SEARCH · Search NASA

Results for “Optical Absorption”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

All sources NASA NTRS DOE OSTI

DOE OSTI2020

Water-Stable 1D Hybrid Tin(II) Iodide Emits Broad Light with 36% Photoluminescence Quantum Efficiency

The optical and light emission properties of tin and lead halide perovskites are remarkable because of the robust room-temperature (RT) performance, broad wavelength tunability, high efficiency, and good quenching resistance to defects. These highly desirable attributes promise to transform current light-emitting devices, phosphors, and lasers. One disadvantage in most of these materials is the sensitivity to moisture. Here, we report a new air-stable one-dimensional (1D) hybrid lead-free halide material (DAO)Sn 2 I 6 (DAO, 1,8-octyldiammonium) that is resistant to water for more than 15 h. The material exhibits a sharp optical absorption edge at 2.70 eV and a strong broad orange light emission centered at 634 nm, with a full width at half-maximum (fwhm) of 142 nm (0.44 eV). The emission has a long photoluminescence (PL) lifetime of 582 ns, while the intensity is constant over a very broad temperature range (145–415 K) with a photoluminescence quantum yield (PLQY) of at least 20.3% at RT. Above 415 K the material undergoes a structural phase transition from monoclinic (C2/c) to orthorhombic (Ibam) accompanied by a red shift in the band gap and a quench in the photoluminescence emission. Density functional theory calculations support the trend in the optical properties and the 1D electronic nature of the structure, where the calculated carrier effective masses along the inorganic chain are significantly lower than those perpendicular to the chain. As a result, thin films of the compound readily fabricated from solutions exhibit the same optical properties, but with improved PLQY of 36%, for a 60 nm thick film, among the highest reported for lead-free low-dimensional 2D and 1D perovskites and metal halides.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2014

Temperature effect on optical spectra of monolayer molybdenum disulfide

Recently, measured optical absorption and photoluminescence spectra reveal substantial frequency shifts of both exciton and trion peaks as monolayer molybdenum disulfide, MoS{sub 2}, is cooled from 363 K to 4 K. First-principles simulations using the GW-Bethe-Salpeter equation approach satisfactorily reproduce these frequency shifts by incorporating the thermal expansion effect. Studying these temperature effects in monolayer MoS{sub 2} is crucial for rectifying the results of available experiments with the previous predictions of zero-temperature-limit simulations. Moreover, our estimated thermal expansion coefficient of monolayer MoS{sub 2} is less than that of bulk counterpart by tracking the frequency shifts of the exciton peaks in optical spectra. This may serve as a convenient way to estimate thermal expansion coefficients of general two-dimensional chalcogenides.

36 MATERIALS SCIENCE↗

DOE OSTI2017

Understanding How Acoustic Vibrations Modulate the Optical Response of Plasmonic Metal Nanoparticles

Measurements of acoustic vibrations in nanoparticles provide a unique opportunity to study mechanical phenomena at nanometer length scales and picosecond time scales. Vibrations in noble-metal nanoparticles have attracted particular attention, because they couple to plasmon resonances in the nanoparticles, leading to strong modulation of optical absorption and scattering. There are three mechanisms that transduce the mechanical oscillations into changes in the plasmon resonance: (1) changes in polarizability due to changes in the nanoparticle geometry; (2) changes in electron density due to changes in the nanoparticle volume and (3) changes in the interband transition energies due to compression/expansion of the nanoparticle (deformation potential). These mechanisms have been studied in the past to explain the origin of the experimental signals; however, a thorough quantitative connection between the coupling of phonon and plasmon modes and separate contribution of each coupling mechanism has not yet been made. Here, we present a numerical method to quantitatively determine the coupling between vibrational and plasmon modes in noble-metal nanoparticles of arbitrary geometries, and apply it to spheres, shells, rods, and cubes in the context of time resolved measurements. We separately determine the parts of the optical response that are due to shape changes, changes in electron density, and changes in deformation potential (DP). We further show that coupling is in general strongest when the regions of largest electric field (plasmon mode) and largest displacement (phonon mode) overlap. Lastly, these results clarify reported experimental results, and should help guide future experiments and potential applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

DOE OSTI2022

In-situ Characterizations of Microstructural Degradation of Perovskite Solar Cells

Rapid progress has been achieved in perovskite solar cells (PSCs), and their efficiencies have improved from 3.8 % to 24.2 % in less than a decade. With low-cost processing, PSCs have shown exciting photovoltaic (PV) properties, such as effective optical absorption, a long carrier lifetime, and unique defect tolerance. While recent studies demonstrated improved stability up to 100 days, PSC technology is still challenged to meet the stringent industry requirements for commercialization. Despite considerable efforts, the underlying physical mechanisms for the inferior stability of PSCs are not well understood. One reason for this divergence is that many established measurement techniques (e.g., quantum efficiency, photoluminescence) probe the properties on length scales far greater than that of electronic and/or structural inhomogeneity (i.e., < 1 μm near grain boundaries) and therefore characterize convoluted and/or averaged properties. Ion/electron beam-based techniques have been extensively used to access the microstructures of PSCs, enabling atomic/nanoscale structural, chemical, optical, and electrical characterizations. For example, focused ion beam (FIB) milling produces an atomically smooth surface that minimizes the artifacts attributed to the surface roughness. FIB techniques can also create a well-defined cross-section of PSCs without mechanical damage in a physical cleaving sample preparation. While powerful, there are some concerns about possible beam damage of inorganic-organic perovskites via chemical-bond breakage and local heating. This project aims to comprehensively understand how the microstructural/interfacial properties of PSCs (e.g., Methylammonium Lead Iodide [MAPbI 3 ]) are modified under the irradiating ion beams. Specifically, we investigate the sub-surface properties of PSCs before and after Ar-ion beam injections. Kelvin probe force microscopy (KPFM) measures the contact potential differences (CPDs). Photoluminescence (PL) microscopy in conjunction with Finite-Difference Time-Domain (FDTD) simulations infers the formation of a “dead layer” (< 15 nm) on the subsurface of MAPbI 3 during Ar+ milling processes while preserving the initial bulk properties. The x-ray photoemission spectroscopy (XPS) confirms this modified surface is a lead-rich and iodine-deficient surface. We initiate customizing in-situ measurement setup while measuring the local optical and electrical properties of PSC under thermal (cooling, heating) and light stressors. Our results provide in-depth knowledge of the ion-beam impact on metal-halide perovskites and how this modified sub-surface impacts their properties under accelerated stressors of light and heat. Intensive Monte Carlo simulations of an electron beam interacting with PSCs provide the beam energy distribution in PSCs, proposing possible measurement conditions of using e-beam with minimizing beam damage. Our in-situ measurement platform can accommodate the diverse architecture of PSC devices for studying deterioration mechanisms under mixed environmental stressors.

14 SOLAR ENERGY↗

DOE OSTI2016

Structural, optical, and ferromagnetic characterization of Sm-doped LaOCl nanocrystalline synthesized by solvothermal route: Significant effect of hydrogen post treatment

Pure and Sm-doped lanthanum oxychloride (LaOCl) nanomaterials were synthesized by solvothermal route followed by a subsequent heat treatment process. The objective of the present work is to study and develop conditions required to create stable room-temperature ferromagnetic (RT-FM) properties in LaOCl. To achieve that aim, magnetic samarium Sm{sup 3+} ions were used as dopant sources for stable FM properties. Systematic structural, optical, and magnetic properties of undoped and Sm-doped LaOCl samples were investigated as function of post-annealing conditions (temperature and atmosphere). The optical absorption properties were studied by diffuse reflection spectroscopy (DRS). The magnetic measurements reveal that Sm-doped LaOCl nanopowders have partial RT-FM properties due to the doped ions. The variations of magnetic properties with pre-annealing temperature were investigated. Furthermore, the electronic medium of host LaOCl crystalline lattice, which carries the spin-spin (S.S) exchange interaction between localised dopant Sm{sup 3+}(4f{sup 5}) spins, was developed by annealing in hydrogen gas (hydrogenation). It was established that annealing in hydrogen atmosphere boosts the RT-FM properties so that the saturation magnetisation could be increased by more than 100%. Physical explanations and discussions were given in this paper. Thus, it was proved that the magnetic properties could be tailored to diamagnetic LaOCl compound by Sm-doping and post treatment under H{sub 2} atmosphere. Therefore, LaOCl nanocrystals could be used as a potential candidate for optical phosphor applications with magnetic properties. - Graphical abstract: M-H dependence of Sm-doped LaOCl powders. Study the effect of hydrogenation. - Highlights: • Synthesis of Sm-doped LaOCl nanoparticles. • DM LaOCl transforms to FM with dilute concentration of Sm doping. • Annealing under H{sub 2} atmosphere induces drastic boost in the FM properties. • Saturation magnetization attained 29 memu/g with little doping and hydrogenation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2017

Syntheses, crystal structures, and optical properties of CsBa{sub 5}Ti{sub 2}Se{sub 9}Cl and CsBa{sub 2}Cl{sub 5}

The mixed-cation compounds CsBa{sub 5}Ti{sub 2}Se{sub 9}Cl and CsBa{sub 2}Cl{sub 5} were synthesized in the same solid-state reaction at 1173 K. CsBa{sub 5}Ti{sub 2}Se{sub 9}Cl adopts the Cs{sub 3}CoCl{sub 5} structure type in the tetragonal crystal system whereas CsBa{sub 2}Cl{sub 5} crystallizes in the PbU{sub 2}Se{sub 5} structure type in the monoclinic crystal system. The CsBa{sub 5}Ti{sub 2}Se{sub 9}Cl structure displays both Cs/Ba and Se/Cl disorder. From optical absorption measurements CsBa{sub 5}Ti{sub 2}Se{sub 9}Cl is an indirect wide-gap semiconductor. From theoretical calculations CsBa{sub 2}Cl{sub 5} has a large band gap of 6.4 eV. - Graphical abstract: General view of the crystal structure of CsBa{sub 5}Ti{sub 2}Se{sub 9}Cl. Display Omitted - Highlights: • CsBa{sub 5}Ti{sub 2}Se{sub 9}Cl is an indirect wide-gap semiconductor. • Red crystals of CsBa{sub 5}Ti{sub 2}Se{sub 9}Cl show an absorption transition at 2.00(2) eV. • As expected, DFT calculations indicate CsBa{sub 2}Cl{sub 5} has a large band gap of 6.4 eV. • Unexpectedly, crystals of CsBa{sub 2}Cl{sub 5} are pink, perhaps from minimal Ti impurities.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2012

Very High Efficiency, Hybrid Organic-Inorganic Photovoltaic Cells

This SETP project focuses on developing highly efficient, hybrid organic inorganic photovoltaic (OIPV) cells. The goal is to greatly enhance the power conversion efficiency of hybrid OIPV cells using several innovative approaches. The specific objectives are: (i) to develop new inorganic nanocrystals along with conjugated oligomers and polymers to improve their matching with the solar spectrum; (ii) to engineer the interfacial electronic structures at the hybrid interface to minimize energy and carrier losses during charge transfer; (iii) to understand the assembly of hybrid polymer/nanorod composites and demonstrate hybrid nanostructures that facilitate carrier transport and collection; and (iv) to demonstrate high efficiency hybrid OIPV cells by effectively incorporating materials absorbing in different spectral regions. Through this project, the research team at the University of Florida synthesized a series of new functional organic materials and colloidal nanocrystals with optical absorption covering the near-ultraviolet, visible, and near-infrared regions of the solar spectrum. The team also demonstrated improved understandings on how to control the morphological structure of the organic/inorganic hybrid active layer as well as on the orientation of anisotropic nanostructures in the organic matrix. With the demonstration of several innovative device structures, the efficiency of such hybrid photovoltaic cells was drastically increased. The introduction of proper chemical treatment of the nanocrystal/organic interface and the demonstration of a new light trapping technique (which can also be easily scaled up for large area device fabrication) also contributed to the significant increase in device efficiency. The new knowledge on material synthesis, material processing, device physics, and optical design gained from this project will greatly contribute to the further development of this low-cost PV technology.

14 SOLAR ENERGY↗

DOE OSTI2017

Enhanced Light Absorption in Fluorinated Ternary Small-Molecule Photovoltaics

Using small-molecule donor (SMD) semiconductors in organic photovoltaics (OPVs) has historically afforded lower power conversion efficiencies (PCEs) than their polymeric counterparts. The PCE difference is attributed to shorter conjugated backbones, resulting in reduced intermolecular interactions. Here, a new pair of SMDs is synthesized based on the diketopyrrolopyrrole-benzodithiophene-diketopyrrolopyrrole (BDT-DPP2) skeleton but having fluorinated and fluorinefree aromatic side-chain substituents. Ternary OPVs having varied ratios of the two SMDs with PC61BM as the acceptor exhibit tunable open-circuit voltages (Vocs) between 0.833 and 0.944 V due to a fluorination-induced shift in energy levels and the electronic “alloy” formed from the miscibility of the two SMDs. A 15% increase in PCE is observed at the optimal ternary SMD ratio, with the short-circuit current density (Jsc) significantly increased to 9.18 mA/cm2. The origin of Jsc enhancement is analyzed via charge generation, transport, and diffuse reflectance measurements, and is attributed to increased optical absorption arising from a maximum in film crystallinity at this SMD ratio, observed by grazing incidence wide-angle X-ray scattering.

14 SOLAR ENERGY↗

DOE OSTI2015

Crystal and Electronic Structures of Complex Bismuth Iodides A 3 Bi 2 I 9 ( A = K, Rb, Cs) Related to Perovskite: Aiding the Rational Design of Photovoltaics

Ternary bismuth halides form an interesting functional materials class in the context of the closely related Pb halide perovskite photovoltaics, especially given the significantly reduced toxicity of Bi when compared with Pb. The compounds A 3 Bi 2 I 9 (A = K, Rb, Cs) examined here crystallize in two different structure types: the layered defect-perovskite K 3 Bi 2 I 9 type, and the Cs 3 Cr 2 Cl 9 type. The latter structure type features isolated Bi 2 I 9 3– anions. Here, the crystal structures of the ternary iodides are redetermined and a corrected structural model for Rb 3 Bi 2 I 9 , as established by single crystal X-ray diffraction and solid state 87Rb NMR spectroscopy and supported by density functional theory (DFT) calculations is presented. A variety of facile preparation techniques for single crystals, bulk materials, as well as solution-processed thin films are described. The optical properties and electronic structures are investigated experimentally by optical absorption and ultraviolet photoemission spectroscopy and computationally by DFT calculations. Absolute band positions of the valence and conduction bands of these semiconductors, with excellent agreement of experimental and calculated values, are reported, constituting a useful input for the rational interface design of efficient electronic and optoelectronic devices. The different structural connectivity in the two different structure types, somewhat surprisingly, appears to not impact band positions or band gaps in a significant manner. Computed dielectric properties, including the finding of anomalously large Born effective charge tensors on Bi 3+ , suggest proximal structural instabilities arising from the Bi 3+ 6s 2 lone pair. These anomalous Born effective charges are promising for defect screening and effective charge carrier transport. The structural, electronic, and optical properties of the complex bismuth iodides are to some extent similar to the related lead iodide perovskites. In conclusion, the deeper valence band positions in the complex bismuth iodides point to the need for different choices of hole transport materials for Bi-iodide based solar cell architectures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2018

Exchange-driven intravalley mixing of excitons in monolayer transition metal dichalcogenides

Monolayer transition metal dichalcogenides (TMDCs) are promising two-dimensional (2D) semiconductors for application in optoelectronics. Their optical properties are dominated by two series of photo-excited exciton states—A (XA) and B (XB) 1,2 —that are derived from direct interband transitions near the band extrema. These exciton states have large binding energies and strong optical absorption 3–6 , and form an ideal system to investigate many-body effects in low dimensions. Because spin–orbit coupling causes a large splitting between bands of opposite spins, XA and XB are usually treated as spin-polarized Ising excitons, each arising from interactions within a specific set of states induced by interband transitions between pairs of either spin-up or spin-down bands (TA or TB). Here, by using monolayer MoS 2 as a prototypical system and solving the first-principles Bethe–Salpeter equations, we demonstrate a strong intravalley exchange interaction between TA and TB, indicating that XA and XB are mixed states instead of pure Ising excitons. Using 2D electronic spectroscopy, we observe that an optical excitation of the lower-energy TA induces a population of the higher-energy TB, manifesting the intravalley exchange interaction. This work elucidates the dynamics of exciton formation in monolayer TMDCs, and sheds light on many-body effects in 2D materials.

Guo, Liang↗

DOE OSTI2023

Ultrafast Jahn‐Teller Photoswitching in Cobalt Single‐Ion Magnets

Abstract Single‐ion magnets (SIMs) constitute the ultimate size limit in the quest for miniaturizing magnetic materials. Several bottlenecks currently hindering breakthroughs in quantum information and communication technologies could be alleviated by new generations of SIMs displaying multifunctionality. Here, ultrafast optical absorption spectroscopy and X‐ray emission spectroscopy are employed to track the photoinduced spin‐state switching of the prototypical complex [Co(terpy) 2 ] 2+ (terpy = 2,2′:6′,2″‐terpyridine) in solution phase. The combined measurements and their analysis supported by density functional theory (DFT), time‐dependent‐DFT (TD‐DFT) and multireference quantum chemistry calculations reveal that the complex undergoes a spin‐state transition from a tetragonally elongated doublet state to a tetragonally compressed quartet state on the femtosecond timescale, i.e., it sustains ultrafast Jahn‐Teller (JT) photoswitching between two different spin multiplicities. Adding new Co‐based complexes as possible contenders in the search for JT photoswitching SIMs will greatly widen the possibilities for implementing magnetic multifunctionality and eventually controlling ultrafast magnetization with optical photons.

36 MATERIALS SCIENCE↗

DOE OSTI2020

The Distant, Galaxy Cluster Environment of the Short GRB 161104A at $z\sim 0.8$ and a Comparison to the Short GRB Host Population

We present optical observations of the Swift short-duration gamma-ray burst (GRB) GRB 161104A and its host galaxy at z = 0.793 ± 0.003. We model the multiband photometry and spectroscopy with the stellar population inference code Prospector and explore the posterior using nested sampling. We find a mass-weighted age of $t_m = 2.12^{+0.23}_{-0.21}$ Gyr, stellar mass of log(M/M ⊙ ), metallicity of log(Z/Z ⊙ ), dust extinction of $A_V = 0.08^{+0.08}_{-0.05}$, and low star formation rate of 9.9 × 10 -2 M ⊙ yr -1 . These properties, along with a prominent 4000 Å break and optical absorption lines, classify this host as an early-type, quiescent galaxy. Using Dark Energy Survey galaxy catalogs, we demonstrate that the host of GRB 161104A resides on the outskirts of a galaxy cluster at z ≈ 0.8, situated ≈1 Mpc from the likely brightest cluster galaxy. We also present new modeling for 20 additional short GRB hosts (≈33% of which are early-type galaxies), finding population medians of and $t_m = 1.07^{+1.98}_{-0.67}$ Gyr (68% confidence). We further find that the host of GRB 161104A is more distant, less massive, and younger than the four other short GRB hosts known to be associated with galaxy clusters. Cluster short GRBs have faint afterglows, in the lower ≈11% (≈30%) of observed X-ray (optical) luminosities. We place a lower limit on the fraction of short GRBs in galaxy clusters versus those in the field of ≈5%–13%, consistent with the fraction of stellar mass of ≈10%–20% in galaxy clusters at redshifts 0.1 ≤ z ≤ 0.8. Future studies that take advantage of wider-field and deeper cluster surveys are needed to understand the true rate of short GRBs in clusters and their effect on heavy-element enrichment in the intracluster medium.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2022

Bending as a control knob for the electronic and optical properties of phosphorene nanoribbons

We have assessed mechanical bending as a powerful controlling tool for the electronic structure and optical properties of phosphorene nanoribbons. We use state-of-the-art density functional approximations in our work. The overall performance of the recently developed meta-generalized gradient approximation (meta-GGA) mTASK [Phys. Rev. Materials 5, 063803 (2021)] functional establishes the method as a useful alternative to the screened hybrid HSE06 for better band gaps of phosphorene nanoribbons. We present a detailed analysis to interpret the optical absorption of bent phosphorene nanoribbons using the GW-Bethe-Salpeter approximation. Finally, we demonstrate the important role of the unoccupied in-gap state and conclude that this in-gap state in armchair nanoribbons introduced by bending can significantly affect the properties of low-energy excitons and add some useful opportunities for applications in optoelectronic devices.

36 MATERIALS SCIENCE↗

DOE OSTI2015

Hybrid optical-thermal devices and materials for light manipulation and radiative cooling

In this work, we report on optical design and applications of hybrid meso-scale devices and materials that combine optical and thermal management functionalities owing to their tailored resonant interaction with light in visible and infrared frequency bands. We outline a general approach to designing such materials, and discuss two specific applications in detail. One example is a hybrid optical-thermal antenna with sub-wavelength light focusing, which simultaneously enables intensity enhancement at the operating wavelength in the visible and reduction of the operating temperature. The enhancement is achieved via light recycling in the form of whispering-gallery modes trapped in an optical microcavity, while cooling functionality is realized via a combination of reduced optical absorption and radiative cooling. The other example is a fabric that is opaque in the visible range yet highly transparent in the infrared, which allows the human body to efficiently shed energy in the form of thermal emission. Such fabrics can find numerous applications for personal thermal management and for buildings energy efficiency improvement.

36 MATERIALS SCIENCE↗

DOE OSTI2012

Polaron Absorption for Photovoltaic Energy Conversion in a Manganite-titanate pn Heterojunction

The relation among structure, electric transport, and photovoltaic effect is investigated for a pn heterojunction with strong correlation interactions. A perovskite interface is chosen as a model system consisting of the p-doped strongly correlated manganite Pr{sub 0.64}Ca{sub 0.36}MnO{sub 3} (PCMO) and the n-doped titanate SrTi{sub 1-y}Nb{sub y}O{sub 3} (y = 0.002 and 0.01). High-resolution electron microscopy and spectroscopy reveal a nearly dislocation-free, epitaxial interface and give insight into the local atomic and electronic structure. The presence of a photovoltaic effect under visible light at room temperature suggests the existence of mobile excited polarons within the band-gap-free PCMO absorber. The temperature-dependent rectifying current-voltage characteristics prove to be mainly determined by the presence of an interfacial energy spike in the conduction band and are affected by the colossal electroresistance effect. From the comparison of photocurrents and spatiotemporal distributions of photogenerated carriers (deduced from optical absorption spectroscopy), we discuss the range of the excited polaron diffusion length.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2015

Plasmonic light trapping in an ultrathin photovoltaic layer with film-coupled metamaterial structures

A film-coupled metamaterial structure is numerically investigated for enhancing the light absorption in an ultrathin photovoltaic layer of crystalline gallium arsenide (GaAs). The top subwavelength concave grating and the bottom metallic film could not only effectively trap light with the help of wave interference and magnetic resonance effects excited above the bandgap, but also practically serve as electrical contacts for photon-generated charge collection. The energy absorbed by the active layer is greatly enhanced with the help of the film-coupled metamaterial structure, resulting in significant improvement on the short-circuit current density by three times over a free-standing GaAs layer at the same thickness. The performance of the proposed light trapping structure is demonstrated to be little affected by the grating ridge width considering the geometric tolerance during fabrication. The optical absorption at oblique incidences also shows direction-insensitive behavior, which is highly desired for efficiently converting off-normal sunlight to electricity. The results would facilitate the development of next-generation ultrathin solar cells with lower cost and higher efficiency.

36 MATERIALS SCIENCE↗

DOE OSTI2012

Annealing studies of heteroepitaxial InSbN on GaAs grown by molecular beam epitaxy for long-wavelength infrared detectors

We report the effect of annealing on the structural, vibrational, electrical, and optical properties of heteropepitaxially grown InSbN epilayers on GaAs substrate by molecular beam epitaxy for long-wavelength infrared detector applications. As-grown epilayers exhibited high N incorporation in the both substitutional and interstitial sites, with N induced defects as evidenced from high resolution x-ray diffraction, secondary ion mass spectroscopy, and room temperature (RT) micro-Raman studies. The as-grown optical band gap was observed at 0.132 eV ({approx}9.4 {mu}m) and the epilayer exhibited high background carrier concentration at {approx}10{sup 18} cm{sup -3} range with corresponding mobility of {approx}10{sup 3} cm{sup 2}/Vs. Ex situ and in situ annealing at 430 Degree-Sign C though led to the loss of N but improved InSb quality due to effective annihilation of N related defects and other lattice defects attested to enhanced InSb LO phonon modes in the corresponding Raman spectra. Further, annealing resulted in the optical absorption edge red shifting to 0.12 eV ({approx}10.3 {mu}m) and the layers were characterized by reduced background carrier concentration in the {approx}10{sup 16} cm{sup -3} range with enhanced mobility in {approx}10{sup 4} cm{sup 2}/Vs range.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2014

Compositional trends of γ-induced optical changes observed in chalcogenide glasses of binary As-S system

Compositional trends of γ-induced optical changes in chalcogenide glasses are studied with the binary As-S system. Effects of γ-irradiation and annealing are compared using the changes measured in the fundamental optical absorption edge region. It is shown that annealing near the glass transition temperature leads to bleaching of As-S glasses, while γ-irradiation leads to darkening; both depend on the glass composition and thermal history of the specimens. These results are explained in terms of competitive destruction–polymerization transformations and physical aging occurring in As-S chalcogenide glasses under the influence of γ-irradiation.

Chalcogenide glasses↗