SEARCH · Search NASA

Results for “SULFURIC ACID”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

All sources NASA NTRS DOE OSTI

NASA NTRS2013

Ion Exchange Technology Development in Support of the Urine Processor Assembly

The urine processor assembly (UPA) on the International Space Station (ISS) recovers water from urine via a vacuum distillation process. The distillation occurs in a rotating distillation assembly (DA) where the urine is heated and subjected to sub-ambient pressure. As water is removed, the original organics, salts, and minerals in the urine become more concentrated and result in urine brine. Eventually, water removal will concentrate the urine brine to super saturation of individual constituents, and precipitation occurs. Under typical UPA DA operating conditions, calcium sulfate or gypsum is the first chemical to precipitate in substantial quantity. During preflight testing with ground urine, the UPA achieved 85% water recovery without precipitation. However, on ISS, it is possible that crewmember urine can be significantly more concentrated relative to urine from ground donors. As a result, gypsum precipitated in the DA when operating at water recovery rates at or near 85%, causing the failure and subsequent re14 NASA Tech Briefs, September 2013 placement of the DA. Later investigations have demonstrated that an excess of calcium and sulfate will cause precipitation at water recovery rates greater than 70%. The source of the excess calcium is likely physiological in nature, via crewmembers' bone loss, while the excess sulfate is primarily due to the sulfuric acid component of the urine pretreatment. To prevent gypsum precipitation in the UPA, the Precipitation Prevention Project (PPP) team has focused on removing the calcium ion from pretreated urine, using ion exchange resins as calcium removal agents. The selectivity and effectiveness of ion exchange resins are determined by such factors as the mobility of the liquid phase through the polymer matrix, the density of functional groups, type of functional groups bound to the matrix, and the chemical characteristics of the liquid phase (pH, oxidation potential, and ionic strength). Previous experience with ion exchange resins has demonstrated that the most effective implementation for an ion exchange resin is a cartridge, or column, in which the resin is contained. Based on the results of equilibrium and sub-scale dynamic column testing, a possible solution for mitigating the calcium precipitation issue on the ISS has been identified. From an original pool of 13 ion exchange resins, two candidates have been identified that demonstrate substantial calcium removal on the sub-scale. The dramatic reduction in resin performance from published calcium uptake demonstrates the need for thorough evaluation of resins at the low pH and strong oxidizing environment present in the UPA. Chemical variations in the influent (calcium concentrations and pretreatment dosing) appear to have a noticeable impact on the calcium capacity of the resin. Low calcium concentrations and high pretreatment dosing will likely result in a decrease in calcium capacity. Conversely, low pre trea t - ment dosing will likely result in an increase in calcium capacity. In contrast, investigations at a variety of flow rates, length-to-diameter ratios, resin volumes, and flow regimes (continuous versus pulsed) show that changes in physical parameters do not have substantial impacts on resin performance in the very low specific velocity ranges of interest. This result is particularly useful because most commercial applications at higher specific velocities do show a relatively strong relationship between flow and capacity. The lack of a strong relationship will allow more flexibility in the implementation of an ion exchange bed for flight. Verification of subscale tests with flight-scale resin beds is recommended prior to implementation in the on-orbit UPA.

Mitchell, Julie↗

NASA NTRS2009

High Temperature Piezoelectric Drill

The current NASA Decadal mission planning effort has identified Venus as a significant scientific target for a surface in-situ sampling/analyzing mission. The Venus environment represents several extremes including high temperature (460 deg C), high pressure (~9 MPa), and potentially corrosive (condensed sulfuric acid droplets that adhere to surfaces during entry) environments. This technology challenge requires new rock sampling tools for these extreme conditions. Piezoelectric materials can potentially operate over a wide temperature range. Single crystals, like LiNbO3, have a Curie temperature that is higher than 1000 deg C and the piezoelectric ceramics Bismuth Titanate higher than 600 deg C. A study of the feasibility of producing piezoelectric drills that can operate in the temperature range up to 500 deg C was conducted. The study includes the high temperature properties investigations of engineering materials and piezoelectric ceramics with different formulas and doping. The drilling performances of a prototype Ultrasonic/Sonic Drill/Corer (USDC) using high temperate piezoelectric ceramics and single crystal were tested at temperature up to 500 deg C. The detailed results of our study and a discussion of the future work on performance improvements are presented in this paper.

rock sampling↗

NASA NTRS2008

Second Generation Prototype Design and Testing for a High Altitude Venus Balloon

This paper describes the development of a second generation prototype balloon intended for flight in the upper atmosphere of Venus. The design of this new prototype incorporates lessons learned from the construction and testing of the first generation prototype, including finite element analyses of the balloon stresses and deformations, measured leak performance after handling and packaging, permeability and optical property measurements on material samples, and sulfuric acid testing. An improved design for the second generation prototype was formulated based on these results, although the spherical shape and 5.5 m diameter size were retained. The resulting balloon has a volume of 87 cubic meters and is capable of carrying a 45 kg payload at a 55 km altitude at Venus. The design and fabrication of the new prototype is described, along with test data for inflation and leakage performance.

mobility↗

NASA NTRS2015

HAVOC: High Altitude Venus Operational Concept - An Exploration Strategy for Venus

The atmosphere of Venus is an exciting destination for both further scientific study and future human exploration. A lighter-than-air vehicle can carry either a host of instruments and probes, or a habitat and ascent vehicle for a crew of two astronauts to explore Venus for up to a month. The mission requires less time to complete than a crewed Mars mission, and the environment at 50 km is relatively benign, with similar pressure, density, gravity, and radiation protection to the surface of Earth. A recent internal NASA study of a High Altitude Venus Operational Concept (HAVOC) led to the development of an evolutionary program for the exploration of Venus, with focus on the mission architecture and vehicle concept for a 30 day crewed mission into Venus's atmosphere. Key technical challenges for the mission include performing the aerocapture maneuvers at Venus and Earth, inserting and inflating the airship at Venus, and protecting the solar panels and structure from the sulfuric acid in the atmosphere. With advances in technology and further refinement of the concept, missions to the Venusian atmosphere can expand humanity's future in space.

Arney, Dale↗

NASA NTRS2016

Space-Based Detection of Missing Sulfur Dioxide Sources of Global Air Pollution

Sulfur dioxide is designated a criteria air contaminant (or equivalent) by virtually all developed nations. When released into the atmosphere, sulfur dioxide forms sulfuric acid and fine particulate matter, secondary pollutants that have significant adverse effects on human health, the environment and the economy. The conventional, bottom-up emissions inventories used to assess impacts, however, are often incomplete or outdated, particularly for developing nations that lack comprehensive emission reporting requirements and infrastructure. Here we present a satellite-based, global emission inventory for SO2 that is derived through a simultaneous detection, mapping and emission-quantifying procedure, and thereby independent of conventional information sources. We find that of the 500 or so large sources in our inventory, nearly 40 are not captured in leading conventional inventories. These missing sources are scattered throughout the developing world-over a third are clustered around the Persian Gulf-and add up to 7 to 14 Tg of SO2 yr(exp -1), or roughly 6-12% of the global anthropogenic source. Our estimates of national total emissions are generally in line with conventional numbers, but for some regions, and for SO2 emissions from volcanoes, discrepancies can be as large as a factor of three or more. We anticipate that our inventory will help eliminate gaps in bottom-up inventories, independent of geopolitical borders and source types.

OMI↗

NASA NTRS2016

Venus Interior Probe Using In-Situ Power and Propulsion (VIP-INSPR)

Venus, despite being our closest neighboring planet, is under-explored due to its hostile and extreme environment, with a 92 bar pressure and 467 C temperature at the surface. The temperature decreases at higher altitudes, almost at the rate of 7.9 C/km, reaching the Earth surface conditions at 65 km. Due to the less extreme conditions, balloon missions could survive as long as 46 h at an altitude of 54 km. However, because of the opacity of the Venus atmosphere filled with clouds of sulfuric acid and CO2, orbiter or balloon missions are not as revealing and informative in characterizing the surface, as similar missions on Moon and Mars. To understand the evolutionary paths of Venus in relation to Earth, it is imperative to gather basic information on the crust, mantle, core, atmosphere/exosphere and bulk composition of Venus, through in-situ investigations using landers, probes and variable altitude areal platforms.

atmosphere↗

NASA NTRS2019

Long Duration Venus Probes and Landers

Planetary probes have long been a tool used by scientists to gain early clues on environments and systems of new planetary targets. This not only fueled the scientific process but also helped prepare for future missions, such as landers, and helped ensure their success. Venus, Earth's sister planet, has been the target of more probes and landers than any other body in our solar system except for Earth and yet many fundamental questions are unanswered. Challenge for Venus Surface Science: This lack of knowledge is a result of the challenging Venus environments. Remote sensing of the surface and portions of the atmosphere is difficult at best due to the thick layers of sulfuric acid clouds and the high pressure supercritical CO2 atmosphere below those clouds. This has hampered the ability of orbiting missions to provide us insight into surface features and processes and thus hides potential clues on interior process from our view. Surface probes and landers face an even more daunting challenge, which is the extreme temperature, pressure and unfriendly chemical composition of the near surface atmosphere. Over 10 assets have landed on the surface yet the longest surviving asset Venera-13 lasted only 127 minutes before succumbing to the extreme temperature. While this and other landers provided valuable new data, the short life impacted ability to understand any temporal processes, for example meteorology, seismic active, and therefore very little is known about the interior and surface atmosphere interactions. New Capability Offering Potential Solutions: Re-cent developments by NASA are offering hope of overcoming the technical challenges of surface operations and life with the use of high temperature electronics and systems. Wide band gap, SiC based electronics have been demonstrated to function successfully for extended periods of time both at 500C, Venus surface temperatures as well as when temperature is combined with the reactive chemistry of the surface atmosphere and the high pressures (over 90 bar pressure at the surface). In addition to electronics a number of other subsystems are in development including power in the form of high temperature batteries and power management devices, communications including antennas, transmitters and other components, materials, and structures and mechanisms. These are all activities under NASA's Long Lived In situ Solar System Exploration (LLISSE) project. Other activities are also funded under NASA's HOTTech program.

Kremic, T.↗

NASA NTRS2019

Long-Lived In-Situ Solar System Explorer (LLISSE): Potential Contributions to the Next Decade of Solar System Exploration

Venus, while having similar size, mass, and location in the solar system to Earth, varies from Earth in many ways and holds many scientific mysteries despite many missions that have focused on it in the past. Primary differences include Venus' climate, atmosphere, and perhaps most notably the extreme surface conditions. The layers of sulfuric acid clouds and high pressure CO2 laden atmosphere make remote sensing at Venus much less effective than at other solar system bodies. In addition, surface conditions present formidable engineering challenges due to the high temperature, pressure, and reactive chemistry. To date, landed missions have not been able to last more than about 2 hours on the surface [1]. This has resulted in significant knowledge gaps about the surface conditions of this important body in the solar system. The science community has effectively no in-situ temporal data at the Venus surface. These data are critical for the development of a thorough understanding of Venus' weather and the processes by which chemical species interact with each other and are transported throughout the atmospheric column. The LLISSE platform, and its variants, are a foundation for future mission concepts based on a core set of long-lived technologies providing significant new science as well as demonstrating new technical capabilities. After completion, LLISSE has the potential to be a complimentary element to missions going to Venus and would provide unique and important science to missions whether they be orbiters or short duration landers.

Kremic, Tibor↗

NASA NTRS2019

Long-Lived In-Situ Solar System Explorer (LLISSE)

Kremic, Tibor↗

NASA NTRSDate not supplied

TPSAS-NF1676L-33993-DND

Large volcanic eruptions are the primary sources of aerosols in the stratosphere and play an important role in the global climate system. The transformation of sulfur dioxide emitted by volcanoes into sulfuric acid droplets leads to a global cooling effect at the surface by enhanced reflection of solar radiation to space and reduced the earth's radiative budget for months to years. In June 2019, the Raikoke volcano, Kuril Islands (153.24167 E, 48.29167 N) emitted 1.4 Tg of SO2 between June 21st and 22nd with plume injection height between 7 and 15 km based on several ultra-violet and infrared sensors as well as the Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observation (CALIPSO) space-based lidar. CALIPSO and the NASA Langley Trajectory Model (LaTM) with GEOS5 meteorological data are used to track dispersed volcanic ash plumes. The trajectory mapping technique will be used to re-construct the 3-dimension structure of volcanic ash and sulfate. Results will be compared with independent observations from the Stratospheric Aerosol and Gas Experiment and GEOS-Chem model outputs to understand the transport of the plume into the stratosphere and its lifetime.

Hyundeok Choi↗

NASA NTRSDate not supplied

Lessons from Earth Bioaerosol Sampling for Venus Habitability & Biosignature Science

Venus’s clouds are often discussed as a potential habitat. Several high-priority science goals – cloud aerosol composition, internal radiative flux, and aerosol residence time and circulation models – will improve our understanding of Venus in an astrobiology context. Lessons from Earth’s aerobiosphere can inform these requirements and interpretation of results. A stable Venus aerobiosphere would need microorganisms to reproduce faster than they settle out due to gravity. This is a joint constraint of the potential nutrients and energy influx, bioenergetic costs such as desiccation and radiation damage, and aerosol dynamics. Though life cycles involving S- and Fe-based redox metabolism have been proposed, at an optimistic estimate of 75% H2SO4, Venus aerosol water activity (aw) is still ~0.02, far below the observed microbial growth limit of ~0.6. Long-term desiccation with brief spurts of repair, growth and reproduction in response to transient water influx (perhaps volcanism) is the most likely model for Earth-like life on Venus – a ‘desert bloom’ scenario. In Earth’s troposphere, clouds can carry 103 – 105 cells/mL, some metabolically active. A better analogue may be Earth’s stratospheric sulfate aerosol layer: supercooled sulfuric acid aerosols (acid weight fraction 0.6 – 0.85, 0.1 – 1 µm diameter, 0.1 – 1 cm-3) with little water activity, long residence times, high UV radiation, and only sporadic influx from surface particle sources. Viable cells isolated from this region are rare (~102 cells/m3), though ‘hot spots’ at tropospheric mixing occur. Cells are primarily in inactive forms such as spores, and it is unclear if any are associated with sulfate aerosols or simply co-located. Given the heterogeneities in Venus clouds and the model of a sparse, largely dormant ecosystem, a single transect on descent would most likely pass through a low-water, inactive region, missing potential signs of habitability or biosignatures. Even a passive aerial platform (balloon) may end up following a single air mass over its lifetime. A better strategy for Venus would target an aerial region with some upwelling from surface sources, and take multiple transects separated in time and space. Earth’s stratospheric bioaerosol population could provide a starting point for estimating the required lower volume and detection limits.

Earth↗

NASA NTRSDate not supplied

Supercritical Water Oxidation (SCWO) for the treatment of spacecraft waste.

Supercritical water oxidation (SCWO) is a powerful waste treatment that has been considered as a substitute or complement to other potential spacecraft waste handling methods including jettisoning, compacted sealed storage, drying, and others. Combustible trash and garbage is mixed with water and then heated and pressurized above the critical point of water (705 °F and 218 atmospheres). The waste is nearly all oxidized to produce carbon dioxide, water and nitrogen. NOx is not formed. The combustion energy can be used to heat the input stream. SCWO is relatively complex, expensive, and hazardous compared to other methods. Oxidation of compounds containing chlorine and sulfur produces hydrochloric and sulfuric acid which can cause corrosion in the reactor. Neutralizing these acids produces salts which can precipitate and cause clogging. The major engineering challenges to implementing SCWO are chemical corrosion and fouling due to the deposition of salts. SCWO was first proposed for general waste treatment and for spacecraft in the 1980’s and extensive research has been carried out.

Harry W Jones↗

NASA NTRS2021

Evidence for the predictability of changes in the stratosphericaerosol size following volcanic eruptions of diverse magnitudesusing space-based instruments

An analysis of multiwavelength stratospheric aerosol extinction coefficient data from the Stratospheric Aerosol and Gas Experiment II and III/ISS instruments is used to demonstrate a coherent relationship between the perturbation in extinction coefficient in an eruption’s main aerosol layer and the wavelength dependence of that perturbation. This relationship spans multiple orders of magnitude in the aerosol extinction coefficient of stratospheric impact of volcanic events. The relationship is measurement-based and does not rely on assumptions about the aerosol size distribution. We note limitations on this analysis including that the presence of significant amounts of ash in the main sulfuric acid aerosol layer and other factors may significantly modulate these results. Despite these limitations, the findings suggest an avenue for improving aerosol extinction coefficient measurements from single-channel observations such as the Optical Spectrograph and Infrared Imager System as they rely on a prior assumptions about particle size. They may also represent a distinct avenue for the comparison of observations with interactive aerosol models used in global climate models and Earth system models.

Larry W Thomason↗

NASA NTRS2020

VolKilau: Volcano Rapid Response Balloon Campaign During the 2018 Kilauea Eruption

After nearly 35 years of stable activity, the Kilauea volcanic system in Hawaiʽi, went through sudden changes in May 2018 with the emergence of 20 volcanic fissures along the Lower Eastern Rift Zone(LERZ) destroying 700 homes in Leilani Estates and forcing more than 2000 people to evacuate. Volcanic emissions lasted for several months between June and September 2018 leading to low visibility and poor air quality in Hawaiʽi and across the Western Pacific. The NASA-funded VolKilau mission was rapidly mounted and conducted between 11-18 June 2018 to: i) Profile volcanic emissions with SO2and aerosol measurements, ii) Validate satellite observations and iii) Be prepared for the next large volcanic eruption. Through a series of balloon-borne measurements with tethered and free released launches, we measured SO2 concentration, aerosol concentration and optical properties 60 to 80km downwind from the volcanic fissures using gas sensors, optical particle counters, backscatter sondes, and an aerosol impactor. While most of measurements made during the Kilauea eruption were ground-based, the VolKilau mission represented a unique opportunity to characterize plume properties, constrain emission profiles, study early chemistry involving the conversion of SO2 into sulfuric acid and understand the influence of water clouds in the removal of SO2. Our team continues to be better prepared for deploying in the event of a major volcanic eruption

J-P Vernier↗

NASA NTRSDate not supplied

Surface-Enhanced Raman Spectroscopy (SERS) for Venus Atmospheric Characterization and Trace Organics Identification

The chemical composition of Venus’ clouds has attracted considerable attention since the first atmospheric probes entered the planet in the early 1980s. We know from these early studies that cloud aerosols consist of micron and submicron droplets of sulfuric acid (~85%) and water (~15%), but outstanding questions still exist regarding their trace chemical composition, especially the identity of the unknown UV absorber(s) and the possible presence of organic material (Spacek & Benner, 2021). Veritas and DaVinci will launch at the end of the decade to advance our understanding of Venus’ surface and atmosphere, however these missions are not designed to sample and analyze cloud aerosols at trace levels. Raman spectroscopy is an ideal candidate for characterizing aerosols and has a track record in studies of Earth’s atmosphere. Raman provides broad chemical screening of organic and inorganic molecules within seconds, and Raman instrumentation can be miniaturized to meet the stringent size, weight, and power (SWaP) constraints of an atmospheric probe while retaining sensitivity and specificity that allow spectral fingerprinting of compounds and functional groups. Raman alone is insufficient to characterize trace constituents however, as limits of detection are typically in the 10s to 100s of ppm at best for planetary Raman spectrometers. Surface-Enhanced Raman Spectroscopy (SERS), a method that utilizes nanoscale materials interacting with a sample to enhance weak Raman signals by orders of magnitude when probed by a laser, has the potential to drastically improve the sensitivity of a Raman instrument while adding little-to-no SWaP nor complexity to a scientific payload. We aim to de-risk SERS technology for rapid infusion in future planetary science missions by developing custom SERS substrates tailored towards Venus atmospheric exploration. We have developed SERS substrates consisting of nanotextured silver films and tested them on potential Venus-relevant organic compounds, with preliminary results indicating sub-ppm sensitivity. Additionally, we have planned tests to investigate durability, longevity, and other key characteristics that impact SERS substrate performance to prepare SERS technology for flight.

Venus↗

NASA NTRSDate not supplied

Analog Environments for Venus Aerosol Instrument and Mission Concept Testing

The most common hypothesis discussed for life on Venus is a habitat in the dense, persistent clouds, which are primarily sulfuric acid with a secondary water component. Although Earth lacks a complete Venus analog environment, several partial analogs exist which can inform our understanding of the requirements for cloud habitability as well as serving as potential testbeds for future Venus instruments or missions. Earth’s tropospheric clouds have larger particles, more water, and shorter lifetimes than Venus’s; however, they have a partial overlap in pressure and temperature, and are our only example of an airborne habitat.They can inform how particle residence time and microbial generation time constrain habitable atmospheric regions. On the biological side, this includes available nutrients and energy, environmental stressors such as radiation, osmotic potential and acidity, and time spent in protective but inactive forms (endospores, cysts, akinetes); on the physical side, gravity, air density and viscosity, thermal lofting, gravity waves, scavenging due to precipitation, and other airflow dynamics, as well as effective particle radius and electrical charge. They can also enable sampling strategy tests for airborne life detection, ranging from10 2 to10 8 viable cells/mL (10 -3 to 10 -9 cells/particle). Conversely, Earth's stratospheric sulfate layer lacks an active microbial presence, and is at a colder and less dense altitude but has partially analogous values in terms of H2SO4 and water concentration, particle size, and number density. These aerosols are accessible to aircraft and high-altitude balloons. Even more accessible potential analogs include sea spray, which overlaps with the smaller (haze) particle sizes and densities at Venus and contains trace organic constituents; marine fog, which at higher densities can match Venus’s larger (Mode 2) particle properties and contains a range of trace compounds including ammonia, phosphates, sulfates, and nitrates; and spray from acidic hydrothermal systems, which can cover a wide variety of sizes, densities, and chemical compositions. These analogs could improve the development of Venus cloud sampling instruments or sondes, including field tests of material compatibility, particle capture efficiency, and analysis sensitivity.

Analog↗

NASA NTRS2021

Prototype Development of a Variable Altitude Venus Aerobot

This paper presents the design methodology and results from the first subscale prototype jointly developed by JPL and Near Space Corporation for a variable altitude Venus aerobot. This vehicle is based on the principle of a two-part balloon for which pumping helium gas between the balloons can modulate buoyancy and thereby control the altitude of the vehicle. The intended mission application at Venus is a cloud-level exploration across an altitude range of 52 to 62 kilometers for weeks or months, circumnavigating the planet multiple times and carrying an approximately 100 kg payload module containing all scientific instruments, avionics and other vehicle support systems. The first prototype is approximately one-third scale (4 m diameter) and serves as a proof-of-concept test article allowing for evaluation of manufacturing approaches and laboratory testing to evaluate performance. Two key design features of the prototype as built are the use of Teflon film on the outside of the balloon to protect it from the sulfuric acid aerosols in the Venusian atmosphere and second surface metallization of that film to reflect most incident sunlight and thereby limit diurnal temperature and the associated temperature-driven pressure fluctuations. This prototyping effort has been complemented with a detailed vehicle simulation activity that incorporates the relevant balloon physics and thereby models the expected dynamic behavior of the aerobot in both the Earth and Venus atmospheres. Data obtained in laboratory tests of the prototype have been used to validate, verify and update that simulation model as described in the paper.

Turner, Caleb↗

NASA NTRSDate not supplied

GEER (Glenn Extreme Environments Rig): Current Project Status

Venus is Earth’s closest planetary neighbor, and it is often considered as Earth’s twin for its size and density. However, the extreme Venus surface conditions (temperatures of ~ 460 o C, pressure of ~90 bars, and reactive atmospheric chemical species such as supercritical CO 2 , sulfuric acid, and other toxic elements) results in short duration of Venus lander missions to date to survive for only 127 minutes. It is essential to enable multiple longer-lived Venus surface missions to understand the planet’s origin, history, climate, and interior. A systematic approach for future Venus lander material selection is to characterize and study the reactivity of high potential materials by exposing materials to a simulated Venus surface conditions. Glenn Extreme Environments Rig (GEER) at NASA’s Glenn Research Center (GRC) has been the leading facility simulating the high-temperature and pressure extremes of Venus as well as reproducing conditions of the gas mixture expected at the Venus surface since 2015. Here, we report on GEER’s recent accomplishments in assessing risks for future potential Venus missions and ongoing testing process and capability enhancement in supporting other planetary science missions.

GEER↗