Search NASA⌕ Search

SEARCH · Search NASA

Results for “Space Missions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39
All sourcesNASA NTRSDOE OSTI
NASA NTRS1980

Characterization of three types of silicon solar cells for SEPS Deep Space Mission. Volume 3: Current-voltage characteristics of spectrolab sculptured BSR/P+ (K7), BSR/P+ (K6.5) and BSR (K4.5) cells as a function of temperature and intensity

Three types of high performance silicon solar cells, sculptured BSR/P+(K7), BSR/P+(K6.5) and BSR(K4.5) manufactured by Spectrolab were evaluated for their low temperature and low intensity performance. Sixteen cells of each type were subjected to 11 temperatures and 9 intensities. The sculptured BSR/P+(K7) cells provided the greatest maximum power output both at 1 AU and at LTLI conditions. The average efficiencies of this cell were 14.4 percent at 1 SC/+25 deg C and 18.5 percent at 0.086 SC/-100 deg C.

Whitaker, A. F.↗
NASA NTRS1981

Performance of concatenated codes for deep space missions

Computer simulation results are presented on the performance of convolutional codes of constraint lengths 7 and 10 concatenated with the (255, 223) Reed-Solomon code (a proposed NASA standard). These results indicate that as much as 0.8 dB can be gained by concatenating this Reed-Solomon code with a (10, 1/3) convolutional code, instead of the (7, 1/2) code currently used by the DSN.

Butman, S. A.↗
NASA NTRS1981

Integrated propulsion for near-Earth space missions. Volume 1: Executive summary

Tradeoffs between electric propulsion system mass ratio and transfer time from LEO to GEO were conducted parametrically for various thruster efficiency, specific impulse, and other propulsion parameters. A computer model was developed for performing orbit transfer calculations which included the effects of aerodynamic drag, radiation degradation, and occultation. The tradeoff results showed that thruster technology areas for integrated propulsion should be directed towards improving primary thruster efficiency in the range from 1500 to 2500 seconds, and be continued towards reducing specific mass. Comparison of auxiliary propulsion systems showed large total propellant mass savings with integrated electric auxiliary propulsion. Stationkeeping is the most demanding on orbit propulsion requirement. At area densities above 0.5 sq m/kg, East-West stationkeeping requirements from solar pressure exceed North-South stationkeeping requirements from gravitational forces. A solar array pointing strategy was developed to minimize the effects of atmospheric drag at low altitude, enabling electric propulsion to initiate orbit transfer at Shuttle's maximum cargo carrying altitude. Gravity gradient torques are used during ascent to sustain the spacecraft roll motion required for optimum solar array illumination. A near optimum cover glass thickness of 6 mils was established for LEO to GEO transfer.

Dailey, C. L.↗
NASA NTRS1981

Integrated propulsion for near-Earth space missions. Volume 2: Technical

The calculation approach is described for parametric analysis of candidate electric propulsion systems employed in LEO to GEO missions. Occultation relations, atmospheric density effects, and natural radiation effects are presented. A solar cell cover glass tradeoff is performed to determine optimum glass thickness. Solar array and spacecraft pointing strategies are described for low altitude flight and for optimum array illumination during ascent. Mass ratio tradeoffs versus transfer time provide direction for thruster technology improvements. Integrated electric propulsion analysis is performed for orbit boosting, inclination change, attitude control, stationkeeping, repositioning, and disposal functions as well as power sharing with payload on orbit. Comparison with chemical auxiliary propulsion is made to quantify the advantages of integrated propulsion in terms of weight savings and concomittant launch cost savings.

Dailey, C. L.↗
NASA NTRS1981

Electric propulsion and its applications to space missions

Consideration is given the NASA, Air Force and European electric propulsion programs, the characteristics of primary electric propulsion systems, nuclear electric orbit transfer vehicles, and such topics in the fundamental processes of electrostatic thrusters as sputtering in mercury ion thrusters, the screen hole plasma sheath of an ion accelerator system, and the modelling of ion beam neutralization and nitrogen chemisorption. Also considered are electrostatic thruster components and systems, electromagnetic thrusters such as MPD and RIT systems, electric rail guns and mass drivers, power sources which include solar and nuclear alternatives, power conversion systems and their cooling apparatus, and the environmental interactions between spacecraft and their electric propulsion systems.

Finke, R. C.↗
NASA NTRS1981

Millimeter-wave experiments for cometary space missions

Predicted brightness temperatures, computed by means of radiative transfer techniques adapted from the modeling of terrestrial ice and snow fields, are given for cometary nucleus models consisting of homogeneous layers of water ice and refractory grain mixtures presented as functions of wavelength. The computed millimeter-wave spectra are sensitive to the values of such physically significant nucleus parameters as (1) crust thickness, (2) subsurface temperature gradient, and (3) sublimating surface boundary temperature. Although antenna beam dilution is a major obstacle for ground-based molecular spectral line radio observations of comets, a millimeter-wave radiometer in the vicinity of the comet would be immune to this effect and able to make observations of several candidate parent molecules in the gas phase.

Hobbs, R. W.↗
NASA NTRS1984

Implementation of Large Antennas for Deep Space Mission Support

The large antennas of the DSN support reception of low power telemetry signals from spacecraft (S/C), transmission of high power commands to S/C, and navigation of S/C by precision radiometric data. The specification and design of antennas were driven by the requirement to support those functions with high reliability. The number of antennas required in the DSN is determined by the number of S/C to be supported and their level of activity. A given size antenna aperture can be realized with a single element or by arraying smaller elements with the same total area. That approach can be applied to meeting many DSN requirements. There is a cost vs capability trade-off in arrayed vs single element designs. The operating microwave frequency is an important parameter for the antenna. Major radio astronomy antennas can be arrayed with DSN antennas to increase reception capability. The specification, design, and development of DSN antennas are examined.

Stevens, R.↗
NASA NTRS1985

Remote sensing technologies for Space Missions in the second half of the nineties' decade

The remote sensing research and technology to be used in the development of future NASA missions are discussed, with consideration given to earth sciences, planetary sciences, solar physics, and astrophysics. The remote sensing missions planned in the four application areas, their payload packages, and the particular instruments that will make up these packages are described. The advanced technologies to be used include systems and devices that address the detection of radiation in the radio, microwave, millimeter wave, submillimeter wave, IR, visible, UV, X-ray, and gamma-ray parts of the spectrum, including supporting technologies, such as optics, liquid cryogen transfer systems, and 'smart' sensors.

Sokoloski, M. M.↗
NASA NTRS1987

Environmental control and life support system requirements and technology needs for advanced manned space missions

NASA has completed an environmental control and life support system (ECLSS) technology R&D plan for advanced missions which gave attention to the drivers (crew size, mission duration, etc.) of a range of manned missions under consideration. Key planning guidelines encompassed a time horizon greater than 50 years, funding resource requirements, an evolutionary approach to goal definition, and the funding of more than one approach to satisfy a given perceived requirement. Attention was given to the ECLSS requirements of transportation and service vehicles, platforms, bases and settlements, ECLSS functions and average load requirements, unique drivers for various missions, and potentially exploitable commonalities among vehicles and habitats.

Powell, Ferolyn T.↗
NASA NTRS1989

Performance and durability of HgI2 X-ray detectors for space missions

Considerable progress has been achieved recently in HgI2 detector fabrication technology and amplification electronics. An energy resolution of 198 eV (full width at half maximum) has been obtained for the Mn k-alpha line of 5.9 keV in a practical X-ray probe without the use of cryogenic cooling. Detectors prepared with Parylene-C encapsulation have demonstrated perfect reliability in two-year tests under high vacuum and temperature and bias cycling. Other HgI2 detectors have been used to demonstrate proton-radiation-damage resistance to levels of 10 to the 12 protons/sq cm at 10.7 MeV. It is concluded that HgI2 detectors are suitable for the ordinary requirements of energy dispersive detectors in X-ray spectroscopy systems.

Iwanczyk, J. S.↗
NASA NTRS1989

Near-term nuclear space missions

This paper summarizes the current status of proposed NASA Human Exploration Missions (MEMs) presenting detail with respect to schedule and system features. Using the Lunar exploration and Mars exploration missions as design drivers, new vehicle elements have been configured and optimized to meet proposed mission requirements. Both conventional chemical propulsion and alternative vehicle designs incorporating advanced nuclear propulsion systems are included, and the total mass required in Low Earth Orbit (LEO) is compared for each propulsion system.

Andrews, Dana G.↗
NASA NTRS1989

Habitability during long-duration space missions - Key issues associated with a mission to Mars

Isolation and confinement conditions similar to those of a long-duration mission to Mars are examined, focusing on 14 behavioral issues with design implications. Consideration is given to sleep, clothing, exercise, medical support, personal hygiene, food preparation, group interaction, habitat aesthetics, outside communications, recreational opportunities, privacy, waste disposal, onboard training, and the microgravity environment. The results are used to develop operational requirements and habitability design guidelines for interplanetary spacecraft.

Stuster, Jack↗
NASA NTRS1991

Further applications of a Figure-of-Merit in space missions

A redesigned figure-of-merit (FoM) approach is described with respect to its applications in projects that employ in situ resource utilization (ISRU) and advanced modular engines. The FoM considers long-term effects, reliability of hardware, and risks inherent to new technologies, as well as significant design parameters. A spreadsheet is utilized to describe the FoM by means of key mission characteristics and combinations of the characteristic inputs in terms of precise governing equations. Results of the FoMs for historical and Mars Sample Return (MSR) missions are given for the conventional mission as well as an ISRU mission for the MSR. A detailed description of the most effective Mars mission is presented, showing how different factors affect the FoM. The results demonstrate that the FoM gives quantitative results based on overall mission design, allowing intercomparisons of similar missions. The FoM can be used as a screening parameter by modifying aspects of the mission by means of the R-factor.

Preiss, Bruce↗
NASA NTRS1991

Generalized covariance analysis for partially autonomous deep space missions

A new covariance analysis method is presented that is suitable for the evaluation of multiple impulsive controllers acting on some stochastic process x. The method accommodates batch and sequential estimators with equal ease and accounts for time-delay effects in a natural manner. The formalism is developed in terms of a generalized state vector that is formed from the system state vector x, augmented by various fixed epoch estimates, and a data vector formed from discrete time observations of the system. Recursions are developed for time transition, measurement incorporation, and impulsive control updating of the generalized covariance matrix. Means of limiting the dimensional growth of the generalized state vector via the processes of estimator epoch adjustment and measurement vector deflation are described and the application of numerically stable matrix factorization methods to the generalized covariance recursions is outlined. The method is applied to the Magellan spacecraft to demonstrate the capability of ground-based optimal estimation and control of gyro/star scanner misalignment.

Boone, Jack N.↗
NASA NTRS1991

The use of membranes in life support systems for long-duration space missions

The use of membrane processes in a long-duration manned mission's regenerative environmental control and life-support system is presently discussed, in the cases of treatment for hygiene water, urine, humidity condensate, and phase-change distillate, as well as of water-vapor and CO2 removal from spacecraft air. Attention is given to the design of a tube-side-feed hollow-fiber module for membrane support and fluids-feed, as well as to the schematics for a membrane-based urine processor, an air recirculator, a potable-water producer, and a two-stage urine treater.

Mccray, S. B.↗
NASA NTRS1992

Enabling lunar and space missions by laser power transmission

Applications are proposed for laser power transmission on the Moon. A solar-pumped laser in lunar orbit would beam power to the lunar surface for conversion into either electricity or propulsion needs. For example, lunar rovers could be much more flexible and lighter than rovers using other primary power sources. Also, laser power could be absorbed by lunar soil to create a hard glassy surface for dust-free roadways and launch pads. Laser power could also be used to power small lunar rockets or orbital transfer vehicles, and finally, photovoltaic laser converters could power remote excavation vehicles and human habitats. Laser power transmission is shown to be a highly flexible, enabling primary power source for lunar missions.

Deyoung, R. J.↗
NASA NTRS1993

Design and application of electromechanical actuators for deep space missions

During the period 8/16/92 through 2/15/93, work has been focused on three major topics: (1) screw modeling and testing; (2) motor selection; and (3) health monitoring and fault diagnosis. Detailed theoretical analysis has been performed to specify a full dynamic model for the roller screw. A test stand has been designed for model parameter estimation and screw testing. In addition, the test stand is expected to be used to perform a study on transverse screw loading.

Haskew, Tim A.↗