Search NASA⌕ Search

SEARCH · Search NASA

Results for “System Effectiveness”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

Investigation of lightweight designs and materials for LO2 and LH2 propellant tanks for space vehicles, phase 1

Design, analysis, and fabrication studies were performed on nonintegral (suspended) tanks using a representative space tug design. The LH2 and LO2 tank concept selection was developed. Tank geometries and support relationships were investigated using tug design propellant inertias and ullage pressures, then compared based on total tug systems effects. The tank combinations which resulted in the maximum payload were selected. Tests were conducted on samples of membrane material which was processed in a manner simulating production tank fabrication operations to determine fabrication effects on the fracture toughness of the tank material. Fracture mechanics analyses were also performed to establish a preliminary set of allowables for initial defects.

Source record↗

New directions in space electronics

Five new directions in space electronics are defined to yield improvements over present means: automated operations aimed at a tenfold reduction in mission support costs, precision pointing and control, efficient data acquisition to permit the tenfold increase in information collection needed for global coverage, real-time data management, and low-cost data distribution to allow a thousand-fold increase in information availability and space-systems effectiveness. Technological developments and resources for each of the new directions are derived from space-technology and space-theme workshops. One to two order of magnitude improvements in instrument pointing stability will be necessary for Shuttle and planetary payloads of the 1980s. Low-cost user terminals will involve technological addressing both near-term and long-term applications. NASA has reoriented its research and technology-base programs to support the goals represented by the new directions in space electronics. Numerous charts and schematic diagrams supplement the text.

Kurzhals, P. R.↗

Instrument measures many optical properties in visible and IR

Electro-optical system measures reflectance, reflectance ratio, transmission, absorption, refractive index, and absorption coefficient in both visible and infrared (IR) spectral regions. System effectively combining capabilities of ellisometer, reflectometer, and spectrophotometer is expected to find application in environmental and material composition testing fields.

Batten, C. E.↗

Determination of the ozone profile from the outgoing thermal emission

Problems of the information content of measuring the spectral and angular distribution of the outgoing thermal emission of the atmosphere-earth system in the 9.6 mm ozone absorption band are discussed. Two methods (nadir and limb) of remote measurement are considered. Information data obtained are evaluated according to three systems. Effectiveness of the regression interpretation method using the data of nadir and limb measurements is shown.

Borisenkov, Y. P.↗

Flight prototype CO2 and humidity control system

A regenerable CO2 and humidity control system is presently being developed for potential use on shuttle as an alternative to the baseline lithium hydroxide system. The system utilizes a sorbent material (designated HS-C) to adsorb CO2 and the latent heat load from the cabin atmosphere and desorb the CO2 and water vapor overboard when exposed to a space vacuum, thus reducing the overall vehicle heat rejection load. Continuous operation is achieved by utilizing two beds which are alternatively cycled between adsorption and desorption. The HS-C material process was verified. Design concepts for the auxiliary components for the HS-C prototype system were generated. Performance testing verified system effectiveness in controlling CO2 partial pressure and humidity.

Rudy, K. M.↗

Performability modeling with continuous accomplishment sets

A general modeling framework that permits the definition, formulation, and evaluation of performability is described. It is shown that performability relates directly to system effectiveness, and is a proper generalization of both performance and reliability. A hierarchical modeling scheme is used to formulate the capability function used to evaluate performability. The case in which performance variables take values in a continuous accomplishment set is treated explicitly.

Meyer, J. F.↗

Orbital transfer of large space structures with nuclear electric rockets

This paper discusses the potential application of electric propulsion for orbit transfer of a large spacecraft structure from low earth orbit to geosynchronous altitude in a deployed configuration. The electric power was provided by the spacecraft nuclear reactor space power system on a shared basis during transfer operations. Factors considered with respect to system effectiveness included nuclear power source sizing, electric propulsion thruster concept, spacecraft deployment constraints, and orbital operations and safety. It is shown that the favorable total impulse capability inherent in electric propulsion provides a potential economic advantage over chemical propulsion orbit transfer vehicles by reducing the number of Space Shuttle flights in ground-to-orbit transportation requirements.

Silva, T. H.↗

Ultraviolet-Induced Mirror Degradation

Recent tests of second-surface mirrors show that ultraviolet radiation penetrates glass and metalized zone and impinges upon backing paint. According to report, many backing materials are degraded by ultraviolet radiation. Mirror corrosion is a serious problem in solar-energy collection systems. Effects of UV on polymeric materials have been studied, and in general, all are degraded by UV. Polymers most resistant to UV radiation are polyimides.

Bouquet, F. L.↗

An attitude reorientation algorithm for the Galileo spacecraft

This paper presents an onboard closed loop attitude reorientation algorithm for a dual-spin spacecraft, Galileo. The basic concept for the design uses the despun stator as a reference and fires a sequence of fixed duration thruster pulses to precess the angular momentum vector to its commanded orientation. The error signals used to despin the stator and to perform the turn are derived from the stator error quaternion which is computed using gyro outputs. Constraints considered in the design include gyro rate saturation, plume impingement effects, system parameter variations, as well as software reliability and flexibility. The performance of the algorithm was predicted by analysis and confirmed by computer simulation results. It was concluded that a reorientation accuracy of better than 1 milliradian with a nutation angle of less than 1 degree during the turn can be achieved.

Lin, H.-S.↗

A 406 MHz geostationary satellite SARSAT experiment

A 406 MHz SARSAT experiment using the GOES system to demonstrate the utility of integrating a near-instantaneous distress alerting capability achievable by the geostationary satellites with the location capability of the low altitude, near-polar orbiting satellite system is described. Tests include the evaluation of technical performance of a variety of maritime, aviation, and land-based SARSAT beacons under operational environment conditions as well as a demonstration of system effectiveness in pseudo real distress incident situations. The technical performance tests parallel the CCIR coordinated trials program conducted at L-band frequencies using the INMARSAT satellites. Tests, including schedules, are outlined.

Friedman, M. L.↗

Space crew productivity: A driving factor in space station design

The criteria of performance, cost, and mission success probability (program confidence) are the principal factors that program or project managers and system engineers use in selecting the optimum design approach for meeting mission objectives. A frame of reference is discussed in which the interrelationships of these pertinent parameters can be made visible, and from which rational or informed decisions can be derived regarding the potential impact of adjustments in crew productivity on total Space Station System effectiveness.

Wolbers, H. L.↗

Passive microwave precipitation measurements for EOS

It is currently planned to mount a Special Sensor Microwave/Imager (SSM/I) on the manned Space Station (MSS) to obtain quantitative global precipitation data. Passive SSM/I instruments could also be included on other satellites, and function in the 19.35 GHz, V/H polarization, 22.35 GHz, V polarization, 37.0, V/H polarization, and 85.5 GHz, V/H polarization modes. Two polar orbiting satellites and the unit on the MSS would be needed to establish a database sufficient for studying monthly, daily and diurnal precipitation variations that are accurate for local regions. Realization of an effective system depends on the development of algorithms for discriminating between rainfall, snow, light rain and ocean background radiation patterns.

Spencer, R. W.↗

A three-mass tethered system for micro-g/variable-g applications

This paper describes a Space-Station attached tethered system for micro-g/variable-g applications. The system consists of three platforms: the Space Station, an end mass anchored at the end of a 10 km long kevlar tether and a micro-g/variable-g laboratory with the capability of crawling along the tether. Control strategies are devised for performing both the deployment and the station-keeping maneuvers of the system. Effective algorithms are identified for damping out the major vibrational modes.

Lorenzini, E. C.↗

Optical Interferometric Parallel Data Processor

Image data processed faster than in present electronic systems. Optical parallel-processing system effectively calculates two-dimensional Fourier transforms in time required by light to travel from plane 1 to plane 8. Coherence interferometer at plane 4 splits light into parts that form double image at plane 6 if projection screen placed there.

Breckinridge, J. B.↗

Use of the updated NASA Langley radio-controlled drop-model technique for high-alpha studies of the X-29A configuration

This paper presents an overview of the radio-controlled drop-model technique used for low-speed flight dynamics research at the NASA Langley Research Center. The overall test methodology is reviewed and the major elements of the system are discussed including model construction and equipment, the closed-loop control system, and the flight test facility. To illustrate the capabilities of the technique, selected results from an ongoing program to study the high-angle-of-attack flight dynamics of the X-29A configuration are reviewed. Three research areas are highlighted: motion prediction, control system effects, and motion analysis and modeling. Finally, several current upgrades to the overall technique are discussed along with the enhanced test capability that they will provide.

Fratello, David J.↗

Analysis of a rotating advanced-technology space station for the year 2025

An analysis is made of several aspects of an advanced-technology rotating space station configuration generated under a previous study. The analysis includes examination of several modifications of the configuration, interface with proposed launch systems, effects of low-gravity environment on human subjects, and the space station assembly sequence. Consideration was given also to some aspects of space station rotational dynamics, surface charging, and the possible application of tethers.

Queijo, M. J.↗

An improved external recycle reactor for determining gas-solid reaction kinetics

These improvements in the recycle system effectively eliminate initial concentration variation by two modifications: (1) a vacuum line connection to the recycle loop which permits this loop to be evacuated and then filled with the test gas mixture to slightly above atmospheric pressure; and (2) a bypass line across the reactor which permits the reactor to be held under vacuum while the rest of the recycle loop is filled with test gas. A three-step procedure for bringing the feed gas mixture into contact with the catalyst at time zero is described.

Miller, Irvin M.↗