Search NASA⌕ Search

SEARCH · Search NASA

Results for “Precise Landing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

Pre-Launch Testing of GPS Receivers for Geodetic Space Missions

The methodology used and the results obtained in the pre-flight testing of the Blackjack Global Positioning System (GPS) space receiver for the Vegetation Canopy Lidar Mission (VCL) and the Ice, Cloud, and Land Elevation Satellite (ICESat) spacecraft is described. Both real and simulated signals were used to: (1) assess the accuracy and coverage of the navigation solutions, (2) assess the accuracy and stability of the 1-PPS timing signal, (3) assess the precision of the carrier phase observable, and (4) measure the cold-start time to first fix. In addition, an anechoic chamber was used to measure the antenna phase centers with millimeter-level precision. While the test results have generally been excellent and are discussed in this paper, emphasis is placed on describing the test methodology. It is anticipated that future geodetic satellite missions using GPS for navigation, timing, and precise orbit determination (POD) can employ the same tests for pre-launch performance assessment of their particular receiver.

Davis, George↗

Image Processing

Images are prepared from data acquired by the multispectral scanner aboard Landsat, which views Earth in four ranges of the electromagnetic spectrum, two visible bands and two infrared. Scanner picks up radiation from ground objects and converts the radiation signatures to digital signals, which are relayed to Earth and recorded on tape. Each tape contains "pixels" or picture elements covering a ground area; computerized equipment processes the tapes and plots each pixel, line be line to produce the basic image. Image can be further processed to correct sensor errors, to heighten contrast for feature emphasis or to enhance the end product in other ways. Key factor in conversion of digital data to visual form is precision of processing equipment. Jet Propulsion Laboratory prepared a digital mosaic that was plotted and enhanced by Optronics International, Inc. by use of the company's C-4300 Colorwrite, a high precision, high speed system which manipulates and analyzes digital data and presents it in visual form on film. Optronics manufactures a complete family of image enhancement processing systems to meet all users' needs. Enhanced imagery is useful to geologists, hydrologists, land use planners, agricultural specialists geographers and others.

Source record↗

Temperature Constraints on the Storage and Curation of Volatile-Rich Samples from the Lunar Poles

Final Document is attached. Introduction: NASA's Lunar Exploration Campaign includes Lunar sample return efforts beginning in the mid-2020's and human landed missions in the late 2020's-early 2030's. Volatile-rich samples from the Lunar poles will be high-priority targets due to their resource potential for human explorers and high science value. In order to precisely characterize the nature of these polar volatile materials upon return to Earth, they will need to be transported and curated under conditions that minimize their chemical and physical alteration. NASA Policy Directive (NPD) 7100.10F mandates the preservation of existing extraterrestrial samples with minimal alteration, extensive and quantitative documentation of alteration that is provided to investigators, and "the development of long-range plans" for samples yet to be acquired. This abstract summarizes new efforts by the Astromaterials Acquisition and Curation Office at JSC to assess the optimal

Mitchell, J. L.↗

Imaging Flash Lidar for Safe Landing on Solar System Bodies and Spacecraft Rendezvous and Docking

NASA has been pursuing flash lidar technology for autonomous, safe landing on solar system bodies and for automated rendezvous and docking. During the final stages of the landing from about 1 kilometer to 500 meters above the ground, the flash lidar can generate 3-Dimensional images of the terrain to identify hazardous features such as craters, rocks, and steep slopes. The onboard flight computer can then use the 3-D map of terrain to guide the vehicle to a safe location. As an automated rendezvous and docking sensor, the flash lidar can provide relative range, velocity, and bearing from an approaching spacecraft to another spacecraft or a space station. NASA Langley Research Center has developed and demonstrated a flash lidar sensor system capable of generating 16,000 pixels range images with 7 centimeters precision, at 20 Hertz frame rate, from a maximum slant range of 1800 m from the target area. This paper describes the lidar instrument and presents the results of recent flight tests onboard a rocket-propelled free-flyer vehicle (Morpheus) built by NASA Johnson Space Center. The flights were conducted at a simulated lunar terrain site, consisting of realistic hazard features and designated landing areas, built at NASA Kennedy Space Center specifically for this demonstration test. This paper also provides an overview of the plan for continued advancement of the flash lidar technology aimed at enhancing its performance to meet both landing and automated rendezvous and docking applications.

Amzajerdian, Farzin↗

BioLUC (Bioenergy and Land Use Change) [SWR 13-08]

The National Renewable Energy Laboratory (NREL) has developed a new system dynamics global LUC model intended to examine LUC attributed to biofuel production. The BioLUC model represents major global, stocks, flows and produces results under different food and biofuel demand assumptions, with flexible regional divisions. This model is not intended to generate precise numerical estimates, but instead to provide insights into the drivers and dynamic interactions of LUC, population, dietary choices, and biofuel policy.

Peterson, Steve↗

Controlling the Activity and Stability of Electrochemical Interfaces Using Atom-by-Atom Metal Substitution of Redox Species

Understanding the molecular-level properties of electrochemically active ions at operating electrode–electrolyte interfaces (EEI) is key to the rational development of high-performance nanostructured surfaces for applications in energy technology. An electrochemical cell coupled with ion soft landing is employed to examine the effect of “atom-by-atom” metal substitution on the activity and stability of well-defined redox-active anions, PMo x W 12–x O 40 3– (x = 0, 1, 2, 3, 6, 9, or 12) at nanostructured ionic liquid EEI. A striking observation made by in situ electrochemical measurements and further supported by theoretical calculations is that the substitution of only one to three tungsten atoms by molybdenum atoms in the PW 12 O 40 3– anions results in a substantial spike in their first reduction potential. Specifically, PMo 3 W 9 O 40 3– showed the highest redox activity in both in situ electrochemical measurements and as part of a functional redox supercapacitor device, making it a “super-active redox anion” compared with all other PMo x W 12–x O 40 3– species. Electronic structure calculations showed that metal substitution in PMo x W 12–x O 40 3– causes the lowest unoccupied molecular orbital (LUMO) to protrude locally, making it the “active site” for reduction of the anion. Several critical factors contribute to the observed trend in redox activity including (i) multiple isomeric structures populated at room temperature, which affect the experimentally determined reduction potential; (ii) substantial decrease of the LUMO energy upon replacement of W atoms with more-electronegative Mo atoms; and (iii) structural relaxation of the reduced species produced after the first reduction step. Our results illustrate a path to achieving superior performance of technologically relevant EEIs in functional nanoscale devices through understanding of the molecular-level electronic properties of specific electroactive species with “atom-by-atom” precision.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Flight results from a study of aided inertial navigation applied to landing operations

An evaluation is presented of the approach and landing performance of a Kalman filter aided inertial navigation system using flight data obtained from a series of approaches and landings of the CV-340 aircraft at an instrumented test area. A description of the flight test is given, in which data recorded included: (1) accelerometer signals from the platform of an INS; (2) three ranges from the Ames-Cubic Precision Ranging System; and (3) radar and barometric altimeter signals. The method of system evaluation employed was postflight processing of the recorded data using a Kalman filter which was designed for use on the XDS920 computer onboard the CV-340 aircraft. Results shown include comparisons between the trajectories as estimated by the Kalman filter aided system and as determined from cinetheodolite data. Data start initialization of the Kalman filter, operation at a practical data rate, postflight modeling of sensor errors and operation under the adverse condition of bad data are illustrated.

Mcgee, L. A.↗

Environmental studies of Iceland with ERTS-1 imagery

Imagery from the ERTS-1 satellite can be used to study geological and geophysical phenomena which are important in relation to Iceland's natural resources. Multispectral scanner (MSS) imagery can be used to map areas of altered ground, intense thermal emission, fallout from volcanic eruptions, lava flows, volcanic geomorphology, erosion or build-up of land, snow cover, the areal extent of glaciers and ice caps, etc. At least five distinct vegetation types and barren areas can be mapped using MSS false-color composites. Stereoscopic coverage of iceland by side-lapping ERTS imagery permits precise analysis of various natural phenomena.

Williams, R. S., Jr.↗

An economic analysis of five selected LANDSAT assisted information systems in Oregon

A comparative cost analysis was performed on five LANDSAT-based information systems. In all cases, the LANDSAT system was found to have cost advantages over its alternative. The information sets generated by LANDSAT and the alternative method are not identical but are comparable in terms of satisfying the needs of the sponsor. The information obtained from the LANDSAT system in some cases is said to lack precision and detail. On the other hand, it was found to be superior in terms of providing information on areas that are inaccessible and unobtainable through conventional means. There is therefore a trade-off between precision and detail, and considerations of costs. The projects examined were concerned with locating irrigation circles in Morrow County; monitoring tansy ragwort infestation; inventoring old growth Douglas fir near Spotted Owl habitats; inventoring vegetation and resources in all state-owned lands; and determining and use for Columbia River water policies.

Solomon, S.↗

Design and Testing of the X-38 Spacecraft Primary Parafoil

In August of 1995 the NASA began testing large ram-air parafoils for potential use in the landing phase of spacecraft recovery. This effort eventually became a part of the X-38 project, a technology demonstrator for the International Space Station Emergency Crew Return Vehicle. This paper traces how the original parafoil, used in the U.S. Army Graded Precision Air Delivery System (GPADS), was modified to improve the initial deployment dynamics. A discussion of how test experience with 750 sq ft parafoils has been used to scale up to the full-scale 5500 sq ft and 7500 sq ft parafoils is presented. In particular, the development of two techniques that have greatly improved the repeatability of the parafoil initial deployment and decreased the first stage deployment dynamics are discussed: a first stage upper surface energy modulator and floor vents. Comparisons of trends and results from the various scale parachutes are presented as well as constraints that at times have driven the direction that the design has taken.

DESIGN OPTIMIZATION↗

Robotics Instrument Deployment System Surface Operations for the InSight Mars Lander

This paper describes NASA’s first successful precision robotics instrument placement and release on another astronomical body since Apollo. This operations breakthrough enabled NASA’s InSight lander to detect the first known ‘marsquake’, a faint trembling of Mars’s surface on 6th April 2019, 128 Martian days after landing on Mars on the 26th November 2018. This is the first quake detected on an astronomical body other than Earth or the Moon. This paper describes the operations of the Robotics Instrument Deployment Systems (IDS) that successfully deployed the InSight science payload to the surface of Mars. The payload includes a seismometer (SEIS), Wind and Thermal Shield (WTS) and Heat Flow and Physical Properties Package (HP3), enabling scientists to perform the first comprehensive surface-based geophysical investigation of Mars’ interior structure. In addition, the paper describes the IDS planning and command sequence generation process used for the successful deployment of SEIS, WTS and HP3 on the surface of Mars. The paper concludes with recommendations based on the experience gained from InSight IDS operations. This includes identified technology gaps in the operations of in-situ manipulators for planetary exploration.

Yen, Jeng↗

Vertiport Management from Simulation to Flight: Continued Human Factors Assessment of Vertiport Operations

The Urban Air Mobility concept envisions a new future for transportation in urban environments, primarily focused around vertiport operations. A vertiport refers to an identifiable ground or elevated area used for the vertical takeoff and landing of an aircraft. One critical role within vertiport operations that has been proposed but is under-researched is the vertiport manager. The vertiport manager is expected to manage the ground-to-air operations at the vertiport, but their precise responsibilities, tasks, and challenges are currently undefined. The High Density Vertiplex Subproject at NASA is responsible for developing and testing technologies, concepts, and architectures that will support the infrastructure needed for terminal environments around vertiports. Our previous work investigated ground control station operators performing simulated and live flight operations within a remote operations environment. In the current study, we extended from our previous work to explore the role of a vertiport manager. Specifically, we investigated five participants serving as a vertiport manager across both simulated and live flight operations. We performed multiple knowledge elicitation techniques, a thematic content analysis of qualitative data, and naturalistic observations to create a list of insights, design and training recommendations, and a simplified cognitive task diagram of the vertiport manager’s primary task. Findings from this study are discussed within the context of the current debate on the degree to which this role should be automated. A third alternative is suggested to allow a human vertiport manager to be successful by teaming with increasingly autonomous systems, designing the role to improve safety and efficiency of Urban Air Mobility operations.

AAM↗

Vertiport Management from Simulation to Flight: Continued Human Factors Assessment of Vertiport Operations

The Urban Air Mobility concept envisions a new future for transportation in urban environments, primarily focused around vertiport operations. A vertiport refers to an identifiable ground or elevated area used for the vertical takeoff and landing of an aircraft. One critical role within vertiport operations that has been proposed but is under-researched is the vertiport manager. The vertiport manager is expected to manage the ground-to-air operations at the vertiport, but their precise responsibilities, tasks, and challenges are currently undefined. The High Density Vertiplex Subproject at NASA is responsible for developing and testing technologies, concepts, and architectures that will support the infrastructure needed for terminal environments around vertiports. Our previous work investigated ground control station operators performing simulated and live flight operations within a remote operations environment. In the current study, we extended from our previous work to explore the role of a vertiport manager. Specifically, we investigated five participants serving as a vertiport manager across both simulated and live flight operations. We performed multiple knowledge elicitation techniques, a thematic content analysis of qualitative data, and naturalistic observations to create a list of insights, design and training recommendations, and a simplified cognitive task diagram of the vertiport manager’s primary task. Findings from this study are discussed within the context of the current debate on the degree to which this role should be automated. A third alternative is suggested to allow a human vertiport manager to be successful by teaming with increasingly autonomous systems, designing the role to improve safety and efficiency of Urban Air Mobility operations.

AAM↗

In-flight simulation study of decoupled longitudinal controls for the approach and landing of a STOL aircraft

In this decoupled concept, the natural interactions of the flight variables were suppressed, and the pilot operated a separate controller for each (fore-and-aft control column for flight path angle without speed or pitch attitude change, for example). The handling qualities of the decoupled airplane were judged to be very favorable. The precise path control led to small touchdown point dispersion along with consistently low sink rates. The decoupled control system provided significantly better flying qualities than did conventional SAS applied to the same basic airframe.

Feinreich, B.↗

Commentary: Duckweeds as model organisms for metabolic studies

Duckweeds have many practical applications, for example in human nutrition, as animal feed, in the production of bioplastics or vaccines, and phytoremediation (Acosta et al., 2021). Under most conditions, they reproduce asexually which provides genetically uniform material with predictable patterns of growth that make them ideal as sentinel organisms for phytotoxicity testing (Park et al., 2021). Asexual growth also results in high biomass production which makes duckweeds promising candidates as biofuel feedstocks (Acosta et al., 2021; Liang et al., 2023). In addition, duckweed species like Lemna minor and Spirodela polyrhiza are also reemerging as model organisms in plant biology as high-quality full genome assemblies and other genomic resources become available (Chang et al., 2016; Acosta et al., 2021). We argue that duckweed species are particularly of interest for the study of primary plant metabolism. Primary metabolism concerns the part of metabolism that is directly involved in the growth and development of plants, and which tends to be highly conserved among plant species. What makes duckweeds particularly attractive is that when grown on liquid media more precise control of physiological conditions can be attained relative to growth of plants in soil. Also, due to their relatively simple anatomical structure and asexual reproduction of fronds by budding, precise characterization of the physiological state under study is possible through one simple metric, i.e., the specific growth rate (rate of dry weight increase per existing dry weight), which can be incorporated relatively easily into metabolic models. This is not possible for land plants, such as Arabidopsis, because over the course of their life cycle, they go through multiple growth stages and phases of anatomical differentiation, which are much more complex to quantify. Furthermore, duckweeds can grow on organic substrates under heterotrophic or photomixotrophic conditions that facilitate isotope tracer studies. For example, in a previous study on duckweed by one of the authors, Lemna gibba (L). was grown on glucose with a position-specific 13 C-label that can be detected and resolved by Mass Spectrometry or Nuclear Magnetic Resonance spectrometry. Using this approach, the 13 C-label was traced into biomass compounds formed from glucose, particularly isoprenoid compounds. Some of the resulting labeling patterns were in apparent disagreement with predictions based on known metabolic pathways for the biosynthesis of isopentenyl pyrophosphate, the universal building block for isoprenoids, (Lichtenthaler et al., 1997). From this data it was deduced that isoprenoid compounds such as carotenoids and isoprenoid chains of phytol and plastoquinone, synthesized in the chloroplast, are produced via a previously unreported plant metabolic pathway, now known as the methylerythitol/deoxyxylulose-5-phosphate pathway (Lichtenthaler et al., 1997).

59 BASIC BIOLOGICAL SCIENCES↗

Estimates of the low-level wind shear and turbulence in the vicinity of Kennedy International Airport on 24 June 1975

A study was conducted to estimate the type of wind and turbulence distributions which may have existed at the time of the crash of Eastern Airlines Flight 66 while attempting to land. A number of different wind and turbulence profiles are predicted for the site and date of the crash. The morning and mid-afternoon predictions are in reasonably good agreement with magnitude and direction as reported by the weather observer. Although precise predictions cannot be made during the passage of the thunderstorm which coincides with the time of the accident, a number of different profiles which might exist under or in the vicinity of a thunderstorm are presented. The profile that is most probable predicts the mean headwind shear over 100 m (300 feet) altitude change and the average fluctuations about the mean headwind distribution. This combination of means and fluctuations leads to a reasonable probability that the instantaneous headwind shear would equal the maximum value reported in the flight recorder data.

Lewellen, W. S.↗

Water vapor in the lower stratosphere measured from aircraft flight

Water vapor in the lower stratosphere was measured in situ by two aluminum oxide hygrometers mounted on the nose of an RB57 aircraft. Data were taken nearly continuously from January to May 1974 from an altitude of approximately 11 km to 19 km as the aircraft flew between 70 deg N and 50 deg S over the land areas in the Western Hemisphere. Pseudomeridional cross sections of water vapor and temperature are derived from the flight data and show mixing ratios predominantly between 2 and 4 micron gm/gm with an extreme range of 1 to 8 micron gm/gm. Measurement precision is estimated by comparing the simultaneously measured values from the two flight hygrometer systems. Accuracy is estimated to be about + or - 40 percent at 19 km. A height-averaged latitudinal cross section of water vapor shows symmetry of wet and dry zones.

Hilsenrath, E.↗

Terminal area automatic navigation, guidance, and control research using the Microwave Landing System (MLS). Part 3: A comparison of waypoint guidance algorithms for RNAV/MLS transition

The results of an investigation carried out for the Langley Research Center Terminal Configured Vehicle Program are presented. The investigation generated and compared three path update algorithms designed to provide smooth transition for an aircraft guidance system from DME, VORTAC, and barometric navaids to the more precise MLS by modifying the desired 3-D flight path. The first, called the Zero Cross Track, eliminates the discontinuity in cross track and altitude error by designating the first valid MLS aircraft position as the desired first waypoint, while retaining all subsequent waypoints. The discontinuity in track angle is left unaltered. The second, called the Tangent Path also eliminates the discontinuity in cross track and altitude and choose a new desired heading to be tangent to the next oncoming circular arc turn. The third, called the Continued Track eliminates the discontinuity in cross track, altitude and track angle by accepting the current MLS position and track angle as the desired ones and recomputes the location of the next waypoint. A method is presented for providing a waypoint guidance path reconstruction which treats turns of less than, and greater than, 180 degrees in a uniform manner to construct the desired path.

Pines, S.↗