Search NASA⌕ Search

SEARCH · Search NASA

Results for “Guided wave”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

Relativistic gas accretion onto supermassive black hole binaries from inspiral through merger

Accreting supermassive black hole binaries are powerful multimessenger sources emitting both gravitational and electromagnetic (EM) radiation. Understanding the accretion dynamics of these systems and predicting their distinctive EM signals is crucial to informing and guiding upcoming efforts aimed at detecting gravitational waves produced by these binaries. To this end, accurate numerical modeling is required to describe both the spacetime and the magnetized gas around the black holes. In this paper, we present two key advances in this field of research. First, we have developed a novel 3D general relativistic magnetohydrodynamics (GRMHD) framework that combines multiple numerical codes to simulate the inspiral and merger of supermassive black hole binaries starting from realistic initial data and running all the way through merger. Throughout the evolution, we adopt a simple but functional prescription to account for gas cooling through photon emission. Next, we have applied our new computational method to follow the time evolution of a circular, equal-mass, nonspinning black hole binary for ∼200 orbits, starting from a separation of 20⁢𝑟 𝑔 and reaching the postmerger evolutionary stage of the system. We have shown how mass continues to flow toward the binary even after the binary “decouples” from its surrounding disk, but the accretion rate onto the black holes diminishes. We have identified how the minidisks orbiting each black hole are slowly drained and eventually dissolve as the binary compresses. We confirm previous findings that the system’s luminosity decreases by a factor of a few during inspiral; however, we observe an abrupt increase by ∼50% in this quantity at the time of merger, likely accompanied by an equally abrupt change in spectrum. Lastly, we have demonstrated that during the inspiral, fluid ram pressure regulates the fraction of the magnetic flux transported to the binary that attaches to the black holes’ horizons.

Accretion disk & black-hole plasma↗

Tomographic optical emission spectroscopy of atmospheric pressure plasma interacting with complex surfaces

Plasma distribution in 3D space is heavily influenced by complex surfaces and the coupling interactions between plasma properties and interfacing material properties. For example, guided streamers that transition to surface ionization waves (SIWs) and propagate over structured dielectrics experience field enhancements that can lead to localized increases in ionization rates and complex 3D configurations that are difficult to analyze. Investigating these configurations requires techniques than can provide a more complete 3D picture. To help address this capability gap, a tomographic optical emission spectroscopy (tomo-OES) diagnostic system has been developed at Sandia National Laboratories that can resolve SIWs. The system includes four intensified cameras that measure the angular projections of the plasma light emission through bandpass filters. A dot calibration target co-registers each angular projection to the same voxel grid and an algebraic reconstruction technique (ART) recovers the light intensity at each voxel. An atmospheric pressure plasma jet (APPJ), provided by Peter Bruggeman, has been investigated and representative results are shown in Figure 1. Here, a bandpass filter was used to isolate emission from the N 2 second positive system (SPS) at 337.1 nm to capture the transition of the streamer to SIW on a planar dielectric surface (relative permittivity 3.3) located 3 mm below the APPJ [3]. The surface wave velocity was 3.5x10 4 (m/s), consistent with measurements made by Steven Shannon. Characterization of this APPJ will support the group effort of standing up a reproducible APPJ across institutions for applications such as liquid treatment, catalysis, and plasma aided combustion. Future work will investigate non-planar surfaces and eventually develop tomographic laser-induced fluorescence (tomo-LIF) approaches.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Decameter studies of the 5 September 1973 flare

The spectra and positions of the meter-decameter wavelength radio sources associated with the flare of September 5, 1973 are discussed. The evolution of the size of the type II burst source is discussed and it is shown that it fluctuates by a factor of 10, or larger. Consequently, the potential and kinetic energies associated with the shock are uncertain by the same factor. By a comparison of the positions of the type II and type III sources, it is concluded that while the shock wave associated with the type II was guided along high loops, the type III electrons were injected along open field lines which diverged within a short height in the corona. The characteristics of a particularly interesting type III burst with a low-frequency cut-off are discussed. It is argued that nearby loops were not disrupted by the shock and that the energetic electrons produced during the event must have been injected at several sites and guided along open field lines at large distances from the flare to produce type III bursts.

Gergely, T. E.↗

Numerical methods for analyzing electromagnetic scattering

The wave propagation inside a cylindrical waveguide, coated with lossy dielectric material due to the incidence of a plane wave at the open end of the guide, was studied. The general properties of the normal mode propagation were investigated.

Lo, Y. T.↗

Wave attenuation and mode dispersion in a waveguide coated with lossy dielectric material

The modal attenuation constants in a cylindrical waveguide coated with a lossy dielectric material are studied as functions of frequency, dielectric constant, and thickness of the dielectric layer. A dielectric material best suited for a large attenuation is suggested. Using Kirchhoff's approximation, the field attenuation in a coated waveguide which is illuminated by a normally incident plane wave is also studied. For a circular guide which has a diameter of two wavelengths and is coated with a thin lossy dielectric layer (omega sub r = 9.1 - j2.3, thickness = 3% of the radius), a 3 dB attenuation is achieved within 16 diameters.

Lee, C. S.↗

Guided Plasmaspheric Hiss Interactions with Superthermal Electrons: Resonance Curves and Timescales - Part 1

Under the proper conditions, guided plasmaspheric hiss is shown to be more efficient than Coulomb collisions at scattering electrons in the superthermal energy range of 50 to 500 eV. Broadband, whistler mode hiss becomes guided by plasma density gradients, intensifying the wave energy densities and focusing the wave normal angles. These waves are shown to interact through Cherenkov (Landau) resonance with electrons below 500 eV, and the presented equatorial plane timescales for pitch angle, energy, and mixed diffusion are shown to be faster than Coulomb collision timescales for typical values at the inner edge of the plasmapause and in detached plasma regions. In the latter case, energy diffusion timescales of less than 100 s for small pitch angle electrons between 250 and 500 eV indicate that these waves have the potential to dramatically change the distribution function.

Liemohn, M. W.↗

Guided Plasmaspheric Hiss Interactions with Superthermal Electrons: Resonance Curves and Timescales - 1

Under the proper conditions, guided plasmaspheric hiss is shown to be more efficient than Coulomb collisions at scattering electrons in the superthermal energy range of 50 to 500 eV. Broadband, whistler mode hiss becomes guided by plasma density gradients, intensifying the wave energy densities and focusing the wave normal angles. These waves are shown to interact through Cherenkov (Landau) resonance with electrons below 500 eV, and the presented equatorial plane timescales for pitch angle, energy, and mixed diffusion are shown to be faster than Coulomb collision timescales for typical values at the inner edge of the plasmapause and in detached plasma regions. In the latter case, energy diffusion timescales of less than 100 s for small pitch angle electrons between 250 and 500 eV indicate that these waves have the potential to dramatically change the distribution function.

Liemohn, M. W.↗

The Lower Thermospheric Winter-To-Summer Meridional Circulation: 1: Driving Mechanism

In this study, the mechanism driving the narrow lower-thermospheric winter-to-summer meridional circulation is thoroughly investigated for the first time using the Specified Dynamics configuration runs of the Whole Atmosphere Community Climate Model eXtended (SD-WACCMX) simulations and the TIMED Doppler Interferometer (TIDI) observations. The mean meridional circulation in the SD-WACCMX is qualitatively consistent with the TIDI measurements, though the magnitude in the SD-WACCMX is about 50% weaker. The lower-thermospheric winter-to-summer circulation is mainly driven by the resolved wave forcing, including the tides and internally generated inertia gravity waves (GWs). The momentum forcing from the parameterized sub-grid scale GWs is not as significant as the resolved wave forcing in driving the lower-thermospheric meridional circulation. The GW parameterization scheme in the SD-WACCMX only includes GWs with phase velocities in the range of ±45 m/s, which might result in most of the parameterized sub-grid GWs dissipating and breaking in the mesosphere and hardly impacting the lower thermosphere. Only including slow GWs in the SD-WACCMX parameterization could potentially lead to the underestimation of the meridional wind in the model. Analysis also indicates the lower-thermospheric meridional circulation is stronger in the summer hemisphere, which is attributed to the hemispheric asymmetry in the resolved wave momentum forcing. This study underlines the importance of the whole atmosphere coupling through wave propagation and dissipation. This understanding can guide the model development with an accurate representation of underlying physical processes in the mesosphere and lower thermosphere which drives the lower-thermospheric circulation as well as the overall dynamics of this region.

Jack C. Wang↗

Demonstration of a 20‐W membrane‐external‐cavity surface‐emitting laser for sodium guide star applications

Abstract We present a record 20‐W continuous‐wave output power membrane‐external‐cavity surface‐emitting laser (MECSEL) double‐bonded to silicon carbide (SiC) heat spreaders emitting around 1178 nm. We achieved a maximum slope efficiency of 27.7% and an optical‐to‐optical efficiency of 26.7%. By utilising an intracavity birefringent filtre, the wavelength was tuned over 75 nm and maximum output power of 12.7 W was recorded at 1178 nm. This study shows the potential of MECSELs to achieve high‐performance and cost‐effective optically pumped semiconductor disk lasers targeting applications in sodium guide stars.

Priante, D.↗

Effects of Coulomb collisions on lower hybrid drift waves inside a laboratory reconnection current sheet

We have developed a local, linear theoretical model for lower hybrid drift waves that can be used for plasmas in the weakly collisional regime. Two cases with typical plasma and field parameters for the current sheet of the magnetic reconnection experiment have been studied. For a case with a low electron beta (β e =0.25, high guide field case), the quasi-electrostatic lower hybrid drift wave is unstable, while the electromagnetic lower hybrid drift wave has a positive growth rate for a high-β e case (β e =8.9, low guide field case). For both cases, including the effects of Coulomb collisions reduces the growth rate but collisional impacts on the dispersion and growth rate are limited (≲20%).

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Do dispersive waves play a role in collisionless magnetic reconnection?

Using fully kinetic simulations, we demonstrate that the properly normalized reconnection rate is fast ∼0.1 for guide fields up to 80× larger than the reconnecting field and is insensitive to both the system size and the ion to electron mass ratio. These results challenge conventional explanations of reconnection based on fast dispersive waves, which are completely absent for sufficiently strong guide fields. In this regime, the thickness of the diffusion layer is set predominantly by the electron inertial length with an inner sublayer that is controlled by finite gyro-radius effects. As the Alfvén velocity becomes relativistic for very strong guide fields, the displacement current becomes important and strong deviations from charge neutrality occur, resulting in the build-up of intense electric fields which absorb a portion of the magnetic energy release. Over longer time scales, secondary magnetic islands are generated near the active x-line while an electron inertial scale Kelvin-Helmholtz instability is driven within the outflow. These secondary instabilities give rise to time variations in the reconnection rate but do not alter the average value.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Exact solution for the degenerate ground-state manifold of a strongly interacting one-dimensional Bose-Fermi mixture

We present the exact solution for the many-body wavefunction of a one-dimensional mixture of bosons and spin-polarized fermions with equal masses and infinitely strong repulsive interactions under external confinement. Such a model displays a large degeneracy of the ground state. Using a generalized Bose-Fermi mapping, we find the solution for the whole set of ground-state wave functions of the degenerate manifold and we characterize them according to group-symmetry considerations. We find that the density profile and the momentum distribution depends on the symmetry of the solution. By combining the wave functions of the degenerate manifold with suitable symmetry and guided by the strong-coupling form of the Bethe-Ansatz solution for the homogeneous system, we propose an analytic expression for the many-body wave function of the inhomogeneous system which well describes the ground state at finite, large, and equal interaction strengths, as validated by numerical simulations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Compact Packaging of Photonic Millimeter-Wave Receiver

A carrier structure made from a single silicon substrate is the basis of a compact, lightweight, relatively inexpensive package that holds the main optical/electronic coupling components of a photonic millimeter-wave receiver based on a lithium niobate resonator disk. The design of the package is simple and provides for precise relative placement of optical components, eliminating the need for complex, bulky positioning mechanisms like those commonly used to align optical components to optimize focus and coupling. Although a prototype of the package was fabricated as a discrete unit, the design is amenable to integration of the package into a larger photonic and/or electronic receiver system. The components (see figure) include a lithium niobate optical resonator disk of 5-mm diameter and .200- m thickness, positioned adjacent to a millimeter- wave resonator electrode. Other components include input and output coupling prisms and input and output optical fibers tipped with ball lenses for focusing and collimation, respectively. Laser light is introduced via the input optical fiber and focused into the input coupling prism. The input coupling prism is positioned near (but not in contact with) the resonator disk so that by means of evanescent-wave coupling, the input laser light in the prism gives rise to laser light propagating circumferentially in guided modes in the resonator disk. Similarly, a portion of the circumferentially propagating optical power is extracted from the disk by evanescent-wave coupling from the disk to the output coupling prism, from whence the light passes through the collimating ball lens into the output optical fiber. The lens-tipped optical fibers must be positioned at a specified focal distance from the prisms. The optical fibers and the prisms must be correctly positioned relative to the resonator disk and must be oriented to obtain the angle of incidence (55 in the prototype) required for evanescent-wave coupling of light into and out of the desired guided modes in the resonator disk. To satisfy all these requirements, precise alignment features are formed in the silicon substrate by use of a conventional wet-etching process. These features include a 5-mm-diameter, 50- m-deep cavity that holds the disk; two trapezoidal-cross-section recesses for the prisms; and two grooves that hold the optical fibers at the correct positions and angles relative to the prisms and disk. The fiber grooves contain abrupt tapers, near the prisms, that serve as hard stops for positioning the lenses at the focal distance from the prisms. There are also two grooves for prismadjusting rods. The design provides a little slack in the prism recesses for adjusting the positions of the prisms by means of these rods to optimize the optical coupling.

Nguyen, Hung↗

Loss of ring current O(+) ions due to interaction with Pc 5 waves

A test particle code is used here to investigate ring current ion interaction with Pc 5 waves, combined with convection and corotation electric fields, with emphasis on the loss of O(+) ions over the dayside magnetosphere. A new loss mechanism for the O(+) ions due to the combined effects of convection and corotation electric fields and interactions with Pc 5 waves via a magnetic drift-bound resonance is presented. For given fields, whether a particle gains or losses energy depends on its initial kinetic energy, pitch angle at the equatorial plane, and the position of its guiding center with respect to the azimuthal phase of the wave. The ring current O(+) ions show a dispersion in energies and L values with decreasing local time across the dayside, and a bulk shift to lower energies and higher L values. Due to interaction with the Pc 5 waves, the particle's kinetic energy can drop below that required to overcome the convection potential and the particle is lost to the dayside magnetopause by a sunward E x B drift.

Li, Xinlin↗

Active control of turbomachine discrete tones

This paper was directed at active control of discrete frequency noise generated by subsonic blade rows through cancellation of the blade row interaction generated propagating acoustic waves. First discrete frequency noise generated by a rotor and stator in a duct was analyzed to determine the propagating acoustic pressure waves. Then a mathematical model was developed to analyze and predict the active control of discrete frequency noise generated by subsonic blade rows through cancellation of the propagating acoustic waves, accomplished by utilizing oscillating airfoil surfaces to generate additional control propagating pressure waves. These control waves interact with the propagating acoustic waves, thereby, in principle, canceling the acoustic waves and thus, the far field discrete frequency tones. This model was then applied to a fan exit guide vane to investigate active airfoil surface techniques for control of the propagating acoustic waves, and thus the far field discrete frequency tones, generated by blade row interactions.

Fleeter, Sanford↗

Surface waves at the interface with an antisymmetric gain/loss profile

We studied properties of strongly guiding two-mode waveguides with antisymmetric gain/loss profile which constitute photonic analogues of quantum mechanical structures with parity-time symmetry breaking. For both TE and TM polarizations, the dependences of effective indices of the guided modes vs. gain/loss coefficient exhibit a degenerate critical point that defines two regimes with profoundly different behavior. In addition, we have shown that the interface between the two media supports propagation of a strongly confined non-attenuated TM polarized surface wave. We examined the properties of the surface wave obtained by both the modal and FDTD method and discuss the differences between the results obtained by both techniques as both the material and geometrical parameters are varied.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗