Search NASA⌕ Search

SEARCH · Search NASA

Results for “Particle methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

A numerical investigation of coal particle modeling for the inlet section of a pressurized oxy-combustion burner

Concerns over climate change have led to numerous efforts to develop low-carbon technologies, and pressurized oxy-combustion (POC) is a promising candidate to reduce carbon emissions in the power industry. Designing an effective burner for such technologies is vital for the development of these and other coal combustion technologies. Because of the high pressure, the volume fraction of coal particles at the fuel inlet of the pressurized oxy-combustor burner is close to or even higher than the maximum limit for commercial CFD codes (e.g., ANSYS FLUENT). At these high particle volume fractions, the interactions among particles, fluid flow and wall need to be re-evaluated. The present computational work is a first step in a systematic analysis of the influence of various parameters, like method of particle release, release location, and particle size, in a pilot-scale POC combustor, developed at Washington University in St. Louis (WUSTL). In the POC process, pulverized coal is burned under elevated pressure in an O2-CO2 environment. Specifically, a 15-bar, 100 kWth, POC combustor is modeled employing Ansys FLUENT commercial sodtware using the Reynolds-Averaged Navier-Stokes (RANS) approach. It is revealed that for this pilot-scale, pressurized burner, velocity profiles in the near-wall region exhibit some anomalies. In order to investigate the influence of particle loading in the near-wall region, particle release location was investigated. The numerical simulations incorporate the coupling between the turbulent flow and the particles. A sensitivity investigation of particle release location found that by tuning the release location, the velocity profile can be consistent with the pure gas flow velocity profile. More importantly, the particle releasing location also affects flame stability. Particle size was also found to have a significant impact on particle trajectory, flame stability and temperature. Finally, Large Eddy Simulations (LES) were performed and compared with the results from two-dimensional RANS.

Li, Lei↗

Scanning Mobility Particle Sizer-Portable Optical Particle Spectrometer Intercomparison Field Campaign Report

A portable optical particle spectrometer (POPS) has recently been acquired by the United Kingdom Meteorological (UK Met) Office with the intention of mounting it on an unmanned aerial vehicle (UAV) for atmospheric aerosol research. Before conducting research with the new instrument, an intercomparison has been conducted to test the performance of the POPS against a scanning mobility particle sizer (SMPS) — a veteran and well-characterized particle sizer. As part of the Cloud-Aerosol-Radiation Interactions and Forcing (CLARIFY) campaign, the POPS was installed at the U.S. Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) Climate Research Facility mobile site on Ascension Island in the South Atlantic Ocean, alongside an ARM-operated SMPS. Both instruments sampled continuously from 20 August to 9 September, 2017. The SMPS and the POPS were connected to a common aerosol inlet; however, in the case of the SMPS, the sample air was dried before it entered the instrument. The POPS is a miniaturized optical particle counter designed specifically for use in balloon and UAV applications. The instrument is fully described in Goa et al. (2016) and so is only briefly described here. The POPS samples particles by drawing air through an inlet tube into an optical chamber, where it is illuminated by a 405nm laser. A sheath air flow is used to focus the sample air into the center of the laser beam, and the sample flow is maintained at a near-constant rate by an onboard pump. Side-scattered laser light is reflected into a photomultiplier tube by a hemispherical mirror, and the signal amplitude recorded by a data logger. Individual particle sizes are then inferred by comparing the recorded signal amplitudes to scattering amplitudes calculated using Mie theory. In common with other optical particle counters, the POPS size distributions are influenced by the refractive index used in the Mie calculations. The POPS is calibrated by the manufacturers (Handix Scientific) using latex spheres, with a refractive index (RI) of 1.615+0.001i. Sampling aerosols with a different refractive index, particularly if they are strongly absorbing, will result in significant uncertainties/errors in the particle size distributions (PSDs). We have therefore used scattering amplitude curves (calculated by Handix) for more absorbing aerosols, with an RI of 1.54+0.027i, which is expected to be more representative of the biomass-burning aerosol particles sampled at the ARM site during the CLARIFY campaign. In contrast to the POPS, the SMPS measures particle size using the differential mobility technique after applying an electrical charge to aerosol particles. The method is independent of the refractive index (Ruzer 2013).

CLARIFY, portable optical particle spectrometer, s↗

Particle-Filter-Based Multisensor Fusion For Solving Low-Frequency Electromagnetic NDE Inverse Problems

Flaw profile characterization from NDE measurements is a typical inverse problem. A novel transformation of this inverse problem into a tracking problem, and subsequent application of a sequential Monte Carlo method called particle filtering, has been proposed by the authors in an earlier publication [1]. In this study, the problem of flaw characterization from multi-sensor data is considered. The NDE inverse problem is posed as a statistical inverse problem and particle filtering is modified to handle data from multiple measurement modes. The measurement modes are assumed to be independent of each other with principal component analysis (PCA) used to legitimize the assumption of independence. The proposed particle filter based data fusion algorithm is applied to experimental NDE data to investigate its feasibility.

Data Fusion↗

Hanford Tank Waste Particle Atlas

Several methods have been utilized to perform solid phase characterization. Polarized light microscopy (PLM) is used to identify individual particles based on size, shape, color, and optical properties (e.g., refractive index1, birefringence, extinction positions, and interference figures). Scanning electron microscopy with energy-dispersive spectroscopy (SEM/EDS) is used to detect which elements are present in individual particles and to infer chemical phase identification based on the metals present in combination with the size and shape of the particles. Powder X-ray diffraction (XRD) is used to identify crystalline phases present in bulk samples by matching the X-ray patterns with a library of known patterns for pure phases. Transmission electron microscopy (TEM) is used to identify individual particles by their X-ray diffraction patterns. RAMAN analysis is used to identify bulk sample compositions by matching RAMAN spectra with a library of known patterns. Other specialized techniques have not been employed routinely for Hanford tank waste samples.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

The History of Monte Carlo and MCNP at Los Alamos [Slides]

The Monte Carlo method for radiation particle transport has its origins at LANL dating back to the 1940’s. The creators of these methods were Drs. Stanislaw Ulam, John von Neumann, Robert Richtmyer, and Nicholas Metropolis. Monte Carlo methods for particle transport have been driving computational developments since the beginning of modern computers; this continues today. In the 1950’s and 1960’s, these new methods were organized into a series of special-purpose Monte Carlo codes, including MCS, MCN, MCP, and MCG. These codes were able to transport neutrons and photons for specialized LANL applications. In 1977, these separate codes were combined to create the LANL Monte Carlo N-Particle (MCNP) radiation particle transport code. In 1983, MCNP3 was released for public distribution to the Radiation Safety Information Computational Center (RSICC). MCNP6.3 will be released late in 2021. Each year, LANL has ~100 MCNP new users and RSICC ~1250 new licenses distributed. This talk will review the Los Alamos history of the development of the modern Monte Carlo method and MCNP.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Longitudinally Polarized Hadroproduction of Heavy Quarks

Measurements of double-spin asymmetries for single-inclusive heavy flavor production and for heavy quark correlations are expected to provide valuable information about the spin structure of the nucleon, in particular, the elusive gluon polarization. We discuss progress towards a versatile parton-level Monte-Carlo code for the production and decay of heavy quarks in longitudinally polarized proton-proton collisions at next-to-leading order accuracy of Quantum Chromodynamics (QCD). First phenomenological studies are presented for BNL-RHIC.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Studies on {pi}{sup +}{pi}{sup -} phase motion in the {psi}{sup '}{yields}J/{psi}{pi}{sup +}{pi}{sup -} process

We propose a measurement of the elastic {pi}{pi} scattering phase-shift difference {delta}{sub 0}{sup 0}-{delta}{sub 0}{sup 2} through the {psi}{sup '}{yields}J/{psi}{pi}{sup +}{pi}{sup -} process in the future high statistics BES-III experiment. The decay amplitude is constructed with seven Lorentz invariant form factors and is compared with their theoretical estimation. Based on a Monte Carlo study, it is found that the phase-shift difference can be indeed recovered and, hence, it is expected to be measured in the energy region between 350 and 550 MeV at future BES-III.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Bias in Dynamic Monte Carlo Alpha Calculations

A 1/N bias in the estimate of the neutron time-constant (commonly denoted as α) has been seen in dynamic neutronic calculations performed with MCATK. In this paper we show that the bias is most likely caused by taking the logarithm of a stochastic quantity. We also investigate the known bias due to the particle population control method used in MCATK. We conclude that this bias due to the particle population control method is negligible compared to other sources of bias.

42 ENGINEERING↗

Tracking single particle rotation: Probing dynamics in four dimensions

Direct visualization and tracking of small particles at high spatial and temporal resolution provides a powerful approach to probing complex dynamics and interactions in chemical and biological processes. Analysis of the rotational dynamics of particles adds a new dimension of information that is otherwise impossible to obtain with conventional 3-D particle tracking. In this review, we survey recent advances in single-particle rotational tracking, with highlights on the rotational tracking of optically anisotropic Janus particles. Furthermore, strengths and weaknesses of the various particle tracking methods, and their applications are discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Evaluating {sup 99m}Tc Auger electrons for targeted tumor radiotherapy by computational methods

Purpose: Technetium-99m ({sup 99m}Tc) has been widely used as an imaging agent but only recently has been considered for therapeutic applications. This study aims to analyze the potential use of {sup 99m}Tc Auger electrons for targeted tumor radiotherapy by evaluating the DNA damage and its probability of correct repair and by studying the cellular kinetics, following {sup 99m}Tc Auger electron irradiation in comparison to iodine-131 ({sup 131}I) beta minus particles and astatine-211 ({sup 211}At) alpha particle irradiation. Methods: Computational models were used to estimate the yield of DNA damage (fast Monte Carlo damage algorithm), the probability of correct repair (Monte Carlo excision repair algorithm), and cell kinetic effects (virtual cell radiobiology algorithm) after irradiation with the selected particles. Results: The results obtained with the algorithms used suggested that {sup 99m}Tc CKMMX (all M-shell Coster-Kroning--CK--and super-CK transitions) electrons and Auger MXY (all M-shell Auger transitions) have a therapeutic potential comparable to high linear energy transfer {sup 211}At alpha particles and higher than {sup 131}I beta minus particles. All the other {sup 99m}Tc electrons had a therapeutic potential similar to {sup 131}I beta minus particles. Conclusions: {sup 99m}Tc CKMMX electrons and Auger MXY presented a higher probability to induce apoptosis than {sup 131}I beta minus particles and a probability similar to {sup 211}At alpha particles. Based on the results here, {sup 99m}Tc CKMMX electrons and Auger MXY are useful electrons for targeted tumor radiotherapy.

60 APPLIED LIFE SCIENCES↗

Investigating the Effects of Anisotropic Mass Transport on Dendrite Growth in High Energy Density Lithium Batteries

Dendrite formation on the electrode surface of high energy density lithium (Li) batteries causes safety problems and limits their applications. Suppressing dendrite growth could significantly improve Li battery performance. Dendrite growth and morphology is a function of the mixing in the electrolyte near the anode interface. Most research into dendrites in batteries focuses on dendrite formation in isotropic electrolytes (i.e., electrolytes with isotropic diffusion coefficient). In this work, an anisotropic diffusion reaction model is developed to study the anisotropic mixing effect on dendrite growth in Li batteries. The model uses a Lagrangian particle-based method to model dendrite growth in an anisotropic electrolyte solution. The model is verified by comparing the numerical simulation results with analytical solutions, and its accuracy is shown to be better than previous particle-based anisotropic diffusion models. Several parametric studies of dendrite growth in an anisotropic electrolyte are performed and the results demonstrate the effects of anisotropic transport on dendrite growth and morphology, and show the possible advantages of anisotropic electrolytes for dendrite suppression.

SPH, high energy density lithium batteries, precip↗

Tunneling of a few strongly repulsive hard-sphere bosons in an optical lattice with tight external harmonic confinement: A quantum Monte Carlo investigation in continuous space

The effect of strongly repulsive interactions on the tunneling amplitude of hard-sphere (HS) bosons confined in a simple cubic optical lattice plus tight external harmonic confinement in continuous space is investigated. The quantum variational Monte Carlo (VMC) and the variational path integral (VPI) Monte Carlo techniques are used at zero temperature. The effects of the lattice spacing on the tunneling amplitude are also considered. The occupancies of the lattice sites as a function of the repulsion between the bosons are further revealed. Our chief result is that for a small number of bosons (N=8) the overlap of the wave functions in neighboring wells practically does not change with an increase of the repulsive interactions and changes only minimally for a larger number of particles (N=40). The tunneling amplitude rises with a reduction in the lattice spacing. In addition, the occupancy of the center of the trap decreases in favor of a rise in the occupancy of the lattice sites at the edges of the trap with increasing HS repulsion. Further, it was found that the energy per particle at certain optical-lattice barrier heights is insensitive to the number of particles and variations in the HS diameter of the bosons. In order to support our results, we compare the VMC results with corresponding VPI results.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Method To Synthesize Micronized Spherical Carbon Particles from Lignin

Spherical carbon particles are versatile products that are of interest in polymer modification and scaffolding, catalysis, and energy storage applications. Despite various complex synthesis methods available currently, there is a need for simplified synthesis techniques to develop spherical carbon particles from sustainable feedstock. Here, we report a simple method for manufacturing micronized carbon particles from lignin, a plant biomass derived phenolic oligomer. By careful selection of a good, high boiling solvent that can fully solvate and stabilize lignin, we were able to create spherical free-flowing carbon particles from lignin by a simple solvothermal process and subsequent carbonization. During solvothermal reaction, lignin degrades into fragments via its thermally sensitive bonds. Simultaneously, the residual lignin and its fragments repolymerize, condense into highly cross-linked structures, and eventually precipitate out of solution with a spherical shape. Infrared and NMR spectroscopy data in combination with the rheological properties of thermally condensed, solvated oligomer elucidate evolution in the chemical architecture of lignin. Finally, the coarse-grained molecular dynamics simulations revealed the growth of spherical char from lignin in a good solvent through intermolecular condensation. X-ray diffraction and electron microscopy data show the morphology of the carbonized product—an increase in the carbonization temperature enhances the structural order.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Selective encapsulation by Janus particles

We employ Monte Carlo simulation to examine encapsulation in a system comprising Janus oblate spheroids and isotropic spheres. More specifically, the impact of variations in temperature, particle size, inter-particle interaction range, and strength is examined for a system in which the spheroids act as the encapsulating agents and the spheres as the encapsulated guests. In this picture, particle interactions are described by a quasi-square-well patch model. This study highlights the environmental adaptation and selectivity of the encapsulation system to changes in temperature and guest particle size, respectively. Moreover, we identify an important range in parameter space where encapsulation is favored, as summarized by an encapsulation map. Finally, we discuss the generalization of our results to systems having a wide range of particle geometries.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Forward and small-x QCD physics results from CMS experiment at LHC

The Compact Muon Solenoid (CMS) is one of the two large, multi-purpose experiments at the Large Hadron Collider (LHC) at CERN. During the Run I Phase a large pp collision dataset has been collected and the CMS collaboration has explored measurements that shed light on a new era. Forward and small-x quantum chromodynamics (QCD) physics measurements with CMS experiment covers a wide range of physics subjects. Some of highlights in terms of testing the very low-x QCD, underlying event and multiple interaction characteristics, photon-mediated processes, jets with large rapidity separation at high pseudo-rapidities and the inelastic proton-proton cross section dominated by diffractive interactions are presented. Results are compared to Monte Carlo (MC) models with different parameter tunes for the description of the underlying event and to perturbative QCD calculations. The prominent role of multi-parton interactions has been confirmed in the semihard sector but no clear deviation from the standard Dglap parton evolution due to Bfkl has been observed. An outlook to the prospects at 13 TeV is given.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Search for gauge extensions of the MSSM at the LHC

The extensions of the minimal supersymmetric model (MSSM), driving mainly from the need to solve the {mu} problem, involve novel matter species and gauge groups. These extended MSSM models can be searched for at the LHC via the effects of the gauge and Higgs bosons or their fermionic partners. Traditionally, the focus has been on the study of the extra forces induced by the new gauge and Higgs bosons present in such models. An alternative way of studying such effects is through the superpartners of matter species and the gauge forces. We thus consider a U(1)' gauge extension of the MSSM, and perform an extensive study of the signatures of the model through the production and decays of the scalar quarks and gluino, which are expected to be produced copiously at the LHC. After a detailed study of the distinctive features of such models with regard to the signatures at the LHC, we carry out a detailed Monte Carlo analysis of the signals from the process pp{yields}n leptons+m jets+Ee{sub T}, and compare the resulting distributions with those predicted by the MSSM. Our results show that the searches for the extra gauge interactions in the supersymmetric framework can proceed not only through the forces mediated by the gauge and Higgs bosons but also through the superpartner forces mediated by the gauge and Higgs fermions. Analysis of the events induced by the squark/gluino decays presented here is complementary to the direct Z' searches at the LHC.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Production Unit for Fusible Metal Powders

A pilot production unit for fusible metal powders is considered. The formation of liquid metal particles in a melt generator based on the chamber of a low-thrust rocket engine is described. The systems employed in the proposed unit are itemized, including supply systems for the fuel components and initial powder material; the system for flow-rate measurement; the system for collection of the solidifying metal particles; and the system for automated collection and preliminary analysis of the experimental data.

42 ENGINEERING↗