Search NASA⌕ Search

SEARCH · Search NASA

Results for “Structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Local atomic structure of Pd and Ag in the SiC containment layer of TRISO fuel particles fissioned to 20% burn-up

The structure and speciation of fission products within the SiC barrier layer of tristructural-isotropic (TRISO) fuel particles irradiated to 19.6% fissions per initial metal atom (FIMA) burnup in the Advanced Test Reactor (ATR) at Idaho National Laboratory (INL) was investigated. As-irradiated fuel particles, as well as those subjected to simulated accident scenarios, were examined. The TRISO particles were characterized using synchrotron X-ray absorption fine-structure spectroscopy (XAFS) at the Materials Research Collaborative Access Team (MRCAT) beamline at the Advanced Photon Source. The TRISO particles were produced at Oak Ridge National Laboratory under the Advanced Gas Reactor Fuel Development and Qualification Program and sent to the ATR for irradiation. XAFS measurements on the palladium and silver K-edges were collected using the MRCAT undulator beamline. Analysis of the Pd edge indicated the formation of palladium silicides of the form Pd x Si (2 ≤ x ≤ 3). In contrast, Ag was found to be metallic within the SiC shell safety tested to 1700 °C. To the best of our knowledge, this is the first result demonstrating metallic bonding of silver from fissioned samples. Knowledge of these reaction pathways will allow for better simulations of radionuclide transport in the various coating layers of TRISO fuels for next generation nuclear reactors. In conclusion, they may also suggest different ways to modify TRISO particles to improve their fuel performance and to mitigate potential fission product release under both normal operation and accident conditions.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2017

Standardization of accelerator irradiation procedures for simulation of neutron induced damage in reactor structural materials

Self-ion irradiation is widely used as a method to simulate neutron damage in reactor structural materials. Accelerator-based simulation of void swelling, however, introduces a number of neutron-atypical features which require careful data extraction and in some cases introduction of innovative irradiation techniques to alleviate these issues. We briefly summarize three such atypical features: defect imbalance effects, pulsed beam effects, and carbon contamination. The latter issue has just been recently recognized as being relevant to simulation of void swelling and is discussed here in greater detail. It is shown that carbon ions are entrained in the ion beam by Coulomb force drag and accelerated toward the target surface. Beam-contaminant interactions are modeled using molecular dynamics simulation. By applying a multiple beam deflection technique, carbon and other contaminants can be effectively filtered out, as demonstrated in an irradiation of HT-9 alloy by 3.5 MeV Fe ions.

Environmental Molecular Sciences Laboratory↗
DOE OSTI2018

Structural connection between gallium crystals and near- T m liquids under ambient pressure

We study the short-range structural order in liquid gallium prepared by ab initio molecular dynamics simulations. We found that at 400 K, which is close to the melting point (Tm) of Ga, the dominant motif in the liquid phase is identical to that in the stable solid phase Ga-I. Strong directional bonding in this motif prevents it from nucleation in the liquid phase. Meanwhile, a newly identified motif, topologically distinct from yet related to those in β-Ga and Ga-III phases, is also abundant in Ga liquid. This new motif could serve as precursors for β-Ga or Ga-III during crystallization.

Zhang, F.↗
DOE OSTI2022

Chemical and Structural Alterations in the Amorphous Structure of Obsidian due to Nanolites

Obsidian is volcanic glass that results from the rapid cooling of silica-rich melt. Nanoscale crystallites precipitate out of the melt prior to solidification and remain embedded in the amorphous matrix. These crystallites provide information on the flow kinetics and composition of the melt. Due to the sparsity and size of nanolites, studies often focus on supramicron crystallites. This research takes advantage of the conchoidal fracture of obsidian by knapping samples with nanometer-thin edges for transmission electron microscopy characterization. Nanolites in the amorphous matrix are studied using energy-dispersive spectroscopy (EDS) and electron diffraction. Certain alkali and alkaline-earth cations exhibit patterns of depletion near Fe-oxide nanolites. EDS is used to identify nanolites and variations in the composition of the matrix. Parallel beam diffraction and radial distribution function analysis of nearest-neighbor distances determine average bond lengths in the matrix near nanolites, showing that nanolites influence the nearby short-range ordering and atomic character of the matrix. Analysis reveals decreased mean nearest-neighbor distances in the matrix adjacent to nanolites compared to the bulk. Our methods exhibit the required sensitivity to detect variations in the composition and structure near nanolites, and our findings indicate that obsidian nanolites contribute to quantifiable localized changes in the amorphous structure.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Crystal Structure Evolution and Notable Thermal Expansion in Hybrid Perovskites Formamidinium Tin Iodide and Formamidinium Lead Bromide

The temperature-dependent structure evolution of the hybrid halide perovskite compounds, formamidinium tin iodide (FASnI 3 , FA + = CH[NH 2 ] 2 + ) and formamidinium lead bromide (FAPbBr 3 ), has been monitored using high-resolution synchrotron X-ray powder diffraction between 300 and 100 K. The data are consistent with a transition from cubic Pm$\bar{3}$m (No. 221) to tetragonal P 4 /mbm (No. 127) for both materials upon cooling; this occurs for FAPbBr 3 between 275 and 250 K, and for FASnI 3 between 250 and 225 K. Upon further cooling, between 150 and 125 K, both materials undergo a transition to an orthorhombic Pnma (No. 62) structure. The transitions are confirmed by calorimetry and dielectric measurements. In the tetragonal regime, the coefficients of volumetric thermal expansion of FASnI 3 and FAPbBr 3 are among the highest recorded for any extended inorganic crystalline solid, reaching 219 ppm K –1 for FASnI 3 at 225 K. Atomic displacement parameters of all atoms for both materials suggest dynamic motion is occurring in the inorganic sublattice due to the flexibility of the inorganic network and dynamic lone pair stereochemical activity on the B-site. Unusual pseudocubic behavior is displayed in the tetragonal phase of the FAPbBr 3 , similar to that previously observed in FAPbI 3 .

36 MATERIALS SCIENCE↗
DOE OSTI2019

Effect of Block Length and Side Chain Length Ratios on Determining a Multicompartment Micelle Structure

Previous work has identified the importance of the lipophilic-fluorophilic block length ratio R l in predicting the morphology of linear lipophilic-hydrophilic-fluorophilic (hereafter referred to as BAC) micelle systems. Here, a generalized form R of this structural parameter is developed that makes no assumption of BAC triblock copolymer linearity, while still providing accurate predictions of micelle morphology. Here, the morphologies of BAC micelles formed by triblock copolymers with R <<1 or R >>1 have similar features, with the only notable difference being an inversion of the lipophilic and fluorophilic regions. A destabilization of the single-core micelle structure occurs as R approaches unity from either direction. Finally, the extent to which micelle morphology depends on polymer architecture instead of composition alone is examined, with decreased patchiness observed in BAC systems with very long block lengths. Through modification of both the R-value and the polymer architecture, the micelle morphology can be effectively tuned for use in immobilized catalysis and nanoreactor applications.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Structure Evolution of Chemically Degraded ZIF-8

Exposure of the metal–organic zeolitic imidazolate framework-8 (ZIF-8) to humid SO x gas cleaves Zn–N bonds, leading to framework disorder and a corresponding decrease in pore accessibility. This work shows that framework disorder exhibits a critical behavior with respect to water concentration in the gas stream. While the quantity of sulfate adsorbed at Zn nodes is at or below the detection threshold for the X-ray pair distribution function technique, precluding direct observation of the adsorbate, powder diffraction reveals clear structural alterations. Here, the onset of linker cleavage correlates to a large microstrain that diminishes as framework disorder increases. Energy-dispersive X-ray spectroscopy shows that the sulfur distribution throughout representative grains is uniform, implying the structure transformation is homogeneously nucleated and not dependent upon gas diffusion kinetics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Molecular Dynamics Simulations of Water Structure and Diffusion in a 1 nm Diameter Silica Nanopore as a Function of Surface Charge and Alkali Metal Counterion Identity

Water confined in nanopores-particularly in pores narrower than 2 nm-displays distinct physicochemical properties that remain incompletely examined despite their importance in nanofluidics, molecular biology, geology, and materials sciences. In this study, we use molecular dynamics simulations to investigate the coordination structure and mobility of water and alkali metals (Li, Na, K, Cs) inside a 1 nm diameter cylindrical silica nanopore as a function of surface charge density, a model system particularly relevant to the alteration kinetics of silicate glasses and minerals in geologic formations. We find that the presence of a negative surface charge and adsorbed counterions within the pore strongly impacts water structure and dynamics. In particular, it significantly orients water O-H bonds toward the surface and slows water diffusion by almost 1 order of magnitude. Ion crowding in the charged nanopore enhances the tendency of counterions to coordinate closely with the silica surface, which moderates the impact of ions on water dynamics. Co-ions are strongly excluded from the nanopore at all surface charges, suggesting that the 1 nm diameter cylindrical silica nanopores likely exhibit nearly ideal semipermeable membrane transport properties.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2018

Mineral–Water Interface Structure of Xenotime (YPO 4 ) {100}

Crystal truncation rod (CTR) measurements and density functional theory (DFT) calculations were performed to determine the atomic structure of the mineral–water interface of the {100} surface of xenotime (nominally YPO 4 ). This mineral is important, because it incorporates a variety of rare earth elements (REEs) in its crystal structure. REEs are critical materials necessary for a variety of renewable and energy efficient technologies. Current beneficiation techniques are not highly selective for REE ore minerals, and large amounts go to waste; this is a first step toward designing more efficient beneficiation. Evidence is found for minor relaxation of the surface within the topmost monolayer with little or no relaxation in subsurface layers. Justification for ordered water at the interface is found, where water binds to surface cations and donates hydrogen bonds to surface phosphates. The average bond lengths between cations and oxygens on water are 228 pm in the best fit to the CTR data, versus 243 and 251 pm for the DFT. No agreement on water positions bound to surface phosphates is obtained. Altogether, the findings suggest that ligands used in beneficiation with a single anionic headgroup, such as fatty acids, will have limited selectivity for xenotime relative to undesirable minerals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Anomalies and Local Structure of Liquid Water from Boiling to the Supercooled Regime as Predicted by the Many-Body MB-pol Model

For the past 50 years, researchers have sought molecular models that can accurately reproduce water’s microscopic structure and thermophysical properties across broad ranges of its complex phase diagram. Herein, molecular dynamics simulations with the many-body MB-pol model are performed to monitor the thermodynamic response functions and local structure of liquid water from the boiling point down to deeply supercooled temperatures at ambient pressure. The isothermal compressibility and isobaric heat capacity show maxima near 223 K, in excellent agreement with recent experiments, and the liquid density exhibits a minimum at ~208 K. A local tetrahedral arrangement, where each water molecule accepts and donates two hydrogen bonds, is found to be the most probable hydrogen-bonding topology at all temperatures. Further, this work suggests that MB-pol may provide predictive capability for studies of liquid water’s physical properties across broad ranges of thermodynamic states, including the so-called water’s “no man’s land” which is difficult to probe experimentally.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

The Relationship between Ionic Conductivity and Solvation Structures of Localized High-Concentration Fluorinated Electrolytes for Lithium-Ion Batteries

Localized high concentration electrolyte (LHCE) combines a diluent with high concentration electrolyte (HCE), offering promising properties. The ions, solvent, and diluent interact to form a complex heterogenous liquid structure, where high salt concentration clusters are embedded in diluent. Optimizing LHCE for desired electrolyte properties like high ionic conductivity, low viscosity, effective solid electrolyte interphase (SEI) formability, within the vast chemical and compositional design space requires deeper understanding and theoretical guidance. For this work, we investigated the structures and conductivity of LHCEs based on a fluorinated solvent with two different diluents at varying concentrations. The 2,2,3,3-tetrafluoropropyl trifluoroacetate (TFPTFA) enters the solvation cluster due to its stronger Li-ion interactions, whereas 1,1,2,2-tetrafuoroethyl 2,2,2-trifuoroethyl ether (TFETFE) enters only at extremely high diluent concentrations. The ionic conductivity increases with decreasing diluent concentrations, with a slope change during cluster percolation. Overall, TFETFE demonstrates higher effectiveness than TFPTFA, forming higher local salt concentration clusters, and resulting in higher ionic conductivity.

cluster chemistry↗
DOE OSTI2017

Effects of Nonhydrostatic Stress on Structural and Optoelectronic Properties of Methylammonium Lead Bromide Perovskite

We report synchrotron X-ray diffraction, photoconductivity, and photoluminescence investigations of methylammonium-lead-bromide (MAPbBr3) under various stress conditions, supported by density-functional-theory (DFT) calculations. The properties of MAPbBr3 show substantial dependence on the hydrostatic conditions. While nonhydrostatic compression of MAPbBr3 leads to amorphization above 2.4 GPa, under quasi-hydrostatic (Ar) and hydrostatic (He) pressure, the sample remains in crystalline phases. A sequence of phase transitions between two cubic phases and orthorhombic Pnma phase is observed when using Ar, or no pressure-transmitting-medium (PTM). In helium-PTM only transitions between the two cubic structures and a new isostructural phase transition with a large volume collapse to a third cubic-phase at 2.7 GPa was observed. The photoluminescence measurements indicate a pressure-induced band gap-narrowing in the cubic phase I, and a blue-shift in the orthorhombic structure. DFT calculations illustrate that the dynamics of the organic molecules and the inorganic lattice, coupled via the N–H···Br hydrogen-bonding interactions, affect the Pb–Br distance and the bandgap evolution under pressure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Internally Referenced DOSY-NMR: A Novel Analytical Method in Revealing the Solution Structure of Lithium-Ion Battery Electrolytes

Here, a novel methodology is reported on the use of internally referenced diffusion-ordered spectroscopy (IR-DOSY) in divulging the solution structure of lithium-ion battery electrolytes. Toluene was utilized as the internal reference for 1 H-DOSY analysis due to its exceptionally low donor number and reasonable solubility in various electrolytes. With the introduction of the internal reference, the solvent coordination ratio of different species in the electrolytes can be easily determined by 1 H-DOSY or 7 Li-DOSY. This new technique was applied to different carbonate electrolytes, and the results were consistent with a Fourier transform infrared (FTIR) analysis. Compared to conventional vibrational spectroscopy, this IR-DOSY technique avoids the complicated deconvolution of the spectrum and allows determination of the solvent coordination ratio of different species in electrolyte systems with two or more organic solvents.

25 ENERGY STORAGE↗