Search NASA⌕ Search

SEARCH · Search NASA

Results for “Process settings”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

Development and application of a unified balancing approach with multiple constraints

The development of a general analytic approach to constrained balancing that is consistent with past influence coefficient methods is described. The approach uses Lagrange multipliers to impose orbit and/or weight constraints; these constraints are combined with the least squares minimization process to provide a set of coupled equations that result in a single solution form for determining correction weights. Proper selection of constraints results in the capability to: (1) balance higher speeds without disturbing previously balanced modes, thru the use of modal trial weight sets; (2) balance off-critical speeds; and (3) balance decoupled modes by use of a single balance plane. If no constraints are imposed, this solution form reduces to the general weighted least squares influence coefficient method. A test facility used to examine the use of the general constrained balancing procedure and application of modal trial weight ratios is also described.

Zorzi, E. S.↗
NASA NTRS1985

A new description of combined trellis coding with asymmetric modulation

The combination of rate k/(k+t) trellis codes with digital modulations described by an asymmetric 2 sup k+1-point signal constellation has been recently shown to yield performance improvement over the traditional symmetric constellation combined with the same trellis code. The approach taken is to specify an underlying trellis code and then map the output code symbols into the fixed signal constellation based on a rule called mapping by set partitioning. The latter process is tantamount to assigning signals from the constellation to the trellis code transitions so as to maximize the free Euclidean distance of the code. Recently, a new description of trellis codes has been given that combines the above two steps into one. The ideas introduced are further explored, placing particular emphasis on the optimization of the signal constellation asymmetry. It can be concluded that the trellis-coded amplitude modulation (AM) designs given are very close to being optimum.

Simon, M. K.↗
NASA NTRS1985

Heating of thermal helium in the equatorial magnetosphere - A simulation study

The heating of He(+) ions observed by the GEOS satellite at L of about seven starting from an initial anisotropic proton distribution is studied. A simulation of electromagnetic ion cyclotron waves in a plasma consisting of hot anisotropic protons, a dominant thermal hydrogen plasma, and a minority species of helium ions is utilized. It is shown that the thermal ions are heated to 100 times their initial temperature due to the growth of large-amplitude ion cyclotron waves. He(+) ions are heated mainly in the perpendicular direction, and they are heated more than cold H(+) ions. The He(+) ions are heated in a two-step process. First, they are set into oscillations by the growing wave until some of the ions reach a parallel velocity on the order of the resonant velocity; then, strong heating occurs.

Omura, Y.↗
NASA NTRS1984

An attempt to extend the ATI technique to estimate convective rain volumes using satellite data

Digital satellite and radar data of a thunderstorm event that occurred on June 12, 1981 are examined. The processing of both data sets is described. Cumulative area versus count values, and threshold count values for IR and visible satellite data for 13 consecutive time steps are analyzed. The IR and visible satellite images are compared. The relation between radar reflectivity, temperature, and echo height is studied.

Doneaud, A. A.↗
NASA NTRS1986

Status of NTD Ge bolometer material and devices

The first IR Detector Technology Workshop took place at NASA Ames Research Center on July 12 and 13, 1983. The conclusions presented at that meeting are still valid. More was learned about the physics of hopping conduction at very low temperatures which will be important for bolometer design and operation at ever decreasing temperatures. Resistivity measurements were extended down to 50 mK. At such low temperatures, precise knowledge of the neutron capture cross sections sigma (sub n) of the various Ge isotopes is critical if one is to make an accurate prediction of the dopant concentrations and compensation, and therefore resistivity, that will result from a given irradiation. An empirical approach for obtaining the desired resistivity material is described and the process of conducting a set of experiments which will improve the knowledge of the effective sigma (sub n) values for a given location in a particular reactor is discussed. A wider range of NTD Ge samples is now available. Noise measurements on bolometers with ion implanted contacts show the no 1/f noise component appears down to 1 Hz and probably lower.

Haller, E. E.↗
NASA NTRS1987

The Land Analysis System (LAS) - A general purpose system for multispectral image processing

The present, general-purpose Land Analysis System (LAS) for image processing furnishes a comprehensive set of functions for the manipulation of MSS data; the initial version has more than 240 functions and utilities ranging from pixel manipulation to complex classification. A LAS user's guide describes each such function in terms of purpose, input parameters, illustrative examples, algorithms, error messages, and user codes. The LAS source code is so distributed as to simplify system maintenance; the Transportable Application Executive is employed as the user interface, thereby accommodating both expert and novice users by means of menus and tutored prompting.

Wharton, Stephen W.↗
NASA NTRS1988

A mathematical theory of learning control for linear discrete multivariable systems

When tracking control systems are used in repetitive operations such as robots in various manufacturing processes, the controller will make the same errors repeatedly. Here consideration is given to learning controllers that look at the tracking errors in each repetition of the process and adjust the control to decrease these errors in the next repetition. A general formalism is developed for learning control of discrete-time (time-varying or time-invariant) linear multivariable systems. Methods of specifying a desired trajectory (such that the trajectory can actually be performed by the discrete system) are discussed, and learning controllers are developed. Stability criteria are obtained which are relatively easy to use to insure convergence of the learning process, and proper gain settings are discussed in light of measurement noise and system uncertainties.

Phan, Minh↗
NASA NTRS1986

NASA PC software evaluation project

The USL NASA PC software evaluation project is intended to provide a structured framework for facilitating the development of quality NASA PC software products. The project will assist NASA PC development staff to understand the characteristics and functions of NASA PC software products. Based on the results of the project teams' evaluations and recommendations, users can judge the reliability, usability, acceptability, maintainability and customizability of all the PC software products. The objective here is to provide initial, high-level specifications and guidelines for NASA PC software evaluation. The primary tasks to be addressed in this project are as follows: to gain a strong understanding of what software evaluation entails and how to organize a structured software evaluation process; to define a structured methodology for conducting the software evaluation process; to develop a set of PC software evaluation criteria and evaluation rating scales; and to conduct PC software evaluations in accordance with the identified methodology. Communication Packages, Network System Software, Graphics Support Software, Environment Management Software, General Utilities. This report represents one of the 72 attachment reports to the University of Southwestern Louisiana's Final Report on NASA Grant NGT-19-010-900. Accordingly, appropriate care should be taken in using this report out of context of the full Final Report.

Dominick, Wayne D.↗
NASA NTRS1987

Machine-aided indexing for NASA STI

One of the major components of the NASA/STI processing system is machine-aided indexing (MAI). MAI is a computer process that generates a set of indexing terms selected from NASA's thesaurus, is used for indexing technical reports, is based on text, and is reviewed by indexers. This paper summarizes the MAI objectives and discusses the NASA Lexical Dictionary, subject switching, and phrase matching or natural languages. The benefits of using MAI are mentioned, and MAI production improvement and the future of MAI are briefly addressed.

Wilson, John↗
NASA NTRS1990

Optimal Allocation Of Tasks In Hypercube Computers

Uniform tasks distributed uniformly or else assigned to one processor. Investigation in theory of scheduling yielded optimal scheme for allocation of tasks among digital data processors in hypercube ensemble. Applies to tasks that require equal time to execute, performed in any order, and between any two of which equal amounts of communication required. Reduces overall processing time for given set of computational tasks.

Salama, Moktar A.↗
NASA NTRS1990

Aeropropulsion facilities configuration control: Procedures manual

Lewis Research Center senior management directed that the aeropropulsion facilities be put under configuration control. A Configuration Management (CM) program was established by the Facilities Management Branch of the Aeropropulsion Facilities and Experiments Division. Under the CM program, a support service contractor was engaged to staff and implement the program. The Aeronautics Directorate has over 30 facilities at Lewis of various sizes and complexities. Under the program, a Facility Baseline List (FBL) was established for each facility, listing which systems and their documents were to be placed under configuration control. A Change Control System (CCS) was established requiring that any proposed changes to FBL systems or their documents were to be processed as per the CCS. Limited access control of the FBL master drawings was implemented and an audit system established to ensure all facility changes are properly processed. This procedures manual sets forth the policy and responsibilities to ensure all key documents constituting a facilities configuration are kept current, modified as needed, and verified to reflect any proposed change. This is the essence of the CM program.

Lavelle, James J.↗
NASA NTRS1990

Flight-testing of the self-repairing flight control system using the F-15 highly integrated digital electronic control flight research facility

Flight tests conducted with the self-repairing flight control system (SRFCS) installed on the NASA F-15 highly integrated digital electronic control aircraft are described. The development leading to the current SRFCS configuration is highlighted. Key objectives of the program are outlined: (1) to flight-evaluate a control reconfiguration strategy with three types of control surface failure; (2) to evaluate a cockpit display that will inform the pilot of the maneuvering capacity of the damage aircraft; and (3) to flight-evaluate the onboard expert system maintenance diagnostics process using representative faults set to occur only under maneuvering conditions. Preliminary flight results addressing the operation of the overall system, as well as the individual technologies, are included.

Stewart, James F.↗
NASA NTRS1990

Flight-testing of the self-repairing flight control system using the F-15 highly integrated digital electronic control flight research facility

Flight tests conducted with the self-repairing flight control system (SRFCS) installed on the NASA F-15 highly integrated digital electronic control aircraft are described. The development leading to the current SRFCS configuration is highlighted. Key objectives of the program are outlined: (1) to flight-evaluate a control reconfiguration strategy with three types of control surface failure; (2) to evaluate a cockpit display that will inform the pilot of the maneuvering capacity of the damaged aircraft; and (3) to flight-evaluate the onboard expert system maintenance diagnostics process using representative faults set to occur only under maneuvering conditions. Preliminary flight results addressing the operation of the overall system, as well as the individual technologies, are included.

Stewart, James F.↗
NASA NTRS1991

Test chips and ASIC qualification

A test chip set being developed to aid in the qualification of spaceborne Application Specific Integrated Circuits (ASICs) is described. The chip set consists of a process monitor for process parameter verification, a fault chip for yield analysis, a reliability chip for ASIC failure rate analysis, and total ionizing dose and single event upset chips for radiation effect analysis. The test structures contained in these chips are discussed along with representative test results.

Buehler, M. G.↗
NASA NTRS1991

Infrared imaging of extrasolar planets

An optical system for direct detection, in the infrared, of planets orbiting other stars is described. The proposed system consists of a large aperture (about 16 m) space-based telescope to which is attached a specialized imaging instrument containing a set of optical signal processing elements to suppress diffracted light from the central star. Starlight suppression is accomplished using coronagraphic apodization combined with rotational shearing interferometry. The possibility of designing the large telescope aperture to be of a deployable, multiarm configuration is examined, and it is shown that there is some sacrifice in performance relative to a filled, circular aperture.

Diner, David J.↗
NASA NTRS1991

LAGEOS geodetic analysis-SL7.1

Laser ranging measurements to the LAGEOS satellite from 1976 through 1989 are related via geodetic and orbital theories to a variety of geodetic and geodynamic parameters. The SL7.1 analyses are explained of this data set including the estimation process for geodetic parameters such as Earth's gravitational constant (GM), those describing the Earth's elasticity properties (Love numbers), and the temporally varying geodetic parameters such as Earth's orientation (polar motion and Delta UT1) and tracking site horizontal tectonic motions. Descriptions of the reference systems, tectonic models, and adopted geodetic constants are provided; these are the framework within which the SL7.1 solution takes place. Estimates of temporal variations in non-conservative force parameters are included in these SL7.1 analyses as well as parameters describing the orbital states at monthly epochs. This information is useful in further refining models used to describe close-Earth satellite behavior. Estimates of intersite motions and individual tracking site motions computed through the network adjustment scheme are given. Tabulations of tracking site eccentricities, data summaries, estimated monthly orbital and force model parameters, polar motion, Earth rotation, and tracking station coordinate results are also provided.

Smith, D. E.↗
NASA NTRS1992

S3D: An interactive surface grid generation tool

S3D, an interactive software tool for surface grid generation, is described. S3D provides the means with which a geometry definition based either on a discretized curve set or a rectangular set can be quickly processed towards the generation of a surface grid for computational fluid dynamics (CFD) applications. This is made possible as a result of implementing commonly encountered surface gridding tasks in an environment with a highly efficient and user friendly graphical interface. Some of the more advanced features of S3D include surface-surface intersections, optimized surface domain decomposition and recomposition, and automated propagation of edge distributions to surrounding grids.

Luh, Raymond Ching-Chung↗
NASA NTRS1992

TUNS/TCIS information model/process model

An Information Model is comprised of graphical and textual notation suitable for describing and defining the problem domain - in our case, TUNS or TCIS. The model focuses on the real world under study. It identifies what is in the problem and organizes the data into a formal structure for documentation and communication purposes. The Information Model is composed of an Entity Relationship Diagram (ERD) and a Data Dictionary component. The combination of these components provide an easy to understand methodology for expressing the entities in the problem space, the relationships between entities and the characteristics (attributes) of the entities. This approach is the first step in information system development. The Information Model identifies the complete set of data elements processed by TUNS. This representation provides a conceptual view of TUNS from the perspective of entities, data, and relationships. The Information Model reflects the business practices and real-world entities that users must deal with.

Wilson, James↗