Search NASA⌕ Search

SEARCH · Search NASA

Results for “Inverse Multiplication”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

Near-infrared observations of IRAS sources in and near dense cores

We report 0.4 to 20 micron photometry of 27 Infrared Astronomy Satellite (IRAS) point sources associated with dense cores in nearby dark clouds. It is found that these objects have a bimodal distribution of spectral slopes. The objects in the group with steep spectral slopes are typically within one half power radius of the core peak and are not visible on the POSS. The remainder of the objects are typically further from their cores, are optically visible and have shallow spectral slopes (s is approximately 0.6). Most of the sources in this group which have been previously identified are T Tauri stars. Both the groups of objects have essentially the same luminosity function with median luminosity of 1 to 2 L(solar), which is similiar to the luminosity function for T Tauri stars. The near-infrared (J,H,K,L) colors of the objects have been used to estimate the visual extinction to the stars. This indicates that the typical steep spectrum source has extinction A(upsilon) of approximately 30 magnitudes, which is larger by a factor of 3 to 4 than a uniform core can provide, thus the density must rise steeply in the vicinity of the star. For those objects where optical estimates of the extinction are available the optical estimates are typically smaller than our IR estimates by a factor of 1.6. For multiple scattering by grains that scatter primarily in the forward direction, this implies a grain albedo of 0.4 at V, consistent with theoretical predictions for bare grains. Using this derived extinction, the FIR emission from a spherical shell with an inverse power law density which contributes the correct amount of extinction has been modelled. It is shown that to be consistent with both the observations of the density of the core at a scale of 1.5 x 10(17) cm and the extinction derived from the near-IR colors there must be a circumstellar hole of radius 10-100 A.U. for all density laws with exponents greater than 1.2. It is also shown that a component in addition to the star and circumstellar shell is necessary to match the observed spectrum of steep spectrum sources.

Fuller, G. A.↗

EFT-1 Heatshield Aerothermal Environment Reconstruction

The EFT-1 Avcoat heatshield was instrumented with 34 plugs containing multiple thermocouples in-depth with an objective being to measure the flight aerothermal environment. This paper presents a discussion of the instrumentation and the techniques used to reconstruct the heating environment from the measured in-depth temperatures. The inverse heat transfer problem algorithms, models and assumptions will be outlined, and available results will be presented.

Oliver, A. Brandon↗

Region-of-interest diffuse optical tomography system

Diffuse optical tomography (DOT) using near-infrared light is a promising tool for non-invasive imaging of deep tissue. This technique is capable of quantitative reconstruction of absorption (μ{sub a}) and scattering coefficient (μ{sub s}) inhomogeneities in the tissue. The rationale for reconstructing the optical property map is that the absorption coefficient variation provides diagnostic information about metabolic and disease states of the tissue. The aim of DOT is to reconstruct the internal tissue cross section with good spatial resolution and contrast from noisy measurements non-invasively. We develop a region-of-interest scanning system based on DOT principles. Modulated light is injected into the phantom/tissue through one of the four light emitting diode sources. The light traversing through the tissue gets partially absorbed and scattered multiple times. The intensity and phase of the exiting light are measured using a set of photodetectors. The light transport through a tissue is diffusive in nature and is modeled using radiative transfer equation. However, a simplified model based on diffusion equation (DE) can be used if the system satisfies following conditions: (a) the optical parameter of the inhomogeneity is close to the optical property of the background, and (b) μ{sub s} of the medium is much greater than μ{sub a} (μ{sub s} > > μ{sub a}). The light transport through a highly scattering tissue satisfies both of these conditions. A discrete version of DE based on finite element method is used for solving the inverse problem. The depth of probing light inside the tissue depends on the wavelength of light, absorption, and scattering coefficients of the medium and the separation between the source and detector locations. Extensive simulation studies have been carried out and the results are validated using two sets of experimental measurements. The utility of the system can be further improved by using multiple wavelength light sources. In such a scheme, the spectroscopic variation of absorption coefficient in the tissue can be used to arrive at the oxygenation changes in the tissue.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

A Bayesian Approach for Quantifying Data Scarcity when Modeling Human Behavior via Inverse Reinforcement Learning

Computational models that formalize complex human behaviors enable study and understanding of such behaviors. However, collecting behavior data required to estimate the parameters of such models is often tedious and resource intensive. Thus, estimating dataset size as part of data collection planning (also known as Sample Size Determination) is important to reduce the time and effort of behavior data collection while maintaining an accurate estimate of model parameters. In this paper, we present a sample size determination method based on Uncertainty Quantification (UQ) for a specific Inverse Reinforcement Learning (IRL) model of human behavior, in two cases: 1) pre-hoc experiment design—conducted in the planning stage before any data is collected, to guide the estimation of how many samples to collect; and 2) post-hoc dataset analysis—performed after data is collected, to decide if the existing dataset has sufficient samples and whether more data is needed. Here, we validate our approach in experiments with a realistic model of behaviors of people with Multiple Sclerosis (MS) and illustrate how to pick a reasonable sample size target. Our work enables model designers to perform a deeper, principled investigation of effects of dataset size on IRL.

97 MATHEMATICS AND COMPUTING↗

Accelerating a fluvial incision and landscape evolution model with parallelism

Solving inverse problems, performing sensitivity analyses, and achieving statistical rigour in landscape evolution models require running many model realizations. Parallel computation is necessary to achieve this in a reasonable time. However, no previous landscape evolution algorithm is able to leverage modern parallelism. In this report, I describe an algorithm that can utilize the parallel potential of GPUs and many-core processors, in addition to working well in serial. The new algorithm runs 43× faster (70 s vs. 3000 s on a 10,000×10,000 input) than the previous state-of-the-art and exhibits sublinear scaling with input size. I also identify key techniques for multiple flow direction routing and quickly eliminating landscape depressions and local minima. Complete, well-commented, easily adaptable source code for all versions of the algorithm is available on Github and Zenodo.

58 GEOSCIENCES↗

Fermi and multifrequency observations of blazars

The Fermi Gamma-ray Space Telescope was successfully launched on June 11, 2008 and has already opened a new era for gamma-ray astronomy. The Large Area Telescope(LAT), the main instrument on board Fermi, with its large field of view and effective area, combined with its excellent timing capabilities, presents a significant improvement in sensitivity over its predecessor EGRET. The preliminary results of the Spectral Energy Distribution Analysis performed on a sample of bright blazars are presented. We have studied the quasi-simultaneous Spectral Energy Distributions (SED) of 48 blazars, detected within the three months of the Fermi LAT Bright AGN Sample (LBAS) data taking period, combining Fermi and Swift data with radio NIR-Optical and hard-X/gamma-ray data. We have used these SEDs to characterize the peak position and intensity of both the low and the high-energy features of blazar spectra. The results have been used to derive empirical relationships that estimate the position of the two peaks from the broad-band colors, i.e. the radio to optical (alpha{sub ro}) and optical to X-ray (alpha{sub ox}) spectral slopes, and from the gamma-ray spectral index. Our data show that the synchrotron peak frequency is positioned between 10{sup 12.5} and 10{sup 14.5} Hz in FSRQs and between 10{sup 13} and 10{sup 17} Hz in BL Lacertae objects. We find that the gamma-ray spectral slope is strongly correlated with the synchrotron peak energy, as expected at first order in synchrotron--inverse Compton scenarios. However, simple homogeneous, one-zone, Synchrotron Self Compton (SSC) models cannot explain most of our SEDs, especially in the case of FSRQs and low energy peaked (LBL) BL Lacs. More complex models involving External Compton Radiation or multiple SSC components are required to reproduce the overall SEDs and the observed spectral variability.

79 ASTRONOMY AND ASTROPHYSICS↗

An order (n) algorithm for the dynamics simulation of robotic systems

The formulation of an Order (n) algorithm for DISCOS (Dynamics Interaction Simulation of Controls and Structures), which is an industry-standard software package for simulation and analysis of flexible multibody systems is presented. For systems involving many bodies, the new Order (n) version of DISCOS is much faster than the current version. Results of the experimental validation of the dynamics software are also presented. The experiment is carried out on a seven-joint robot arm at NASA's Goddard Space Flight Center. The algorithm used in the current version of DISCOS requires the inverse of a matrix whose dimension is equal to the number of constraints in the system. Generally, the number of constraints in a system is roughly proportional to the number of bodies in the system, and matrix inversion requires O(p exp 3) operations, where p is the dimension of the matrix. The current version of DISCOS is therefore considered an Order (n exp 3) algorithm. In contrast, the Order (n) algorithm requires inversion of matrices which are small, and the number of matrices to be inverted increases only linearly with the number of bodies. The newly-developed Order (n) DISCOS is currently capable of handling chain and tree topologies as well as multiple closed loops. Continuing development will extend the capability of the software to deal with typical robotics applications such as put-and-place, multi-arm hand-off and surface sliding.

Chun, H. M.↗

Implementation issues for a compact 6 degree of freedom force reflecting handcontroller with cueing of modes

Teleoperated control requires a master human interface device that can provide haptic input and output which reflect the responses of a slave robotic system. The effort reported in this paper addresses the design and prototyping of a six degree-of-freedom (DOF) Cartesian coordinate hand controller for this purpose. The device design recommended is an XYZ stage attached to a three-roll wrist which positions a flight-type handgrip. Six degrees of freedom are transduced and control brushless DC motor servo electronics similar in design to those used in computer controlled robotic manipulators. This general approach supports scaled force, velocity, and position feedback to aid an operator in achieving telepresence. The generality of the device and control system characteristics allow the use of inverse dynamics robotic control methodology to project slave robot system forces and inertias to the operator (in scaled form) and at the same time to reduce the apparent inertia of the robotic handcontroller itself. The current control design, which is not multiple fault tolerant, can be extended to make flight control or space use possible. The proposed handcontroller will have advantages in space-based applications where an operator must control several robot arms in a simultaneous and coordinated fashion. It will also have applications in intravehicular activities (within the Space Station) such as microgravity experiments in metallurgy and biological experiments that require isolation from the astronauts' environment. For ground applications, the handcontroller will be useful in underwater activities where the generality of the proposed handcontroller becomes an asset for operation of many different manipulator types. Also applications will emerge in the Military, Construction, and Maintenance/Manufacturing areas including ordnance handling, mine removal, NBC (Nuclear, Chemical, Biological) operations, control of vehicles, and operating strength and agility enhanced machines. Future avionics applications including advanced helicopter and aircraft control may also become important.

Jacobus, Heidi↗

Efficient Implementations of the Quadrature-Free Discontinuous Galerkin Method

The efficiency of the quadrature-free form of the dis- continuous Galerkin method in two dimensions, and briefly in three dimensions, is examined. Most of the work for constant-coefficient, linear problems involves the volume and edge integrations, and the transformation of information from the volume to the edges. These operations can be viewed as matrix-vector multiplications. Many of the matrices are sparse as a result of symmetry, and blocking and specialized multiplication routines are used to account for the sparsity. By optimizing these operations, a 35% reduction in total CPU time is achieved. For nonlinear problems, the calculation of the flux becomes dominant because of the cost associated with polynomial products and inversion. This component of the work can be reduced by up to 75% when the products are approximated by truncating terms. Because the cost is high for nonlinear problems on general elements, it is suggested that simplified physics and the most efficient element types be used over most of the domain.

Lockard, David P.↗

Direct Top-down Estimates of Biomass Burning CO Emissions Using TES and MOPITT Versus Bottom-up GFED Inventory

In this study, we utilize near-simultaneous observations from two sets of multiple satellite sensors to segregate Tropospheric Emission Spectrometer (TES) and Measurements of Pollution in the Troposphere (MOPITT) CO observations over active fire sources from those made over clear background. Hence, we obtain direct estimates of biomass burning CO emissions without invoking inverse modeling as in traditional top-down methods. We find considerable differences between Global Fire Emissions Database (GFED) versions 2.1 and 3.1 and satellite-based emission estimates in many regions. Both inventories appear to greatly underestimate South and Southeast Asia emissions, for example. On global scales, however, CO emissions in both inventories and in the MOPITT-based analysis agree reasonably well, with the largest bias (30%) found in the Northern Hemisphere spring. In the Southern Hemisphere, there is a one-month shift between the GFED and MOPITT-based fire emissions peak. Afternoon tropical fire emissions retrieved from TES are about two times higher than the morning MOPITT retrievals. This appears to be both a real difference due to the diurnal fire activity variations, and a bias due to the scarcity of TES data.

bias↗

Development of Multi-Sensor Global Cloud and Radiance Composites for Earth Radiation Budget Monitoring from DSCOVR

The Deep Space Climate Observatory (DSCOVR) enables analysis of the daytime Earth radiation budget via the onboard Earth Polychromatic Imaging Camera (EPIC) and National Institute of Standards and Technology Advanced Radiometer (NISTAR). Radiance observations and cloud property retrievals from low earth orbit and geostationary satellite imagers have to be co-located with EPIC pixels to provide scene identification in order to select anisotropic directional models needed to calculate shortwave and longwave fluxes. A new algorithm is proposed for optimal merging of selected radiances and cloud properties derived from multiple satellite imagers to obtain seamless global hourly composites at 5-kilometer resolution. An aggregated rating is employed to incorporate several factors and to select the best observation at the time nearest to the EPIC measurement. Spatial accuracy is improved using inverse mapping with gradient search during reprojection and bicubic interpolation for pixel resampling. The composite data are subsequently remapped into EPIC-view domain by convolving composite pixels with the EPIC point spread function (PSF) defined with a half-pixel accuracy. PSF-weighted average radiances and cloud properties are computed separately for each cloud phase. The algorithm has demonstrated contiguous global coverage for any requested time of day with a temporal lag of under 2 hours in over 95 percent of the globe.

Khlopenkov, Konstantin↗

The Completed SDSS-IV extended Baryon Oscillation Spectroscopic Survey: Cosmological Implications from two Decades of Spectroscopic Surveys at the Apache Point observatory

We present the cosmological implications from final measurements of clustering using galaxies, quasars, and Ly$\alpha$ forests from the completed Sloan Digital Sky Survey (SDSS) lineage of experiments in large-scale structure. These experiments, composed of data from SDSS, SDSS-II, BOSS, and eBOSS, offer independent measurements of baryon acoustic oscillation (BAO) measurements of angular-diameter distances and Hubble distances relative to the sound horizon, $r_d$, from eight different samples and six measurements of the growth rate parameter, $f\sigma_8$, from redshift-space distortions (RSD). This composite sample is the most constraining of its kind and allows us to perform a comprehensive assessment of the cosmological model after two decades of dedicated spectroscopic observation. We show that the BAO data alone are able to rule out dark-energy-free models at more than eight standard deviations in an extension to the flat, $\Lambda$CDM model that allows for curvature. When combined with Planck Cosmic Microwave Background (CMB) measurements of temperature and polarization the BAO data provide nearly an order of magnitude improvement on curvature constraints. The RSD measurements indicate a growth rate that is consistent with predictions from Planck primary data and with General Relativity. When combining the results of SDSS BAO and RSD with external data, all multiple-parameter extensions remain consistent with a $\Lambda$CDM model. Regardless of cosmological model, the precision on $\Omega_\Lambda$, $H_0$, and $\sigma_8$, remains at roughly 1\%, showing changes of less than 0.6\% in the central values between models. The inverse distance ladder measurement under a o$w_0w_a$CDM yields $H_0= 68.20 \pm 0.81 \, \rm km\, s^{-1} Mpc^{-1}$, remaining in tension with several direct determination methods. (abridged)

79 ASTRONOMY AND ASTROPHYSICS↗

A Bayesian Modeling Approach for Estimation of a Shape-Free Groundwater Age Distribution using Multiple Tracers

The mixing of groundwaters with different ages in aquifers, groundwater age is more appropriately represented by a distribution rather than a scalar number. To infer a groundwater age distribution from environmental tracers, a mathematical form is often assumed for the shape of the distribution and the parameters of the mathematical distribution are estimated using deterministic or stochastic inverse methods. We found that the prescription of the mathematical form limits the exploration of the age distribution to the shapes that can be described by the selected distribution. In this paper, the use of freeform histograms as groundwater age distributions is evaluated. A Bayesian Markov Chain Monte Carlo approach is used to estimate the fraction of groundwater in each histogram bin. This method was able to capture the shape of a hypothetical gamma distribution from the concentrations of four age tracers. The number of bins that can be considered in this approach is limited based on the number of tracers available. The histogram method was also tested on tracer data sets from Holten (The Netherlands; 3 H, 3 He, 85 Kr, 39 Ar) and the La Selva Biological Station (Costa-Rica; SF 6 , CFCs, 3 H, 4 He and 14 C), and compared to a number of mathematical forms. According to standard Bayesian measures of model goodness, the best mathematical distribution performs better than the histogram distributions in terms of the ability to capture the observed tracer data relative to their complexity. Among the histogram distributions, the four bin histogram performs better in most of the cases. The Monte Carlo simulations showed strong correlations in the posterior estimates of bin contributions, indicating that these bins cannot be well constrained using the available age tracers. The fact that mathematical forms overall perform better than the freeform histogram does not undermine the benefit of the freeform approach, especially for the cases where a larger amount of observed data is available and when the real groundwater distribution is more complex than can be represented by simple mathematical forms.

54 ENVIRONMENTAL SCIENCES↗

Editorial to the special issue on the 2015 TOUGH Symposium

This Special Issue of Transport in Porous Media features selected papers from the 2015 TOUGH Symposium, which took place on September 28–30, 2015, in Berkeley, California, USA. Such symposia are held every 3 years and are a forum where users of the TOUGH family of numerical simulators meet for an open exchange on the code applications and recent enhancements. The TOUGH codes (TOUGH is an acronym for Transport of Unsaturated Groundwater and Heat) were originally developed in the early 1980s for geothermal reservoir simulation by a team of researchers at the Lawrence Berkeley National Laboratory (LBNL) headed by Karsten Pruess (see http://esd.lbl.gov/TOUGH). The TOUGH codes have a modular structure in which different fluid components can be incorporated into the code by means of a replaceable equation of state (EOS) package. Since its first release, a variety of important EOS modules have been developed, enabling the modeling of volatile organic compounds, decay chains of multiple radionuclides, gas hydrates, tight and shale gas behavior, enhanced oil recovery, and supercritical water and CO 2 . Derivatives and descendants of the basic TOUGH code include coupled multi-phase flow and reactive chemical transport; coupled thermo-hydrologic-mechanical processes; inverse modeling for parameter estimation, sensitivity analysis, and uncertainty quantification; and parallelization for multi-core PCs, workstation clusters, and supercomputers. The TOUGH codes have been applied to a large variety of problems, including geothermal and petroleum reservoir engineering, nuclear waste and CO 2 geologic sequestration, subsurface environmental remediation, methane gas hydrate production, compressed air energy storage, and many other energy and environmental applications. Finally, the international TOUGH user community currently numbers almost 400 organizations (research laboratories, government agencies, private companies, universities, etc.) in over 60 countries.

99 GENERAL AND MISCELLANEOUS↗

Ab Initio-Based Bond Order Potential for Arsenene Polymorphs Developed via Hierarchical Reinforcement Learning

Arsenene, a less-explored two-dimensional material, holds the potential for applications in wearable electronics, memory devices, and quantum systems. This study introduces a bond-order potential model with Tersoff formalism, the ML-Tersoff, which leverages multireward hierarchical reinforcement learning (RL), trained on an ab initio data set. This data set covers a spectrum of properties for arsenene polymorphs, enhancing our understanding of its mechanical and thermal behaviors without the complexities of traditional models requiring multiple parameter sets. Our RL strategy utilizes decision trees coupled with a hierarchical reward strategy to accelerate convergence in high-dimensional continuous search spaces. Unlike the Stillinger-Weber approach, which demands separate formalisms for buckled and puckered forms, the ML-Tersoff model concurrently captures multiple properties of the two polymorphs by effectively representing the local environment, thereby avoiding the need for different atomic types. Here, we apply the ML model to understand the mechanical and thermal properties of the arsenene polymorphs and nanostructures. We observe an inverse relationship between the critical strain and temperature in arsenene. Thermal conductivity calculations in nanosheets show good agreement with ab initio data, reflecting a decrease in thermal conductivity attributable to increased anharmonic effects at higher temperatures. We also apply the model to predict the thermal behavior of arsenene nanotubes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Robust multiresonant nonlocal metasurfaces by rational design

Abstract Dielectric metasurfaces supporting optical resonances have become a promising platform for quantum and nonlinear optics. However, resonant metasurfaces remain limited in their capacity to independently control the behavior of many distinct resonances despite efforts in computational optimization and inverse design. In this work, we overcome longstanding limitations by introducing a generalized rational design paradigm based on symmetry. Specifically, we use symmetry-broken metasurfaces with periodic “quadromer” lattices comprised of four nanostructures per unit cell to enable extensive control of multiple optical resonances. The rationally designed metasurfaces are readily fabricable, and we experimentally demonstrate metasurfaces that support up to four high Q-factor resonances with deliberately chosen free-space polarizations, spectral separations, and mode profiles. Our design paradigm may unlock new applications for multiresonant metasurfaces in quantum and nonlinear optics, optical sensing, and augmented reality displays.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

OpenACC directive-based GPU acceleration of an implicit reconstructed discontinuous Galerkin method for compressible flows on 3D unstructured grids

In this study, we use a combination of modeling techniques to describe the relationship between fracture radius that might be accomplished in a hypothetical enhanced geothermal system (EGS) and drilling distance required to create and access those fractures. We use a combination of commonly applied analytical solutions for heat transport in parallel fractures and 3D finite-element method models of more realistic heat extraction geometries. For a conceptual model involving multiple parallel fractures developed perpendicular to an inclined or horizontal borehole, calculations demonstrate that EGS will likely require very large fractures, of greater than 300 m radius, to keep interfracture drilling distances to ~10 km or less. As drilling distances are generally inversely proportional to the square of fracture radius, drilling costs quickly escalate as the fracture radius decreases. It is important to know, however, whether fracture spacing will be dictated by thermal or mechanical considerations, as the relationship between drilling distance and number of fractures is quite different in each case. Information about the likelihood of hydraulically creating very large fractures comes primarily from petroleum recovery industry data describing hydraulic fractures in shale. Those data suggest that fractures with radii on the order of several hundred meters may, indeed, be possible. The results of this study demonstrate that relatively simple calculations can be used to estimate primary design constraints on a system, particularly regarding the relationship between generated fracture radius and the total length of drilling needed in the fracture creation zone. Comparison of the numerical simulations of more realistic geometries than addressed in the analytical solutions suggest that simple proportionalities can readily be derived to relate a particular flow field.

15 GEOTHERMAL ENERGY↗