Search NASA⌕ Search

SEARCH · Search NASA

Results for “Methods in superconductivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39
All sourcesNASA NTRSDOE OSTI
DOE OSTI2017

Pulse-noise approach for classical spin systems

For systems of classical spins interacting with the bath via damping and thermal noise, a technique is suggested to replace the white noise by a pulse noise acting at regular time intervals Δ t , within which the system evolves conservatively. The method is working well in the typical case of a small dimensionless damping constant λ and allows a considerable speedup of computations by using high-order numerical integrators with a large time step δ t (up to a fraction of the precession period), while keeping δ t ≪ Δ t to reduce the relative contribution of noise-related operations. In cases when precession can be discarded, δ t can be increased up to a fraction of the relaxation time ∝ 1 / λ that leads to a further speedup. This makes equilibration speed comparable with that of the Metropolis Monte Carlo method. The pulse-noise approach is tested on single-spin and multispin models.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2018

Density Functional Theory Study on Electronic Structures and Magnetism for Nitrogen-Doped ZnS

Using the full-potential linearized augmented plane wave method, together with the generalized gradient approximation and modified Becke-Johnson as correlation potential, the electronic structures and magnetism for nitrogen-doped ZnS are investigated. Based on the generalized gradient approximation, calculations show nitrogen-substituting sulfur (N{sub S}) would induce the ZnS to be paramagnetic metal. As the band gap increasing to the experimental results (obtained by the modified Becke-Johnson potential), the N{sub S} defects would induce the ZnS to be a ferromagnetic metal. The total magnetic moment for ZnS supercell with single N{sub S} defect is 0.85 μ{sub B}. Positive chemical pair interactions imply that N{sub S} defects would form homogeneous distribution in ZnS host. Sulfur vacancies would give rise to the ZnS with N{sub S} defects system losing the magnetism. Moderate formation energy (0.71 eV) indicates ZnS with N{sub S} defects could be fabricated experimentally.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2018

Effects of La Doping and Zn or O Vacancy on the Magnetic Property of ZnO

Research on the magnetic origin and mechanism of La-doped ZnO system has been controversial. To solve this problem, we studied the effects of La doping and Zn or O vacancy on the magnetic property of ZnO using geometry optimization and energy calculation on the basis of first-principle generalized gradient approximation method of density functional theory. The electronic structures and magnetic properties of undoped ZnO, La-doped ZnO system, and systems with coexisting La doping and Zn or O vacancies were calculated. Results showed that the systems of La-doped ZnO and the coexistence of La doping and O vacancy are nonmagnetic. In addition, the system of La replacing Zn and one Zn vacancy exhibits long-range orderly ferromagnetism, and the Curie temperature of the doping system can achieve room temperature. The magnetism source of the systems with La doping and Zn vacancy coexisting in ZnO demonstrates strong hybrid coupling electron exchange effects existing among Zn-4s, Zn-3p, O-2p, and La-5s orbits that are nearest to the Zn vacancy. The next nearest distance between doping and Zn vacancy leads to the lowest formation energy and highest stability under the same doping condition.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2018

The Use of Raman Spectroscopy and Methods of Quantum Chemistry for Assessing the Relative Concentration of Triglycerides of Oleic and Linoleic Acids in a Mixture of Olive Oil and Sunflower Seed Oil

The Raman spectra of five samples of sunflower seed oil and five samples of cold-pressed olive oil of various brands are recorded in the range of 500–2000 cm{sup –1}. Within the framework of the B3LYP/6-31G(d)/6-31G(d,p)/6-31+G(d,p)/6-311G(d)/6-311G(d, p)/6-311+G(d,p) methods, the structural models of eight fatty acids (oleic, linoleic, palmitic, stearic, α-linolenic, arachidonic, eicosapentaenoic, and docosahexaenoic) are constructed, and also within the framework of the B3LYP/6-31G(d) method, the structural models of triglycerides of the first four of the above acids are obtained. The vibrational wavenumbers and intensities in the IR and Raman spectra are calculated. The Raman spectra of olive oil and sunflower seed oil were simulated by using the supermolecular approach. We investigated the dependence of the relative intensity of the vibrational bands ν{sub exp} = 1660 and 1445 cm{sup –1} on the concentration of triglycerides in oils of oleic and linoleic acids and the dependence of the intensity of these bands on the degree of saturation of fatty acids. Experimental and empirical dependences are constructed to estimate the relative concentration of triglycerides of oleic and linoleic acids in a mixture of olive oil and sunflower seed oil. The applicability of the density functional theory together with the vibrational spectroscopy for the identification of mixtures of vegetable oils is discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1992

Magnetic penetration depth of YBa2Cu3O(7-delta) thin films determined by the power transmission method

A power transmission measurement technique was used to determine the magnetic penetration depth (lambda) of YBa2Cu3O(7-delta) superconducting thin films on LaAlO3 within the 26.5 to 40.0 GHz frequency range, and at temperatures from 20 to 300 K. Values of lambda ranging from 1100 to 2500 A were obtained at low temperatures. The anisotropy of lambda was determined from measurements of c-axis and a-axis oriented films. An estimate of the intrinsic value of lambda of 90 +/- 30 nm was obtained from the dependence of lambda on film thickness. The advantage of this technique is that it allows lambda to be determined nondestructively.

Heinen, Vernon O.↗
DOE OSTI2019

Solution Combustion Synthesis of Fe{sub 3}O{sub 4} Powders Using Mixture of CTAB and Citric Acid Fuels

Magnetite (Fe{sub 3}O{sub 4}) powders were synthesized by solution combustion method using a mixture of cetyltrimethylammonium bromide (CTAB) and citric acid fuels at various fuel to oxidant ratios (ϕ = 0.5, 1, 1.5, and 2). Phase evolution investigated by x-ray diffraction method showed single-phase Fe{sub 3}O{sub 4} powders were only formed at ϕ = 1 using mixture of fuels, while impurity α-Fe{sub 2}O{sub 3} phase together with magnetite phase was completely disappeared at ϕ = 2 for CTAB fuel alone. The specific surface area and porous structures of the as-combusted Fe{sub 3}O{sub 4} powders were characterized by N{sub 2} adsorption-desorption isotherms and scanning electron microscopy techniques, respectively. The specific surface area using the mixture of fuels (37 m{sup 2}/g) was higher than that of CTAB fuel alone (32 m{sup 2}/g). Magnetic properties of the as-combusted powders were studied by vibration sample magnetometry method. The highest saturation magnetization of 83 emu/g was achieved by mixture of fuels at ϕ = 1, due to the high purity and large particle size.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2019

Half-Metallic Ferromagnetism in V-Doped FmP Binary Monopnictide Compounds: an Ab Initio Calculations

The ab initio calculations of the structural phase stability, magnetic phase stability, and electronic and magnetic properties of the FmP binary monopnictides and the half-metallic ferromagnetic properties of their Fm{sub 1−x}V{sub x}P (for x = 0.25, 0.50, 0.75, and 1)-doped alloys have been assured through the spin-polarized density functional theory (DFT), and they are performed by employing the full-potential linearized augmented plane waves plus local orbitals (FP-L/APW + lo) method that is implemented in the WIEN2k package. The exchange and correlation potential is parameterized by the generated gradient approximation (GGA) of Perdew-Burke-Ernzerhof (PBE) scheme. According to the studies of the magnetic phase stability, the fermium monopnictides (FmP) have a paramagnetic regime, while the ferromagnetic behavior appears when we dope this compound with vanadium. Through the ferromagnetic character of all Fm{sub 1−x}V{sub x}P alloys, the spin-polarized band structures and densities of states exhibit a nearly half-metallic character of Fm{sub 0.75}V{sub 0.25}P alloy, whereas Fm{sub 0.50}V{sub 0.50}P, Fm{sub 0.25}V{sub 0.75}P, and VP compounds showed metallic character. Moreover, the total magnetic moment of the three ternary alloys is mainly contributed by Fm and V elements, where the p-d hybridization reduces the atomic magnetic moment of V element from its free space charge and produces feeble magnetic moments on the nonmagnetic P sites.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2018

The Effects of Ru and Rh Substitutions on the Magneto-electronic and Optical Properties of the TbNi{sub 5} Intermetallic Compound: An Ab Initio Investigation

In this study, we have performed the first-principles investigation of the structural, electronic, magnetic, and optical properties of TbNi{sub 5}, TbNi{sub 3}Ru{sub 2}, and TbNi{sub 3}Rh{sub 2} compounds. The full-potential linearized augmented plane waves with local orbitals method is used in the framework of density functional theory (DFT) employing the generalized gradient approximation (GGA) for the exchange correlation functional as implemented in WIEN2k package. The structural properties are reposed on the evaluation of the equilibrium lattice parameters of these compounds under hexagonal structure such as lattice constants (a and c), bulk modulus (B), and its first pressure derivative (B{sup ′}). The spin-polarized electronic structures, including band structure and density of states, are calculated employing the GGA plus band correlated Hubbard parameter (GGA + U) scheme. The results show that density of states and magnetic moment of the pure TbNi{sub 5} compound are changed by doping. These changes are observed in the appearance of additional peaks on the spectral density of states (DOS) and in the augmentation of the total magnetic moment of TbNi{sub 3}X{sub 2} (X = Ru and Rh) intermetallic compounds. Based on the electronic structure results, the frequency dependents of optical conductivity are estimated in all the spectra and interpreted in the interband optical absorption part.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2019

Effects of Ag Doping and Point Defect on the Magnetism of ZnO

The magnetism sources and magnetic mechanism of Ag doping and point defect, which coexist in the presence of ZnO, are frequently controversial. To solve these problems, the effects of Ag doping and Zn or O vacancy on the magnetism of ZnO were investigated using geometry optimization and energy calculation according to the first-principles generalized gradient approximation + U (GGA+U) method of density functional theory. Results revealed that the system which Ag doping and Zn vacancy coexists in ZnO could achieve room-temperature ferromagnetism. This system had an extremely high spin polarization, which was advantageous for the spin electron injection sources applied in dilute magnetic semiconductors. Result also revealed that the magnetism of Zn{sub 14}AgO{sub 16} was caused by the electron hybrid coupling effects among the O-2p, Ag-4d, Ag-5s, and Zn-4s orbits. And these effects were produced by the hole carriers after complexes were formed by the Ag doping and Zn vacancy. With regard to the most stable structure of the ground state, all doping systems which Ag replacing Zn and O vacancy coexisted in ZnO and those which Ag replacing Zn, interstitial Ag, and O vacancy coexisted in ZnO were all non-magnetic. Thus, these doping systems were unsuitable for dilute magnetic semiconductors. By contrast, the doping systems of interstitial Ag and Zn vacancy were magnetic, although the magnetism was relatively weak, thus rendering such systems inapplicable as well.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Two-particle correlation functions in cluster perturbation theory: Hubbard spin susceptibilities

Cluster perturbation theory (CPT) is a computationally economic method commonly used to estimate the momentum- and energy-resolved single-particle Green's function. It has been used extensively in direct comparisons with experiments that effectively measure the single-particle Green's function, e.g., angle-resolved photoemission spectroscopy. However, many experimental observables are given by two-particle correlation functions. CPT can be extended to compute two-particle correlation functions by approximately solving the Bethe-Salpeter equation. We implement this method and focus on the transverse spin susceptibility, measurable via inelastic neutron scattering or with optical probes of atomic gases in optical lattices. Finally, we benchmark the method with the one-dimensional Fermi-Hubbard model by comparing with known results.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

An Efficient Numerical Algorithm for Solving Coupled Time-Dependent Ginzburg-Landau Equation for Superconductivity and Elasticity

A decoupled finite element algorithm is developed for simulating the vortex dynamics on an elastic superconductor which couples the time-dependent Ginzburg- Landau equation with the complex-valued superconducting order parameter and the vector-valued magnetic potential, and the elasticity equation. We present an iterative algorithm for the decoupled system arising from the time and spatial discretization using a combination of preconditioner, algebraic multigrid method (AMG) and preconditioned conjugate gradient method (PCG). The iterative algorithm allows us to perform large-scale three-dimensional simulations of mesoscale pattern formation during superconducting phase transitions with arbitrary elastic boundary conditions. Here, the performance and efficiency of the algorithm are numerically verified by several benchmark problems, exhibiting up to two orders of magnitude improvement depending on the scale of discrete system compared to the exact solver.

Efficiency↗
DOE OSTI2019

HTS Transformer Windings Design Using Distributive Ratios for Minimization of Short Circuit Forces

High-temperature superconducting (HTS) transformers have a promising feature in reduction of total weight, total size, and the losses of large-scale distribution transformers. However, the lower leakage reactance of HTS transformers results in a higher short-circuit fault currents and electromagnetic forces. Therefore, optimization of short-circuit electromagnetic forces is one of the crucial aspects in the design of HTS transformers. In this paper, a novel analytical method is proposed for determination of optimum distributive ratios resulting in minimization of these forces for asymmetrical multi-segment windings of an HTS transformer. Employing these distributive ratios, radial and axial components of short-circuit electromagnetic forces in an HTS transformer are significantly reduced. Two- and three-dimensional (2D and 3D) finite element method (FEM) simulations are employed to verify the analytical method results.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2018

First-Principles Study in New Hf{sub 2}CoZ (Z = B, C, Al, Si, Ga, Ge, In, Sn, Tl, and Pb) Heusler Alloys

The full-potential linearized augmented plane wave method within density functional theory was used to investigate the electronic structures, magnetic properties, and half-metallicity in Hf{sub 2}CoZ (Z = B,C, Al, Si, Ga, Ge, In, Sn, Tl, and Pb) alloys with AlCu{sub 2}Mn- and CuHg{sub 2}Ti-type structures. The AlCu{sub 2}Mn-type structure is energetically favorable than the CuHg{sub 2}Ti-type structure for all compounds. Hf{sub 2}CoGa, Hf{sub 2}CoAl, Hf{sub 2}CoIn, Hf{sub 2}CoTl, and Hf{sub 2}CoSn compounds in the CuHg{sub 2}Ti-type structure were half-metallic ferromagnets. The d-d and covalent hybridizations between transition metals Hf and Co were effective in the formation of minority band gap. The total magnetic moments of half-metallic Hf{sub 2}CoZ (Z = Al, Ga, In, Sn, and Tl) compounds in the CuHg{sub 2}Ti-type structure obeyed the Slater–Pauling rule (M{sub tot} = Z{sub tot} − 18). Hf{sub 2}CoIn and Hf{sub 2}CoTl compounds were half-metals in relatively wide ranges of lattice constants which indicates that they can be promising and interesting candidates for spintronic devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Quantum Information for Fusion Energy Sciences (Final Technical Report)

The simulation of plasma dynamics is a critical area of Fusion Energy Sciences (FES) due to it’s usefulness in predicting, controlling, and confining plasmas in the context of potential fusion reactors. The simulation of plasmas is a computationally difficult problem in both classical and quantum physics, motivating investigation into the potential of quantum computers to simulate these systems. This project took several concrete steps towards this goal by developing tools for improving the control, characterization, and calibration of quantum gates on a superconducting quantum computer, developing error suppression and mitigation tools to reduce errors on the quantum computer, and utilizing these advancements to simulate reduced models of plasma dynamics on the quantum computer. In order to efficiently simulate plasma physics, an optimal control method which synthesizes, directly at the pulse level, any quantum gate on qubit and qutrit systems was developed. Using four superconducting transmon quantum processors at Rigetti and LLNL, it was demonstrated that any arbitrary quantum gate on qubits and qutrits could be implemented with high fidelity, leading to a significantly reduced length of a gate sequence. A problem of interest in FES is the nonlinear optical process of laser pulse compression within a plasma. Since quantum physics is linear, simulating nonlinear operations is not naturally feasible on a quantum computer, however it is possible to simulated a quantized version of the nonlinear process. A quantization approach to convert nonlinear wave-wave interaction problems to Hamiltonian simulation problems was developed and demonstrated using two qubits on a Rigetti device. In this experiment, a number of error suppression and mitigation techniques were investigated to determine how best to utilize the finite quantum resources. This study provides an example of how plasma problems may be solved on near-term, noisy quantum computing platforms and identified a promising set of techniques. Building on the insights of these experiments, the investigation turned to linear electron-plasma wave physics. A connection was identified between a local one-dimensional lattice spin model and linear wave phenomena, allowing a plasma physics problem to be efficiently mapped to the quantum computer. In this framework, reflection and transmission of plasma waves at a sharp boundary was studied, as well as the propagation of waves through an inhomogeneous plasma medium. In addition to the suite of error suppression and mitigation techniques developed, this experiment introduced the use of a digital-analog gate scheme designed to efficiently simulate the plasma Hamiltonian. With hardware available at the conclusion of the project, simulation at the scale of 9 qubits and 15 timesteps (60 entangling layers) was achieved.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2018

Effect of Pressure on the Electronic, Magnetic, and Optical Properties of the In{sub 0.75}Cr{sub 0.25}P Compound

Using the density functional theory (DFT) approach and full-potential linearized augmented plane waves (FP-LAPW) method, some of the electronic (density of states, band structure, and Fermi surfaces), magnetic (total and local magnetic moments, spin polarization, exchange constants), and optical properties (dielectric function, energy loss function, and refractive index) were investigated. The GGA + U approximation was used for the exchange-correlation term. The effect of hydrostatic pressure up to 20 GP has been studied on these properties. The results show that the In{sub 0.75}Cr{sub 0.25}P compound is a half metal with 100% spin polarization at the Fermi level and the increment of pressure does not change its half-metallic behavior. The half-metal gap achieved for this compound is variable between 1.38 and 1.5 eV. The interaction between Cr and P atoms in this compound is an anti-ferromagnetic type. It was observed that the total magnetic moment for this compound is about 3 μ{sub B}. Local magnetic moments change with increasing pressure, but the total magnetic moment remains unaffected by increasing the pressure. Calculations of the optical properties of the In{sub 0.75}Cr{sub 0.25}P compound showed that the dominant mechanism for the low-energy photons is due to the induced free carriers of the Cr atom, and the optical properties of this compound, in particular the refractive index in the visible region, change with increasing pressure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Correlated nanoelectronics and the second quantum revolution

The growing field of correlated nanoelectronics exists at the intersection of two established fields: correlated oxide electronics and semiconductor nanoelectronics. The development of quantum technologies that exploit quantum coherence and entanglement for the purposes of computation, simulation, and sensing will require complex material properties to be controlled at nanoscale dimensions. Heterostructures and nanostructures formed at the interface between LaAlO 3 and SrTiO 3 exhibit striking behavior that arises from the ability to program the conductive behavior at extreme nanoscale dimensions. The active electronic layer, SrTiO 3 , exhibits a wide range of gate-tunable phenomena such as ferroelectricity, ferroelasticity, magnetism, superconductivity, and spin–orbit coupling, all of which can be controlled at the nanoscale using two reversible methods: conductive atomic force microscope lithography and ultra-low-voltage electron beam lithography. Mesoscopic devices such as single-electron transistors and quasi-one-dimensional electron waveguides can be “sketched” using these techniques, and the properties of these devices differ significantly from those created from traditional semiconductors, such as Si or GaAs. The strongly correlated nature of the SrTiO 3 system is evident from superconducting behavior as well as a state in which electrons are paired outside the superconducting state. A highly exotic phase was discovered in which a degenerate quantum liquid is formed from bound states of n = 2, 3, 4, … electrons. Further development of correlated nanoelectronics based on the LaAlO 3 /SrTiO 3 system can potentially lead to a general platform for quantum simulation as well as a pathway for the development of highly entangled states of multiple photons.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Relativistic Modeling of Ultra-Short Electron Pulse Propagation

The ultrafast electron microscopy, electron diffraction, electron crystallography, and nanocrystallography methods opened the possibility of studying the coherent structural dynamics of matter. The time resolution of the ultrafast electron microscopy and electron diffraction methods determined by the duration of electron pulses is the key parameter of experimental setups. This paper treats electron pulse dynamics in the field free drift region specifically for applications in atomic imaging. The electron beam is modeled as a system of particles (N) with N = 1000 and N = 10 000 electrons. The beam propagates for a certain period of time (1–4 ns); during its propagation, electron distribution parameters (over coordinates and velocities) are calculated to characterize the temporal profile and uncertainty in the electron wavelength at the sample. The results of applying relativistic dynamic equations show that nonrelativistic results are satisfactorily applicable (with 15 per cent or better accuracy) for modeling short electron pulse elongation and broadening at 30 keV and lower energies. However, the results of such modeling may be significantly in error for intermediate energies (300 keV), and for the fast relativistic beams (3 MeV) they become completely wrong. The relative reduction in Coulomb repulsion effects at higher energies is known, however; we give a comprehensive treatment that allows a quantitative picture. Using high-energy electron pulses results in almost complete elimination of the repulsive Coulomb effect. Dispersion of electron velocities becomes much lower at higher energies. For 3 MeV electrons, electron pulse duration as well as its radius does not noticeably change even after traveling for 4 ns (1.2 m). Even at 300 keV, the pulse duration increase is negligible until 1 ns (0.2 m). A simple mean-field model suggested in [13] has been extended to arbitrarily fast relativistic electron pulses with good correspondence to direct dynamic modeling.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Development of High-efficiency and Cost-effective Forged Ingot Niobium Technology for Science Frontiers and Accelerator Applications

Development of Forged Ingot Niobium Technology: Worlds science frontier programs and SRF accelerator applications demand high performance and cost-effective SRF accelerator technology [1-8]. Fine-grain (FG) and Large-grain (LG) ingot niobium technologies have been very well developed and implemented in all the present-day accelerator projects. However, forged ingot niobium technology which is the focus of this development proposal will be much more cost-effective and expected to have several technical advantages. FG niobium sheet production is very complex involving more than ten processing steps making them prone to contamination. As a result, they are very expensive to produce and require stringent QA procedure to be ready for SRF cavity production. The accelerating cavity process steps are also numerous and require strict procedures in order to achieve high accelerating gradients and quality factors needed for science frontier programs. LG niobium disc production, directly sliced from the ingot, is relatively simple and straight forward to keep surface cleanness. The disc production cost is significantly low compared to FG niobium sheet production. However, there are (some) draw backs due to non-homogeneity of the grain boundary distribution, resulting in non-uniform mechanical properties and complex cavity fabrication, although the LG cavities achieve the expected high-gradient performance goals with lower cost. Medium-grain (MG) niobium disk production may be realized with a new approach/process, the disc directly sliced from the forged ingot, involves a simpler process steps contributing major production cost reduction [9]. These discs are expected to be superior as they tend to be homogenous with uniform sub millimeter grains and mechanical properties. We are eagerly looking forward to developing the forged ingot niobium SRF accelerator technology for the benefit of the world-wide science frontier programs, green energy subcritical nuclear energy systems and a wide variety of industrial applications including the production of radio isotopes and nuclear transmutation applications. Measurement of thermal characteristics of the forged ingot niobium: Measurement of the thermal diffusivity, D, of superconducting MG niobium is important to be understood in comparison with FG sheet and LG disc, as well as that of advanced composite material of Nb3Sn film sputtered on forged ingot Nb, which will be determined using transient pump-probe thermo-modulation [10,11]. Transient thermo-modulation is based on using an ultrafast laser pulse to heat the superconducting materials by a few K, then a synchronized laser pulse probes the reflectance of the heated material. For thin films on a substrate (e.g, 100-nm Nb3Sn on Nb), it takes <100 ps for the heat to reach the substrate by diffusion. Therefore, an ultrafast method is needed to probe D of the studied material. D will be measured from room temperature to liquid helium temperatures. Fundamental Research: The increase of rf loss in SRF cavities is related to trapping of residual magnetic field during the cavity cool-down. The study suggested that the micro structure plays the role in flux trapping sensitivity. The research includes the flux trapping and expulsion study as forged ingot niobium goes through several mechanical deformations, crystallization leading to the optimal SRF cavity performance. Furthermore, the cavity made from FG, MG, and LG sheet/disc will be compared to understand the optimal re-crystallization temperature that cavity needed to be heat treated which minimize the flux trapping and increase SRF cavity performance. References: 1. S. Belomestnykh, Overview of recent SRF developments for ERLs, presented at the SRF 2015, Whistler, BC, Canada (2015). 2. A. Yamamoto, M. Yamanaka and G. Myneni, Ingot Nb based SRF Technology for the International Linear Collider, in Science and Technology of Ingot Niobium for Superconducting Radio Frequency Applications, AIP Conf. Proc. 1687, 030005-1 ? 03005-6, 2015 3. Report of the Workshop on Energy and Environmental Applications of Accelerators, DOE Workshop Report. https://science.osti.gov/-/media/hep/pdf/Reports/2020/CASM_WorkshopReport.pdf? la=en&hash=AEB0B318ED0436B1C5FF4EE0FDD6DEB84C2F15B2 4. G. Ciovati, et al., Design of a cw, low-energy, high-power superconducting linac for environmental applications, Phys. Rev. Accel. Beams 21, 091601 (2018). 5. P. Dhakal, et al., Effect of high temperature heat treatments on the quality factor of a large-grain superconducting radio-frequency niobium cavity, Phys. Rev. ST Accel. Beams 16, 042001 (2013). 6. P. Kneisel et al., Review of ingot niobium as a material for superconducting radio frequency accelerating cavities, Nuclear Instruments and Methods in Physics Research A 774, 133 (2015). 7. G. Ciovati, P. Dhakal, and G. R, Myneni, Superconducting radio-frequency cavities made from medium and low-purity niobium ingots, Supercond. Sci. Technol. 29, 064002 (2016). 8. M. Drury et al., commissioning of the prototype C75 cavities in a CEBAF cryomodule, in Proc. of IPAC 2018, Vancouver, BC, Canada (2018) 9. Feasibility of forged-ingot niobium disc and SRF cavity fabrication technology recently demonstrated in cooperation of ATI, BSCE, and KEK (2020). 10. Hani E. Elsayed-Ali, ?Measurements of heat transport in thin films by ultrafast laser-based techniques,? 3rd International Conference on Thermal Issues in Emerging Technologies Theory and Applications, Cairo, Egypt, pp. 347 ? 350 (2010). DOI: 10.1109/ThETA17616.2010 11. W. M. G. Ibrahim, H. E. Elsayed-Ali, M. Schinn, and C. A. Bonner, Jr., ?Ultrafast investigation of electron dynamics in multilayer metals,? Int. J. Heat and Mass Transfer, 47(10?11), 2261?2268 (2004).

Myneni, G.↗