Search NASA⌕ Search

SEARCH · Search NASA

Results for “V/STOL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

Longitudinal aerodynamic characteristics of a low-wing lift-fan transport including hover characteristics in and out of ground effect

The longitudinal aerodynamic characteristics of a six-fan, tip-driven (remote) lift-fan VTOL transport through transition were determined by an investigation conducted in the Langley V/STOL tunnel. Tests were also made with the large midspan lift-fan pods and lift-cruise fans removed to determine their their influence on the stability and control of the configuration. Data were obtained for a range of model height above ground.

Hoad, D. R.↗

Wind-tunnel results of the aerodynamic characteristics of a 1/8-scale model of a twin engine short-haul transport

A wind tunnel test was conducted in the Langley V/STOL tunnel to define the aerodynamic characteristics of a 1/8-scale twin-engine short haul transport. The model was tested in both the cruise and approach configurations with various control surfaces deflected. Data were obtained out of ground effect for the cruise configuration and both in and out of ground effect for the approach configuration. These data are intended to be a reference point to begin the analysis of the flight characteristics of the NASA terminal configured vehicle (TCV) and are presented without analysis.

Paulson, J. W., Jr.↗

NASA/Navy lift/cruise fan cost reduction studies

Cost reduction studies were performed for the LCF459 turbotip fan for application with the YJ97-GE-100 gas generator in a multimission V/STOL research and technology aircraft. A 20 percent cost reduction of the research configuration based on the original preliminary design was achieved. The trade studies performed and the results in the area of cost reduction and weight are covered. A fan configuration is defined for continuation of the program through the detailed design phase.

Source record↗

Study on steady state wind and turbulence environments

The structure of wakes and how this structure is related to the size and shape of buildings and other obstacles, and to ambient winds, was investigated. Mean values of natural atmospheric flow were obtained and used in conjunction with theoretical relationships developed by dimensional analysis to establish a model of the flow in the wake. Results indicate that conventional and V/STOL aircraft passing through the wake during takeoff and landing would experience not only a change in turbulence level, but also a change in mean wind speed of a magnitude roughly equivalent to that of the eddy components.

Brundidge, K. C.↗

Variable pitch fan system for NASA/Navy research and technology aircraft

Preliminary design of a shaft driven, variable-pitch lift fan and lift-cruise fan was conducted for a V/STOL Research and Technology Aircraft. The lift fan and lift-cruise fan employed a common rotor of 157.5 cm diameter, 1.18 pressure ratio variable-pitch fan designed to operate at a rotor-tip speed of 284 mps. Fan performance maps were prepared and detailed aerodynamic characteristics were established. Cost/weight/risk trade studies were conducted for the blade and fan case. Structural sizing was conducted for major components and weights determined for both the lift and lift-cruise fans.

Ryan, W. P.↗

Effect of rotor wake on aerodynamic characteristics of a 1/6 scale model of the rotor systems research aircraft

Tests were conducted in the Langley V/STOL tunnel to determine the effect of the main-rotor wake on the aerodynamic characteristics of the rotor systems research aircraft. A 1/6-scale model with a 4-blade articulated rotor was used to determine the effect of the rotor wake for the compound configuration. Data were obtained over a range of angles of attack, angles of sideslip, auxiliary engine thrusts, rotor collective pitch angles, and rotor tip-path plane angles for several main-rotor advance ratios. Separate results are presented for the forces and moments on the airframe, the wing, and the tail. An analysis of the test data indicates significant changes in the aerodynamic characteristics. The rotor wake increases the longitudinal static stability, the effective dihedral, and the lateral static stability of the airframe. The rotor induces a downwash on the wing. This downwash decreases the wing lift and increases the drag. The asymmetrical rotor wake induces a differential lift across the wing and a subsequent rolling moment. These rotor induced effects on the wing become smaller with increasing forward speed.

Mineck, R. E.↗

Pressure distributions on a 1- by 3-meter semispan wing with a nonstreamwise tip in subsonic flow

Pressure distributions on a 1- by 3-meter semispan wing with a tip that is streamwise at 0 deg sweep are presented. The tip becomes nonstreamwise as the wing is swept. At 0 deg sweep angle, the semispan wing has a taper ratio of 1.0 and NACA 0012 airfoil section contours. The test was conducted in the Langley V/STOL tunnel at a freestream dynamic pressure of 2.46 kPa. Pressure distributions are presented for sweep angles of 10, 20, 30, and 40 with an angle of attack range from -6 deg to 20 deg. The data are presented without analysis or discussion.

Yip, L. P.↗

Sources of low-level wind shear around airports

Some potential sources of low-level wind shear in and around airports and their likely effects are probed and analyzed. Wind shear over flat terrain with near-homogeneous surface properties (roughness, specific heat), the turning layer, shear flows over inhomogeneous terrain (airport + urban areas), thunderstorms, turbulent flowfields over bluff bodies (individual buildings), and recirculating wake flow downstream of three-dimensional block bodies are among the topics covered. Overshoot or undershoot of runways, and induced moments (pitch, roll, yaw) in takeoff and landing, and other potential hazards traceable to wind shear patterns at low heights are discussed, with emphasis on mean flow or steady-state wind shear (time-averaged, say 2-min averaged, wind fields). Wind tunnel studies and V/STOL operations are included in the study.

Fichtl, G. H.↗

Individual differences in pilot performance

Selected literature on individual differences in pilot performance is reviewed in order to indicate a possible direction for research. Approaches to studying pilot decision-making processes are discussed, with emphasis given to the wrong-model approach in which accident and incident data, or 'process tracing' provide experimental computational structures. Analysis of data from a simulator experiment on V/STOL zero-visibility landing performance suggests that the order of ranking of individual pilot's effectiveness varies with particular situations defined by combinations of tracking requirements (e.g., glide slope, localizer) and glide-slope segment, or speed requirements; the data are being further analyzed.

Murphy, M. R.↗

Technology outlook for aviation

Growth projections for aviation technology are put forth for a quarter-century ahead. Three main trends envisaged are towards: great efficiency and economy and longer range and endurance for subsonic aircraft; new generations of short-range fixed-wing craft and rotorcraft with versatile applicability; supersonic and hypersonic speeds. Improvements in lift/drag ratio, specific fuel consumption, structural weight factor, aerodynamic improvements (laminar flow control, increased wing aspect ratio, drag reduction for specified lift, propulsion efficiency, higher bypass ratios, composite structures) are discussed along with V/STOL, controllable twist rotors, circulation control rotors, variable-cycle engines, and higher structural efficiencies.

Roberts, L.↗

Directions in civil aviation 1980-2000

The following future directions in civil aviation are considered: (1) greater economy and efficiency in passenger and cargo air service at subsonic speeds, and improved utility and safety for general aviation, (2) greatly improved short haul air transportation using turbofan or turboprop aircraft, and subsequently, rotorcraft and V/STOL aircraft, and (3) supersonic, and ultimately hypersonic, air transportation for transoceanic long range flight. Attention is also given to new directions in research and technology.

Roberts, L.↗

The preliminary design of a lift-cruise fan airplane flight control system

This paper presents the preliminary design of a stability augmentation system for a NASA V/STOL research and technology airplane. This stability augmentation system is postulated as the simplest system that meets handling-quality levels for research and technology missions flown by NASA test pilots. The airplane studied in this report is a modified T-39 fitted with tilting lift/cruise fan nacelles and a nose fan. The propulsion system features a shaft that interconnects three variable-pitch fans and three powerplants. The mathematical modeling is based on pre-wind tunnel test estimated data. The selected stability augmentation system uses variable gains scheduled with airspeed. Failure analysis of the system illustrates the benign effect of engine failure. Airplane rate sensor failure must be solved with redundancy.

Gotlieb, P.↗

Experimental investigations of thrust vectoring systems for VTOL aircraft

This paper presents a summary of two technology programs sponsored by NASA to investigate the characteristics of two thrust vectoring schemes for V/STOL aircraft. The operational capability of the VTOL aircraft is dependent on maximum utilization of the installed thrust in both the cruise and powered lift modes of flight. An effective thrust vectoring system on the cruise propulsion unit is therefore essential to provide maximum payload in hover and STOL plus minimum specific fuel consumption in loiter and cruise. Introducing a high by-pass ratio fan system, augmenting the gas generator thrust, as the propulsion system for VTOL aircraft places increased significance on the performance of the relatively short coupled thrust vectoring systems. The two programs discussed herein include both large-scale and small-scale tests of a vectoring hood system with a vented, internal-lip and swivel nozzle systems. These tests indicated that a satisfactory thrust vectoring system can be developed.

Rolls, L. S.↗

Development of prediction techniques for multi-jet thermal ground flow fields and fountain formation

Avoiding detrimental ground interaction is important for practical V/STOL aircraft. This paper reports recent developments in a numerical method for estimating thermal ground footprints. Upwash and fountain formation for arbitrarily oriented jet arrangements is predicted. Flow asymmetry due to roll, pitch, differential thrust or ground inclination is included. The prediction methodology uses simple inviscid relations for energy and momentum conservation along with an empirical entrainment law, applied in independent sectors of the wall jet and upwash. Asymmetrical stagnation line prediction is compared with experiment. Detailed flow measurements for a three-jet interaction are also presented.

Siclari, M. J.↗

Study of the application of an implicit model-following flight controller to lift-fan VTOL aircraft

An implicit model-following flight controller is proposed. This controller is relatively simple in concept: it provides an input/output relationship that is approximately that of any selected second order system; it provides good gust alleviation; and it is self-trimming. The flight controller was applied to all axes of a comprehensive mathematical model of a lift-fan V/STOL transport. Power management controls and displays were designed to match the various modes of control provided by the flight controller. A piloted simulation was performed using a six degree of freedom simulator. The fixed-operating-point handling qualities throughout the powered lift flight envelope received pilot ratings of 3-1/2 or better. Approaches and vertical landings in IFR zero-zero conditions received pilot ratings varying from 2-1/2 to 4 depending on the type of approach and weather conditions.

Merrick, V. K.↗

Effect of design changes on aerodynamic and acoustic performance of translating-centerbody sonic inlets

An experimental investigation was conducted to determine the effect of design changes on the aerodynamic and acoustic performance of translating centerbody sonic inlets. Scale model inlets were tested in the Lewis Research Center's V/STOL wind tunnel. The effects of centerbody position, entry lip contraction ratio, diffuser length, and diffuser area ratio on inlet total pressure recovery, distortion, and noise suppression were investigated at static conditions and at forward velocity and angle of attack. With the centerbody in the takeoff position (retracted), good aerodynamic and acoustic performance was attained at static conditions and at forward velocity. At 0 deg incidence angle with a sound pressure level reduction of 20 dB, the total pressure recovery was 0.986. Pressure recovery at 50 deg was 0.981. With the centerbody in the approach position (extended), diffuser flow separation occurred at an incidence angle of approximately 20 deg. However, good performance was attained at lower angles. With the centerbody in the takeoff position the ability of the inlet to tolerate high incidence angles was improved by increasing the lip contraction ratio. However, at static conditions with the centerbody in the approach position, an optimum lip contraction ratio appears to exist, with both thinner and thicker lips yielding reduced performance.

Miller, B. A.↗

Review of US Navy VSTOL handling qualities requirements

Handling qualities requirements for V/STOL operations from small ships are considered in terms of the ship operating environment. Turbulence, wind over the deck, ship motion, visibility, and severe weather and sea conditions are among the factors discussed.

Hutchings, D. E.↗

Pilot centered requirements in control/display design

A method developed for predicting pilot opinion ratings for particular vehicles and tasks using optimal control pilot model is described and an outline of a flight director design procedure based upon the optimal control pilot model is given. Longitudinal and lateral control of a helicopter in hover and in a -6 deg constant ground speed-command landing approach are considered. Emphasis is placed on display design for optimum V/STOL control.

Hess, R. A.↗