Search NASA⌕ Search

SEARCH · Search NASA

Results for “Model Sensitivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39
All sourcesNASA NTRSDOE OSTI
NASA NTRS2019

The WRF Lightning Forecasting Algorithm: Sensitivities to Microphysics and Boundary Layer Physics Schemes

As with WRF model simulated convection in general, LFA output is sensitive to cloud and PBL physics. WRF convection is also sensitive to model initialization uncertainties and unresolved errors.  Large sensitivity exists in HRRR-like Thompson microphysics and PBL, for which original LFA calibration constant needs to be multiplied by 1.13 to give proper FRD amplitudes. Thompson microphysics scheme also shows poorest correlations relative to reference data, suggesting low predictability of HRRR LFA output. Need to validate HRRR LFA against GLM observations.

weather prediction↗
NASA NTRS2011

Pressure-Sensitive Paint Measurements on the NASA Common Research Model in the NASA 11-ft Transonic Wind Tunnel

The luminescence lifetime technique was used to make pressure-sensitive paint (PSP) measurements on a 2.7% Common Research Model in the NASA Ames 11ft Transonic Wind Tunnel. PSP data were obtained on the upper and lower surfaces of the wing and horizontal tail, as well as one side of the fuselage. Data were taken for several model attitudes of interest at Mach numbers between 0.70 and 0.87. Image data were mapped onto a three-dimensional surface grid suitable both for comparison with CFD and for integration of pressures to determine loads. Luminescence lifetime measurements were made using strobed LED (light-emitting diode) lamps to illuminate the PSP and fast-framing interline transfer cameras to acquire the PSP emission.

Bell, James H.↗
NASA NTRS2003

Comment on 'Modeling of Convective-Stratiform Precipitation Processes: Sensitivity to Partitioning Methods' by Matthias Steiner

Despite the obvious notion that the presence of hail or graupel is a good indication of convection, the model results show this does not provide an objective benchmark partly due to the unrealistic presence of small amounts of hail or graupel throughout the anvil in the model but mainly because of the significant amounts of hail or graupel, especially in the tropical TOGA COARE simulation, in the transition zone. Without use of a "transition" category, it is open to debate as how this region should best be defined, as stratiform or as convective. So, the presence of significant hail or graupel contents in this zone significantly degrades its use an objective benchmark for convection. The separation algorithm comparison was done in the context of a cloud-resolving model. These models are widely used and serve a variety of purposes especially with regard to retrieving information that cannot be directly measured by providing synthetic data sets that are consistent and complete. Separation algorithms are regularly applied in these models. However, as with any modeling system, these types 'of models are constantly being improved to overcome any known deficiencies and make them more accurate representations of observed systems. The presence of hail and graupel in the anvil and the bias towards heavy rainfall rates are two such examples of areas that need improvement. Since, both of these can effect the perceived performance of the separation algorithms, the Lang et al. (2003) study did not want to overstate the relative performance of any specific algorithms.

Lang, Steve↗
NASA NTRS2015

Investigating Sensitivity to Saharan Dust in Tropical Cyclone Formation Using Nasa's Adjoint Model

As tropical cyclones develop from easterly waves coming of the coast of Africa they interact with dust from the Sahara desert. There is a long standing debate over whether this dust inhibits or advances the developing storm and how much influence it has. Dust can surround the storm and absorb incoming solar radiation, cooling the air below. As a result an energy source for the system is potentially diminished, inhibiting growth of the storm. Alternatively dust may interact with clouds through micro-physical processes, for example by causing more moisture to condense, potentially increasing the strength. As a result of climate change, concentrations and amount of dust in the atmosphere will likely change. It it is important to properly understand its effect on tropical storm formation. The adjoint of an atmospheric general circulation model provides a very powerful tool for investigating sensitivity to initial conditions. The National Aeronautics and Space Administration (NASA) has recently developed an adjoint version of the Goddard Earth Observing System version 5 (GEOS-5) dynamical core, convection scheme, cloud model and radiation schemes. This is extended so that the interaction between dust and radiation is also accounted for in the adjoint model. This provides a framework for examining the sensitivity to dust in the initial conditions. Specifically the set up allows for an investigation into the extent to which dust affects cyclone strength through absorption of radiation. In this work we investigate the validity of using an adjoint model for examining sensitivity to dust in hurricane formation. We present sensitivity results for a number of systems that developed during the Atlantic hurricane season of 2006. During this period there was a significant outbreak of Saharan dust and it is has been argued that this outbreak was responsible for the relatively calm season. This period was also covered by an extensive observation campaign. It is shown that the adjoint can provide insight into the sensitivity and reveals a relatively low sensitivity to dust compared to, for example, the thermodynamic variables. However a secondary sensitivity though moisture is seen. If dust dries the air it can significantly reduce the cyclone intensity through the moisture.

Tropical Cyclones↗
DOE OSTI2025

Estimating evapotranspiration from deciduous broadleaf forests by considering the effect of foliar litter

Forest litter cover significantly alters the ground surface resistance, which influences the water and energy transfer processes between the land surface and atmosphere. Penman-Monteith (PM) model is widely used to estimate land surface evapotranspiration (ET). However, it was shown to overestimate ET during the period when foliar litter covers the ground surface. Therefore, incorporating the effect of foliar litter on ground surface resistance can potentially improve ET estimates. Here, in this study, we proposed a foliar litter surface resistance model to describe the effect of litter cover on water vapor transport, then incorporated the litter surface resistance into the PM model (noted as PM-EL model). The performance of the PM-EL model was evaluated using observations from 18 deciduous broadleaf forest (DBF) flux sites across global FLUXNET2015 datasets. Results showed that: (1) both the PM model and the PM-EL model are most sensitive to ground surface resistance among resistance parameters; (2) the proposed litter resistance model is capable of describing the seasonal dynamic of litter in DBF ; (3) the PM-EL model, has been shown to improve ET estimates with the coefficient of determination increased by 8.5 %, the mean absolute error and relative root mean square error decreased by 22.1 % and 20.9 %, respectively. The study contributes to our understanding of the effect of litter cover on ET estimation and provides insights into forest ecohydrology and land surface mass and energy transfer processes.

Deciduous Broadleaf Forest↗
NASA NTRS1975

Atmospheric response to variations in sea-surface temperature

A two-week prediction experiment was performed with the GISS atmospheric model on a global data set beginning 20 December 1972 to test the sensitivity of the model to sea-surface temperature (SST) variations. Use of observed SST's in place of climatological monthly mean sea temperatures for surface flux calculations in the model was found to have a marked local effect on predicted precipitation over the ocean, with enhanced convection over warm SST anomalies. However, use of observed SST's did not lead to any detectable general improvement in forecast skill. The influence of the SST anomalies on daily predicted fields of pressure and geopotential was small up to about one week compared with the growth of prediction error, and no greater over a two-week period than that resulting from random errors in the initial meteorological state. The 14-day average fields of sea-level pressure and 500 mb height predicted by the model were similarly insensitive to the SST anomalies.

Spar, J.↗
NASA NTRS1993

Observational and modeling studies of the influence of sea ice anomalies on atmospheric circulation

The effects of sea ice on short-term climate variability are studied by comparing the speculated and model-derived climatic roles of sea ice with the observational evidence. It is concluded that sea ice variations have large local impacts on the lower atmosphere which can be useful in local forecasting at the 30-90 day range. Observational studies are found to be severely constrained by the fact that atmospheric forcing plays a major role in the development of sea ice anomalies. Global climate models exhibit significant sensitivities to large changes of sea ice coverage. While the responses of different models are similar in many respects, there are inconsistencies among the models in the changes of some fundamental variables.

Walsh, John E.↗
NASA NTRS1993

Large eddy simulations of time-dependent and buoyancy-driven channel flows

The primary goal of this work has been to assess the performance of the dynamic SGS model in the large eddy simulation (LES) of channel flows in a variety of situations, viz., in temporal development of channel flow turned by a transverse pressure gradient and especially in buoyancy-driven turbulent flows such as Rayleigh-Benard and internally heated channel convection. For buoyancy-driven flows, there are additional buoyant terms that are possible in the base models, and one objective has been to determine if the dynamic SGS model results are sensitive to such terms. The ultimate goal is to determine the minimal base model needed in the dynamic SGS model to provide accurate results in flows with more complicated physical features. In addition, a program of direct numerical simulation (DNS) of fully compressible channel convection has been undertaken to determine stratification and compressibility effects. These simulations are intended to provide a comparative base for performing the LES of compressible (or highly stratified, pseudo-compressible) convection at high Reynolds number in the future.

Cabot, William H.↗
NASA NTRS1995

PSC algorithm description

An overview of the performance seeking control (PSC) algorithm and details of the important components of the algorithm are given. The onboard propulsion system models, the linear programming optimization, and engine control interface are described. The PSC algorithm receives input from various computers on the aircraft including the digital flight computer, digital engine control, and electronic inlet control. The PSC algorithm contains compact models of the propulsion system including the inlet, engine, and nozzle. The models compute propulsion system parameters, such as inlet drag and fan stall margin, which are not directly measurable in flight. The compact models also compute sensitivities of the propulsion system parameters to change in control variables. The engine model consists of a linear steady state variable model (SSVM) and a nonlinear model. The SSVM is updated with efficiency factors calculated in the engine model update logic, or Kalman filter. The efficiency factors are used to adjust the SSVM to match the actual engine. The propulsion system models are mathematically integrated to form an overall propulsion system model. The propulsion system model is then optimized using a linear programming optimization scheme. The goal of the optimization is determined from the selected PSC mode of operation. The resulting trims are used to compute a new operating point about which the optimization process is repeated. This process is continued until an overall (global) optimum is reached before applying the trims to the controllers.

Nobbs, Steven G.↗
NASA NTRS2011

A Model of Silicate Grain Nucleation and Growth in Circumstellar Outflows

Based on its abundance, high bond energy, and recent measurements of its vapor pressure SiO is a natural candidate for dust nucleation in circumstellar outflows around asymptotic giant branch stars. In this paper, we describe a model of the nucleation and growth of silicate dust in such outflows. The sensitivity of the model to varying choices of poorly constrained chemical parameters is explored, and the merits of using scaled rather than classical nucleation theory are briefly considered, An elaboration of the model that includes magnesium and iron as growth species is then presented and discussed. The composition of the bulk of the grains derived from the model is consistent with olivines and pyroxenes, but somewhat metal-rich grains and very small, nearly pure SiO grains are also produced,

Paquette, John A.↗
NASA NTRS2023

An Evaluation of A Physics-Based Firn Model and A Semi-Empirical Firn Model Across the Greenland Ice Sheet (1980–2020)

The Greenland Ice Sheet's (GrIS) firn layer buffers the ice sheet's contribution to sea level rise by storing meltwater in its pore space. However, available pore space and meltwater retention capability is lost due to ablation of the firn layer and refreezing of meltwater as near-surface ice slabs in the firn. Understanding how firn properties respond to climate is important for constraining the GrIS's future contribution to sea level rise in a warming climate. Observations of firn density provide detailed information about firn properties, but they are spatially and temporally limited. Here we use two firn models, the physics-based SNOWPACK model and the Community Firn Model configured with a semi-empirical densification equation (CFM-GSFC), to quantify firn properties across the GrIS from 1980 through 2020. We use an identical forcing (Modern-Era Retrospective Analysis for Research and Applications, version 2 (MERRA-2) atmospheric reanalysis) for SNOWPACK and the CFM-GSFC in order to isolate firn model differences. To evaluate the models, we compare simulated firn properties, including firn air content (FAC), to measurements from the Surface Mass Balance and Snow on Sea Ice Working Group (SUMup) dataset of snow and firn density. Both models perform well (mean absolute percentage errors of 14 % in SNOWPACK and 16 % in the CFM-GSFC), though their performance is hindered by the spatial resolution of the atmospheric forcing. In the ice-sheet-wide simulations, the 1980–1995 average spatially integrated FAC (i.e., air volume in the firn) for the upper 100 m is 34 645 km 3 from SNOWPACK and 28 581 km 3 from the CFM-GSFC. The discrepancy in the magnitude of the modeled FAC stems from differences in densification with depth and variations in the sensitivity of the models to atmospheric forcing. In more recent years (2005–2020), both models simulate substantial depletion of pore space. During this period, the spatially integrated FAC across the entire GrIS decreases by 3.2 % (−66.6 km 3 yr −1 ) in SNOWPACK and 1.5 % (−17.4 km 3 yr −1 ) in the CFM-GSFC. These differing magnitudes demonstrate how model differences propagate throughout the FAC record. Over the full modeled record (1980–2020), SNOWPACK simulates a loss of pore space equivalent to 3 mm of sea level rise buffering, while the CFM-GSFC simulates a loss of 1 mm. The greatest depletion in FAC is along the margins and especially along the western margin where observations and models show the formation of near-surface, low-permeability ice slabs that may inhibit meltwater storage.

Megan Thompson-Munson↗
NASA NTRS1998

An Incidence Loss Model for Wave Rotors with Axially Aligned Passages

A simple mathematical model is described to account for the losses incurred when the flow in the duct (port) of a wave rotor is not aligned with the passages. The model, specifically for wave rotors with axially aligned passages, describes a loss mechanism which is sensitive to incident flow angle and Mach number. Implementation of the model in a one-dimensional CFD based wave rotor simulation is presented. Comparisons with limited experimental results are consistent with the model. Sensitivity studies are presented which highlight the significance of the incidence loss relative to other loss mechanisms in the wave rotor.

Paxson, Daniel E.↗
DOE OSTI2024

Spectral Data Fusion From Handheld Laser-Induced Breakdown Spectroscopy (LIBS) and X-ray Fluorescence (XRF) Analyzers for Improved Detection of Cerium in a Simulated Dispersal Accident

Here, this work implements a mid-level data fusion methodology on spectral data from handheld X-ray fluorescence and laser-induced breakdown spectroscopy analyzers to quantify plutonium surrogate (CeO 2 ) contamination in soil samples for the first time. Spectral data from each analyzer were used independently to train supervised machine learning regressions to predict Ce concentration. Fused features from both data sets were then used to train the same models, comparing prediction performance by evaluating model precision and sensitivity. Fusing principal component scores from the two sensors yielded an order of magnitude improvement in precision and sensitivity of predictions made with an artificial neural network, compared to predictions made by models trained on independent sensor data. As a result, a boosted ensemble trained on the fused spectral features yielded an ideal predictor with root-mean-squared error on the order of 10 –6 and calculated limit of detection order 10 –5 wt %.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
NASA NTRSDate not supplied

TPSAS-NF1676L-20351-DND

Characterization of atmospheric variability is crucial to the design of the Entry, Descent, and Landing (EDL) activities at Mars. The distribution of dust in the Martian atmosphere has a significant impact on the atmospheric structure and variability. Information obtained through reconstruction of EDL data from past missions can be used in studying the performance of a model used in preflight atmospheric characterization for future missions. We use the Mars Weather Research and Forecasting (MarsWRF) General Circulation Model to simulate the atmospheric temperature during the landing time periods of Mars Exploration Rovers MER-A and MER-B in 2004. The multi-scale capability of MarsWRF is useful for conducting high- resolution nested simulation centered at the landing site. This version of MarsWRF includes a high spectral accuracy k-distribution radiative transfer model. We use the IR dust opacity profile data from the Thermal Emission spectrometer (TES) limb scan data as well as the TES Nadir data to prescribe the dust opacity distribution. Data from MY 26, which corresponds to the year of MER landing, and data from a climatology based on the median of 4 years (MY24 to MY27) of TES data are used. Model temperature profiles are compared with the reconstructions from EDL data and TES observations. Sensitivity of the model simulation to variations in the input opacity data are shown.

Murali Natarajan↗
NASA NTRS1993

Atmospheric moisture fields derived by satellite observations over the tropical Pacific Ocean

Values of precipitable water are retrieved over the tropical and subtropical Pacific Ocean from TOVS infrared and microwave channel brightness temperature and OLR observations by means of stepwise linear regression. The most useful temperature and moisture sensing channels are pre-selected from sensitivity tests of a radiative transfer model. Numerous models are developed and tested against collocated radiosonde observations and Nimbus-7 SMMR precipitable water estimates. For RAOB comparisons, the best estimator used 15 TOVS predictors and captured 71.1 deg percent of the variance (+0.62 g/sq cm standard error) for column precipitable water; for precipitable water of 700-500 mb bulk layer, these values were 71.7 percent and +/- 0.17 g/sq cm. Little skill of estimated precipitable water was obtained for moisture above 500 mb. Regressions were less skillful against SMMR, unless collocation parameters were tightly controlled; SMMR was less acceptable than RAOB's because of observational drift and errors. Generally, the most skillful predictors were boundary layer brightness temperatures of TOVS channels and satellite estimated stability indices. 'Moisture channels' were hardly useful except for estimating middle and upper tropospheric moisture. Additional regression models were constructed testing the sensitivity to different observational and meteorological characteristics. Models which used some in situ observations surface observations or stabilities calculated from RAOB, were the most successful. The best of these explained 87.5 percent of the variance but the regression selected almost no TOVS channels, relying instead on conventional RAOB and surface observations. A set of four regression models were developed, stratifying atmospheric characteristics on the basis of collocated OLR values. These models improved the variance explained by 5.0 percent; the model associated with the highest OLR values (275 W/sq m less than or equal to OLR; that is, no cloud) showed only marginal skill. Precipitable water fields were generated from the best TOVS-only model for seven days in January 1983 and compared with SMMR-estimated fields. OLR fields and ECMWF precipitable water analysis. The TOVS regression model compared favorably to the SMMR analysis in amplitudes and features. It revealed more evolving synoptic signal than the ECMWF analysis. In synoptically active regions, it differed with respect to the OLR analysis, primarily because of actual differences in the vertical distribution of water vapor.

Chung, Hyosang↗
NASA NTRS2002

Tidal Models In A New Era of Satellite Gravimetry

The high precision gravity measurements to be made by recently launched (and recently approved) satellites place new demands on models of Earth, atmospheric, and oceanic tides. The latter is the most problematic. The ocean tides induce variations in the Earth's geoid by amounts that far exceed the new satellite sensitivities, and tidal models must be used to correct for this. Two methods are used here to determine the standard errors in current ocean tide models. At long wavelengths these errors exceed the sensitivity of the GRACE mission. Tidal errors will not prevent the new satellite missions from improving our knowledge of the geopotential by orders of magnitude, but the errors may well contaminate GRACE estimates of temporal variations in gravity. Solar tides are especially problematic because of their long alias periods. The satellite data may be used to improve tidal models once a sufficiently long time series is obtained. Improvements in the long-wavelength components of lunar tides are especially promising.

Ray, Richard D.↗
DOE OSTI2026

Downscaled Daily 1 km Climate Data (NEX-GDDP-CMIP6) for Southeast Texas. Full ensemble of downscaled CMIP6 climate projections at 1 km daily resolution.

For the SETx-UIFL, the daily NASA Earth Exchange Global Daily Downscaled Projections (NEX-GDDP-CMIP6) dataset climate projections were downscaled from approximately 27 km to 1 km. The SETx dataset provides very high-resolution climate data for the historical period (1950–2014) and future scenarios derived from CMIP6 global models under the four Tier 1 Shared Socioeconomic Pathways (SSPs 1.26, 2.45, 3.70, and 5.85), developed for the IPCC Sixth Assessment Report. A subset of ten NEX-GDDP-CMIP6 models was selected to represent a balance of model families, climate sensitivities, and availability across scenarios, ensuring a diverse and reliable ensemble for regional analysis. Selected models: BCC-CSM2-MR, CESM2, CMCC-ESM2, CNRM-ESM2-1, EC-Earth3, FGOALS-g3, GFDL-CM4, MPI-ESM1-2-HR, MRI-ESM2-0, NorESM2-MM. Daily variables downscaled include tasmax, tasmin, tas, pr, hurs, huss, rsds, rlds, and sfcWind.

Persad, Geeta↗
NASA NTRS1993

The Hubble Space Telescope Snapshot Survey. IV - A summary of the search for gravitationally lensed quasars

We report the concluding results of the HST Snapshot Survey for gravitationally lensed quasars. New observations of 153 high-luminosity z above 1 quasars are presented, bringing to 498 the total number of quasars observed in the survey. The new observations do not reveal new candidates for gravitational lensing. We present tables summarizing all of the snapshot observations, with measured V-magnitudes, accurate to 0.1 mag, for each of the quasars successfully observed. The observed frequency of lensing of quasars into multiple images is 3-6 out of 502, depending on whether one counts candidates that are not yet securely confirmed and cases in which clusters play a role. This frequency is in the range predicted by calculations with a vanishing cosmological constant, assuming galaxies can be modeled by unevolving isothermal spheres dominated in their centers by dark matter. The observed frequency is an order of magnitude lower than expected in such models when the universe is strongly dominated by a cosmological constant. This conclusion is, however, sensitive to the model assumptions and to the precise number of actual lensed quasars.

Maoz, D.↗