Search NASA⌕ Search

SEARCH · Search NASA

Results for “SIMPLE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

A simple test for the interlaminar fracture toughness of composites

A simple test method for the measurement of delamination resistance is assessed through its application to 11-ply graphite-epoxy laminates whose matrices employ the F185 and 205 resins. The F185 resin has the same base epoxy as the 205, to which liquid and solid elastomers have been added. The critical value of the mixed mode energy release rate, calculated from a closed form equation employing nominal strain measurements from the onset of edge delamination, show that addition of the elastomers to the base epoxy increases interlaminar fracture toughness. Comparison of these results with those of width-tapered double cantilever beam (WTDCB) test data for the two materials shows a similar strain energy release rate, establishing the accuracy of the novel method. Both tests are found to be needed, however, for the quantitative characterization of interlaminar fracture toughness.

Obrien, T. K.↗

Sensitivity of the boundary layer energy fluxes to forcing parameters in a simple climate model

Winter and summer surface temperatures and time-averaged boundary layer energy fluxes are calculated by utilizing the Saltzman-Ashe parameterization for boundary layer fluxes in a two-level static model. The results are found to agree with observed patterns. Within the framework of this simple model, sensitivity analyses of the time-averaged boundary layer energy fluxes are conducted. Based on these results some of the forcing parameters (such as the subsurface temperature, cloud cover, surface albedo, etc.) are arranged in a hierarchical order of importance. A generalized method of sensitivity analysis is also suggested.

Rao, M. S.↗

Three-dimensional flows about simple components at angle of attack

The structures of three dimensional separated flow about some chosen aerodynamic components at angle of attack are synthesized, holding strictly to the notion that streamlines in the external flow (viscous plus inviscid) and skin friction lines on the body surface may be considered as trajectories having properties consistent with those of continuous vector fields. Singular points in the fields are of limited number and are classified as simple nodes and saddles. Analogous flow structures at high angles of attack about blunt and pointed bodies, straight and swept wings, etc., are discussed, highlighting the formation of spiral nodes (foci) in the pattern of the skin friction lines. How local and global three dimensional separation lines originate and form is addressed, and the characteristics of both symmetric and asymmetric leeward wakes are described.

Peake, D. J.↗

A simple propulsion system model for the simulation of nonlinear dynamic thrust response

A simple mathematical jet engine description is presented where the measured transition functions of the engine thrust can be simulated in a quasi-stationary operation as well as in acceleration or deceleration schedules. Because of its simplicity and high fidelity, it is especially suited for representing jet engines in digital simulation programs.

Schaenzer, G.↗

Detection and recognition of simple spatial forms

A model of human visual sensitivity to spatial patterns is constructed. The model predicts the visibility and discriminability of arbitrary two-dimensional monochrome images. The image is analyzed by a large array of linear feature sensors, which differ in spatial frequency, phase, orientation, and position in the visual field. All sensors have one octave frequency bandwidths, and increase in size linearly with eccentricity. Sensor responses are processed by an ideal Bayesian classifier, subject to uncertainty. The performance of the model is compared to that of the human observer in detecting and discriminating some simple images.

Watson, A. B.↗

A simple model for the estimation of rain-induced attenuation along earth-space paths at millimeter wavelengths

A simple attenuation model (SAM) is presented for estimating rain-induced attenuation along an earth-space path. The rain model uses an effective spatial rain distribution which is uniform for low rain rates and which has an exponentially shaped horizontal rain profile for high rain rates. When compared to other models, the SAM performed well in the important region of low percentages of time, and had the lowest percent standard deviation of all percent time values tested.

Stutzman, W. L.↗

Simple phenomenological modeling of transition-region capacitance of forward-biased p-n junction diodes and transistor diodes

The derivation of a simple expression for the capacitance C(V) associated with the transition region of a p-n junction under a forward bias is derived by phenomenological reasoning. The treatment of C(V) is based on the conventional Shockley equations, and simpler expressions for C(V) result that are in general accord with the previous analytical and numerical results. C(V) consists of two components resulting from changes in majority carrier concentration and from free hole and electron accumulation in the space-charge region. The space-charge region is conceived as the intrinsic region of an n-i-p structure for a space-charge region markedly wider than the extrinsic Debye lengths at its edges. This region is excited in the sense that the forward bias creates hole and electron densities orders of magnitude larger than those in equilibrium. The recent Shirts-Gordon (1979) modeling of the space-charge region using a dielectric response function is contrasted with the more conventional Schottky-Shockley modeling.

Lindholm, F. A.↗

A proposed simple and safe aircraft take-off or landing procedure with wing roughness or protuberances

A simple, safe takeoff and/or landing procedure has been developed for cases of wing roughness or proturbances. The procedure utilizes calculations of aerodynamic penalties and steady flight equations. Empirical relationships for lift, drag, and angle of attack penalties are used to construct the lift and drag coefficient versus the angle of attack. To maintain safe stall margin due to wing roughness, the lift coefficient and the angle of attack at takeoff or landing for a roughened aircraft must be less than that of a clean aircraft by the relative maximum lift loss and stall angle loss due to roughness. The procedure may be applied to many types of aircraft.

Dietenberger, M. A.↗

A simple theoretical model for calculating and parameterizing the ionospheric photoelectron flux

A method for calculating the ionospheric photoelectron flux is developed which uses the concept of average electron energy loss to simplify the calculation of the degraded electron spectrum. This method requires only a knowledge of the total inelastic electron impact cross sections and can be used for the calculation of all secondary ion and excited state production rates. The simple calculation reduces the computing time by a factor of 10 and considerably reduces storage requirements. It is found that the ionospheric photoelectron flux in the local equilibrium region is directly proportional to the attenuated solar EUV flux, which is a function only of the total neutral column density, and is independent of the neutral density composition. Thus, it is shown that electron impact cross section can be chosen so that this method may also be used to parameterize the measured ionospheric photoelectron fluxes.

Richards, P. G.↗

A simple model of space radiation damage in GaAs solar cells

A simple model is derived for the radiation damage of shallow junction gallium arsenide (GaAs) solar cells. Reasonable agreement is found between the model and specific experimental studies of radiation effects with electron and proton beams. In particular, the extreme sensitivity of the cell to protons stopping near the cell junction is predicted by the model. The equivalent fluence concept is of questionable validity for monoenergetic proton beams. Angular factors are quite important in establishing the cell sensitivity to incident particle types and energies. A fluence of isotropic incidence 1 MeV electrons (assuming infinite backing) is equivalent to four times the fluence of normal incidence 1 MeV electrons. Spectral factors common to the space radiations are considered, and cover glass thickness required to minimize the initial damage for a typical cell configuration is calculated. Rough equivalence between the geosynchronous environment and an equivalent 1 MeV electron fluence (normal incidence) is established.

Wilson, J. W.↗

Experimental determination of gap flow-conditioned forces at turbine stages and their effect on the running stability of simple rotors

Instabilities in turbine operation can be caused by forces which are produced in connection with motions involving the oil film in the bearings. An experimental investigation regarding the characteristics of such forces in the case of three typical steam turbine stages is conducted, taking into account the effect of various parameters. Supplementary kinetic tests are carried out to obtain an estimate of the flow forces which are proportional to the velocity. The measurements are based on the theoretical study of the damping characteristics of a vibrational model. A computational analysis of the effect of the measured fluid forces on the stability characteristics of simple rotor model is also conducted.

Wohlrab, R.↗

The use of a formal simulator to verify a simple real time control program

The authors present an initial and elementary investigation of the formal specification and mechanical verification of programs that interact with environments. They describe a mechanical proof that a simple, real time control program keeps a vehicle on a straightline course in a variable crosswind. To formalize the specification they define a mathematical function which models the interaction of the program and its environment. They then state and proved two theorems about this function: the simulated vehicle never gets farther than three units away from the intended course, and it comes to the course if the wind ever remains steady for at least four sampling units.

Boyer, R. S.↗

A simple rectangular element for 2-dimensional analysis of laminated composites

A simple rectangular finite element was developed for two dimensional analysis of laminated composite materials. The rectangular laminated composite element eliminates the need to add elements to a model simply to account for the material properties of various laminae. This is particularly advantageous for thick laminates with many lamina. Explicit integration in terms of generalized displacements minimizes the algebraic effort required to derive the element stiffness and the thermal load vector. A substitute shape function technique is used to improve the performance of the element in modeling bending type deformation. Results for several example problems are discussed.

Whitcomb, J. D.↗

Simple high-temperature thermal diffusivity apparatus

A simple and inexpensive thermal diffusivity apparatus is described for measurement up to 1600 K. The novel features of apparatus include a light pipe, a long furnace, and a differential thermocouple. A low heat-load sample holder for clamping the sample in a vertical position is also described. The results of measurements on AXM-5Q graphite are reported.

Wood, C.↗

Simple descriptor for contextual classification of hyperdimensional remotely sensed spectral data

An extended CIE transformation was employed to deal with data reduction problems of hyperdimensional spectral data for NASA airborne and Shuttle imaging spectrometers. A simple descriptor was found to be very effective in analyzing spectral data covers from 0.4 to 2.4 microns. Results reveal contextual properties of minerals, vegetation, and crops. It provides a means to monitor seasonal growth variations for crops. It can also serve as pseudocolor indexing for imaging spectrometer imagery extended beyond the visible range.

Chiou, W. C.↗

A simple expression for kilometric radiation growth rates and analytical applications

A simple expression is derived for the linear growth rate of R-X mode, auroral kilometric radiation under the assumptions of cold plasma wave dispersion and (omega sub pe)-squared is much less than (Omega sub e)-squared, where omega sub pe and Omega sub e are the electron plasma frequency and gyrofrequency, respectively. The result is valid for all wave normal angles and all frequencies above the right-hand cutoff frequency. With this expression, it is not necessary to evaluate the full dispersion tensor, and variations of the growth rate with plasma parameters are easily obtained. Applying the new expression, it is found that kilometric radiation growth rates are strongly dependent upon the magnitude of the magnetic field-aligned potential difference, and that significant growth of radiation at harmonics of the fundamental is unlikely in regions where (omega sub pe)-squared is much less than (Omega sub e)-squared.

Lyons, L. R.↗

Appearance of gauge structure in simple dynamical systems

By generalizing a construction of Berry and Simon, it is shown that non-Abelian gauge fields arise in the adiabatic development of simple quantum mechanical systems. Characteristics of the gauge fields are related to energy splittings, which may be observable in real systems. Similar phenomena are found for suitable classical systems.

Wilczek, F.↗