Search NASA⌕ Search

SEARCH · Search NASA

Results for “Reactor Kinetics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

Energy Literacy Essential Principle #1

Energy Literacy Essential Principle #1: Energy is a physical quantity that follows precise natural laws.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Comparison of gasification kinetics parameters of different types of nuclear graphite

A chemical-reaction kinetics model of nuclear graphite gasification has recently been developed and successfully validated with gasification rate measurements for nuclear graphite grades of IG-110, IG-430, NBG-18 and NBG-25. The model employs 4 elementary chemical reactions with applicable parameters, including the values and Gaussian-like distributions of the specific activation energies, the pre-exponential coefficients for adsorption of oxygen and desorption of CO and CO{sub 2} gases, and the surface area of free active sites. These parameters are determined from the reported measurements of the total gasification and transient weight loss using a multi-parameter optimization algorithm. The determined chemical kinetics parameters for IG-100 and NB-25 are nearly the same, but slightly different from those for NBG-18 and IG-430. The initial specific area of free active sites is inversely proportional to the square root of the mass or volume of the graphite specimens used in experiments. The recommended chemical kinetics parameters in this paper for these grades of nuclear graphite should be applicable to future safety analysis of high-temperature gas cooled reactors in the unlikely event of a massive air ingress accident. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

General purpose dynamic Monte Carlo with continuous energy for transient analysis

For safety assessments transient analysis is an important tool. It can predict maximum temperatures during regular reactor operation or during an accident scenario. Despite the fact that this kind of analysis is very important, the state of the art still uses rather crude methods, like diffusion theory and point-kinetics. For reference calculations it is preferable to use the Monte Carlo method. In this paper the dynamic Monte Carlo method is implemented in the general purpose Monte Carlo code Tripoli4. Also, the method is extended for use with continuous energy. The first results of Dynamic Tripoli demonstrate that this kind of calculation is indeed accurate and the results are achieved in a reasonable amount of time. With the method implemented in Tripoli it is now possible to do an exact transient calculation in arbitrary geometry. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Accident analysis of heavy water cooled thorium breeder reactor

Thorium has lately attracted considerable attention because it is accumulating as a by-product of large scale rare earth mining. The objective of research is to analyze transient behavior of a heavy water cooled thorium breeder that is designed by Tokai University and Tokyo Institute of Technology. That is oxide fueled, PWR type reactor with heavy water as primary coolant. An example of the optimized core has relatively small moderator to fuel volume ratio (MFR) of 0.6 and the characteristics of the core are burn-up of 67 GWd/t, breeding ratio of 1.08, burn-up reactivity loss during cycles of < 0.2% dk/k, and negative coolant reactivity coefficient. One of the nuclear reactor accidents types examined here is Unprotected Transient over Power (UTOP) due to withdrawing of the control rod that result in the positive reactivity insertion so that the reactor power will increase rapidly. Another accident type is Unprotected Loss of Flow (ULOF) that caused by failure of coolant pumps. To analyze the reactor accidents, neutron distribution calculation in the nuclear reactor is the most important factor. The best expression for the neutron distribution is the Boltzmann transport equation. However, solving this equation is very difficult so that the space-time diffusion equation is commonly used. Usually, space-time diffusion equation is solved by employing a point kinetics approach. However, this approach is less accurate for a spatially heterogeneous nuclear reactor and the nuclear reactor with quite large reactivity input. Direct method is therefore used to solve space-time diffusion equation which consider spatial factor in detail during nuclear reactor accident simulation. Set of equations that obtained from full implicit finite-difference method is solved by using iterative methods. The indication of UTOP accident is decreasing macroscopic absorption cross-section that results large external reactivity, and ULOF accident is indicated by decreasing coolant flow. The power reactor has a peak value before reactor has new balance condition. The analysis showed that temperatures of fuel and claddings during accident are still below limitations which are in secure condition.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Advances in process intensification through multifunctional reactor engineering

This project was designed to advance the art of process intensification leading to a new generation of multifunctional chemical reactors. Experimental testing was performed in order to fully characterize the hydrodynamic operating regimes critical to process intensification and implementation in commercial applications. Physics of the heat and mass transfer and chemical kinetics and how these processes are ultimately scaled were investigated. Specifically, we progressed the knowledge and tools required to scale a multifunctional reactor for acid-catalyzed C4 paraffin/olefin alkylation to industrial dimensions. Understanding such process intensification strategies is crucial to improving the energy efficiency and profitability of multifunctional reactors, resulting in a projected energy savings of 100 trillion BTU/yr by 2020 and a substantial reduction in the accompanying emissions.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Quantifying transport and electrocatalytic reaction processes in a gastight rotating cylinder electrode reactor via integration of Computational Fluid Dynamics modeling and experiments

Understanding the complexity of the multiple processes of mass, momentum, charge, and heat transport, and how these affect reaction kinetics at the electrode/electrolyte interface is one of the major challenges in the field of energy and catalysis. The rapid and rational scale-up of electrocatalytic systems to industrial scales require a detailed understanding of nonlinear transport-reaction processes, accessible only through the building of multi-physics models that capture with high fidelity the complexity of real-world devices. The gastight rotating cylinder electrode (RCE) reactor is a promising lab-scale tool that can decouple transport from intrinsic kinetics to generate data for first-principle models useful in the design of industrial, electrochemical reactors. Computational Fluid Dynamics (CFD) studies have previously been used to investigate the bulk flow in RCE reactors for simple corrosion and electroplating processes. However, the quantification of changes in local concentration within the viscous layer where catalysis takes place requires capturing the correct flow conditions inside the hydrodynamic boundary layer near the surface of the electrode. Further, this requires simulations with spatial resolution in the nm and μm scale and temporal resolutions between ms and s scales that are similar to the timescales for reactions on the electrode surface. In this study, experimental electrocatalysis is combined with CFD modeling to elucidate and parameterize the hydrodynamics in a gastight RCE reactor. CFD simulations of the electrochemical ferricyanide reduction reaction under mass transport limited conditions are used to evaluate the validity of the CFD model parameters by comparing calculated dimensionless mass transport descriptors to dimensionless correlations obtained experimentally. Justifications for assumptions and details of the simulation methods used in this study are presented to provide a detailed understanding of the effect that each model parameter has on the ability to accurately simulate electrocatalysis in RCE systems. The simulation methodology reported here is a first step towards the development of multi-scale models for the study of transport dependent electrocatalytic processes, such as the electrochemical transformation of CO 2 to fuels and chemicals.

42 ENGINEERING↗

Applying Technology and Experience to Ensure Safe In Situ Decommissioning - 19587

Permanent entombment of a radioactively contaminated facility as a decommissioning option (In Situ Decommissioning, ISD) has been completed for DOE facilities at the Savannah River Site (P and Reactors, HWCTR reactor), Hanford (U Canyon) and Idaho (CP-601/604),and is currently being considered for implementation at a limited number of selected DOE facilities as well as for the NPD and WR-1 reactors in Canada and various facilities in the United Kingdom. A general description of an ISD project encompasses an entombed facility which in some cases is limited to just the below-grade portion of a facility with the above-ground portion being decommissioned, packaged and disposed in a conventional manner. The entombed portions of the facility are of robust construction, generally of reinforced concrete exterior, that provides a migration barrier between internal contamination and the environment with significant internal void spaces backfilled or grouted. The scope of entombment may include ancillary equipment and structures and may contain radioactive and hazardous materials and contamination within the facility and waste imported from outside the facility. ISD is most often a permanent decommissioning end-state although in some instances (e.g. the U.K.) there may be a need to revisit the ISD facility after 300 years to effect traditional decommissioning. The defined completion (the end-state) of the decommissioned facility is therefore project-specific and in conformance with environmental approval processes and planned future activities. In all cases however, the final condition is passive, meaning that there are no requirements for ongoing operational systems or equipment within the decommissioned facility. ISD projects in the USA are presumed to be under indefinite institutional control of the U.S. Government. The regulatory framework in the U.S. is currently in place to provide assurance that the risk posed by an ISD facility is within regulatory acceptance criteria. (The framework in the U.K. and Canada is evolving towards that in the USA). Special emphasis is placed on the fact that an entombed facility is not considered a waste disposal facility; rather it is a decommissioning end-state option. ISD does not eliminate the need for effective and careful management of contaminated materials and structures, nor does it serve to abandon contaminated buildings in place. Further, ISD is safe and cost-effective for a relatively small number of facilities across the DOE Complex. This paper explores the current programmatic considerations and technical aspects of the ISD process and discuss the measures taken to ensure that an 'entombed' facility is safe for both site workers and the general population. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Reduced-order condensed-phase kinetic models for polyethylene, polypropylene and polystyrene thermochemical recycling

Thermochemical recycling of plastic waste (PW) into chemicals and energy vectors requires coupling particle and reactor-scale simulations to accurate condensed phase pyrolysis mechanisms for each constituent. This work proposes a methodology to derive reduced-order condensed-phase kinetic models from validated semi-detailed kinetic mechanisms. Two types of kinetic models are obtained for polyethylene (PE), polypropylene (PP) and polystyrene (PS): reduced semi-detailed models and multi-step fully lumped ones. These families offer different compromises between accuracy and computational cost. The former employ 50–100 gas + liquid species and describe both the radical degradation and the detailed carbon distribution of the products. Conversely, the latter involves 5–10 species per polymer tracking only the main petroleum cuts. The kinetic mechanisms are complemented by the definition of thermochemical properties of gas, liquid, and solid-phase species, accounting for phase-transitions through pseudo-chemical reactions. Model validations are performed by comparison with experimental data and the original semi-detailed mechanisms in terms of mass loss, heat fluxes and product distribution profiles. The resulting CHEMKIN-like condensed-phase models are attached as Supplementary Material and as a GitHub repository. Extending the proposed approach to other polymers and coupling it with existing subsets in the CRECK kinetic framework (e.g., biomass, PVC, PET) offers a powerful tool to model thermochemical recycling of PW and biomass/PW mixtures.

kinetics↗

Reduced chemistry model calibration using unsteady flames with repetitive extinction and ignition

In this paper, combustion in a narrow channel with an imposed temperature gradient is used to calibrate a reduced chemical mechanism. The focus is placed on unsteady flames with repetitive extinction and ignition (FREI) at high pressure. The reduced mechanism follows a hybrid approach, combining a small fuel-dependent submechanism with a detailed fuel-independent submechanism for the core species chemistry. The fuel-dependent submechanism consists of three species and nine reactions describing both the low and high-temperature fuel decomposition pathways. The sensitivity of the extinction and ignition locations to the fuel-dependent reactions is assessed and multiple reactions are found to affect the FREI behavior. The sensitive reactions are calibrated following a Bayesian approach. The calibrated reduced model is compared to a detailed model and good agreement in ignition delay times and laminar flame speeds is observed. Finally, this illustrates the potential of a micro flow reactor with a controlled temperature profile to test fuels, calibrate chemical models, and infer kinetic data.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Experimental and Kinetic Modeling Study of 3-Methyl-2-butenol (Prenol) Oxidation

Longer chain alcohols with 4–5 carbon atoms are attractive alternative fuels as they can be derived from biological sources and since their combustion leads to lower exhaust gas levels of NO x and soot compared to commercial fossil fuels. The auto-ignition behavior of fuels that contain both a hydroxyl group and a C=C double bond in their molecular structure is not well established in the literature. Understanding the influence of these functional groups on the ignition behavior of fuels is critical in the development of tailor-made fuels for advanced combustion engines. In this study, ignition delay times of an unsaturated alcohol, 3-methyl-2-butenol (prenol), are measured using a high-pressure shock tube and a rapid compression machine at pressures of 15 and 30 bar at equivalence ratios of 0.5, 1.0, and 2.0 in “air” in the temperature range 600–1400 K. Furthermore, a detailed kinetic model is developed and validated using the new experimental data in this study. In addition, speciation data in a jet-stirred reactor, ignition delay times, and laminar burning velocities available in the literature were also used to validate the new kinetic model. Fuel flux and sensitivity analyses are performed using this new model to determine the important fuel consumption pathways and critical reactions that affect the reactivity of prenol.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Neutron and gamma field investigations in the VVER-1000 mock-up concrete shielding on the reactor LR-0

Two sets of neutron and gamma field investigations were carried out in the dismountable model of radiation shielding of the VVER-1000 mock-up on the LR-0 reactor. First, measurements and calculations of the {sup 3}He(n,p)T reaction rate and fast neutrons and gamma flux spectra in the operational neutron monitor channel inside a concrete shielding for different shapes and locations of the channel (cylindrical channel in a concrete, channels with collimator in a concrete, cylindrical channel in a graphite). In all cases measurements and calculations of the {sup 3}He(n,p)T reaction rate were done with and without an additional moderator-polyethylene insert inside the channel. Second, measurements and calculations of the {sup 3}He(n,p)T reaction rate spatial distribution inside a concrete. The {sup 3}He(n,p)T reaction rate measurements and calculations were carried out exploring the relative thermal neutron density in the channels and its space distribution in the concrete. Fast neutrons and gamma measurements were carried out with a stilbene (45 x 45 mm) scintillation spectrometer in the energy regions 0.5-10 MeV (neutrons) and 0.2-10 MeV (gammas). (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Organic and nitrogen removal from landfill leachate in aerobic granular sludge sequencing batch reactors

Highlights: Black-Right-Pointing-Pointer Aerobic granular sludge SBR was used to treat real landfill leachate. Black-Right-Pointing-Pointer COD removal was analyzed kinetically using a modified model. Black-Right-Pointing-Pointer Characteristics of nitrogen removal at different ammonium inputs were explored. Black-Right-Pointing-Pointer DO variations were consistent with the GSBR performances at low ammonium inputs. - Abstract: Granule sequencing batch reactors (GSBR) were established for landfill leachate treatment, and the COD removal was analyzed kinetically using a modified model. Results showed that COD removal rate decreased as influent ammonium concentration increasing. Characteristics of nitrogen removal at different influent ammonium levels were also studied. When the ammonium concentration in the landfill leachate was 366 mg L{sup -1}, the dominant nitrogen removal process in the GSBR was simultaneous nitrification and denitrification (SND). Under the ammonium concentration of 788 mg L{sup -1}, nitrite accumulation occurred and the accumulated nitrite was reduced to nitrogen gas by the shortcut denitrification process. When the influent ammonium increased to a higher level of 1105 mg L{sup -1}, accumulation of nitrite and nitrate lasted in the whole cycle, and the removal efficiencies of total nitrogen and ammonium decreased to only 35.0% and 39.3%, respectively. Results also showed that DO was a useful process controlling parameter for the organics and nitrogen removal at low ammonium input.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Unraveling the Pyrolytic Behavior and Kinetics of Single Polymers and Plastic-Rich Municipal Solid Waste Using Thermal Analysis

Pyrolysis is a highly promising thermochemical recycling technology for converting heterogenous plastic waste into sustainable fuels in a single step. Therefore, understanding the pyrolysis mechanism is essential for enabling rational reactor design and enhancing efficient recycling techniques. In this study, the thermal degradation behaviors and corresponding kinetics of pure polymers (PE, PP, and PET) and plastic-rich MSW were examined using simultaneous thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). Experiments were carried out in the temperature range of 30-800°C with variable heating rates from 5°C/min to 20°C/min in an ultra-high purity Argon atmosphere. Our results indicated that the plastic pyrolysis was an endothermic process, with varying decomposition temperature ranges depending on their structure and composition. Various iso-conversional model-free methods (Friedman, Flynn-Wall-Ozawa, Starink, and Kissinger-Akahira-Sunose) were utilized to determine the apparent activation energy of the plastic degradation, which increased in the following order: PET (214 kJ/mol), PP (218 kJ/mol), PE (245 kJ/mol), and MSW (249 kJ/mol). Finally, Criado’s master plots were employed to identify the best-fitting reaction model and the pre-exponential factor was subsequently determined.

Bashir, Muhammad Aamir↗

Graphite oxidation modeling for application in MELCOR.

The Arrhenius parameters for graphite oxidation in air are reviewed and compared. One-dimensional models of graphite oxidation coupled with mass transfer of oxidant are presented in dimensionless form for rectangular and spherical geometries. A single dimensionless group is shown to encapsulate the coupled phenomena, and is used to determine the effective reaction rate when mass transfer can impede the oxidation process. For integer reaction order kinetics, analytical expressions are presented for the effective reaction rate. For noninteger reaction orders, a numerical solution is developed and compared to data for oxidation of a graphite sphere in air. Very good agreement is obtained with the data without any adjustable parameters. An analytical model for surface burn-off is also presented, and results from the model are within an order of magnitude of the measurements of burn-off in air and in steam.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

An experimental and kinetic modeling study of cyclopentane and dimethyl ether blends

Cyclopentane is a suitable naphthene, or cycloalkane, in a palette for multi-component gasoline surrogate fuels due to its presence in market fuels and its relevance to alkyl substituted cyclopentanes also present. However, the previous oxidation studies of cyclopentane have primarily focused on neat mixtures. Blending cyclopentane with dimethyl ether in this work therefore serves to inform our understanding of, and improve predictive models for, multi-component mixtures. Here, the auto-ignition of cyclopentane/dimethyl ether blends was studied in a high-pressure shock tube and in a rapid compression machine. A wide range of temperatures (650 – 1350 K) and elevated pressures of 20 and 40 bar were studied at equivalence ratios of 0.5, 1.0 and 2.0 in air for two blending ratios (30/70 and 70/30 mole% cyclopentane/di-methyl ether mixtures). A detailed kinetic model for cyclopentane was revised to capture the measured ignition delay times and apparent heat release rates in this study. Literature ignition delay time, jet-stirred reactor, and laminar burning velocity measurements of neat cyclopentane were used as additional validation. Improvements to the kinetic model were based on recent literature studies related to sub-models including cyclopentene and cyclopentadiene which allowed the removal of previous local rate-constant optimizations. Low temperature reactivity of cyclopentane was found to be controlled by the branching ratio between concerted elimination of HO͘ 2 and the strained formation of Q&#775OOH radicals in agreement with previous studies. In this study, the low branching ratio of Q&#775OOH formation increases the influence of a competing consumption pathway for cyclopentyl-peroxy (CPTO͘ 2 J) radicals. The sensitivity of the simulated ignition delay times to the formation of cyclopentyl hydroperoxide (CPTO 2 H), from CPTO͘ 2 J and HO͘ 2 , is discussed. The current model is used to analyze the influence of dimethyl ether on the reactivity of cyclopentane in the context of previous literature studies of dimethyl ether binary blends with ethanol and toluene.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Preparation of Diffusion Couples for Irradiation and High Temperature Testing of Representative TRISO PyC/SiC

Understanding the release of fission products from intact tristructural-isotropic (TRISO) coated particle fuel during normal and off-normal service is necessary to ensuring safe and efficient reactor operation. Planar diffusion couples have been fabricated to determine the diffusion kinetics of select fission product species (Ag, Ag+Pd, Eu, and Sr) in pyrocarbon (PyC) and silicon carbide (SiC) materials which are representative of TRISO fuel. Obtaining accurate diffusion coefficients for these systems in representative materials will allow for higher fidelity inputs for fuel performance models. Three different diffusion couple variants have been produced which include a Baseline, PyC, and SiC variant. The Baseline variant serves as an example of representative PyC and SiC layers as the layer properties mimic those found in TRISO fuel from the second Advanced Gas Reactor Fuel Qualification and Development Program. The PyC and SiC variants include variation in the respective layer properties to understand the impact of PyC density and SiC grain size on fission product diffusion. The diffusion couples were designed to allow for exploration of neutron irradiation on diffusion reflecting in reactor behavior as well as high temperature thermal diffusion reflecting diffusive transport during off-normal conditions. The methodology for selecting the diffusion couple design, refinement of the individual variant layer properties, and the complete process for diffusion couple construction are summarized in this report.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Studies of NO-char reaction kinetics obtained from drop-tube furnace and thermogravimetric experiments

Four coal chars were prepared in a flat flame flow reactor (FFR), which can simulate the temperature and gas composition of a real pulverized coal combustion environment. The pore structure of chars was measured by mercury porosimetry and nitrogen adsorption, and the Hg and Brunauer-Emmett-Teller (BET) surface areas were obtained. The kinetics of NO-char was studied in a drop-tube furnace (DTF) and thermogravimetric analyzer (TGA). In the TGA experiments, the random pore model (RPM) was applied to describe the NO-char reactions and obtain the intrinsic kinetics. By presenting the data of DTF and TGA experiments on the same Arrhenius plot, it can be concluded that TGA is an available tool to study the kinetics of a high-temperature NO-char reaction. With respect to the DTF experiments, in comparison to the BET surface area, the Hg surface area is a better basis for normalizing the reactivity of different coal chars because of less scatter in the measured values, better agreement with TGA experimental data, and more stable values during the process of reaction. Moreover, by comparing the Hg surface area of chars before and after reactions, it is believed that the Hg surface area basis is more appropriate for high-rank coal chars. The determined kinetic rate constants are in good agreement with other data in the literature, and a new rate constant expression is proposed. 30 refs., 8 figs., 7 tabs.

01 COAL, LIGNITE, AND PEAT↗