Search NASA⌕ Search

SEARCH · Search NASA

Results for “ab initio phasing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

Senary refractory high-entropy alloy HfNbTaTiVZr

Discovery of new single-phase high-entropy alloys (HEAs) is important to understand HEA formation mechanisms. The present study reports computational design and experimental validation of a senary HEA, HfNbTaTiVZr, in a body-centered cubic structure. The phase diagrams and thermodynamic properties of this senary system were modeled using the CALPHAD method. Its atomic structure and diffusion constants were studied using ab initio molecular dynamics simulations. Here, the microstructure of the as-cast HfNbTaTiVZr alloy was studied using X-ray diffraction and scanning electron microscopy, and the microsegregation in the as-cast state was found to qualitatively agree with the solidification predictions from CALPHAD. Supported by both simulation and experimental results, the HEA formation rules are discussed.

36 MATERIALS SCIENCE↗

Comprehensive Phase Diagrams of MoS 2 Edge Sites Using Dispersion-Corrected DFT Free Energy Calculations

A comprehensive set of surface phase diagrams addressing the catalytically relevant edges of the (100) surface of MoS 2 catalysts is developed using dispersion-corrected density functional theory and ab initio thermodynamic modeling. The results of the temperature-dependent, free energy-based thermodynamic model are presented over the full range of catalytically relevant temperatures and pressures, in addition to S- and H-coverages ranging from 0 to 100%. The results of this work allow for a full thermodynamic analysis to be performed at the conditions relevant to any promising reaction involving MoS 2 , ranging from hydrodesulfurization to dehydrogenation to electrocatalysis. Several methodological recommendations are discussed and implemented with the goal of improving the accuracy of the surface phase diagrams at minimal computational expense. A library of the most stable S- and H-adsorption modes is also developed so that linear scaling relationships can be used to correlate thermodynamic stability with kinetic activity. Applying the results to C–H bond activation of methane with a S 2 oxidant, here we predict S-coverages near 100% on the Mo- and S-edges to be thermodynamically favored and S monomers on edge sites with high S-coverages to be kinetically favorable. For H-abstraction on surface S atoms, the Mo-edge is also predicted to be more active than the S-edge.

36 MATERIALS SCIENCE↗

Thermodynamic prediction of glass formation tendency, cluster-in-jellium model for metallic glasses, ab initio tight-binding calculations, and new density functional theory development for systems with strong electron correlation

Solidification of liquid is a very rich and complicated field, although there is always a famous homogeneous nucleation theory in a standard physics or materials science text book. Depending on the material and processing condition, liquid may solidify to single crystalline, polycrystalline with different texture, quasi-crystalline, amorphous solid or glass (Glass is a kind of amorphous solid in general, which has short-range and medium-range order). Traditional oxide glass may easily be formed since the covalent directional bonded network is apt to be disturbed. In other words, the energy landcape of the oxide glass is so complicated that system need extremely long time to explore the whole configuration space. On the other hand, metallic liquid usually crystalize upon cooling because of the metallic bonding nature. However, Klement et.al., (1960) reported that Au-Si liquid underwent an amorphous or “glassy” phase transformation with rapid quenching. In recent two decades, bulk metallic glasses have also been found in several multicomponent alloys[Inoue et al., (2002)]. Both thermodynamic factors (e.g., free energy of various competitive phase, interfacial free energy, free energy of local clusters, etc.) and kinetic factors (e.g., long range mass transport, local atomic position rearrangement, etc.) play important roles in the metallic glass formation process. Metallic glass is fundamentally different from nanocrystalline alloys. Metallic glasses have to undergo a nucleation process upon heating in order to crystallize. Thus the short-range and medium-range order of metallic glasses have to be completely different from crystal. Hence a method to calculate the energetics of different local clusters in the undercooled liquid or glasses become important to set up a statistic model to describe metalllic glass formation. Scattering techniques like x-ray and neutron have widely been used to study the structues of metallic glasses. Meanwhile, computer simulation also plays an important role, as it may directly track the movement of every atom. Simulation time is a major limit for molecular dynamics, not only because of “slow” computer speed, but also because of the accumulation error in the numerical treatment of the motion equations. There is also a great concern about the reliability of the emperical potentials if using classical molecular dynamics. Ab initio methods based on density functional theory(DFT) do not have this problem, however, it suffers from small simulation cells and is more demanding computationally. When crystal phase is involved, size effect of the simulation cell is more pronounced since long-range elastic energy would be established. Simulation methods which are more efficient in computation but yet have similar reliability as the ab initio methods, like tight-binding method, are highly desirable. While the complexity of metallic glasses comes from the atomistic level, there is also a large field which deals with the complexity from electronic level. The only “ab initio” method applicable to solid state systems is density functional theory with local density approximation( LDA) or generalized gradient approximation(GGA) for the exchange-correlation energy. It is very successful for simple sp element, where it reaches an high accuracy for determining the surface reconstruction. However, there is a large class of materials with strong electron correlation, where DFT based on LDA or GGA fails in a fundamental way. An “ab initio” method which can generally apply to correlated materials, as LDA for simple sp element, is still to be developed. The thesis is prepared to address some of the above problems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ab Initio Study of the Effect of Mono-Vacancies on the Metastability of Ga-Stabilized δ-Pu

Most experimental studies on metallic Pu are on the room temperature monoclinic α-phase or the fcc Ga stabilized δ-phase. Stabilized δ-phase Pu-Ga alloys are metastable and exhibit a martensitic phase transformation to α’-phase at low temperatures, or applied shear, with concentrations lower than three atomic percent Ga. By using first principles, we explore the metastability of δ-phase by investigating the structural and electronic behavior induced by Ga alloying and by a mono-vacancy point defect. We find that a site substitutional Ga induces a tetragonal distortion in the lattice affected by hybridization of Ga 4p and Pu 6d states. With the addition of a mono-vacancy, a monoclinic or tetragonal distortion forms locally (dependent on its distance from Ga), and decoupling of the Pu 5f and 6d states and broadening of the 6d states occurs. This response enables hybridization of Pu 6d with the Ga 4p states affecting the mono-vacancy formation energy. Thus, stabilization of the fcc lattice correlates with hybridization of Pu 6d states with Ga 4p states, and this becomes more evident in the presence of a mono-vacancy.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Additively manufactured Ni-20Cr to V functionally graded material: Computational predictions and experimental verification of phase formations

Throughout this work, a database for the Cr-Ni-V system was constructed by modeling the binary Cr-V and ternary Cr-Ni-V systems using the CALPHAD approach aided by density functional theory (DFT)-based first-principles calculations and ab initio molecular dynamics (AIMD) simulations. To validate this new database, a functionally graded material (FGM) using Ni-20Cr and elemental V was fabricated using directed energy deposition additive manufacturing (DED AM) and experimentally characterized. The deposited Ni-20Cr was pure fcc phase, while increasing the amount of V across the gradient resulted in the formation of sigma phase, followed by the bcc phase. The experimentally measured phase data was compared with computational predictions made using a Cr-Ni-V thermodynamic database from the literature as well as the database developed in the present work. The newly developed database was shown to better predict the experimentally observed phases due to its accurate modeling of binary systems within the database and the ternary liquid phase, which is critical for accurate Scheil calculations.

36 MATERIALS SCIENCE↗

Ab initio DFT+U Study of He Atom Incorporation into UO2 Crystals

We present and discuss results of the density functional theory (DFT) for perfect UO2 crystals with He atoms in octahedral interstitial positions therein. We have calculated basic bulk crystal properties and He incorporation energies into the low temperature anti-ferromagnetic UO2 phase using several exchange–correlation functionals within the spin-polarized local density (LDA) and generalized gradient (GGA) approximations. In all DFT calculations we included the on-site correlation corrections using the Hubbard model (DFT+U approach). We analysed a potential crystalline symmetry reduction from tetragonal down to orthorhombic structure and confirmed the presence of the Jahn–Teller effect in a perfect UO2. We discuss also the problem of a conducting electronic state arising when He is placed into a tetragonal antiferromagnetic phase of UO2 commonly used in defect modelling. Consequently, we found a specific monoclinic lattice distortion which allowed us to restore the semiconducting state and properly estimate He incorporation energies. Unlike the bulk properties, the He incorporation energy strongly depends on several factors, including the supercell size, the use of spin polarization, the exchange–correlation functionals and on-site correlation corrections. We compare our results for the He incorporation with the previous shell model and ab initio DFT calculations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

ON THE FORMATION OF SILACYCLOPROPENYLIDENE (c-SiC{sub 2}H{sub 2}) AND ITS ROLE IN THE ORGANOSILICON CHEMISTRY IN THE INTERSTELLAR MEDIUM

Organosilicon species such as silicon carbide and silicon dicarbide are considered as key molecular building blocks in the chemical evolution of the interstellar medium and are associated with the formation of silicon-carbide dust grains in the outflow of circumstellar envelopes of carbon-rich asymptotic giant branch (AGB) stars. However, the formation mechanisms of even the simplest silicon-bearing organic molecules have remained elusive for decades. Here, we demonstrate in crossed molecular beam experiments combined with ab initio calculations that the silacyclopropenylidene molecule (c-SiC{sub 2}H{sub 2}) can be synthesized in the gas phase under single-collision conditions via the reaction of the silylidyne radical (SiH) with acetylene (C{sub 2}H{sub 2}). This system denotes the simplest representative of a previously overlooked reaction class, in which the formation of an organosilicon molecule can be initiated via barrierless and exoergic reactions of silylidyne radicals with hydrocarbon molecules in circumstellar envelopes of evolved carbon stars such as IRC+10216. Since organosilicon molecules like silacyclopropenylidene can be eventually photolyzed to carbon-silicon clusters such as silicon dicarbide (c-SiC{sub 2}), silacyclopropenylidene might even represent the missing link between simple molecular precursors and silicon-carbide-rich interstellar grains.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Candidate ferroelectrics via ab initio high-throughput screening of polar materials

Ferroelectrics are a class of polar and switchable functional materials with diverse applications, from microelectronics to energy conversion. Computational searches for new ferroelectric materials have been constrained by accurate prediction of the polarization and switchability with electric field, properties that, in principle, require a comparison with a nonpolar phase whose atomic-scale unit cell is continuously deformable from the polar ground state. For most polar materials, such a higher-symmetry nonpolar phase does not exist or is unknown. Here, we introduce a general high-throughput workflow that screens polar materials as potential ferroelectrics. We demonstrate our workflow on 1978 polar structures in the Materials Project database, for which we automatically generate a nonpolar reference structure using pseudosymmetries, and then compute the polarization difference and energy barrier between polar and nonpolar phases, comparing the predicted values to known ferroelectrics. Focusing on a subset of 182 potential ferroelectrics, we implement a systematic ranking strategy that prioritizes candidates with large polarization and small polar-nonpolar energy differences. To assess stability and synthesizability, we combine information including the computed formation energy above the convex hull, the Inorganic Crystal Structure Database id number, a previously reported machine learning-based synthesizability score, and ab initio phonon band structures. To distinguish between previously reported ferroelectrics, materials known for alternative applications, and lesser-known materials, we combine this ranking with a survey of the existing literature on these candidates through Google Scholar and Scopus databases, revealing ~130 promising materials uninvestigated as ferroelectric. Our workflow and large-scale high-throughput screening lays the groundwork for the discovery of novel ferroelectrics, revealing numerous candidates materials for future experimental and theoretical endeavors.

36 MATERIALS SCIENCE↗

Experimental Constraints on Solid Nitride Phases in Rocky Mantles of Reduced Planets and Implications for Observable Atmosphere Compositions

Abstract Astronomical surveys have discovered thousands of transiting exoplanets, revealing that rocky planets are common in the galaxy. A planet's interior chemistry is frequently inferred by average density, described by mass‐radius (M‐R) relationships. However, M‐R relationships give rise to non‐unique interpretations of a planet's interior composition, an issue that limits our ability to characterize far‐away worlds. We present experimental and density functional theoretical results addressing the influence of an ultra‐reducing (oxygen‐poor) interior chemistry on rocky mantle phases and discuss the possible implications for atmospheric observables. We show that silicon carbide (SiC) and molecular nitrogen (N 2 ) react to form solid silicon nitride (γ‐Si 3 N 4 ) at high pressures and high temperatures in a laser‐heated diamond‐anvil cell, consistent with ab initio computations. Si 3 N 4 remains stable under extreme conditions and when quenched to ambient conditions. As SiC is a common compound found under very reducing conditions, these results indicate that nitrogen may form solid phases in an oxygen‐poor rocky planet. If, by sequestering nitrogen in a planet's mantle, the distribution of nitrogen between a planet's interior and atmosphere is altered (i.e., a nitrogen‐rich mantle and nitrogen‐poor atmosphere), these results indicate that there may be atmospheric observables connected to the mantle‐redox state of a rocky planet besides the oxygen‐containing phases ubiquitous in exoplanet literature.

Daviau, Kierstin↗

Structure, dynamics and stability of water/scCO 2 /mineral interfaces from ab initio molecular dynamics simulations

Here, the interface between a solid and a complex multi-component liquid forms a unique reaction environment whose structure and composition can significantly deviate from either bulk or liquid phase and is poorly understood due the innate difficulty to obtain molecular level information. Feldspar minerals, as typified by the Ca-end member Anorthite, serve as prototypical model systems to assess the reactivity and ion mobility at solid/water-bearing supercritical fluid (WBSF) interfaces due to recent X-ray based measurements that provide information on water-film formation, and cation vacancies at these surfaces. Using density functional theory based molecular dynamics, which allows the evaluation of reactivity and condensed phase dynamics on equal footing, we report on the structure and dynamics of water nucleation and surface aggregation, carbonation and Ca mobilization under geologic carbon sequestration scenarios (T = 323 K and P = 90 bar). We find that water has a strong enthalpic preference for aggregation on a Ca-rich, O-terminated anorthite (001) surface, but entropy strongly hinders the film formation at very low water concentrations. Carbonation reactions readily occur at electron-rich terminal Oxygen sites adjacent to cation vacancies, when in contact with supercritical CO 2 . Cation vacancies of this type can form readily in the presence of a water layer that allows for facile and enthalpicly favorable Ca 2+ extraction and solvation. Apart from providing unprecedented molecular level detail of a complex three component (mineral, water and scCO 2 ) system), this work highlights the ability of modern capabilities of AIMD methods to begin to qualitatively and quantitatively address structure and reactivity at solid-liquid interfaces of high chemical complexity. This work was supported by the US Department of Energy, Office of Fossil Energy (M.-S. L., B. P. M. and V.-A. G.) and the Office of Basic Energy Science, Division of Chemical Sciences, Geosciences and Biosciences (R.R.), and performed at the Pacific Northwest National Laboratory (PNNL). PNNL is a multi-program national laboratory operated for DOE by Battelle. Computational resources were provided by PNNL’s Platform for Institutional Computing (PIC), the W. R. Wiley Environmental Molecular Science Laboratory (EMSL), a national scientific user facility sponsored by the Department of Energy’s Office of Biological and Environmental Research located at PNNL and the National Energy Research Scientific Computing Center (NERSC) at Lawrence Berkeley National Laboratory.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Universal tight binding model for chemical reactions in solution and at surfaces. II. Water

A revised water model intended for use in condensed phase simulations in the framework of the self consistent polarizable ion tight binding theory is constructed. The model is applied to water monomer, dimer, hexamers, ice, and liquid, where it demonstrates good agreement with theoretical results obtained by more accurate methods, such as DFT and CCSD(T), and with experiment. In particular, the temperature dependence of the self diffusion coefficient in liquid water predicted by the model, closely reproduces experimental curves in the temperature interval between 230 K and 350 K. In addition, and in contrast to standard DFT, the model properly orders the relative densities of liquid water and ice. A notable, but inevitable, shortcoming of the model is underestimation of the static dielectric constant by a factor of two. We demonstrate that the description of inter and intramolecular forces embodied in the tight binding approximation in quantum mechanics leads to a number of valuable insights which can be missing from ab initio quantum chemistry and classical force fields. These include a discussion of the origin of the enhanced molecular electric dipole moment in the condensed phases, and a detailed explanation for the increase of coordination number in liquid water as a function of temperature and compared with ice—leading to insights into the anomalous expansion on freezing. The theory holds out the prospect of an understanding of the currently unexplained density maximum of water near the freezing point.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Direct Visualization of Li Dendrite Effect on LiCoO 2 Cathode by In Situ TEM

Li dendrites are known to cause deterious, and in many cases catastrophic, effect on the performance of Li rechargeable batteries. However, the mechanistic failure mechanism of cathodes upon in contact with Li metal is far from clear. In this study, using in situ transmission electron microscopy, we directly visualize at an atomic scale the interaction of Li dendrites with well-defined, epitaxial thin films of LiCoO2, the most widely used cathode material. We show that a spontaneous and prompt chemical reaction is trigged once the Li contact is made, leading to expansion and amorphization of the LiCoO2 structure, with Li2O and Co metal being the final reaction products. A topotactic phase transition is identified close to the reaction front, resulting in the formation of CoO as a metastable intermediate. Dynamic structural and chemical imaging in combination with ab inito simulations reveal that a high density of antiphase grain boundaries are formed at the reaction front, which are critical for enabling the short-range topotactic reactions and long-range Li propagation. The fundamental insights are of general importance in mitigating Li dendrites related issues and guiding the design principle for more robust energy materials.

In situ transmission electron microscopy (TEM), Li↗

Surface Phase Stability of Fe 2 O 3 (001) in Hydrogen Reducing Environments: A DFT and XPS Analysis

Here, this study combines density functional theory (DFT) and ab initio thermodynamics calculations with X-ray photoelectron spectroscopy (XPS) investigations to identify the reduction properties of the Fe 2 O 3 (001) surface with implications for corrosion resistance, hydrogen transport, and energy safety. Ab initio thermodynamics modeling predicts fully hydroxylated surface stability across a broad range of pressures (1 × 10 –23 to 1 × 10 5 mbar) and temperatures below 700 K, consistent with previous experimental studies. Above 800 K, exposures to 1 × 10 –4 mbar H 2 , 1 × 10 –4 mbar O 2 , or 1 × 10 –4 mbar H 2 + 1 × 10 –4 mbar O 2 each yield unique XPS signals indicating a loss of −OH coverage, aligning with DFT predictions. Insight into the mechanism of reduction as a function of H 2 exposure is provided, as well as conditions that promote further reduction toward Fe 3 O 4 . Theoretical and experimental investigations indicate the ability to maintain the Fe 2 O 3 protective layer of iron oxides that have been exposed to H 2 environments by including trace amounts of aqueous O2.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Ab initio anharmonic thermodynamic properties of cubic Ca Si O 3 perovskite

We present an ab initio study of the thermodynamic properties of cubic CaSiO 3 perovskite (CaPv) over the pressure and temperature range of the Earth's lower mantle. We compute the anharmonic phonon dispersions throughout the Brillouin zone by utilizing the phonon quasiparticle approach, which characterizes the intrinsic temperature dependence of phonon frequencies and, in principle, captures full anharmonicity. Such temperature-dependent phonon dispersions are used to calculate ab initio free energy in the thermodynamic limit (N → ∞) within the framework of the phonon gas model. Accurate free energy calculations enable us to investigate cubic CaPv's thermodynamic properties, e.g., thermal expansivity, Grüneisen parameter, bulk modulus, heat capacity and thermal equation of state, where anharmonic effects are demonstrated. Furthermore, the present methodology provides an important theoretical approach for exploring phase boundaries, thermodynamic, and thermoelastic properties of strongly anharmonic materials at high pressures and temperatures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

AB Initio Study of the Structure and Spectroscopic Properties of Halogenated Thioperoxy Radicals

Thioperoxy (XSO or XOS) radicals exist in a variety of chemical environments, and they have as a consequence drawn some interest. HSO, an important species in the chemistry of the troposphere, has been examined both experimentally. The halogenated (X = F, Cl or Br) peroxy species and isovalent thioperoxy species have been studied less, but they too are potentially interesting because oxidized sulfur species and halogen sources are present in the atmosphere. Learning the fate of XSO and XOS radicals is important to understanding the atmospheric oxidation chemistry of sulfur compounds. Of these, FSO and ClSO are particularly interesting because they have been directly detected spectroscopically. Recent studies in our laboratory on the photochemistry of thionyl halides (X2SO; where X = F or Cl) have suggested new ways to generate XSO species. The laser-induced photodissociation of thionyl fluoride, F2SO, at 193 nm and thionyl chloride, ClSO, at 248 nm is characterized by a radical mechanism, X2SO -> XSO + X. The structure of FSO has been characterized experimentally by Endo et cd. employing microwave spectroscopy. Using the unrestricted Hartree-Fock (UHF) self-consistent field (SCF) method, Sakai and Morokuma computed the electronic structure of the ground (sup 2)A" and the first excited (sup 2)A' states of FSO. Electron correlation was not taken into account in their study. In a laser photodissociation experiment, Huber et al. identified ClSO mass spectromctrically. ClSO has also been detected in low temperature matrices by EPR and in the gas phase by far IR laser magnetic resonance. Although the structure of FSO is known in detail, the only study, experimental or theoretical, of CISO has been an ab initio HFSCF study by Hinchliffe. Electron correlation corrections were also excluded from this study. In order to better understand the isomerization and dissociation dynamics of the radical species, we have performed ab initio correlated studies of the potential energy surfaces (PES) of ClSO and its isomer ClOS at the QCISD(T)/6-31 G* level of theory. For FSO and FOS, more extensive QCISD/6-31 1G(2df) calculations have been possible, and the results are summarized here.

Munoz, Luis A.↗

Na{sub 2}Ge{sub 2}Se{sub 5}: A highly nonlinear optical material

We report an integrated experimental and theoretical study of the two-dimensional polar selenogermanate compound Na{sub 2}Ge{sub 2}Se{sub 5}, which exhibits strong nonlinear optical (NLO) second harmonic generation response in the visible and infrared region. The compound is type-I phase-matchable with a large SHG coefficient {chi}{sup (2)} Almost-Equal-To 290 pm V{sup -1}, which is the second highest among the phase-matchable NLO materials. It also performs as an NLO frequency mixer to produce radiation via difference frequency generation. The compound is optically transparent from the visible (0.521 {mu}m) to the far IR (18.2 {mu}m) and melts congruently. Ab initio density functional theory band structure calculations show that the unusually large second-order optical nonlinearity is attributed to the two-dimensional character of the crystal structure. Raman, IR and optical absorption spectroscopy, differential thermal analysis, NLO properties of derivatives of Na{sub 2}Ge{sub 2}Se{sub 4.55}Te{sub 0.45} and Na{sub 2}Ge{sub 1.64}Sn{sub 0.36}Se{sub 5} and thermal expansion behavior studies are also reported. - Graphical Abstract: Na{sub 2}Ge{sub 2}Se{sub 5} is a new second-order nonlinear optical material for IR applications. It is type-I phase-matchable with a large SHG coefficient {chi}{sup (2)} Almost-Equal-To 290 pm V{sup -1}, which is the second largest among the phase-matchable NLO materials. Highlights: Black-Right-Pointing-Pointer Na{sub 2}Ge{sub 2}Se{sub 5} is a new second-order nonlinear optical material for IR applications. Black-Right-Pointing-Pointer It is type-I phase-matchable. Black-Right-Pointing-Pointer Its SHG coefficient {chi}{sup (2)} Almost-Equal-To 290 pm V{sup -1} is the second largest among the phase-matchable NLO materials. Black-Right-Pointing-Pointer Its DFG performance allows the development of a multiple IR frequency source with tunability. Black-Right-Pointing-Pointer Ab initio density functional theory band structure calculations show that the unusually large second-order optical nonlinearity is attributed to the 2-D character of the crystal structure.

36 MATERIALS SCIENCE↗