Search NASA⌕ Search

SEARCH · Search NASA

Results for “REFLECT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

X-Ray Reflection and an Exceptionally Long Thermonuclear Helium Burst from IGR J17062-6143

Thermonuclear X-ray bursts from accreting neutron stars power brief but strong irradiation of their surroundings, providing a unique way to study accretion physics. We analyze MAXI /Gas Slit Camera and Swift /XRT spectra of a day-long flash observed from IGR J17062-6143 in 2015. It is a rare case of recurring bursts at a low accretion luminosity of 0.15% Eddington. Spectra from MAXI , Chandra , and NuSTAR observations taken between the 2015 burst and the previous one in 2012 are used to determine the accretion column. We find it to be consistent with the burst ignition column of 5×10{sup 10} g cm{sup −2}, which indicates that it is likely powered by burning in a deep helium layer. The burst flux is observed for over a day, and decays as a straight power law: F ∝ t {sup −1.15}. The burst and persistent spectra are well described by thermal emission from the neutron star, Comptonization of this emission in a hot optically thin medium surrounding the star, and reflection off the photoionized accretion disk. At the burst peak, the Comptonized component disappears, when the burst may dissipate the Comptonizing gas, and it returns in the burst tail. The reflection signal suggests that the inner disk is truncated at ∼10{sup 2} gravitational radii before the burst, but may move closer to the star during the burst. At the end of the burst, the flux drops below the burst cooling trend for 2 days, before returning to the pre-burst level.

79 ASTRONOMY AND ASTROPHYSICS↗

Relativistic Disk Reflection in the Neutron Star X-Ray BinaryXTE J1709-267 with NuSTAR

We perform the first reflection study of the soft X-ray transient and Type 1 burst source XTE J1709-267 using NuSTAR observations during its 2016 June outburst. There was an increase in flux near the end of the observations, which corresponds to an increase from ∼0.04 L {sub Edd} to ∼0.06 L {sub Edd} assuming a distance of 8.5 kpc. We have separately examined spectra from the low- and high-flux intervals, which are soft and show evidence of a broad Fe K line. Fits to these intervals with relativistic disk reflection models have revealed an inner-disk radius of 13.8{sub −1.8}{sup +3.0} R{sub g} (where R{sub g}=GM/c{sup 2}) for the low-flux spectrum and 23.4{sub −5.4}{sup +15.6} R{sub g} for the high-flux spectrum at the 90% confidence level. The disk is likely truncated by a boundary layer surrounding the neutron star (NS) or the magnetosphere. Based on the measured luminosity and the accretion efficiency for a disk around an NS, we estimate that the theoretically expected size for the boundary layer would be ∼0.9--1.1 R{sub g} from the NS’s surface, which can be increased by spin or viscosity effects. Another plausible scenario is that the disk could be truncated by the magnetosphere. We place a conservative upper limit on the strength of the magnetic field at the poles (assuming a{sub ∗}=0 and M{sub NS}=1.4M{sub ⊙}) of B⩽0.75−3.70×10{sup 9} G, though X-ray pulsations have not been detected from this source.

79 ASTRONOMY AND ASTROPHYSICS↗

Living on a Flare: Relativistic Reflection in V404 Cyg Observed by NuSTAR during Its Summer 2015 Outburst

We present first results from a series of NuSTAR observations of the black hole X-ray binary V404 Cyg obtained during its summer 2015 outburst, primarily focusing on observations during the height of this outburst activity. The NuSTAR data show extreme variability in both the flux and spectral properties of the source. This is partly driven by strong and variable line-of-sight absorption, similar to previous outbursts. The latter stages of this observation are dominated by strong flares, reaching luminosities close to Eddington. During these flares, the central source appears to be relatively unobscured and the data show clear evidence for a strong contribution from relativistic reflection, providing a means to probe the geometry of the innermost accretion flow. Based on the flare properties, analogies with other Galactic black hole binaries, and also the simultaneous onset of radio activity, we argue that this intense X-ray flaring is related to transient jet activity during which the ejected plasma is the primary source of illumination for the accretion disk. If this is the case, then our reflection modeling implies that these jets are launched in close proximity to the black hole (as close as a few gravitational radii), consistent with expectations for jet launching models that tap either the spin of the central black hole, or the very innermost accretion disk. Our analysis also allows us to place the first constraints on the black hole spin for this source, which we find to be a{sup ∗}>0.92 (99% statistical uncertainty, based on an idealized lamp-post geometry).

79 ASTRONOMY AND ASTROPHYSICS↗

Testing the Kerr Black Hole Hypothesis Using X-Ray Reflection Spectroscopy

We present the first X-ray reflection model for testing the assumption that the metric of astrophysical black holes is described by the Kerr solution. We employ the formalism of the transfer function proposed by Cunningham. The calculations of the reflection spectrum of a thin accretion disk are split into two parts: the calculation of the transfer function and the calculation of the local spectrum at any emission point in the disk. The transfer function only depends on the background metric and takes into account all the relativistic effects (gravitational redshift, Doppler boosting, and light bending). Our code computes the transfer function for a spacetime described by the Johannsen metric and can easily be extended to any stationary, axisymmetric, and asymptotically flat spacetime. Transfer functions and single line shapes in the Kerr metric are compared to those calculated from existing codes to check that we reach the necessary accuracy. We also simulate some observations with NuSTAR and LAD/eXTP and fit the data with our new model to show the potential capabilities of current and future observations to constrain possible deviations from the Kerr metric.

79 ASTRONOMY AND ASTROPHYSICS↗

Pump-probe reflectivity study of ultrafast dynamics of strongly correlated 5f electrons inUO2

5f electrons in the Mott insulator UO{sub 2} produce intriguing electronic states and dynamics, such as strong correlation and f-f excitations. We have performed femtosecond pump-probe reflectivity measurements on a single crystal UO{sub 2} at temperatures 5-300 K to study the ultrafast dynamics of photoexcited 5f electrons. The laser pulses at 400 nm pump 5 f electrons across the Mott gap, while those at 800 nm probe the pump-induced change of reflectivity. We find temperature-dependent excitation and relaxation processes and long-lived acoustic phonons, and extract picosecond risetimes and microsecond relaxation times at low temperatures. The observed slow relaxation is ascribed to the decay of Hubbard excitons formed by U{sup 3+}-U{sup 5+} pairs.

36 MATERIALS SCIENCE↗

Laser damage by ns and sub-ps pulses on hafnia/silica anti-reflection coatings on fused silica double-sided polished using zirconia or ceria and washed with or without an alumina wash step.

Sandia's Large Optics Coating Operation has extensive results of laser induced damage threshold (LIDT) testing of its anti-reflection (AR) and high reflection coatings on substrates pitch polished using ceria and washed in a process that includes an alumina wash step. The purpose of the alumina wash step is to remove residual polishing compound to minimize its role in laser damage. These LIDT tests are for multi longitudinal mode, ns class pulses at 1064 nm and 532 nm (NIF-MEL protocol) and mode locked, sub-ps class pulses at 1054 nm (Sandia measurements), and show reasonably high and adequate laser damage resistance for coatings in the beam trains of Sandia's Z-Backlighter terawatt and petawatt lasers. An AR coating in addition to coatings of our previous reports confirms this with LIDTs of 33.0 J/cm{sup 2} for 3.5 ns pulses and 1.8 J/cm{sup 2} for 350 fs pulses. In this paper, we investigate both ceria and zirconia in doublesided polishing (common for large flat Z-Backlighter laser optics) as they affect LIDTs of an AR coating on fused silica substrates washed with or without the alumina wash step. For these AR coated, double-sided polished surfaces, ceria polishing in general affords better resistance to laser damage than zirconia polishing and laser damage is less likely with the alumina wash step than without it. This is supported by specific results of laser damage tests with 3.5 ns, multi longitudinal mode, single shot pulses at 1064 nm and 532 nm, with 7.0 ns, single and multi longitudinal mode, single and multi shot pulses at 532 nm, and with 350 fs, mode-locked, single shot pulses at 1054 nm.

36 MATERIALS SCIENCE↗

Reflectance Spectroscopy for Sample Identification: Considerations for Quantitative Library Results at Infrared Wavelengths

Reflectance spectroscopy for sample identification has advanced greatly in terms automation by removing the plaguing necessity of sample preparation; automated instruments in the laboratory, in the field and at the process line have made “point and shoot” operation readily accessible, in some instances with standoff detection. For successful identification, however, it is imperative to have reference libraries that are well calibrated not only on the wavelength axis, but on the reflectance axis as well. Ideally, with proper calibration such libraries would be portable to other systems.

calibration↗

Effect of Bioaccumulation of Cs and Sr Natural Isotopes on Foliar Structure and Plant Spectral Reflectance of Indian Mustard (Brassica juncea)

The objectives of this study are: 1.) evaluate the capacity of Indian mustard (Brassica juncea) for uptake and accumulation of Cs and Sr natural isotopes; 2.) identify foliar structural and other physiological changes (biomass, relative water content, etc.) resulting from the accumulation of these two elements; and 3.) monitor Cs and Sr uptake and bioaccumulation process by spectral reflectance. Potted Indian mustard plants were exposed to different concentrations of Cs (50 and 600 ppm) and Sr (50 and 300 ppm) natural isotopes in solution form for 23 days. Bioaccumulation of Cs and Sr was found in the order of leaves > stems > roots for both Cs- and Sr-treated plants. The highest leaf Sr accumulation is observed to be 2708 mg kg{sup -1}, and the highest leaf Cs accumulation is 12251 mg kg{sup -1}. High translocation efficiency for both elements is documented by shoot/root concentration ratios greater than one. Relative water content (RWC) of the plants showed a significant (p < 0.05) decrease in Cs-treated plants. Cs accumulation also affected the pigment concentration and internal structure of the leaf and the spectral characteristics of plants. Within the applied concentration range, Sr accumulation resulted in no significant changes in RWC, structural and spectral characteristics of mustard plants. Cs shoot concentration showed significant negative correlation with relative water content RWC (r = -0.88) and Normalized Difference Vegetation Index (NDVI) (r = -0.68) of plant shoots. The canopy spectral reflectance and NDVI analysis clearly revealed (p < 0.05) the stress caused by Cs accumulation. (authors)

63 RADIATION, THERMAL, AND OTHER ENVIRON. POLLUTAN↗

Polymer Cholesteric-Liquid-Crystal (PCLC) Flake/Fluid Host Electro-Optical Suspensions and Their Applications in Color Flexible Reflective Displays

Polymer cholesteric-liquid-crystal (PCLC) flake/fluid-host suspensions are a novel particle display technology for full-color reflective display applications on rigid or flexible substrates. These “polarizing pigments” require no polarizers or color filters, switch rapidly at very low voltages, and produce highly saturated colors with a reflection efficiency approaching 80%.

36 MATERIALS SCIENCE↗

Doped Multilayer Polymer Cholesteric-Liquid-Crystal (PCLC) Flakes: A Novel Electro-Optical Medium for Highly Reflective Color Flexible Displays

Polymer cholesteric-liquid-crystal (PCLC) flake/fluid-host suspensions are a novel particle display technology for full-color reflective display applications on rigid or flexible substrates. These “polarizing pigments” require no polarizers or color filters, switch rapidly at very low voltages, and produce highly saturated colors with a reflection efficiency approaching 80%.

36 MATERIALS SCIENCE↗

Hydrogen Reflection in Low-Energy Collisions with Amorphous Carbon

Reflection and sticking of hydrogen atoms at amorphous carbon surfaces is studied at impact energies ranging from 0.1 to 50 eV using molecular dynamics simulations. We show that the reflection coefficient at the lowest energies is large and is very sensitive to both the many-body potential used in the simulations and the degree of hydrogen enrichment of the surfaces.

08 HYDROGEN↗

Lateral Beam Shifts and Depolarization Upon Oblique Reflection from Dielectric Mirrors

Abstract Dielectric mirrors comprising thin‐film multilayers are widely used in optical experiments because they can achieve substantially higher reflectance compared to metal mirrors. Here, potential problems are investigated that can arise when dielectric mirrors are used at oblique incidence, in particular for focused beams. It is found that light beams reflected from dielectric mirrors can experience lateral beam shifts, beam‐shape distortion, and depolarization, and these effects have a strong dependence on wavelength, incident angle, and incident polarization. Because vendors of dielectric mirrors typically do not share the particular layer structure of their products, several dielectric‐mirror stacks are designed and simulated, and then the lateral beam shift from two commercial dielectric mirrors and one coated metal mirror is also measured. This paper brings awareness of the tradeoffs between dielectric mirrors and front‐surface metal mirrors in certain optics experiments, and it is suggested that vendors of dielectric mirrors provide information about beam shifts, distortion, and depolarization when their products are used at oblique incidence.

Physics↗

Grazing-Incidence Texture Tomography and Diffuse Reflectivity Tomography of an Organic Semiconductor Device Array

The use of grazing-incidence scattering methods for the characterization of 2D patterned organic thin films is limited due to the elongated 1D footprint of the X-ray beam on the sample. However, this characteristic feature can be turned into an advantage, when combined with tomographic reconstruction. In this pilot study we show, how the use of a chosen texture reflection and a diffuse reflectivity signal can each provide 2D images of the deposits, simultaneously revealing the organic film's crystal orientation and the location of the metal electrodes in a field-effect transistor structure from a single sequence of diffraction images.

36 MATERIALS SCIENCE↗

Growth Dynamics and Electron Reflectivity in Ultrathin Films of Chiral Heptahelicene on Metal (100) Surfaces Studied by Spin-Polarized Low Energy Electron Microscopy

Interaction of electrons with chiral matter gives rise to interesting phenomena such as the chirality-induced spin selectivity. The interdependence of reflectivity of spin-polarized low energy electrons and the absolute handedness of chiral molecules is investigated. First, the growth of homochiral films of helical aromatic hydrocarbons, so-called helicenes, on a Cu(100) surface is studied by means of low energy electron microscopy and scanning tunneling microscopy in ultrahigh vacuum. As soon as the coverage exceeds one monolayer, double-layer nucleation and growth is favored such that depletion in the first layer occurs. Spatially resolved work function measurements show that second-layer patches have a lower work function than first-layer areas. Reflectivity spectra of spin-polarized electrons do not show any asymmetry between homochiral films of the enantiomers. Laterally resolved work function measurements do not confirm work function differences such as those reported earlier for photoelectron studies of chiral peptide films on ferromagnetic substrates.

36 MATERIALS SCIENCE↗

Time dependence of reflected entropy in rational and holographic conformal field theories

We calculate the time dependence of the reflected entropy of two disconnected regions after a global quench in (1 + 1)-dimensional conformal field theories and in large temperature limit. For rational conformal field theories, we find that the time evolution of the reflected entropy is the same as that of the mutual information. We get the same result for holographic theories in the limit where the separation between disconnected regions is much smaller than their respective sizes. We discuss how this result is consistent with the quasi-particle picture of Calabrese and Cardy.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The Markov gap for geometric reflected entropy

The reflected entropy S R (A : B) of a density matrix ρ AB is a bipartite correlation measure lower-bounded by the quantum mutual information I(A : B). In holographic states satisfying the quantum extremal surface formula, where the reflected entropy is related to the area of the entanglement wedge cross-section, there is often an order-N 2 gap between S R and I. We provide an information-theoretic interpretation of this gap by observing that S R - I is related to the fidelity of a particular Markov recovery problem that is impossible in any state whose entanglement wedge cross-section has a nonempty boundary; for this reason, we call the quantity S R - I the Markov gap. We then prove that for time-symmetric states in pure AdS 3 gravity, the Markov gap is universally lower bounded by log(2)ℓ AdS /2G N times the number of endpoints of the cross-section. We provide evidence that this lower bound continues to hold in the presence of bulk matter, and comment on how it might generalize above three bulk dimensions. Finally, we explore the Markov recovery problem controlling S R - I using fixed area states. This analysis involves deriving a formula for the quantum fidelity — in fact, for all the sandwiched Rényi relative entropies — between fixed area states with one versus two fixed areas, which may be of independent interest. We discuss, throughout the paper, connections to the general theory of multipartite entanglement in holography.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Reflected entropy in random tensor networks. Part III. Triway cuts

For general random tensor network states at large bond dimension, we prove that the integer Rényi reflected entropies (away from phase transitions) are determined by minimal triway cuts through the network. This generalizes the minimal cut description of bipartite entanglement for these states. A natural extrapolation away from integer Rényi parameters, suggested by the triway cut problem, implies the holographic conjecture S R = 2EW, where S R is the reflected entropy and EW is the entanglement wedge cross-section. Minimal triway cuts can be formulated as integer programs which cannot be relaxed to find a dual maximal flow/bit-thread description. This sheds light on the gap between the existence of tripartite entanglement in holographic states and the bipartite entanglement structure motivated by bit-threads. In particular, we prove that the Markov gap that measures tripartite entanglement is lower bounded by the integrality gap of the integer program that computes the triway cut.

AdS-CFT correspondence↗

Fabrication and performance of polymer-nanocomposite anti-reflective thin films deposited by RIR-MAPLE

Design of polymer anti-reflective (AR) optical coatings for plastic substrates is challenging because polymers exhibit a relatively narrow range of refractive indices. Here, we report synthesis of a four-layer AR stack using hybrid polymer: nanoparticle materials deposited by resonant infrared matrix-assisted pulsed laser evaporation. An Er: YAG laser ablated frozen solutions of a high-index composite containing TiO2 nanoparticles and poly(methylmethacrylate) (PMMA), alternating with a layer of PMMA. The optimized AR coatings, with thicknesses calculated using commercial software, yielded a coating for polycarbonate with transmission over 97 %, scattering <3 %, and a reflection coefficient below 0.5 % across the visible range, with a much smaller number of layers than would be predicted by a standard thin film calculation. The TiO2 nanoparticles contribute more to the enhanced refractive index of the high-index layers than can be accounted for by an effective medium model of the nanocomposite.

Singaravelu, S.↗