the system is essential to maximize resource efficiency and fully utilize the distributed computing power. The CMS Submission Infrastructure team thus systematically investigates sources of inefficiency in workload scheduling to reduce their impact. In addition, a strategy of pilot overloading has been introduced to compensate for other inefficiency sources, thereby optimizing resource utilization and enhancing computational throughput.
The Proliferation Resistance Optimization (PRO-X) program is actively supporting the design of new-build nuclear systems by identifying intrinsic characteristics or design choices to minimize the potential for diversion or production of weapons-usable nuclear material. The PRO-X program looks to optimize the safety, security, and performance of the fuel cycle infrastructure for a wide array of reactor types, including research reactors, small modular reactors (SMRs), and large advanced reactors (ARs).