SEARCH · Search NASA

Results for “Modal Analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

All sources NASA NTRS DOE OSTI

NASA NTRS2022

Accelerance Decoupling: An Approach for Removing the Influence of the Test Stand from the Integrated Modal Test

The main objective for launch vehicle (LV) modal testing is to quantify the LV’s modal properties in the free-free state (post pad separation). However, given the size of most LV systems, free-free testing is a challenge and often not feasible. With this, a test stand, typically the launch pad itself, is introduced as the means of support. This shifts the challenge to developing robust numerical methods for removing the influence of the launch pad from the integrated system modal test. The Space Launch System (SLS) is no exception where the mobile launcher (ML) is used to support the vehicle for the integrated modal test (IMT). For the IMT, it is well understood from pre-test analysis with finite element models (FEMs) of the SLS and SLS coupled to ML that the ML has a significant influence on the SLS modal properties especially in the lower frequency range where the primary SLS bending modes exist. An accelerance decoupling (AD) method has been formulated for the purpose of “subtracting out” the influence of the ML from the IMT results. With AD, the SLS decoupled frequency response functions (FRFs) are directly extracted from the IMT FRFs. The subject approach is aimed to utilize measured data only and achieve a robust FRF decoupling scheme. AD is derived from a widely used coupling technique called “Receptance Coupling” (RC). The AD core equation reverses the RC process and utilizes a pair of auxiliary equations that enable the core equation to be resolved based on measured data only. In AD, the decoupled component FRFs are extracted from the coupled system FRFs with a transformation to remove the contribution of the “subtractive component”. This paper addresses the AD’s operational flexibility to resolve SLS free-free modal properties from coupled system measured data but also the possibility to include data from FEM if there is enough confidence in the FEM or if it is asserted that the effect to the final outcome is reasonable.

Accelerance decoupling↗

NASA NTRS1980

Rotordynamics analysis of the Space Shuttle main engine high-pressure oxidizer pump

This study describes the rotordynamics analysis of the Space Shuttle Main Engine (SSME) high-pressure oxidizer turbopump. Modal synthesis methods were used to account for the complex coupling of the pump and engine structure. Cross-coupling elements effecting rotor stability were included in the analysis. Results of the analysis indicated that smaller bearing clearances and a smooth turbine interstage seal would result in longer bearing life and improved stability. Subsequent testing with these design features has shown the same results.

Rowan, B. F.↗

NASA NTRS1978

Instrumental variables algorithm for modal parameter identification in flutter testing

The paper is concerned with the task of estimating modal parameters from system response measurement in aircraft flutter testing. A frequency-domain derivation of an instrumental-variables algorithm is presented for a linear time-invariant dynamic system of order n. Basically, this algorithm fits a set of poles and zeros to the measured transfer function. An illustrative example is provided regarding the application of the algorithm to aeroelasticity testing. It is shown that the algorithm can be implemented for on-line data reduction with a microcomputer-based analysis system. By using instrumental variables the sensitivity of the modal parameter estimates to noise in the system-response measurements is reduced greatly. The algorithm is expected to be a powerful and valuable tool for on-line estimation of modal parameters in flutter testing and should be useful in control system and structural dynamics tests.

Johnson, W.↗

NASA NTRS1993

Simulating flight boundary conditions for orbiter payload modal survey

An approach to simulate the characteristics of the payload/orbiter interfaces for the payload modal survey was developed. The flexure designed for this approach is required to provide adequate stiffness separation in the free and constrained interface degrees of freedom to closely resemble the flight boundary condition. Payloads will behave linearly and demonstrate similar modal effective mass distribution and load path as the flight if the flexure fixture is used for the payload modal survey. The potential non-linearities caused by the trunnion slippage during the conventional fixed base modal survey may be eliminated. Consequently, the effort to correlate the test and analysis models can be significantly reduced. An example is given to illustrate the selection and the sensitivity of the flexure stiffness. The advantages of using flexure fixtures for the modal survey and for the analytical model verification are also demonstrated.

Chung, Y. T.↗

NASA NTRS1997

Autonomous Modal Identification of the Space Shuttle Tail Rudder

Autonomous modal identification automates the calculation of natural vibration frequencies, damping, and mode shapes of a structure from experimental data. This technology complements damage detection techniques that use continuous or periodic monitoring of vibration characteristics. The approach shown in the paper incorporates the Eigensystem Realization Algorithm (ERA) as a data analysis engine and an autonomous supervisor to condense multiple estimates of modal parameters using ERA's Consistent-Mode Indicator and correlation of mode shapes. The procedure was applied to free-decay responses of a Space Shuttle tail rudder and successfully identified the seven modes of the structure below 250 Hz. The final modal parameters are a condensed set of results for 87 individual ERA cases requiring approximately five minutes of CPU time on a DEC Alpha computer.

Pappa, Richard S.↗

NASA NTRS1973

Performance of statistical energy analysis

Statistical energy analysis (SEA) methods have been developed for high frequency modal analyses on random vibration environments. These SEA methods are evaluated by comparing analytical predictions to test results. Simple test methods are developed for establishing SEA parameter values. Techniques are presented, based on the comparison of the predictions with test values, for estimating SEA accuracy as a function of frequency for a general structure.

Davis, R. F.↗

NASA NTRS1977

On scaling techniques

An introductory review of the principles of scaling with emphasis on ride quality work is presented. It will be divided into six parts as follows: (1) definition of scaling, (2) scope and goals of scaling, (3) scaling techniques (with emphasis on rating scale, magnitude estimation procedures and cross-modality matching), (4) laboratory vs. field studies, (5) multivariate analysis; and (6) selected references.

Source record↗

NASA NTRS1978

Glasses in the Luna 24 core and petrogenesis of ferrobasalts

Modal abundance and major- and minor-element chemical analysis of homogeneous, non-agglutinitic mare and non-mare glasses from the Luna 24 drill core show that most glasses can be related to known rock types. Mare glasses include: brown glass identical in composition to the fine-grained low-Mg VLT basalt; green glass which might be related to a coarser-grained ferrogabbro; a high-K green glass; and a high-Ti orange glass. Highland glass compositions include Highland basalt, gabbroic anorthosite, and pure anorthosite (i.e. plagioclase); minor Fra Mauro-type glass may also be present. It is apparent that fractional crystallization of some primitive basaltic magma occurred at Mare Crisium producing a chemically evolved ferrobasalt and related glasses. An early, high-Mg basin fill, as represented by the olivine vitrophyres, may be the parent magma. Subsequent near-surface fractionation produced a multiply-saturated liquid that finally erupted as the ferrobasalt flows sampled by Luna 24.

Norman, M.↗

NASA NTRS1982

Some statistical performance characteristics of the 'ITD' modal identification algorithm

Performance characteristics of the Ibrahim time-domain algorithms are examined on a statistical basis. The method uses multiple free-response measurements from a test structure directly in the time domain, and displays varying accuracy, with the strongly excited modes identified most accurately and the weakly excited modes least accurately. Sets of computer-generated free-response functions for a simple 1-mode model are used to study the identification performance for several basic changes in the modal characteristics of the data, the user-selectable analysis constants, and the level of superimposed noise. Results indicate the existence of a direct and often linear effect of noise on the scatter of identified parameters, and good identification is maintained at the 1% noise level down to the point in frequency when only 1/4-cycle of data is analyzed.

Pappa, R. S.↗

NASA NTRS1988

Optimal placement of tuning masses for vibration reduction in helicopter rotor blades

Methods are presented for the reduction of helicopter rotor blade vibration through a formal mathematical optimization technique determination of optimum tuning mass sizes and locations; these are used as design variables that are systematically changed to achieve low values of shear without large mass penalty. Matrix expressions are obtained for the modal shaping parameter and modal shear amplitude that are required for FEM structural analysis of the blade as well as the optimization formulation. Sensitivity derivatives are also obtained. Three different optimization strategies are developed and tested.

Pritchard, Jocelyn I.↗

NASA NTRS1987

Flying Qualities Research Challenges

Traditional flying qualities requirements for airplane dynamics are based on airplane modal response characteristics derived from linear small-perturbation analysis. These requirements are supported by a large experimental data base. The challenge to the flying qualities community is to demonstrate how flying qualities, the control system and aircraft configuration are still closely linked. This is evident in the definition of flying qualities and, as far as pilots are concerned, that flying qualities are still the measure of overall design success.

Steven M Sliwa↗

NASA NTRS2002

Hubble Space Telescope Pointing Performance Due to Micro-Dynamic Disturbances from the NICMOS Cryogenic Cooler

The Vibration Admittance Test (VET) was performed to measure the emitted disturbances of the Near Infrared Camera and Multi-Object Spectrometer (NICMOS) Cryogenic Cooler (NCC) in preparation for NCC installation onboard the Hubble Space Telescope (HST) during Servicing Mission 3B (SM3B). Details of the VET ground-test are described, including facility characteristics, sensor complement and configuration, NCC suspension, and background noise measurements. Kinematic equations used to compute NCC mass center displacements and accelerations from raw measurements are presented, and dynamic equations of motion for the NCC VET system are developed and verified using modal test data. A MIMO linear frequency-domain analysis method is used to compute NCC-induced loads and HST boresight jitter from VET measurements. These results are verified by a nonlinear time-domain analysis approach using a high-fidelity structural dynamics and pointing control simulation for HST. NCC emitted acceleration levels not exceeding 35 micro-g rms were measured in the VET and analysis methods herein predict 3.1 milli-areseconds rms jitter for HST on-orbit. Because the NCC is predicted to become the predominant disturbance source for HST, VET results indicate that HST will continue to meet the 7 milli-arcsecond pointing stability mission requirement in the post-SM3B era.

Clapp, Brian R.↗

NASA NTRS2012

Correlation Results for a Mass Loaded Vehicle Panel Test Article Finite Element Models and Modal Survey Tests

High-fidelity Finite Element Models (FEMs) were developed to support a recent test program at Marshall Space Flight Center (MSFC). The FEMs correspond to test articles used for a series of acoustic tests. Modal survey tests were used to validate the FEMs for five acoustic tests (a bare panel and four different mass-loaded panel configurations). An additional modal survey test was performed on the empty test fixture (orthogrid panel mounting fixture, between the reverb and anechoic chambers). Modal survey tests were used to test-validate the dynamic characteristics of FEMs used for acoustic test excitation. Modal survey testing and subsequent model correlation has validated the natural frequencies and mode shapes of the FEMs. The modal survey test results provide a basis for the analysis models used for acoustic loading response test and analysis comparisons

Maasha, Rumaasha↗

NASA NTRS2015

Retinal Image Quality Assessment for Spaceflight-Induced Vision Impairment Study

Long-term exposure to space microgravity poses significant risks for visual impairment. Evidence suggests such vision changes are linked to cephalad fluid shifts, prompting a need to directly quantify microgravity-induced retinal vascular changes. The quality of retinal images used for such vascular remodeling analysis, however, is dependent on imaging methodology. For our exploratory study, we hypothesized that retinal images captured using fluorescein imaging methodologies would be of higher quality in comparison to images captured without fluorescein. A semi-automated image quality assessment was developed using Vessel Generation Analysis (VESGEN) software and MATLAB® image analysis toolboxes. An analysis of ten images found that the fluorescein imaging modality provided a 36% increase in overall image quality (two-tailed p=0.089) in comparison to nonfluorescein imaging techniques.

retina↗

NASA NTRS1987

Advances in computational structural and solid mechanics; Proceedings of the First World Congress on Computational Mechanics, University of Texas, Austin, Sept. 22-26, 1986

Papers are presented on the nonlinear dynamic analysis of quasi-symmetric anisotropic structures, the analysis of large deformations of membrane shells by the generalized finite difference method, the vibration of shear-deformable laminated plate structures by the finite strip method, and Coon's surface method for the formulation of finite elements for plates and shells. Other topics include an evaluation of higher-order modal methods for calculating the transient structural response, a nonlinear dynamic analysis of frame structures, and a nonlinear analysis of a truss by energy minimization. Also considered are an incremental Galerkin method for plates and stiffened plates, a comparison of the postbuckling behavior of plates and shells, and a general solution of bending in a cylindrical shell.

Noor, Ahmed K.↗

NASA NTRS1994

Analysis of the Effects of Surface Pitting and Wear on the Vibrations of a Gear Transmission System

A comprehensive procedure to simulate and analyze the vibrations in a gear transmission system with surface pitting, 'wear' and partial tooth fracture of the gear teeth is presented. An analytical model was developed where the effects of surface pitting and wear of the gear tooth were simulated by phase and magnitude changes in the gear mesh stiffness. Changes in the gear mesh stiffness were incorporated into each gear-shaft model during the global dynamic simulation of the system. The overall dynamics of the system were evaluated by solving for the transient dynamics of each shaft system simultaneously with the vibration of the gearbox structure. In order to reduce the number of degrees-of-freedom in the system, a modal synthesis procedure was used in the global transient dynamic analysis of the overall transmission system. An FFT procedure was used to transform the averaged time signal into the frequency domain for signature analysis. In addition, the Wigner-Ville distribution was also introduced to examine the gear vibration in the joint time frequency domain for vibration pattern recognition. Experimental results obtained from a gear fatigue test rig at NASA Lewis Research Center were used to evaluate the analytical model.

Choy, F. K.↗

NASA NTRS2005

Identification of Cyclically Symmetric Resonance in Experimental Data for Engine Failure Analysis

Many structural components are rotationally symmetric. For a perfectly manufactured structure, the modal wave shapes are exactly sinusoidal. These structures can be excited by similarly-shaped forcing functions such as those found frequently in or near turbomachinery. Due to orthogonality, resonance occurs only when the integer wave number of the structure equals the integer wave number of the excitation as well as when the excitation frequency is close to the natural frequency of the mode. This resonance can lead to high-cycle fatigue (HCF) cracking of the structure. To help understand this phenomenon, it is desirable to determine the modal composition of the response and excitation. Once the modal composition is known, either the excitation or the structure can be modified to reduce the response and therefore prevent HCF cracking.

Medley, Steve↗

NASA NTRS2022

Linear Disturbance Amplification Over Blunted Flat Plates in High-Speed Flows

Modal and nonmodal instability characteristics of cylindrically blunted flat plates with varying leading edge radii are described for Mach 4 and Mach 6 freestream conditions. The selection of leading edge radii and freestream parameters is informed by experimental conditions. The investigation of this 2D problem provides a slow entropy layer swallowing which allows for an isolated development of perturbations seeded upstream within different wall-normal regions of the flow. At both Mach numbers, a decrease in modal instability amplification was seen as the leading edge radius was increased. Nonmodal analysis reveals amplifying perturbations in the boundary layer as well as in the entropy layer. The medium bluntness regime exhibits the strongest amplification of nonmodal disturbances that is nonmonotonic in character. Small amplitude boundary forcing at the plate surface or volumetric forcing at various wall-normal heights was used to account for receptivity effects. While wall forcing effectively induced modal instabilities, only an actuation above the boundary layer captured disturbances that amplify within the entropy layer. The optimal nonmodal theory’s entropy-layer disturbance evolution exhibited outstanding agreement with controlled forcing, including receptivity effects. The evolution of entropy-layer disturbances from the optimal nonmodal theory showed excellent agreement with the results of receptivity to controlled forcing. Therefore, the nonmodal optimal growth analysis may provide a useful as well as efficient technique to identify the complete disturbance spectrum in blunt hypersonic configurations, where both modal and nonmodal disturbances can amplify in the boundary-layer and entropy-layer regions.

Boundary layer transition↗