Search NASA⌕ Search

SEARCH · Search NASA

Results for “Waveguide”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

Design and performance analysis of the DSS-13 beam waveguide antenna

A new 34 m research and development antenna is currently being constructed prior to introducing beam waveguide (BWG) antennas and Ka-band (32 GHz) frequencies into the NASA/JPL Deep Space Network. The new 34 m antenna, fed with either a center or bypass BWG, will lose less than 0.2 dB (excluding surface root mean square and mirror misalignment losses), as compared with a standard-fed Cassegrain antenna a X- (8.4 GHz) and Ka-bands. The antenna is currently under construction and is scheduled to be completed July 1990. Phase 1 of the project is for independent X- and Ka-band receive-only tests. Phase 2 of the project is for simultaneous S- (2.3 GHz) and X-band or X- and Ka-band operation, and the design is currently under way.

Veruttipong, T.↗
NASA NTRS1990

Reflector spillover loss of an open-ended rectangular and circular waveguide feed

An important and frequently used parameter in the design of a feed for a reflector antenna is the spillover loss. A set of spillover curves is presented for several common feeds, namely circular waveguides with TE11 or TE21 excitations, rectangular guides for the monopulse application, etc. The difference between two common methods of normalizing the feed input power is also discussed.

Lee, Shung WU↗
NASA NTRS1990

Constitutive parameter de-embedding using inhomogeneously-filled rectangular waveguides with longitudinal section modes

Constitutive parameter extraction from S parameter data using a rectangular waveguide whose cross section is partially filled with a material sample as opposed to being completely filled was examined. One reason for studying a partially filled geometry is to analyze the effect of air gaps between the sample and fixture for the extraction of constitutive parameters. Air gaps can occur in high temperature parameter measurements when the sample was prepared at room temperature. Single port and two port measurement approaches to parameter extraction are also discussed.

Park, A.↗
NASA NTRS1991

Coplanar waveguide feeds for phased array antennas

The design and performance is presented of the following Coplanar Waveguides (CPW) microwave distribution networks for linear as well as circularly polarized microstrip patches and dipole arrays: (1) CPW/Microstrip Line feed; (2) CPW/Balanced Stripline feed; (3) CPW/Slotline feed; (4) Grounded CPW/Balanced coplanar stripline feed; and (5) CPW/Slot coupled feed. Typical measured radiation patterns are presented, and their relative advantages and disadvantages are compared.

Simons, Rainee N.↗
NASA NTRS1991

A portable Ka-band front-end test package for beam-waveguide antenna performance evaluation. Part 1: Design and ground tests

A unique experimental method was used to test the beam waveguide (BWG) antenna at Deep Space Station (DDS) 13 in the Goldstone Deep Space Communications Complex near Barstow, California. The methodology involved the use of portable test packages to make measurements of operating noise temperatures and antenna efficiencies (as functions of antenna pointing angles) at the Cassegrain focal point and the final focal point located in a subterranean pedestal room. Degradations caused by the BWG mirror systems were determined by making comparisons of the measured parameters at the two focal points of the antenna. Previous articles were concerned with the design, performance characteristics, and test results obtained with an X-band test package operating at 32 GHz. Noise temperature measurement results are presented for the Ka-band test package in an on-the-ground test configuration.

Otoshi, T. Y.↗
NASA NTRS1991

A portable Ka-band front-end test package for beam-waveguide antenna performance evaluation. Part 2: Tests on the antenna

In part one of this article, a description was given of a Ka-band test package developed to enable testing of the Deep Space Station (DDS) 13 34-m beam-waveguide (BWG) antenna at 32 GHz. Test results were given for the Ka-band test package in an on-the-ground test configuration. This article is a companion article concerned with Ka-band test results for the test package in an on-the-antenna test configuration. Included are Ka-band zenith noise-temperature values, tipping-curve data, and subreflector test results obtained at the Cassegrain focal point, as well as at the final BWG focal point (located in a subterranean pedestal room). Test results show that, through the use of the Ka-band test package, the BWG antenna performance was successfully evaluated at Ka-band. The Ka-band test package operated well in all of the different antenna test configurations.

Otoshi, T. Y.↗
NASA NTRS1991

Wideband waveguide polarizer development for SETI

A wideband polarizer for the Deep Space Network (DSN) 34 meter beam waveguide antenna is needed for the Search for Extraterrestrial Intelligence (SETI) project. The results of a computer analysis of a wideband polarizer are presented.

Lee, P.↗
NASA NTRS1991

Optical waveguide formed by cubic silicon carbide on sapphire substrates

Optical confinement in beta silicon carbide (beta-SiC) thin films on sapphire substrate is demonstrated. Measurements are performed on waveguides formed by the mechanical transfer of thin beta-SiC films to sapphire. Recent results of epitaxial films of SiC on sapphire substrates attest to the technological viability of optoelectronic devices made from silicon carbide. Far-field mode patterns are shown. It is believed that this is the first step in validating a silicon carbide optoelectronic technology.

Tang, Xiao↗
NASA NTRS1991

Low loss waveguide four-port crossover circuit and its application for cross-slot antenna feed

A four-way crossover circuit using a cylindrical cavity with four rectangular input/output ports has been designed to feed a cross-slot antenna to achieve dual polarization. Because all the input and output circuits are waveguides, the network is especially useful for high power systems and millimeter wave applications. The crossover circuit exhibits a very low insertion loss and good isolation.

Chang, K.↗
NASA NTRS1991

High-Tc superconductor coplanar waveguide filter

Coplanar waveguide (CPW) low-pass filters made of YBa2Cu3O(7-delta) (YBCO) on LaAlO3 substrates, with dimensions suited for integrated circuits, were fabricated and packaged. A complete filter gives a true idea of the advantages and difficulties in replacing thin-film metal with a high-temperature superconductor in a practical circuit. Measured insertion losses in liquid nitrogen were superior to the loss of a similar thin-film copper filter throughout the 0- to 9.5-GHz passband. These results demonstrate the performance of fully patterned YBCO in a practical CPW structure after sealing in a hermetic package.

Chew, Wilbert↗
NASA NTRS1991

Coplanar waveguide feeds for phased array antennas

The design and performance is presented of the following coplanar waveguides (CPW) microwave distribution networks for linear as well as circularly polarized microstrip patches and dipole arrays: (1) CPW/microstrip line feed; (2) CPW/balanced stripline feed; (3) CPW/slotline feed; (4) grounded CPW/balanced coplanar stripline feed; and (5) CPW/slot coupled feed. Typical measured radiation patterns are presented, and their relative advantages and disadvantages are compared.

Simons, Rainee N.↗
NASA NTRS1992

Channelized-Coplanar-Waveguide PIN-Diode Switches

Three positive/intrinsic/negative (PIN-diode) reflective CPW (coplanar waveguide) switches demonstrated. First includes series-mounted diode to bridge gap in center strip conductor of CPW. Second includes pair of diodes to short center strip conductor to ground planes. Third includes diode to switch between band-pass filter and notch filter. Isolation exceeds 20 dB, while insertion loss is less than 1 dB.

Ponchak, G. E.↗
NASA NTRS1992

Superconductive Coplanar-Waveguide Filters

Coplanar-waveguide microwave low-pass filters based on thin films of high-critical-temperature superconductor YBa2Cu3O7 built and tested. Designed to provide passband of 0 to 9.5 GHz. Dimensions suitable for microwave integrated circuits and chosen to provide fairly stringent test of usefulness and practicality of design and of method of fabrication. Insertion loss less than filter made with copper.

Chew, Wilbert↗
NASA NTRS1991

A portable Ku-band front-end test package for beam-waveguide antenna performance evaluation

A 34-m beam-waveguide (BWG) antenna has been built a Deep Space Station 13 (DDS 13) in the Goldstone Deep Space Communications Complex. This antenna is designed to be efficient at X-, Ku-, and Ka-bands, and it is the first NASA tracking antenna to use a BWG design. The design of a Ku-band test package for the new BWG antenna at 11.7-12.2 GHz is presented. Results of linear polarization measurements with the test package on the ground are also presented. This report is the fifth in a series of articles concerned with test package design and performance.

Otoshi, T. Y.↗
NASA NTRS1991

A proposed far-field method for frequency-stability measurements on the DSS 13 beam-waveguide antenna

A method for measuring the frequency stability of the beam-waveguide (BWG) antenna at Deep Space Station 13 is presented. This method is relatively inexpensive and primarily utilizes equipment that is already available. Another desirable feature of the method is that a far-field signal will be used for the measurement. In concert with the goal of employing new technology developments, a fiber optic system will be used at 12 GHz to carry a reference antenna signal to the BWG antenna Ku-band test-package location in the pedestal room.

Otoshi, T. Y.↗
NASA NTRS1991

A novel noncontacting waveguide backshort for millimeter and submillimeter wave frequencies

A new noncontacting waveguide backshort was developed for millimeter and submillimeter wave frequencies. It employs a metallic bar with rectangular or circular holes. The size and spacing of the holes are adjusted to provide a periodic variation of the guide impedance on the correct length scale to give a large reflection of RF frequency power. This design is mechanically rugged and can be easily fabricated for millimeter wave frequencies above 300 GHz where conventional backshorts are difficult to fabricate. Model experiments were performed at 4 to 6 GHz to optimize the design. Values of reflected power greater than 95 percent over a 30 percent bandwidth were achieved. The design was scaled to WR-10 band (75 to 110 GHz) with comparably good results.

Mcgrath, W. R.↗
NASA NTRS1992

DSS-13 beam-waveguide antenna performance in the bypass mode

A new 34-meter beam-waveguide (BWG) antenna that contains two microwave paths, a centerline feed system, and a bypass feed system, was built at the Deep Space Station 13 (DDS 13) at Goldstone, California. Previous articles have described the test results from the evaluation of the centerline BWG feed system in the receive mode as well as the test package hardware used to perform these tests. The test results from the evaluation of the bypass BWG feed system on the DSS-13 antenna in the receive mode, including the operating noise-temperature and the antenna-area-efficiency measurements, are presented.

Stewart, S. R.↗