Search NASA⌕ Search

SEARCH · Search NASA

Results for “HOLLOW CATHODES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

Porous Hollow Carbon@Sulfur Composites for High-Power Lithium-Sulfur Batteries

Slowing down the shuttle: C@S nanocomposites (see TEM images) based on mesoporous, hollow carbon capsules were generated by a template-based approach. As the cathode material in a Li–S secondary battery, they display outstanding electrochemical features attributed to sequestration of elemental sulfur in the carbon capsules and to its favorable effect in limiting polysulfide shuttling as well as to enhanced electron transport from the sulfur.

catalysis (heterogeneous)↗

Palladium nanocrystals-imbedded mesoporous hollow carbon spheres with enhanced electrochemical kinetics for high performance lithium sulfur batteries

Lithium sulfur (Li-S) battery is one promising candidate for high energy density electrochemical energy storage system. Accelerating the sluggish reaction kinetics of sulfur cathode and suppressing the lithium polysulfide (LiPS) shuttle are crucial for the high-performance Li-S batteries. Herein, we prepared the catalytic palladium nano-particles (Pd NPs) imbedded in hollow carbon spheres (Pd@HCS) as sulfur host by a sacrificial template method. Benefitting from the hollow nanostructure and strong chemisorption ability of Pd NPs, Pd@HCS can effectively mitigate the LiPS shuttling via physical and chemical pathways. Furthermore, the Pd NPs as one electrocatalyst can accelerate the redox reaction kinetics of LiPS. The theoretical calculation and X-ray absorption spectroscopy elucidate that the moderate Pd-S bonding between Pd NPs and sulfur species are beneficial to LiPS conversion. The Pd@HCS/S electrode delivers a high initial capacity of 1306 mAh g –1 and 885 mAh g –1 after 100 cycles at 0.2 C, as well as the good cycling stability (a slight capacity decay of 0.068% per cycle over 400 cycles at 1 C). In conclusion, the Pd@HCS/S cathode with the high sulfur loading of 5.88 mg cm –2 delivers an initial capacity of 873 mAh g –1 at 0.2 C and good capacity retention of 85% after 100 cycles.

25 ENERGY STORAGE↗

Impact of Silicon Impurity on the Hydrometallurgical Recovery of NCM622 Cathode

Hydrometallurgy is one of the best approaches to date for recycling LIBs due to its high efficiency, low energy usage, and industrial scalability. However, impurities have always been a thorny issue because they could have unintended impacts on the recovered cathode materials. This research marks the first systematic investigation into the influence of silicon impurity on the LiNi 0.6 Co 0.2 Mn 0.2 O 2 (NCM622) cathode obtained from hydrometallurgical recycling. Here we find that silicon nanoparticles will be nucleated at the center of the precursor particles during co-precipitation synthesis, and the silicon core will slowly dissolve in the surrounding ammonia, creating a special hollow structure in the particle. More importantly, the dissolution of silicon impurity will eventually lead to the deposition of silicates in the cathode material, which is an unfavorable result. Test data indicate that NCM622 cathode with 5 at% silicon has a capacity of 148.8 mAh g −1 after 100 cycles at 1/3 C, approximately 10 mAh g −1 lower than the virgin. Despite being relatively mild, the adverse influence of silicon impurity in hydrometallurgical recycling still requires attention.

25 ENERGY STORAGE↗

Operating High-Energy Lithium-Metal Pouch Cells with Reduced Stack Pressure Through a Rational Lithium-Host Design

Transitioning from a liquid electrolyte to an inorganic solid electrolyte offers a potential pathway to enable highly reversible lithium-metal anodes. However, the solid-electrolyte-protected lithium-metal anode suffers from poor interfacial ionic contacts and requires an impractically high stack pressure (>1.0 MPa) to maintain the interfacial contacts. It is demonstrated here that combining a hollow silver/carbon fiber scaffold and an inorganic/organic composite electrolyte enables a highly reversible lithium-metal anode. Since the high surface area of the electrode provides intimate contact and the hollow structure of the electrode relieves the lithium plating-induced stress, the electrode/electrolyte interface remains stable during cycling even under mild stack pressure. This unconventional structural design is validated in practical pouch cells assembled with the 3D lithium host containing a onefold excess of lithium and a high-nickel cathode. At a mild stack pressure of 320 kPa, the pouch cell displays 83% capacity retention for 200 cycles. This work illustrates that combining a hollow electrode architecture and a robust solid electrolyte offers a practical pathway toward rechargeable lithium-metal anodes.

36 MATERIALS SCIENCE↗

Carbon nanotube-linked hollow carbon nanospheres doped with iron and nitrogen as single-atom catalysts for the oxygen reduction reaction in acidic solutions

Non-noble metal electrocatalysts toward the oxygen reduction reaction (ORR) are highly required to substitute expensive Pt/C as the cathode of proton exchange membrane fuel cells. However, the relatively low ORR activity of Pt-free catalysts under acidic conditions is the major issue. Herein, we engineered a three-dimensional structure consisting of atomically dispersed Fe, N-doped hollow carbon nanospheres linked by carbon nanotubes as an electrocatalyst for the ORR. Benefiting from the unique structure and high-density atomic Fe–N x sites, this new type of electrocatalyst showed an impressive ORR half-wave potential of 0.84 V and kinetic current density of 13.1 mA cm -2 at a potential of 0.8 V in acidic media, which was even better those of commercial Pt/C.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Efficient sulfur host based on NiCo{sub 2}O{sub 4} hollow microtubes for advanced Li-S batteries

High energy density and cost effectiveness make lithium-sulfur battery a promising candidate for next-generation electrochemical energy storage technology. Here, we have synthesized a highly efficient sulfur host namely NiCo{sub 2}O{sub 4} hollow microtubes/sulfur composite (NiCo{sub 2}O{sub 4}/S). The hollow interior cavity providing structural integrity while sufficient self-functionalized surfaces of NiCo{sub 2}O{sub 4} chemically bind polysulfides to prevent their dissolution in the organic electrolyte. When used in lithium-sulfur batteries, the synthesized NiCo{sub 2}O{sub 4}/S cathode delivers high specific capacity (1274 mAh g{sup −1} at 0.2 C), long cycling performance at 0.5 C, and good rate capability at high current rates. - Highlights: • Hollow NiCo{sub 2}O{sub 4}/S microtubes were evaluated as an efficient sulfur host. • The designed 1D hollow architecture resulted in better cycling performance. • NiCo{sub 2}O{sub 4}/S delivered high capacity, long cycle life and good rate capability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electrochemical system and method for electropolishing hollow metal bodies

A method and system for electrochemically machining a hollow body of a metal or a metal alloy. An electrode is positioned within a hollow body including a metal or metal alloy, where the hollow body has a variable internal diameter. The hollow body is oriented vertically, with the electrode oriented vertically therein. The hollow body is at least partially filled with an aqueous, acidic electrolyte solution, the electrolyte solution being devoid of hydrofluoric acid and having a viscosity less than 15 cP. An electric current is passed between the hollow body and the electrode, where the electric current includes a plurality of anodic pulses and a plurality of cathodic pulses, and where the cathodic pulses are interposed between at least some of the anodic pulses.

36 MATERIALS SCIENCE↗

Trak Investigation of Focusing Electrode Geometries for the DARHT Axis-I Diode

An investigation was carried out on the effects of different cathode shroud geometries of the DARHT Axis-1 diode using the Trak ray tracing software. Pierce angles of 20, 30, 45, 60, and 67.5 degrees were investigated. For each geometry the current density with respect to radial position will be presented as it evolves in the longitudinal direction. In addition the emittances for each geometry are compared and this information is used to determine the optimal geometry from the selected angles. These results are compared to the baseline geometry currently employed at DARHT of a simple 2.5mm recessed velvet cathode. Of the selected angles it was found that 45 degrees produced the lowest normalized emittance value, whereas 60 degrees produced the most uniform current density profile at 1cm away from the emission surface. For the purpose of this investigation the effects of the bucking coil and solenoid around the hollow anode of the DARHT Axis I injector are neglected.

47 OTHER INSTRUMENTATION↗

Preliminary Mechanical Design Study of the Hollow Electron Lens for HL-LHC

A Hollow Electron Lens (HEL) has been proposed in order to improve performance of halo control and collimation in the Large Hadron Collider in view of its High Luminosity upgrade (HL-LHC). The concept is based on a hollow beam of electrons that travels around the protons for a few meters. The electron beam is produced by a cathode and then guided by a strong magnetic field. The first step of the design is the definition of the magnetic field that drives the electron trajectories. The estimation of such trajectories by means of a dedicated MATLAB tool is presented. The influence of the main geometrical and electrical parameters is analyzed and discussed. Then, the main mechanical design choices for the solenoids, cryostats gun and collector are described. The aim of this paper is to provide an overview of the feasibility study of the Electron Lens for LHC. The methods used in this study also serve as examples for future mechanical and integration designs of similar devices.

43 PARTICLE ACCELERATORS↗

Tailoring conductive networks within hollow carbon nanospheres to host phosphorus for advanced sodium ion batteries

The formidable sustainability challenges in advancing energy storage technologies call for game-changing research in battery designs. The previous pursuing of novel cathode materials with high redox potentials impedes the vast applications due to the simultaneous electrolyte decomposition at high potentials, though they are expected to deliver high specific capacities. Eventually, people start thinking in an opposite way, desirable anode materials with low redox potentials can also own high specific capacities. Among all the promising candidates, phosphorus-based anodes in sodium ion batteries (SIBs) have received considerable attention owing to the low cost and relatively high natural abundance of phosphorus. More importantly, phosphorus can store three sodium atoms and enable a high theoretical capacity of 2596 mAh g -1 , which overwhelms any other SIB anode currently available. However, the poor electronic conductivity and large volume change of phosphorus during cycling severely deteriorate battery performance. The most widely used strategy is to confine phosphorus within well-designed carbon hosts. Here, we thereby introduce a new type of porous hollow carbon with conductive-network interior as phosphorus host, which not only improves the electrical conductivity, but also creates enough interior surface for maximizing phosphorus utilization and shortening the ion's diffusion distance, compared to those conventional hollow carbon hosts. Therefore, the as-prepared red phosphorus-carbon spheres composites (RP/CS) exhibit superior rate performance (similar to 1083 mAh g -1 at 4 A g -1 , similar to 837 mAh g -1 even at 8 A g -1 ) and excellent cycle life (1027 mAh g -1 at 4 A g -1 more than 2000 cycles).

25 ENERGY STORAGE↗

Cobalt oxide-coated N- and B-doped graphene hollow spheres as bifunctional electrocatalysts for oxygen reduction and oxygen evolution reactions

Here, a simple and scalable method has been developed for the synthesis of Co 3 O 4 -coated N- and B-doped graphene hollow spheres (Co 3 O 4 /NBGHSs). These Co 3 O 4 /NBGHSs are highly active for both oxygen reduction and evolution reactions and can exhibit higher electrocatalytic activities and better durability than commercial Pt/C and RuO 2 /C, respectively, demonstrating them to be efficient bi-functional electrocatalysts. In-depth analysis shows that the coupling between Co 3 O 4 and NBGHSs, strong interaction with adsorbed O 2 , high electric conductivity, and the specific hollow structure play important roles in imparting the higher electrocatalytic activities to the Co 3 O 4 /NBGHSs. When tested as cathode catalysts for Zn–air batteries, the Co 3 O 4 /NBGHSs exhibit better performance and higher stability than the Pt/C catalyst and other catalysts reported previously. Lastly, this strongly suggests that the Co 3 O 4 /NBGHSs could be used as efficient electrocatalysts for metal–air batteries with great potential to replace precious metal/carbon based materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Stable Metal Anode enabled by Porous Lithium Foam with Superior Ion Accessibility

Abstract Lithium (Li) metal anodes have attracted much interest recently for high‐energy battery applications. However, low coulombic efficiency, infinite volume change, and severe dendrite formation limit their reliable implementation over a wide range. Here, an outstanding stability for a Li metal anode is revealed by designing a highly porous and hollow Li foam. This unique structure is capable of tackling many Li metal problems simultaneously: first, it assures uniform electrolyte distribution over the inner and outer electrode's surface; second, it reduces the local current density by providing a larger electroactive surface area; third, it can accommodate volume expansion and dissipate heat efficiently. Moreover, the structure shows superior stability compared to fully Li covered foam with low porosity, and bulky Li foil electrode counterparts. This Li foam exhibits small overpotential (≈25 mV at 4 mA cm −2 ) and high cycling stability for 160 cycles at 4 mA cm −2 . Furthermore, when assembled, the porous Li metal as the anode with LiFePO 4 as the cathode for a full cell, the battery has a high‐rate performance of 138 mAh g −1 at 0.2 C. The beneficial structure of the Li hollow foam is further studied through density functional theory simulations, which confirms that the porous structure has better charge mobility and more uniform Li deposition.

Hafez, Ahmed M.↗

Vertical Co 9 S 8 hollow nanowall arrays grown on a Celgard separator as a multifunctional polysulfide barrier for high-performance Li–S batteries

Lithium–sulfur (Li–S) batteries have been regarded as one of the most promising next-generation energy-storage devices, due to their low cost and high theoretical energy density (2600 W h kg -1 ). However, the severe dissolution of lithium polysulfides (LiPSs) and the fatal shuttle effect of the sulfur cathode seriously hinder the practical applications of Li–S batteries. To address such issues, we present here, for the first time, a novel metal organic framework (MOF)-derived Co 9 S 8 nanowall array with vertical hollow nanoarchitecture and high electrical conductivity, which is grown in situ on a Celgard separator (Co 9 S 8 –Celgard) via a feasible and scalable liquid-reaction approach, as an efficient barrier for LiPSs in Li–S batteries. Benefiting from the direct in situ growth of vertical Co 9 S 8 hollow nanowall arrays as a multifunctional polar barrier, the Co 9 S 8 –Celgard separator possesses large surface area, excellent mechanical stability, and particularly strong LiPS-trapping ability via chemical and physical interactions. With these advantages, even with a pure sulfur cathode with a high sulfur loading of 5.6 mg cm -2 , the Li–S cells with the Co 9 S 8 –Celgard separator exhibit outstanding electrochemical performance: the initial specific capacity is as high as 1385 mA h g -1 with a retention of 1190 mA h g -1 after 200 cycles. The cells deliver a high capacity of 530 mA h g -1 at a 1C rate (1675 mA g -1 ) even after an impressive number of 1000 cycles with an average capacity fade of only 0.039% per cycle, which is promising for long-term cycling application at high charge/discharge current densities, and pouch-type Li–S cells with the Co 9 S 8 –Celgard separator display excellent cycling performance. When the optimized cathode with the sulfur loading in well-designed yolk–shelled carbon@Fe 3 O 4 (YSC@Fe 3 O 4 ) nanoboxes is employed, the cell with Co 9 S 8 –Celgard delivers a high initial capacity of 986 mA h g -1 at a 1C rate with a capacity retention as high as 83.2% even after a remarkable number of 1500 cycles. In conclusion, this work presents a strategy to grow on the separator a multifunctional polar interlayer with unique nanoarchitecture and high conductivity to chemically and physically trap the LiPSs, thus significantly enhancing the performance of Li–S batteries.

25 ENERGY STORAGE↗

Parallel vacuum arc discharge with microhollow array dielectric and anode

An electrode configuration with microhollow array dielectric and anode was developed to obtain parallel vacuum arc discharge. Compared with the conventional electrodes, more than 10 parallel microhollow discharges were ignited for the new configuration, which increased the discharge area significantly and made the cathode eroded more uniformly. The vacuum discharge channel number could be increased effectively by decreasing the distances between holes or increasing the arc current. Experimental results revealed that plasmas ejected from the adjacent hollow and the relatively high arc voltage were two key factors leading to the parallel discharge. The characteristics of plasmas in the microhollow were investigated as well. The spectral line intensity and electron density of plasmas in microhollow increased obviously with the decease of the microhollow diameter.

36 MATERIALS SCIENCE↗

Growth behavior of LiMn{sub 2}O{sub 4} particles formed by solid-state reactions in air and water vapor

Morphology control of particles formed during conventional solid-state reactions without any additives is a challenging task. Here, we propose a new strategy to control the morphology of LiMn{sub 2}O{sub 4} particles based on water vapor-induced growth of particles during solid-state reactions. We have investigated the synthesis and microstructural evolution of LiMn{sub 2}O{sub 4} particles in air and water vapor atmospheres as model reactions; LiMn{sub 2}O{sub 4} is used as a low-cost cathode material for lithium-ion batteries. By using spherical MnCO{sub 3} precursor impregnated with LiOH, LiMn{sub 2}O{sub 4} spheres with a hollow structure were obtained in air, while angulated particles with micrometer sizes were formed in water vapor. The pore structure of the particles synthesized in water vapor was found to be affected at temperatures below 700 °C. We also show that the solid-state reaction in water vapor is a simple and valuable method for the large-scale production of particles, where the shape, size, and microstructure can be controlled. - Graphical abstract: This study has demonstrated a new strategy towards achieving morphology control without the use of additives during conventional solid-state reactions by exploiting water vapor-induced particle growth. - Highlights: • A new strategy to control the morphology of LiMn{sub 2}O{sub 4} particles is proposed. • Water vapor-induced particle growth is exploited in solid-state reactions. • The microstructural evolution of LiMn{sub 2}O{sub 4} particles is investigated. • The shape, size and microstructure can be controlled by solid-state reactions.

36 MATERIALS SCIENCE↗

Revisit Carbon/Sulfur Composite for Li-S Batteries

To correlate the carbon properties e.g. surface area and porous structure, with the electrochemical behaviors of carbon/sulfur (C/S) composite cathodes for lithium-sulfur (Li-S) batteries, four different carbon frameworks including Ketjen Black (KB, high surface area and porous), Graphene (high surface area and nonporous), Acetylene Black (AB, low surface area and nonporous) and Hollow Carbon Nano Sphere (HCNS, low surface area and porous) are employed to immobilize sulfur (80 wt.%). It has been revealed that high surface area of carbon improves the utilization rate of active sulfur and decreases the real current density during the electrochemical reactions. Accordingly, increased reversible capacities and reduced polarization are observed for high surface area carbon hosts such as KB/S and graphene/S composites. The porous structure of KB or HCNS matrix promotes the long-term cycling stability of C/S composites but only at relatively low rate (0.2 C). Once the current density increases, the pore effect completely disappears and all Li-S batteries show similar trend of capacity degradation regardless of the different carbon hosts used in the cathodes. The reason has been assigned to the formation of reduced amount of irreversible Li2S on the cathode as well as shortened time for polysulfides to transport towards lithium anode at elevated current densities. This work provides valuable information for predictive selection on carbon materials to construct C/S composite for practical applications from the electrochemical point of view.

Environmental Molecular Sciences Laboratory↗

High rate lithium-sulfur batteries enabled by mesoporous TiO{sub 2} nanotubes prepared by electrospinning

Graphical abstract: Mesoporous titanium dioxide nanotubes (MTDNTs) used as host for sulfur was prepared by electrospinning technique and subsequent thermal treatment. The nanotube walls of MTDNTs act as a host for sulfur and the hollow structure is favorable for the fast transmission of Li{sup +} ions. After sulfur was encapsulated into the pores of nanotube walls of MTDNTs, the MTDNTs/S composite electrode displays a relatively good cycling performance and especially excellent rate performance (about 610 mAh g-1 at 8 C). - Highlights: • Mesoporous titanium dioxide nanotubes (MTDNTs) were fabricated by electrospinning and subsequent thermal treatment. • MTDNTs was used as host for sulfur, TEM and SEM analysis showed that sulfur distributed in the meso pores of MTDNTs walls. • MTDNTs/S composite cathode delivers a reversible discharge capacity of 610 mAh g{sup −1} at a high current rate of 8 C. - Abstract: Mesoporous titanium dioxide nanotubes (MTDNTs) were prepared by electrospinning and subsequent thermal treatment. The as-synthesized MTDNTs possess anatase mischcrystal structure, hollow texture morphology, and a relatively high specific surface area of 93.6 m{sup 2} g{sup −1} with a pore volume of 0.2190 cm{sup −3} g{sup −1}. The nanotube walls of MTDNTs act as a host for sulfur and the hollow structure is favorable for the fast transmission of Li{sup +} ions. After sulfur was encapsulated into the pores of nanotube walls of MTDNTs, the MTDNTs/S composite electrode displays a relatively good cycling performance and especially excellent rate performance (about 610 mAh g{sup −1} at 8 C). The retention capacity can be up to 74.2% when the discharge rate increases from 0.5C to 8.0 C.

36 MATERIALS SCIENCE↗

Recovery of critical elements from end-of-life lithium ion batteries with supported membrane solvent extraction

Single-stage and multi-stage systems and methods for the recovery of critical elements in substantially pure form from lithium ion batteries are provided. The systems and methods include supported membrane solvent extraction using an immobilized organic phase within the pores of permeable hollow fibers. The permeable hollow fibers are contacted by a feed solution on one side, and a strip solution on another side, to provide the simultaneous extraction and stripping of elements from dissolved lithium ion cathode materials, while rejecting other elements from the feed solution. The single- and multi-stage systems and methods can selectively recover cobalt, manganese, nickel, lithium, aluminum and other elements from spent battery cathodes and are not limited by equilibrium constraints as compared to traditional solvent extraction processes.

Bhave, Ramesh R.↗