SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Electron density measurements by partial reflection and rocket techniques during 20 May 1966 solar eclipse, showing agreement below 82 km height
Permalloy tapes uncertainty in magnetization process, discussing Barkhausen discontinuities measurement method
In-flight thrust measurement methods on SERT 2 ion thrustors, using accelerometer, electrical parameters and orbit change
Utilization of measuring methods and devices in general industrial applications
Plasmasphere total columnar electron content up to plasmapause, describing various measurement methods
Particle-metal matrix interface strength of dispersion strengthened Ni alloys, developing direct tensile stress measurement method
The research is pertinent to the realization of a self-sustained fissioning plasma for applications such as nuclear propulsion, closed cycle MHD power generation using a plasma core reactor, and heat engines such as the nuclear piston engine, as well as the direct conversion of fission energy into optical radiation (nuclear pumped lasers). Diagnostic measurement methods and experimental devices simulating plasma core reactor conditions are discussed. Studies on the following topics are considered: (1) ballistic piston compressor (U-235); (2) high pressure uranium plasma (natural uranium); (3) sliding spark discharge (natural uranium); (4) fission fragment interaction (He-3 and U-235); and (5) nuclear pumped lasers (He-3 and U-235).
A tracking system error analysis computer program is reported to study the feasibility of using range sum and range-rate sum measurements through a synchronous satellite to a user satellite, and range sum and range-rate sum measurements through a synchronous satellite to a ground based transponder for tracking of synchronous satellites. Error analysis transformed noise, bias, ground station location and orbit uncertainties into expected uncertainties in each of the orbits after tracking. Results show that both of the proposed measurement methods are feasible for determining and refining the orbits of future synchronous satellites.
An antenna gain measurement method was developed which utilizes a signal emitted from a radio star to determine absolute antenna gain at 136 MHz and 400 MHz for antennas in the STADAN network. An error analysis of the radio star method shows that the overall standard deviation uncertainty in antenna gain is + or - 0.6 db (1 sigma).
The problem of the calculation of ambient densities from San Marco-C neutral atmospheric composition experiment data is considered. A brief description is given of the data measurement method, followed by a description of both the theoretical and experimental data curves. Geometry, electrometer distortions, and noise effects are then studied in terms of their effects on the ideal data form. From these considerations two data reduction methods are evolved. The first is an iterative integration technique that exploits the symmetry of the experimental data about the minimum angle of attack. For the analysis of geometry effects, a second method using interval averaging was developed and studied.
A real time, computerized, measurement method for the effective perceived noise level is reported that uses comparison of two sounds differing in level and frequency to obtain the noise intensity emitted by aircraft and to calculate human psychoacoustic annoyance reactions.
A new noise measuring method is outlined that is based on electronic analysis of the radiated noise. Non-relevant components are suppressed, while the differential phonogram displayed on the oscilloscope screen discloses the information carrying components. It allows low skilled operators to perform: (1) correct alignment of equipment; (2) detection of incipient failure; and (3) checking of prototypes.
The Raman scattering technique was applied to measure the local static temperature and gas number density over a sharp-edge flat-plate model in a Mach 5 nozzle of the Langley nozzle test chamber with air as the test gas. The angle of attack varied from -5 to 15 deg, and the stagnation temperature varied from 317 to 442 K, with stagnation pressures ranging from 170 kN to 2.8 MN/sq m. The measured values of static temperature and density ranged from 60 to 100 K and from 0.03 to 0.8 kg/cu m, respectively. A comparison with calculated values based on static pressure measurements along the model shows that the Raman scattering technique is a viable measurement method in applications to high-speed three-dimensional flows.
The extravehicular activity life support equipment, suit temperature control, metabolic rate measurement methods, and energy production are discussed. The Apollo crewmen were able to perform planned extravehicular activities and to extend them to the maximum time allowable without medical problems. The metabolic rates experienced during the lunar surface extravehicular activities were lower than conservative premission estimates. A manually controlled liquid cooling garment was effectively used to minimize fatigue and water loss from sweating during lunar surface extravehicular activities. Gas cooling was adequate during the short zero-g extravehicular activities performed from the command module. The prediction of EVA workloads became more reliable as inflight data was accumulated. The prediction of the average metabolic cost of an EVA was more reliable than the cost of an individual short-term task.
Fundamental concepts on which to base a detailed design for a Shuttle Modular Scanning Spectroradiometer were developed, and a preliminary design is presented. The recommended design features modularity and flexibility. It includes a 75-cm f/1.7-telescope assembly in an all-reflective Schmidt configuration, a solid state scan system (pushbroom) with high resolution over a 15 deg field of view, and ten detector channels covering the spectral range from 0.45 to 12.5 micrometers. It uses charge transfer device techniques to accommodate a large number of detector elements for earth observation measurements. Methods for in-flight radiometric calibration, for image motion compensation, and for data processing are described. Recommendations for ground support equipment are included, and interfaces with the shuttle orbiter vehicle are illustrated.
Topics treated include the application of a Fourier transform spectrometer to infrared remote sensing, the performance optimization of a satellite-borne thematic mapper, a data handling system to be integrated with a digital airborne multispectral scanner, infrared thermography for micro- and mesometeorological measurements, satellite interrogated data collection platforms for river and flood forecasting and the automatic measurement of sea surface temperature from a GOES satellite. Solar and atmospheric effects on satellite imagery derived from aircraft reflectance measurements, methods for determining haze levels from multispectral scanner data, restoration of Landsat images by discrete two-dimensional deconvolution and the automatic classification of aircraft and satellite multispectral images using mixed integer programming are also discussed. Individual items are announced in this issue.
A description is given of a program concerned with the development and the evaluation of techniques for the measurement of water depth with a pulsed laser. Airborne laser bathymetry makes use of a light pulse which is sent downward. Information concerning the water depth is provided by the time interval observed between the arrival of the light pulse reflected from the water surface and the arrival of the pulse coming from the ocean floor. Details concerning the instrumentation used for the developed measurement method are discussed. Attention is also given to field experiments and aspects of system performance.
A research program to investigate the aerodynamics of reciprocating aircraft engine cooling installations is discussed. Current results from a flight test program are presented concerning installation flow measurement methods. The influence of different inlet designs on installation cooling effectiveness and efficiency are described.