Search NASA⌕ Search

SEARCH · Search NASA

Results for “Maximum”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

Offshore-onshore record of Last Glacial Maximum–to–present grounding line retreat at Pine Island Glacier, Antarctica

Pine Island Glacier, West Antarctica, is the largest Antarctic contributor to global sea-level rise and is vulnerable to rapid retreat, yet our knowledge of its deglacial history since the Last Glacial Maximum is based largely on marine sediments that record a retreat history ending in the early Holocene. Using a suite of 10 Be exposure ages from onshore glacial deposits directly adjacent to Pine Island Glacier, we show that this major glacier thinned rapidly in the early to mid-Holocene. Our results indicate that Pine Island Glacier was at least 690 m thicker than present prior to ca. 8 ka. We infer that the rapid thinning detected at the site farthest downstream records the arrival and stabilization of the retreating grounding line at that site by 8–6 ka. By combining our exposure ages and the marine record, we extend knowledge of Pine Island Glacier retreat both spatially and temporally: to 50 km from the modern grounding line and to the mid-Holocene, providing a data set that is important for future numerical ice-sheet model validation.

58 GEOSCIENCES↗

Determination of the cascade-curve maximum depth from the muon component on the Yakutsk EAS array

The lateral distribution of muons with a threshold E{sub µ} secθ GeV in extensive air showers with E{sub 0} ≥ 10{sup 17} eV over the period of observations on the Yakutsk array from November 2011 to June 2013 has been investigated. It follows from this distribution that the cascade-curve maximum depth X{sub m} in the energy range (1–5) × 10{sup 17} eV increases relatively rapidly, because the cosmic-ray composition changes from iron nuclei dominating at E{sub 0} ≈ 10{sup 17} eV to protons.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Depth of the maximum of extensive air showers and mass composition of primary cosmic radiation at an energy of 4 x 10{sup 17} eV according to data on radioemission from extensive air showers

The results of a reanalysis of experimental data on extensive-air-shower radioemission that were obtained previously at the Moscow State University array for studying extensive air showers are presented. The lateral distribution of radioemission is given for showers characterized by a primary energy of 4 x 10{sup 17} eV and a zenith angle of {theta} = 35 deg. On the basis of an analysis of a lateral distribution of radioemission, the average value of the shower-maximum depth at a primary energy of 4 x 10{sup 17} eV is estimated at X{sub max} = 655 {+-} 13 g/cm{sup 2}. Estimates of themass content of primary radiation that were obtained from an analysis of the distribution of X{sub max} are compatible with the hypothesis that the role of light nuclei becomes more pronounced at energies above 10{sup 17} eV.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The Entropy Maximum in Scale-Invariant Processes with 1/f {sup α} Power Spectrum: the Effect of White Noise Anisotropy

Extreme fluctuations are simulated by a system of nonlinear stochastic equations describing the interacting phase transitions. Random 1/f {sup α} processes are formed under the action of anisotropic white noise with α-dependence of the power spectra on frequency and exponent α ranging from 0.7 to 1.7. It is shown that fluctuations with 1/f {sup α} power spectra in the studied range of α correspond to the entropy maximum, which indicates the stability of such processes at different values of exponent α.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Extending the predictive power of perturbative QCD using the principle of maximum conformality and the Bayesian analysis

In addition to the evaluation of high-order loop contributions, the precision and predictive power of perturbative QCD (pQCD) predictions depends on two important issues: (1) how to achieve a reliable, convergent fixed-order series, and (2) how to reliably estimate the contributions of unknown higher-order terms. The recursive use of renormalization group equation, together with the Principle of Maximum Conformality (PMC), eliminates the renormalization scheme-and-scale ambiguities of the conventional pQCD series. The result is a conformal, scale-invariant series of finite order which also satisfies all of the principles of the renormalization group. In this paper we propose a novel Bayesian-based approach to estimate the size of the unknown higher order contributions based on an optimized analysis of probability distributions. We show that by using the PMC conformal series, in combination with the Bayesian analysis, one can consistently achieve high degree of reliability estimates for the unknown high order terms. Thus the predictive power of pQCD can be greatly improved. We illustrate this procedure for two pQCD observables: R e+e– and R τ , which are each known up to four loops in pQCD. Numerical analyses confirm that by using the scale-independent and more convergent PMC conformal series, one can achieve reliable Bayesian probability estimates for the unknown higher-order contributions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Advances for QCD and the standard model: color-confining light-front holography and the principle of maximum conformality

Here, I review how the application of superconformal quantum mechanics and light-front holography leads to new insights into the physics of color confinement, the spectroscopy and dynamics of hadrons, as well as surprising supersymmetric relations between the masses of mesons, baryons, and tetraquarks. Spontaneous chiral symmetry breaking is automatically fulfilled by supersymmetric Light-Front QCD. The light-front holographic approach (HLFQCD) also predicts the behavior of the QCD running coupling and other observables from the nonperturbative color-confining domain to the perturbative domain. One can determine the QCD running coupling to high precision from the data of just a single experiment over the entire perturbative regime by using the Principle of Maximum Conformality (PMC). The PMC, which generalizes the conventional Gell-Mann-Low method for scale-setting in perturbative QED to non-Abelian QCD, provides a rigorous method for achieving unambiguous scheme-independent, fixed-order Standard Model predictions, consistent with the principles of the renormalization group. I also briefly review a novel feature of hadronic physics predicted by QCD: intrinsic heavy quarks.

Brodsky, Stanley J. [SLAC National Accelerator Lab↗

Ocean Cooling Pattern at the Last Glacial Maximum

Ocean temperature and ocean heat content change are analyzed based on four PMIP3 model results at the Last Glacial Maximum relative to the prehistorical run. Ocean cooling mostly occurs in the upper 1000 m depth and varies spatially in the tropical and temperate zones. The Atlantic Ocean experiences greater cooling than the rest of the ocean basins. Ocean cooling is closely related to the weakening of meridional overturning circulation and enhanced intrusion of Antarctic Bottom Water into the North Atlantic.

Zhuang, Kelin↗

Parallel Maximum Cardinality Matchings via Tree-Grafting

This software implements a new algorithm and its shared-memory parallelization for computing maximum cardinality matchings in bipartite graphs. The algorithm searches for augmenting paths via specialized breadth-first searches (BFS) from multiple source vertices, hence creating more parallelism than single source algorithms.

Buluc, Aydin↗

A 3D approximate maximum likelihood localization solver

A robust three-dimensional solver was needed to accurately and efficiently estimate the time sequence of locations of fish tagged with acoustic transmitters and vocalizing marine mammals to describe in sufficient detail the information needed to assess the function of dam-passage design alternatives and support Marine Renewable Energy. An approximate maximum likelihood solver was developed using measurements of time difference of arrival from all hydrophones in receiving arrays on which a transmission was detected. Field experiments demonstrated that the developed solver performed significantly better in tracking efficiency and accuracy than other solvers described in the literature.

Source record↗

Reply to “What Is the Maximum Entropy Principle? Comments on ‘Statistical Theory on the Functional Form of Cloud Particle Size Distributions’”

We welcome the opportunity to correct the misunderstandings and misinterpretations contained in Yano’s comment that led him to incorrectly state that Wu and McFarquhar misunderstood the maximum entropy (MaxEnt) principle. As correctly stated by Yano, the principle itself does not suffer from the problem of a lack of invariance. But, as restated in this reply and in Wu and McFarquhar, the commonly used Shannon–Gibbs entropy does suffer from a lack of invariance for coordinate transform when applied in continuous cases, and this problem is resolved by the use of the relative entropy. Further, it is restated that the Wu and McFarquhar derivation of the PSD form using MaxEnt is more general than the formulation by Yano and allows more constraints with any functional relations to be applied. The derivation of Yano is nothing new but the representation of PSDs in other variables.

54 ENVIRONMENTAL SCIENCES↗

Determining the Best Method for Estimating the Observed Level of Maximum Detrainment Based on Radar Reflectivity

Convective mass transport is the transport of mass from near the surface up to the upper troposphere and lower stratosphere (UTLS) by a deep convective updraft. This transport can alter the chemical makeup and water vapor balance of the UTLS, which affects cloud formation and the radiative properties of the atmosphere. It is therefore important to understand the exact altitudes at which mass is detrained from convection. The purpose of this study was to improve upon previously published methodologies for estimating the level of maximum detrainment (LMD) within convection using data from a single ground-based radar. Four methods were used to identify the LMD and validated against dual-Doppler derived vertical mass divergence fields for six cases with a variety of storm types. The best method for locating the LMD was determined to be the method that used a reflectivity texture technique to determine convective cores and a multi-layer echo identification to determine anvil locations. Although an improvement over previously published methods, the new methodology still produced unreliable results in certain regimes. The methodology worked best when applied to mature updrafts, as the anvil needs time to grow to a detectable size. Thus, radar reflectivity is found to be valuable in estimating the LMD, but storm maturity must also be considered for best results.

Carletta, Nicholas D.↗

Dataset for manuscript "Equipartition and the temperature of maximum density of TIP4P/2005 water"

We simulate TIP4P/2005 water in the temperature range of 257 K to 318 K with time-steps 0.25, 0.50, 1.00, 2.00, and 4.00 fs. The density-temperature behavior obtained using 0.25 or 0.50 fs are in excellent agreement with each other but differ from those obtained using time-steps that have been shown earlier to lead to a breakdown of equipartition. The temperature of maximum density (TMD) is 277.15 K with time-step 0.25 or 0.50 fs, but is shifted to progressively lower values for longer time-steps, a trend that holds for different thermostat/barostat combinations. Enhancing the water-water dispersion interaction, as has been recommended for simulating disordered proteins in TIP4P/2005, degrades the description of the liquid-vapor phase envelope. We present a simple physically transparent reasoning to highlight the separation of the time-scales between translational and rotational motion. We also develop a metric, Chi, that we term the equipartition anomaly, to detect equipartition violations in simulations that include molecules that are treated as rigid objects. Calculating Chi is shown to be straightforward and sensitive to equipartition violations. A key takeaway from this study is that using sufficiently short time-steps (less than or equal to 0.5 fs) to preserve equipartition is essential for obtaining meaningful liquid water properties and for producing reliable simulation data, as correct-ensemble sampling is fundamental to ensure reproducibility across codes and simulation alogrithms. The included dataset provides the raw data used in the preparation of the graphs noted in the manuscript.

36 MATERIALS SCIENCE↗

SUMO Maximum Assimilation

The Los Alamos Survival–Mortality experiment (SUMO) is located on Frijoles Mesa near Los Alamos, New Mexico, USA, at an elevation of 2150 m. This was a tree manipulation study that investigated the relative impacts of drought and warming on plant function and reveals how trees adapt to drought and heat in semi-arid regions. The study factored the role of tree hydraulic acclimation to both precipitation and temperature and separated their effects.The experiment is located in a pinon-juniper woodland near the ponderosa pine (Pinus ponderosa) forest ecotone. Maximum assimilation rate measured monthly for each target tree. See SUMO Target Tree Information data package (doi:10.15485/1440544) for additional information. Data released by Los Alamos National Lab for public use under LA-UR-18-23656.

54 ENVIRONMENTAL SCIENCES↗

PMC$_\infty$: Infinite-Order Scale-Setting method using the Principle of Maximum Conformality and preserving the Intrinsic Conformality

We show results for Thrust and C-parameter in e^+ e^- e + e − annihilation to 3 jets obtained using the recently developed new method for eliminating the scale ambiguity and the scheme dependence in pQCD namely the Infinite-Order Scale-Setting method using the Principle of Maximum Conformality (PMC _\infty ∞ ). This method preserves an important underlying property of gauge theories: intrinsic Conformality (iCF). It leads to a remarkably efficient method to eliminate the conventional renormalization scale ambiguity at any order in pQCD. A comparison with Conventional Scale Setting method (CSS) is also shown.

Di Giustino, Leonardo↗

Thermal properties for the thermal-hydraulics analyses of the BR2 maximum nominal heat flux.

This memo describes the assumptions and references used in determining the thermal properties for the various materials used in the BR2 HEU (93% enriched in {sup 235}U) to LEU (19.75% enriched in {sup 235}U) conversion feasibility analysis. More specifically, this memo focuses on the materials contained within the pressure vessel (PV), i.e., the materials that are most relevant to the study of impact of the change of fuel from HEU to LEU. This section is regrouping all of the thermal property tables. Section 2 provides a summary of the thermal properties in form of tables while the following sections present the justification of these values. Section 3 presents a brief background on the approach used to evaluate the thermal properties of the dispersion fuel meat and specific heat capacity. Sections 4 to 7 discuss the material properties for the following materials: (i) aluminum, (ii) dispersion fuel meat (UAlx-Al and U-7Mo-Al), (iii) beryllium, and (iv) stainless steel. Section 8 discusses the impact of irradiation on material properties. Section 9 summarizes the material properties for typical operating temperatures. Appendix A elaborates on how to calculate dispersed phase's volume fraction. Appendix B shows the evolution of the BR2 maximum heat flux with burnup.

36 MATERIALS SCIENCE↗

A New Maximum-Likelihood Change Estimator for Two-Pass SAR Coherent Change Detection.

In this paper, we derive a new optimal change metric to be used in synthetic aperture RADAR (SAR) coherent change detection (CCD). Previous CCD methods tend to produce false alarm states (showing change when there is none) in areas of the image that have a low clutter-to-noise power ratio (CNR). The new estimator does not suffer from this shortcoming. It is a surprisingly simple expression, easy to implement, and is optimal in the maximum-likelihood (ML) sense. The estimator produces very impressive results on the CCD collects that we have tested.

Wahl, Daniel E.↗

On Maximum FODO Acceptance

This note illustrates maximum acceptance of FODO quadrupole focusing channel. Acceptance is the largest Floquet ellipse of a matched beam: A = $\frac{a^2}{β}$$_{max}$ where a is the aperture of the channel and β max is the largest value of beta-function in the channel. If aperture of the channel is restricted by a circle of radius a, the s-s acceptance is available for particles oscillating at median plane, y=0. Particles outside median plane will occupy smaller phase space area. In x-y plane, cross section of the accepted beam has a shape of ellipse with truncated boundaries.

43 PARTICLE ACCELERATORS↗

Basement Fill Model Evaluation of Maximum Radionuclide Concentrations for Initial Suite of Radionuclides. Zion Station Restoration Project

ZionSolutions is in the process of decommissioning the Zion Nuclear Power Plant in order to establish a new water treatment plant. There is some residual radioactive particles from the plant which need to be brought down to levels so an individual who receives water from the new treatment plant does not receive a radioactive dose in excess of 25 mrem/y⁻¹ as specified in 10 CFR 20 Subpart E. The objectives of this report are: (a) To present a simplified conceptual model for release from the buildings with residual subsurface structures that can be used to provide an upper bound on radionuclide concentrations in the fill material and the water in the interstitial spaces of the fill. (b) Provide maximum water concentrations and the corresponding amount of mass sorbed to the solid fill material that could occur in each building for use by ZSRP in selecting ROCs for detailed dose assessment calculations.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗