Search NASA⌕ Search

SEARCH · Search NASA

Results for “Layered cathode”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

Electrochemical cleaning: An in-Situ method to reverse chromium poisoning in solid oxide fuel cell cathodes

Chromium poisoning is one of the primary factors that affect solid oxide fuel cell (SOFC) durability. In this study, an electrochemical cleaning method has been employed to reverse the effects of chromium poisoning. Two cells were fabricated and poisoned under identical conditions by operating them at 800°C in the presence of a Cr source. Both poisoned cells exhibited a significant reduction in maximum power density and an increase in polarization resistance. One of the poisoned cells, designated as the baseline cell, was cooled to room temperature after poisoning. Microstructural observation of the baseline cell showed significant contamination of the cathode active layer by chromium oxide and (Cr,Mn) spinel deposits. The other poisoned cell was electrochemically cleaned for two hours under a mild electrolytic condition. As a result of the electrochemical cleaning process, the chromium oxide deposits were substantially removed leading to a significant reduction of Cr concentration in the cathode, especially at the cathode/electrolyte interface. Furthermore, a substantial fraction of the cell performance loss was also reversed. To the best of our knowledge, this is a first demonstration of reversing the effects of chromium poisoning using a rapid in-situ process.

30 DIRECT ENERGY CONVERSION↗

Rinse-Free, Sodium-Efficient Synthesis of O3-Type Layered Oxide Materials Enabled by Acetate Precursors

Sodium-ion batteries (SIBs) are a sustainable alternative to lithium-ion systems for global electrification, with O3-type layered oxide cathodes offering high specific capacity and feasibility of scalable synthesis. Industrial co-precipitation synthesis of these cathodes typically uses transition metal sulfates, requiring extensive water rinsing to remove Na 2 SO 4 impurities, a process that consumes significant water and risks residual inactive phases if incomplete. Here, this work introduces a rinse-free, resource-efficient approach using metal acetate precursors. Residual sodium acetate in non-rinsed precursors decomposes during sintering to generate Na 2 CO 3 in situ, partially substituting an external sodium resource (e.g., NaOH and Na 2 CO 3 ) and reducing its consumption by ∼18–20%. Phase-pure O3-Na 1.0 Ni 1/3 Fe 1/3 Mn 1/3 O 2 (NFM111) cathodes synthesized via this method exhibit microstructure and electrochemical performance comparable to rinsed sulfate-derived counterparts, with initial capacities of 141 mAh g −1 at C/20 (7.5 mA g −1 ). By eliminating rinsing and minimizing sodium reagent use, this acetate-based route enhances sustainability and scalability of layered oxide production for SIBs.

acetate vs. sulfate↗

Suppression of voltage-decay in Li 2 MnO 3 cathode via reconstruction of layered-spinel coexisting phases

Voltage decay, i.e., the voltage decrease during electrochemical cycling, has been a decade-long challenge for lithium-ion batteries. This issue not only leads to a substantial loss of energy density, but also raises challenges for the battery management system, hindering the commercial application of high capacity lithium-rich oxide. Here, we show that through a combination of electrochemical conditioning and thermal treatment, Li 2 MnO 3 , the parent compound of lithium-rich oxide, which typically displays severe voltage and capacity decay, could be converted into a new phase that essentially suppresses the voltage decay with improved capacity retention and rate performance. Furthermore, by combining atomic-sensitive nuclear magnetic resonance, differential electrochemical mass spectrometry and synchrotron-based resonant inelastic X-ray scattering, we disclose that treatment triggers the formation of three-coexisting phases, i.e., the lithium-rich layered, spinel and defect spinel phases, which enables improved reversibility of the oxygen redox activity and enhanced manganese redox reactions in the initial cycle. Our findings suggest the key role of the local structure in the voltage decay problem and provide insights for material optimizations towards lithium- and manganese-rich cathodes without the voltage decay.

25 ENERGY STORAGE↗

Dual Protective Mechanism of AlPO 4 Coating on High-Nickel Cathode Material for High Energy Density and Long Cycle Life Lithium-Ion Batteries

Cathode material with high nickel content is a promising candidate for the future generation of Li-ion batteries (LIBs). However, severe structural degradation during cycling limits its practical use, especially for electric vehicles. Herein, AlPO 4 nanoparticles were synthesized and then coated onto the surface of a high-nickel layer-structured cathode via a dry coating method. The AlPO 4 nanoparticles coating significantly improved the cycling stability from 69.2% to over 80% capacity retention after 140 cycles. Furthermore, the structure and chemical composition of the AlPO 4 -coated cathode was investigated by XRD, SEM, XPS, and STEM. Compared with the non-coated cathode, we revealed a dual protective mechanism for enhanced cycling stability, where Al doping and Li 3 PO 4 coating play synergistic roles in protecting cathode material through long-term cycling. This work demonstrates a facile and environmentally friendly approach toward improving the performance of high-nickel LIB cathodes, which can be easily scaled up for industrial applications.

25 ENERGY STORAGE↗

Electron and proton conductivity of Fe-N-C cathodes for PEM fuel cells: A model-based electrochemical impedance spectroscopy measurement

Impedance spectra of a PEM fuel cell with three Fe-N-C cathodes have been measured under the H 2 /N 2 testing regime. The spectra have been fitted using a recently developed physics-based impedance model, which takes into account finite proton ($σ_p$) and electron ($σ_e$) conductivity of the oxygen-free cathode catalyst layer. Fitting allowed to extract numerical data for $σ_p$, $σ_e$, the double layer capacitance, and the inductance of cables used for measuring impedance spectra. The values of σp and σe are close to what previously found for standard Pt/C electrodes, which is found for the first time using PGM-free catalysts. The method enables simultaneous measurement of reference proton and electron conductivity of PEMFC cathode.

25 ENERGY STORAGE↗

Impact of Catalyst Ink Dispersing Solvent on PEM Fuel Cell Performance and Durability

The dispersing solvent used for fuel cell catalyst ink preparation plays a vital role in establishing the resulting morphology of the electrode layers, which in turn will impact the performance of proton exchange membrane (PEM) fuel cells. In this study, we report the impact of various ionomer dispersion solvents on PEM fuel cell performance and durability; two aqueous (1-propanol/water and 2-propanol/water) and several non-aqueous dispersing solvents (ethylene glycol and 1,2-butanediol) are compared. The cathode catalyst layer (CCL) fabricated using inks prepared with 1-propanol/water (3:1, w/w) exhibited the best initial performance followed by the CCL prepared using ethylene glycol. The CCLs made from non-aqueous ethylene glycol and 1,2-butanediol exhibited the best durability upon accelerated stress testing. Scanning transmission electron microscopy combined with energy dispersive X-ray spectroscopy indicated that, after the stress test, the distribution of both the Nafion ionomer and Pt nanoparticles within the CCLs prepared with non-aqueous ionomer dispersions underwent less change than those prepared with aqueous dispersions, which is responsible for the improved durability

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Discovery of a high-pressure phase of rutile-like CoO 2 and its potential as a cathode material

Due to the structural failure of layered CoO 2 , there has been considerable effort to improve the reversible capacity of commercial LiCoO 2 cathode materials. Using a global structural search, we have discovered a rutile-like CoO 2 phase as the ground state at 50 GPa. The material is thermally, mechanically and dynamically stable, even after removing the pressure. We show that, when lithiated, this LiCoO 2 material can serve as an improved cathode material for Li-ion batteries. Its many advantages include good structural stability against transition metal migration and oxygen loss, one-dimensional channels for Li ion diffusion with variable energy barriers (0.36–0.86 eV), enhanced ionic mobility, and good intrinsic electronic conductivity brought about by its metallic band structure. Furthermore, with a voltage platform of 3.2–3.8 V, it provides better stability against conventional carbonate solvents than conventional layered cathode materials (>4.0 V). All these features demonstrate that the non-layered CoO 2 phase synthesized at high pressure would be a promising cathode material, providing a performance beyond that of the currently used layered phase.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Complementary Effects of Mg and Cu Incorporation in Stabilizing the Cobalt-Free LiNiO 2 Cathode for Lithium-Ion Batteries

Since the discovery of LiNiO 2 several decades ago, a new era of electric vehicles demanding high-energy-density lithium-ion batteries (LIBs) has recently rebooted the interest in this cathode material to eliminate the dependence on expensive and scarcely available cobalt. However, LiNiO 2 has been plagued by cycle instability, thermal instability, and air instability. We present here an exploration of the mutual interaction of magnesium and copper in stabilizing the cobalt-free LiNiO 2 cathode. Although Mg doping is beneficial for the robustness of the bulk structure of LiNiO 2 , surface characterization results of Mg-doped LiNiO 2 implies the need for further surface protection. To that end, we have incorporated Cu in addition to Mg in that Cu stabilizes the surface of Mg-doped LiNiO 2 by forming a protective stable surface layer without harming the bulk. Notable variations of the surface residual lithium composition (Li Li 2 CO 3 /Li LiOH ) along with the incorporation of stabilizers are also discussed. The harmony between Mg and Cu with as little as 0.5 atom % Mg and 0.3 atom % Cu significantly enhances the specific energy and cycle life of LiNiO 2 . Furthermore, this study demonstrates how the co-incorporation of optimal dopants can help stabilize both the bulk and surface and provides new insights toward developing cobalt-free layered oxide cathodes for high-energy-density LIBs.

25 ENERGY STORAGE↗

Gas temperature and electron density profiles in an argon dc microdischarge measured by optical emission spectroscopy

Optical emisssion spectroscopy was employed to study a high pressure (100 s of Torr), slot-type (600 {mu}m interelectrode gap), argon dc microdischarge, with added traces of nitrogen. Spatially resolved gas temperature profiles were obtained by analyzing rovibrational bands of the N{sub 2} first positive system. The gas temperature peaked near the cathode and increased with current. The contribution of Stark broadening to the hydrogen H{sub {beta}} emission lineshape was used to extract the electron density. The axial distribution of electron density as well as visual observation revealed that the microdischarge positive column was highly constricted. The electron density near the sheath edge increased with both pressure and current.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Enhanced long-term cyclability in Li-Rich layered oxides by electrochemically constructing a Li x TM 3-x O 4 -type spinel shell

The poor long-term cycling stability, including the fast capacity fade and the severe voltage decay, has become the main concern hindering the practical application of Li-rich layered oxides, a promising cathode for high- energy-density Li-ion battery. Herein, we design and electrochemically construct a ~10 nm-thick Li x TM 3-x O 4 - type (TM ¼Ni, Co, Mn, 0 3 O 4 -type spinel phase and the good Liþconductivity of LiMn 2 O 4 -type spinel phase. Systemic structural and electrochemical analysis demonstrate that, it slows down the activation rate of Li 2 MnO 3 component and efficiently alleviates the lattice O loss at high voltage (>4.5 V) and Mn dissolution, thereby suppressing the structural degradation from the layered phase to the spinel phase in the bulk, eventually significantly enhancing the long-term cycling stability. This study adds richness into the Mn-based spinel phase system and provides a new heterostructure design strategy to improve the electrochemical performance of Li-rich layered cathodes and beyond.

25 ENERGY STORAGE↗

Decoupling mass transport and electron transfer by a double-cathode structure of a Li-O 2 battery with high cyclic stability

Aprotic lithium-oxygen (Li-O 2 ) batteries have attracted extensive attention due to their ultrahigh theoretical energy density. However, slow and undesired electron transfer during cathodic reactions causes low cyclic stability in these batteries. Here, in this paper, we demonstrate that O 2 mass transport and electron transfer for cathodic reactions in Li-O 2 batteries could be decoupled by a double-cathode structure that efficiently enables stable electron transfer between the cathode and Li 2 O 2 /O 2 . This resolves various side reactions and slow Li 2 O 2 reaction kinetics issues in conventional Li-O 2 batteries, leading to stable operation of the cell for nearly 2 months at a capacity of 0.2 and 5 mAh cm -2 , with more than 4- and 10-fold increases in cycle life when compared with single-cathode batteries. These remarkable improvements in the cyclic stability of Li-O 2 batteries with double cathodes provide an interesting concept for improving the operational stability of other metal-rechargeable batteries with conversion-type chemistry.

25 ENERGY STORAGE↗

Photo-Crosslinkable Naphthalene Diimide Polymer for Solution Processed n-i-p Perovskite Solar cells

Lead-halide perovskite has attracted tremendous attention due to its extraordinary optoelectronic properties.1 Charge transport layers play an important role in both solar cell device efficiency and long-term stability.2 Here we used a photo-crosslinkable polymer for n-i-p perovskite solar cells. Compared to the non-crosslinkable counterpart, we see an overall improved open-circuit voltage and efficiency in mixed-cation mixed-halide perovskite solar cell using the crosslinked naphthalene diimide polymer (NDI-CL) as cathode modification layer.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Advanced Lithium-ion Batteries with High Specific Energy and Improved Safety for Nasa's Missions

High Energy Materials ( Cathodes, anodes and high voltage and safe electrolyte are required to meet the needs of the future space missions. A. Cathodes: The layered layered composites of of Li2MnO3 and LiMO2 are promising Power capability of the materials, however requires further improvement. Suitable morphology is critical for good performance and high tap (packing) density. Surface coatings help in the interfacial kinetics and stability. B. Electrolytes: Small additions of Flame Retardant Additives improves flammability without affecting performance (Rate and cycle life). 1.0 M in EC+EMC+TPP was shown to have good performance against the high voltage cathode; Performance demonstrated in large capacity prototype MCMB- LiNiCoO2 Cells. Formulations with higher proportions are looking promising. Still requires further validation through abuse tests (e.g., on 18650 cells).

NASA Missions↗

Improving the Long-term Cycle Performance of xLi 2 MnO 3 ·(1-x)LiMeO 2 /Li 4 Ti 5 O 12 Cells via Prelithiation and Electrolyte Engineering

Toward the development of high energy density and long lifetime batteries for behind-the-meter storage (BTMS) applications, Li- and Mn-rich layered oxide cathode (xLi 2 MnO 3 ·(1-x)LiMeO 2 , Me = Ni, Mn, and etc., LMR-NM) and Li 4 Ti 5 O 12 (LTO) anode system was examined. To mitigate the major degradation mechanisms at each electrode (i.e., loss of Li inventory (LLI) at the anode and transition metal dissolution and oxygen release at the cathode), two approaches were taken—prelithiating the LTO electrode and varying the electrolyte solvent compositions. The effect of prelithiation and electrolyte engineering on the long-term cycle performance of LMR-NM/LTO cells were systematically evaluated via electrochemical analyses and post-mortem characterizations. By using a prelithiated LTO anode and supplying additional Li to the system, the capacity retention of LMR-NM/LTO system was improved. The degree of enhancement was dependent on the types of electrolytes used, as their decomposition products determined the level of LLI. With increased capacity retention, however, the cathode was utilized to a greater extent, resulting in more severe loss of the cathode active material. Thus, all degradation mechanisms should be considered comprehensively when designing high performance LMR-NM/LTO cells to account for their complex interplay.

25 ENERGY STORAGE↗

First-Principles Study of Lithium Cobalt Spinel Oxides: Correlating Structure and Electrochemistry

Embedding a lithiated cobalt oxide spinel (Li 2 Co 2 O 4 , or LiCoO 2 ) component or a nickel-substituted Li2Co 1-x NixO 2 analogue in structurally integrated cathodes such as xLi 2 MnO 3 .(1-x)LiM'O 2 (M' = Ni/Co/Mn) has been recently proposed as an approach to advance the performance of lithium-ion batteries. Here, we first revisit the phase stability and electrochemical performance of LiCoO 2 synthesized at different temperatures using density functional theory calculations. Consistent with previous studies, we find that the occurrence of low- and high-temperature structures (i.e., cubic lithiated spinel LT-LiCoO 2 ; or Li 2 Co 2 O 4 (Fd$\overline{3m}$) vs trigonal-layered HT-LiCoO 2 (R$\overline{3m}$), respectively) can be explained by a small difference in the free energy between these 20 30 40 50 60 70 80 26 two compounds. Additionally, the observed voltage profile of a Li/LiCoO 2 cell for both cubic and trigonal phases of LiCoO 2 , as well as the migration barrier for lithium diffusion from an octahedral (O h ) site to a tetrahedral site (T d ) in Fd$\overline{3m}$ LT-Li 1-x CoO 2 , has been calculated to help understand the complex electrochemical charge/discharge processes. A search of LiCo x M 1-x O 2 lithiated spinel (M' = Ni or Mn) structures and compositions is conducted to extend the exploration of the chemical space of Li-Co-Mn-Ni-O electrode materials. We predict a new lithiated spinel material, LiNi 0.8125 Co 0.1875 O 2 (Fd$\overline{3m}$), with a composition close to that of commercial, layered LiNi 0.8 Co 0.05 Al 0.05 O 2 , which may have the potential for exploitation in structurally integrated, layered spinel cathodes for next generation lithium-ion batteries.

25 ENERGY STORAGE↗

Effect of the grain arrangements on the thermal stability of polycrystalline nickel-rich lithium-based battery cathodes

One of the most challenging aspects of developing high-energy lithium-based batteries is the structural and (electro)chemical stability of Ni-rich active cathode materials at thermally-abused and prolonged cell cycling conditions. Here, we report in situ physicochemical characterizations to improve the fundamental understanding of the degradation mechanism of charged polycrystalline Ni-rich cathodes at elevated temperatures (e.g., ≥ 40 °C). Using multiple microscopy, scattering, thermal, and electrochemical probes, we decouple the major contributors for the thermal instability from intertwined factors. Our research work demonstrates that the grain microstructures play an essential role in the thermal stability of polycrystalline lithium-based positive battery electrodes. We also show that the oxygen release, a crucial process during battery thermal runaway, can be regulated by engineering grain arrangements. Furthermore, the grain arrangements can also modulate the macroscopic crystallographic transformation pattern and oxygen diffusion length in layered oxide cathode materials.

36 MATERIALS SCIENCE↗

Organic photovoltaic cell incorporating electron conducting exciton blocking layers

The present disclosure relates to photosensitive optoelectronic devices including a compound blocking layer located between an acceptor material and a cathode, the compound blocking layer including: at least one electron conducting material, and at least one wide-gap electron conducting exciton blocking layer. For example, 3,4,9,10 perylenetetracarboxylic bisbenzimidazole (PTCBI) and 1,4,5,8-napthalene-tetracarboxylic-dianhydride (NTCDA) function as electron conducting and exciton blocking layers when interposed between the acceptor layer and cathode. Both materials serve as efficient electron conductors, leading to a fill factor as high as 0.70. By using an NTCDA/PTCBI compound blocking layer structure increased power conversion efficiency is achieved, compared to an analogous device using a conventional blocking layers shown to conduct electrons via damage-induced midgap states.

14 SOLAR ENERGY↗

Synthesis and Electrochemical and Structural Investigations of Oxidatively Stable Li 2 MoO 3 and x Li 2 MoO 3 ·(1 – x )LiMO 2 Composite Cathodes

We report the structural evolution of Li 2 MoO 3 during electrochemical delithiation/lithiation is reported. Li 2 MoO 3 undergoes an irreversible crystalline to amorphous transformation which starts during the first delithiation step and gradually proceeds throughout subsequent cycles. This observation is supported by complementary data obtained from X-ray diffraction (XRD), Raman spectroscopy, and transmission electron microscopy (TEM). The amorphization does not prevent reversible Li storage, and the Li 2 MoO 3 cathodes exhibit initial capacities of 147 mAh/g (corresponding to 0.87 Li cycled per formula unit) at an average operating potential ~2.5 V vs Li/Li + with reasonably good cycling stability (81% capacity retention after 50 cycles). In-situ mass spectrometry studies reveal the amorphization of Li 2 MoO 3 does not involve the release of oxygen gas even when charged to very positive potentials (i.e., 4.8 V vs Li/Li + ). The Li storage properties and excellent oxidative stability of Li 2 MoO 3 make it a promising candidate to improve the performance of traditional LiMO 2 compounds in layered–layered composite cathodes with the general formula x Li 2 MoO 3 ·(1 – x)LiMO 2 . Multiple synthesis routes were explored to prepare composites with x = 0.10–0.15, and their structure was characterized using XRD and time-of-flight neutron diffraction. Lastly, preliminary characterization of these materials shows that Li 2 MoO 3 improves the cycling stability of an NMC cathode, presumably by mitigating detrimental structural rearrangement at high states of charge.

36 MATERIALS SCIENCE↗