Search NASA⌕ Search

SEARCH · Search NASA

Results for “Material Attributes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

Tailoring Cementitious Materials Towards Value-Added Use of Large CO 2 Volumes

A novel method was developed for the use of carbon dioxide as a raw material in production of hydraulic cements. The solid raw materials were selected to produce a chemistry that is amenable to the formation of alkali aluminosilicate hydrates and carbonates. These raw materials were first pelletized using a relatively low moisture content in the presence of carbon dioxide gas. The resulting pellets were then subjected to milling action in the presence of carbon dioxide in order to mechanochemically transform them into a hydraulic cement comprising largely of alkali aluminosilicates and metastable carbonates. Hydration of this hydraulic cement produces an integrated binder comprising largely of alkali aluminosilicate hydrates and finely dispersed crystalline carbonates. Analytical chemistry and physical test methods were employed in order to evaluate the composition and properties of pellets and the resultant hydraulic cement. The CO 2 uptake of the cement was measured at about 10 wt.%, which was raised with increasing milling duration in a carbon dioxide environment. The composition of the hydraulic cement was refined to further increase the use of abundant and market-limited industrial byproducts as raw materials, and to produce a balance of performance characteristics that meet standard requirements. Concrete materials were prepared with the hybrid hydraulic cement developed in the project, and were thoroughly characterized. The hydraulic cement formulation was further refined in order to produce concrete materials with desired deicer salt scaling resistance. The fresh mix attributes of the hybrid cement concrete were thoroughly characterize in order to evaluate its rheological characteristics, bleeding and plastic shrinkage cracking resistance. The resultant concrete was found to produce mechanical, physical and durability characteristics that were superior to those of conventional Portland cement concrete. The fresh mix rheology, bleeding and plastic shrinkage cracking resistance of the hybrid cement concrete were found to be compatible with the mainstream construction practices. Scalability and compatibility with industrial-scale practices are key to the commercial success of the new class of hydraulic cements developed in this project. These attributes cannot be easily assessed in laboratory-scale investigations. Energy-based models were developed to enable scale-up of the process. Pilot-scale implementation of the process in a power plant was successful. Theoretical analyses complemented with pilot-scale experimental investigations indicated that the transformation from laboratory- to pilot-scale mechanochemical processing can reduce the milling duration by up to 85%. The data produced in pilot-scale processing of the hydraulic cement was used to assess the net carbon footprint of the resultant binder, which was found to be negative due to uptake of carbon dioxide in the process. The energy content of the new hydraulic cement was significantly below that of Portland cement, and it also offered favorable economics. Significant support has been raised for industrial-scale demonstration and commercialization of the technology. A theoretical framework was established based on thermodynamic and diffusion principles to explain the mechanochemical capture and value-added use of carbon dioxide in hydraulic cement production.

01 COAL, LIGNITE, AND PEAT↗

Improving the thermoelectric performance in Mg 3+ x Sb 1.5 Bi 0.49 Te 0.01 by reducing excess Mg

Here, the thermoelectric performance of Mg 3+x Sb 1.5 Bi 0.49 Te 0.01 was improved by reducing the amount of excess Mg (x = 0.01-0.2). A 20% reduction in effective lattice thermal conductivity at 600 K was observed by decreasing the nominal x from 0.2 to 0.01 in Mg 3+x Sb 1.5 Bi 0.49 Te 0.01 , leading to a 20% improvement in the figure-of-merit zT . Since materials with different amounts of Mg have similar electronic properties, the enhancement is attributed primarily to the reduction in thermal conductivity. Lastly, it is known that excess Mg is required to make n-type Mg 3+x Sb 1.5 Bi 0.49 Te 0.01 ; however, too much excess Mg in the material increases the thermal conductivity and is therefore detrimental for the overall thermoelectric performance of the material.

36 MATERIALS SCIENCE↗

Effect of plastic deformation on deuterium retention and release in tungsten

The effect of severe plastic deformation on the deuterium retention in tungsten exposed to high-flux low-energy plasma (flux ∼ 10{sup 24 }D/m{sup 2}/s, energy ∼ 50 eV, and fluence up to 3 × 10{sup 26 }D/m{sup 2}) at the plasma generator Pilot-PSI was studied by thermal desorption spectroscopy and scanning electron microscopy. The desorption spectra in both reference and plastically deformed samples were deconvolved into three contributions attributed to the detrapping from dislocations, deuterium-vacancy clusters, and pores, respectively. The plastically induced deformation, resulting in high dislocation density, does not change the positions of the three peaks, but alters their amplitudes as compared to the reference material. The appearance of blisters detected by scanning electron microscopy and the desorption peak attributed to the release from pores (i.e., deuterium bubbles) were suppressed in the plastically deformed samples but only up to a certain fluence. Beyond 5 × 10{sup 25 }D/m{sup 2}, the release from the bubbles in the deformed material is essentially higher than in the reference material. Based on the presented results, we suggest that a dense dislocation network increases the incubation dose needed for the appearance of blisters, associated with deuterium bubbles, by offering numerous nucleation sites for deuterium clusters eventually transforming into deuterium-vacancy clusters by punching out jogs on dislocation lines.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Thermal characterization and properties of a copper-diamond composite

The thermal properties of a commercial copper-diamond composite were measured from below -50°C to above 200°C. The results of thermal expansion, heat capacity, and thermal diffusivity were reported. These data were used to calculate the thermal conductivity of the composite as a function of temperature in the thickness direction. These results are compared with estimated values based on a simple mixing rule and the temperature dependence of these physical properties is represented by curve fitting equations. These fitting equations can be used for thermal modeling of practical devices/systems at their operation temperatures. The results of the mixing rule showed a consistent correlation between the amount of copper and diamond in the composite, based on density, thermal expansion, and heat capacity measurements. However, there was a disparity between measured and estimated thermal diffusivity and thermal conductivity. These discrepancies can be caused by many intrinsic material issues such as lattice defects and impurities, but the dominant factor is attributed to the large uncertainty of the interfacial thermal conductance between diamond and copper.

36 MATERIALS SCIENCE↗

Partial oxidation of liquid hydrocarbons in the presence of oxygen-conducting supports: Effect of catalyst layer deposition

Ni-substituted barium hexaaluminate (BNHA) catalysts supported onto gadolinium-doped ceria (GDC), an oxygen-conductor, were prepared using two different methods: (1) conventional incipient wetness impregnation (IWI), in which a non-porous GDC support was impregnated in the conventional manner with aqueous precursors, then dried and calcined to form a supported hexaaluminate, and (2) solid-state mixing (SSM), in which solid hexaaluminate and GDC particles were mechanically ground together and thermally treated to produce a final catalyst. These catalysts were compared to bulk, unsupported BNHA; 3 wt% Ni/alumina; and 3 wt% Ni/GDC (the latter two prepared by conventional impregnation) for the partial oxidation (POX) of n-tetradecane. The reaction studies included examining the effect of 50 ppm S as dibenzothiophene (DBT) and 5 wt% 1-methylnaphthalene (MN) on the product yield under POX conditions. Temperature programmed oxidation (TPO) was used to characterize carbon formation in the reactor. The materials were characterized by BET, ICP-OES, XRD, and SEM/EDS prior to the reaction tests. Characterization of the two GDC-supported BNHA catalysts prior to the reaction studies indicated no significant differences in the bulk composition, surface area, and crystal structure. However, SEM images showed a larger amount of exposed GDC support surface area for the material prepared by IWI. Both of the GDC-supported BNHA materials demonstrated greatly reduced deactivation, with significantly reduced carbon formation compared to bulk BNHA. This was attributed to the oxygen-conducting property of the GDC, which reduced the rate of deactivation of the reaction sites by DBT and MN. The material prepared by IWI demonstrated more stable hydrogen and carbon monoxide yield than the material prepared by SSM. Although both catalysts deactivated in the presence of DBT and MN, the activity of the catalyst prepared by IWI recovered activity more quickly after the contaminants were removed. This material also maintained >50% of its initial hydrogen yield for more than 4 h after exposure to DBT and MN, while the hydrogen for the material prepared by SSM dropped to this same level within 2 h. Incipient wetness impregnation appears to provide a higher degree of interaction between the oxygenconducting GDC support and the hexaaluminate, resulting in less rapid deactivation, which appears to be due primarily to carbon deposition.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

New strategy to the controllable synthesis of CuInS{sub 2} hollow nanospheres and their applications in lithium ion batteries

A new strategy has been presented to the controllable synthesis of CuInS{sub 2} hollow nanospheres based on the Cu{sub 2}O solid nanospheres as the precursor in the absence of any surfactant. Specifically, the CuInS{sub 2} hollow nanospheres result from hydrothermal transformation of the intermediate Cu{sub 7}S{sub 4} hollow nanospheres derived from Cu{sub 2}O solid nanosphere precursor by the Kirkendall effect in the conversion process. The CuInS{sub 2} hollow nanospheres with diameters of about 250 nm are assembly of nanoparticles with an average size of 20-30 nm. The composition, structure, and morphology of the Cu{sub 2}O precursor, the Cu{sub 7}S{sub 4} intermediate, and final CuInS{sub 2} product have been, respectively, characterized by X-ray diffraction (XRD), field-emission scanning electron microscopy (FESEM), and transmission electron microscopy (TEM) with selected area electron diffraction (SAED). Different from investigation of photovoltaic properties, in this work, the as-prepared CuInS{sub 2} hollow nanospheres have been explored as anode materials for rechargeable lithium ion batteries. They deliver a large initial discharge capacity of 1144 mAh g{sup -1} and exhibit good cycle performance with a discharge capacity of 265 mAh g{sup -1} after 20 cycles, which are superior to those of CuInS{sub 2} nanoparticles. The suitable surface area and relatively stable structure of the CuInS{sub 2} hollow nanospheres play an important role in their enhanced electrochemical performance as anode materials. - Graphical abstract: CuInS{sub 2} hollow nanospheres was successfully prepared from Cu{sub 2}O solid nanospheres in the absence of any surfactant, which can deliver a large initial discharge capacity of 1144 mAh g{sup -1} and exhibit good cycle performance. Highlights: Black-Right-Pointing-Pointer CuInS{sub 2} hollow nanospheres were synthesized hydrothermally from Cu{sub 2}O nanospheres. Black-Right-Pointing-Pointer The CuInS{sub 2} hollow nanospheres present high discharge capacities as anode materials. Black-Right-Pointing-Pointer Better cycling performance can be attributed to its hollow structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural and magnetic characterizations of Mn{sub 2}CrO{sub 4} and MnCr{sub 2}O{sub 4} films on MgO(001) and SrTiO{sub 3}(001) substrates by molecular beam epitaxy

In this report, we grow MnCr{sub 2}O{sub 4} (124) films, and Mn{sub 2}CrO{sub 4} (214) films, for comparison, on MgO and SrTiO{sub 3} (STO) substrates by oxygen-plasma-assisted molecular beam epitaxy and also carry out the measurements of the magnetization as a function of temperature (5-200 K) and external field (0-5 T) of these films. The results of magnetization versus temperature further show that ferrimagnetic transition (T{sub c}) occurs at 44 K for 214 films grown on both MgO and STO. The T{sub c} of 124 films raises to 45 K but is only observed for the film grown on STO. No or very weak magnetization is observed for the 124 films grown on MgO(001). The vanishing of the magnetization of the 124 films grown on MgO is attributed to the instability of spinel structure for Cr-rich films. Magnetic hysteresis curves of the films further show the magnetization saturation (M{sub s}) of 124 is <1/2 bohr magneton, which is noticeably smaller than the bulk M{sub s} {approx} 1 bohr magneton. The reduction of M{sub s} in these chromites films may result from the cation distribution in that Cr cations distribute in both A and B sites, which is different from the bulk materials. The distribution of Cr cations in both A and B is attributed to the low temperature growth and similar results have been found in previous growth of various ferrite films.

36 MATERIALS SCIENCE↗

Dynamics of plasma formation, relaxation, and topography modification induced by femtosecond laser pulses in crystalline and amorphous dielectrics

We have studied plasma formation and relaxation dynamics along with the corresponding topography modifications in fused silica and sapphire induced by single femtosecond laser pulses (800 nm and 120 fs). These materials, representative of high bandgap amorphous and crystalline dielectrics, respectively, require nonlinear mechanisms to absorb the laser light. The study employed a femtosecond time-resolved microscopy technique that allows obtaining reflectivity and transmission images of the material surface at well-defined temporal delays after the arrival of the pump pulse which excites the dielectric material. The transient evolution of the free-electron plasma formed can be followed by combining the time-resolved optical data with a Drude model to estimate transient electron densities and skin depths. The temporal evolution of the optical properties is very similar in both materials within the first few hundred picoseconds, including the formation of a high reflectivity ring at about 7 ps. In contrast, at longer delays (100 ps-20 ns) the behavior of both materials differs significantly, revealing a longer lasting ablation process in sapphire. Moreover, transient images of sapphire show a concentric ring pattern surrounding the ablation crater, which is not observed in fused silica. We attribute this phenomenon to optical diffraction at a transient elevation of the ejected molten material at the crater border. On the other hand, the final topography of the ablation crater is radically different for each material. While in fused silica a relatively smooth crater with two distinct regimes is observed, sapphire shows much steeper crater walls, surrounded by a weak depression along with cracks in the material surface. These differences are explained in terms of the most relevant thermal and mechanical properties of the material. Despite these differences the maximum crater depth is comparable in both material at the highest fluences used (16 J/cm{sup 2}). The evolution of the crater depth as a function of fluence can be described taking into account the individual bandgap of each material.

36 MATERIALS SCIENCE↗

Compressible, multiphase semi-implicit method with moment of fluid interface representation

A unified method for simulating multiphase flows using an exactly mass, momentum, and energy conserving Cell-Integrated Semi-Lagrangian advection algorithm is presented. The deforming material boundaries are represented using the moment-of-fluid method. Our new algorithm uses a semi-implicit pressure update scheme that asymptotically preserves the standard incompressible pressure projection method in the limit of infinite sound speed. The asymptotically preserving attribute makes the new method applicable to compressible and incompressible flows including stiff materials; enabling large time steps characteristic of incompressible flow algorithms rather than the small time steps required by explicit methods. Moreover, shocks are captured and material discontinuities are tracked, without the aid of any approximate or exact Riemann solvers. As a result, wimulations of underwater explosions and fluid jetting in one, two, and three dimensions are presented which illustrate the effectiveness of the new algorithm at efficiently computing multiphase flows containing shock waves and material discontinuities with large “impedance mismatch.”

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Statistical analysis of the chemical attribution signatures of 3-methylfentanyl and its methods of production

Chemical attribution of the origin of an illegal drug is a key component of forensic efforts aimed at combating illicit and clandestine manufacture of drugs and pharmaceuticals. The results of these studies yield detailed information on synthesis byproducts, reagents, and precursors that can be used to identify the method of manufacture. Here in the present work, chemical attribution signatures (CAS) associated with the synthesis of the analgesic 3-methylfentanyl, N-(3-methyl-1-phenethylpiperidin-4-yl)-N-phenylpropanamide, were investigated. Eighteen crude samples from six synthesis methods were generated, the analysis of which was used to identify signatures (i.e. chemical compounds) that were important in the discrimination of synthetic route. These methods were carefully selected to minimize the use of scheduled precursors, complicated laboratory equipment, number of steps, and extreme reaction conditions. Using gas and liquid chromatographies combined with time-of-flight mass spectrometry (GC-QTOF and LC-QTOF) over 160 distinct species were monitored. Lastly, analysis of this combined data set was performed using modern machine learning techniques capable of reducing the size of the data set, prioritizing key chemical attribution signatures, and identifying the method of production for blindly synthesized 3-methylfentanyl materials.

3-methylfentanyl↗

Characterising local environments in high energy density Li-ion battery cathodes: a combined NMR and first principles study of LiFe x Co 1-x PO 4

Olivine-type LiCoPO4 (LCP) is a high energy density lithium ion battery cathode material due to the high voltage of the Co2+/Co3+ redox reaction. However, it displays a significantly poorer electrochemical performance than its more widely investigated isostructural analogue LiFePO4 (LFP). The co-substituted LiFexCo1-xPO4 olivines combine many of the positive attributes of each end member compound and are promising next-generation cathode materials. Here, the fully lithiated x = 0, 0.25, 0.5, 0.75 and 1 samples are extensively studied using 31P solid-state nuclear magnetic resonance (NMR). Practical approaches to broadband excitation and for the resolution of the isotropic resonances are described. First principles hybrid density functional calculations are performed on the Fermi contact shift (FCS) contributions of individual M–O–P pathways in the end members LFP and LCP and compared with the fitted values extracted from the LiFexCo1-xPO4 experimental data. Combining both data sets, the FCS for the range of local P environments expected in LiFexCo1-xPO4 have been calculated and used to assign the NMR spectra. Due to the additional unpaired electron in d6 Fe2+ as compared with d7 Co2+ (both high spin), LFP is expected to have larger Fermi contact shifts than LCP. However, two of the Co–O–P pathways in LCP give rise to noticeably larger shifts and the unexpected appearance of peaks outside the range delimited by the pure LFP and LCP 31P shifts. This behaviour contrasts with that observed previously in LiFexMn1-xPO4, where all 31P shifts lay within the LiMnPO4–LFP range. Although there are 24 distinct local P environments in LiFexCo1-xPO4, these group into seven resonances in the NMR spectra, due to significant overlap of the isotropic shifts. The local environments that give rise to the largest contributions to the spectral intensity are identified and used to simplify the assignment. This provides a tool for future studies of the electrochemically-cycled samples, which would otherwise be challenging to interpret.

36 MATERIALS SCIENCE↗

Protecting Astronaut Medical Privacy: Review of Presentations and Publications for Attributability

Retrospective research and medical data collected on astronauts can be a valuable resource for researchers. This data can be requested from two separate NASA Archives. The Lifetime Surveillance of Astronaut Health (LSAH) holds astronaut medical data, and the Life Sciences Data Archive (LSDA) holds research data. One condition of use of astronaut research and medical data is the requirement that all abstracts, publications and presentations using this data must be reviewed for attributability. All final versions of abstracts, presentations, posters, and manuscripts must be reviewed by LSDA/LSAH prior to submission to a conference, journal, or other entities outside the Principal Investigator (PI) laboratory [including the NASA Export Control Document Availability Authorization (DAA) system]. If material undergoes multiple revisions (e.g., journal editor comments), the new versions must also be reviewed by LSDA/LSAH prior to re-submission to the journal. The purpose of this review is to ensure that no personally identifiable information (PII) is included in materials that are presented in a public venue or posted to the public domain. The procedures for submitting materials for review will be outlined. The process that LSAH/LSDA follows for assessing attributability will be presented. Characteristics and parameter combinations that often prompt attributability concerns will be identified. A published case report for a National Football League (NFL) player will be used to demonstrate how, in a population of public interest, a combination of information can result in inadvertent release of private or sensitive information.

Wear, M. L.↗

In-plane and interlaminar Iosipescu shear properties of various graphite fabric/epoxy laminates

The Iosipescu shear test method was used to measure the in-plane and interlaminar shear properties of four T300 graphite fabric/Fiberite 934 epoxy composite materials. Weave geometries tested included an Oxford weave, a 5-harness satin weave, an 8-harness satin weave, and a plain weave with auxiliary warp yarns. Both orthogonal and quasi-isotropic layup laminates were tested. In-plane and interlaminar shear properties were obtained for laminates of all four fabric types. Overall, few differences in shear properties attributable to the fabric weave pattern were observed. However, the auxiliary warp material was significantly weaker and less stiff in interlaminar shear parallel to its fill direction.

Adams, Donald F.↗

Improved silicon carbide for advanced heat engines

Work performed to develop silicon carbide materials of high strength and to form components of complex shape and high reliability is described. A beta-SiC powder and binder system was adapted to the injection molding process and procedures and process parameters developed capable of providing a sintered silicon carbide material with improved properties. The initial effort has been to characterize the baseline precursor materials (beta silicon carbide powder and boron and carbon sintering aids), develop mixing and injection molding procedures for fabricating test bars, and characterize the properties of the sintered materials. Parallel studies of various mixing, dewaxing, and sintering procedures have been carried out in order to distinguish process routes for improving material properties. A total of 276 MOR bars of the baseline material have been molded, and 122 bars have been fully processed to a sinter density of approximately 95 percent. The material has a mean MOR room temperature strength of 43.31 ksi (299 MPa), a Weibull characteristic strength of 45.8 ksi (315 MPa), and a Weibull modulus of 8.0. Mean values of the MOR strengths at 1000, 1200, and 14000 C are 41.4, 43.2, and 47.2 ksi, respectively. Strength controlling flaws in this material were found to consist of regions of high porosity and were attributed to agglomerates originating in the initial mixing procedures. The mean stress rupture lift at 1400 C of five samples tested at 172 MPa (25 ksi) stress was 62 hours and at 207 MPa (30 ksi) stress was 14 hours. New fluid mixing techniques have been developed which significantly reduce flaw size and improve the strength of the material. Initial MOR tests indicate the strength of the fluid-mixed material exceeds the baseline property by more than 33 percent.

Whalen, T. J.↗

Automated Process Planning for Embossing and Functionally Grading Materials via Site-Specific Control in Large-Format Metal-Based Additive Manufacturing

The potential for site-specific, process-parameter control is an attribute of additive manufacturing (AM) that makes it highly attractive as a manufacturing process. The research interest in the functionally grading material properties of numerous AM processes has been high for years. However, one of the issues that slows developmental progress in this area is process planning. It is not uncommon for manual programming methods and bespoke solutions to be utilized for site-specific control efforts. This article presents the development of slicing software that contains a fully automated process planning approach for enabling through-thickness, process-parameter control for a range of AM processes. The technique includes the use of parent and child geometries for controlling the locations of site-specific parameters, which are overlayed onto unmodified toolpaths, i.e., a vector-based planning approach is used in which additional information, such as melt pool size for large-scale metal AM processes, is assigned to the vectors. This technique has the potential for macro- and micro-structural modifications to printed objects. A proof-of-principle experiment is highlighted in which this technique was used to generate dynamic bead geometries that were deposited to induce a novel surface embossing effect, and additional software examples are presented that highlight software support for more complex objects.

36 MATERIALS SCIENCE↗

Chemical Profiles of the Oxides on Tantalum in State of the Art Superconducting Circuits

Abstract Over the past decades, superconducting qubits have emerged as one of the leading hardware platforms for realizing a quantum processor. Consequently, researchers have made significant effort to understand the loss channels that limit the coherence times of superconducting qubits. A major source of loss has been attributed to two level systems that are present at the material interfaces. It is recently shown that replacing the metal in the capacitor of a transmon with tantalum yields record relaxation and coherence times for superconducting qubits, motivating a detailed study of the tantalum surface. In this work, the chemical profile of the surface of tantalum films grown on c‐plane sapphire using variable energy X‐ray photoelectron spectroscopy (VEXPS) is studied. The different oxidation states of tantalum that are present in the native oxide resulting from exposure to air are identified, and their distribution through the depth of the film is measured. Furthermore, it is shown how the volume and depth distribution of these tantalum oxidation states can be altered by various chemical treatments. Correlating these measurements with detailed measurements of quantum devices may elucidate the underlying microscopic sources of loss.

36 MATERIALS SCIENCE↗

Strain–Chemical Gradient and Polarization in Metal Halide Perovskites

Metal halide perovskites (MHPs) have attracted broad research interest due to their outstanding optoelectronic performance. This performance has been attributed in part to the presence of polarization in these materials. However, the precise effects of chemical environment and strain condition on the polar states in MHPs have largely been missing. Herein it is revealed for the first time that chemical gradient is directly coupled with strain gradient in CH 3 NH 3 PbI 3 . This strain–chemical gradient induces an electric polarization that can potentially affect charge carrier dynamics. Furthermore, it is unveiled that this electric polarization—unlike ferroelectricity that only exists in noncentrosymmetric materials—can be present in both tetragonal and cubic phases of CH 3 NH 3 PbI 3 . This suggests that the strain–chemical gradient induced polarization is a more convincing explanation of the outstanding photovoltaic properties of MHPs than the hotly debated ferroelectric polarization. Finally, a mechanism of how this polarization impacts photovoltaic action is proposed, which offers insightful advances in the development of MHPs.

36 MATERIALS SCIENCE↗

Anomalous Magnetoelectric Coupling in the Paramagnetic State of a Chiral and Polar Magnet

Abstract Chiral magnets are excellent platforms for studying intertwined spin, charge, orbit, and lattice degrees of freedom in solid‐state materials. In this work, the anomalous magnetoelectric behavior in a chiral magnet K 2 Co 2 (SO 4 ) 3 is demonstrated using comprehensive experimental probes. This material adopts a P 2 1 3 chiral cubic structure at room temperature. Based on the results of high‐resolution synchrotron X‐ray diffraction, this study shows that the low‐temperature (<130 K) crystal structure is a P 2 1 monoclinic phase, both polar and chiral. Magnetic and thermodynamic measurements reveal highly frustrated magnetic interactions and possible non‐collinear antiferromagnetic ordering at an extremely low temperature ≈0.6 K. Critically, anomalous magnetoelectric correlations are experimentally detected in its paramagnetic temperature regime, which can arise from the synergetic interplay between magnetoelastic and piezoelectric effects. These findings thus indicate that K 2 Co 2 (SO 4 ) 3 is a unique material, displaying multiple emergent structural and magnetic phenomena. This is attributed to both its overall crystallographic symmetry and the fact that its magnetic ions are located at low‐symmetry sites.

Xu, Xianghan↗