Search NASA⌕ Search

SEARCH · Search NASA

Results for “active source”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

Study of the Thermal Neutron Spectrum of the W-Be Photoneutron Source of the INR RAS

The possibility of reconstructing the neutron flux density of a W-Be photoneutron source using neutron activation analysis of Ag, Mn, Fe, Mn, and Ti samples is considered. The use of simple functions as AE{sup –B}, describing particular regions of the spectrum, as a reconstruction option is discussed. The dependence of the deviation of the measured reaction rates on those calculated in this study on the parameters of approximating functions is investigated. The convergence of the reconstruction results is obtained by increasing the amount of experimental data. This reconstruction method can be used for the operational measurement of the thermal neutron flux density of the photoneutron source and for the optimization of the source parameters.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Corrective Action Investigation Plan for Corrective Action Unit 571: Area 9 Yucca Flat Plutonium Dispersion Sites, Nevada National Security Site, Nevada, Revision 0

CAU 571 is a grouping of sites where there has been a suspected release of contamination associated with nuclear testing. This document describes the planned investigation of CAU 571, which comprises the following corrective action sites (CASs): • 09-23-03, Atmospheric Test Site S-9F • 09-23-04, Atmospheric Test Site T9-C • 09-23-12, Atmospheric Test Site S-9E • 09-23-13, Atmospheric Test Site T-9D • 09-45-01, Windrows Crater These sites are being investigated because existing information on the nature and extent of potential contamination is insufficient to evaluate and recommend corrective action alternatives (CAAs). Additional information will be obtained by conducting a corrective action investigation before evaluating CAAs and selecting the appropriate corrective action for each CAS. The results of the field investigation will support a defensible evaluation of viable CAAs that will be presented in the investigation report. The sites will be investigated based on the data quality objectives (DQOs) developed on March 6, 2013, by representatives of the Nevada Division of Environmental Protection and the U.S. Department of Energy (DOE), National Nuclear Security Administration Nevada Site Office (now the Nevada Field Office). The DQO process was used to identify and define the type, amount, and quality of data needed to develop and evaluate appropriate corrective actions for CAU 571. The site investigation process will also be conducted in accordance with the Soils Activity Quality Assurance Plan, which establishes requirements, technical planning, and general quality practices to be applied to this activity. The potential contamination sources associated with CAU 571 CASs are from nuclear testing activities. The DQO process resulted in an assumption that total effective dose (TED) within a default contamination boundary exceeds the final action level (FAL) and requires corrective action. The presence and nature of contamination outside the default contamination boundaries at CAU 571 will be evaluated based on information collected from a field investigation. Radiological contamination will be evaluated based on a comparison of the TED at sample locations to the dose-based FAL. The TED will be calculated as the total of separate estimates of internal and external dose. Results from the analysis of soil samples will be used to calculate internal radiological dose. Thermoluminescent dosimeters placed at the center of each sample location will be used to measure external radiological dose. Chemical contamination will be evaluated by comparing soil sample results to the FAL. Appendix A provides a detailed discussion of the DQO methodology and the DQOs specific to each CAS.

54 ENVIRONMENTAL SCIENCES↗

Gamma ray cosmology: The extra galactic gamma spectrum and methods to detect the underlying source

The possible sources of extragalactic gamma rays and methods to distinguish the different sources are discussed. The sources considered are early universe decays and annihilation of Particles, active galactic nuclei (AGN) sources, and baryon-antibaryon annihilation in a baryon symmetric cosmology. The energy spectrum and possible angular fluctuations due to these sources are described.

Cline, David B.↗

High resolution optical and UV observations of the centers of NGC 1316 and NGC 3998 with the Hubble Space Telescope

B and UV high-resolution images obtained with Hubble Space Telescope (HST) Faint Object Camera reveal centrally increasing surface brightness and UV-bright point sources at the nuclei of the early-type galaxies NGC 1316 and NGC 3998. Model fitting of the surface brightness distribution dose not exclude a central flattening, which could however be the result of extinction and/or of improper evaluation of the point-source component. The present data, while not requiring the presence of central massive black holes in these two galaxies, make them possible candidates. Follow-up work is needed to study this point further. The presence of unresolved nuclei gives model-dependent support to this quest, if these sources are due to small Active Galactic Nuclei (AGN). These UV-bright sources could belong to the low-luminosity end of active galactic nuclear emission.

Fabbiano, G.↗

A Meeting on the AGN/Galaxy Connection

This grant was used for travel support of several junior astronomers to attend the meeting "The Actice Galactic Nuclei (AGN)/Normal Galaxy Connection", Session El.2 of the 32nd COSPAR Assembly held in Nagoya, Japan, 12-19 July 1998. This meeting included the contributions from both theoretical and observational astronomers to the following fundamental questions: What causes the activity in galaxies? What is the difference between normal and active galaxies? Which processes are responsible for fueling the AGN? Do all galaxies have central Black Holes? What is the difference between low and high luminosity AGN? The observational papers discussed themes like: the detection of the black hole at the nucleus of our Galaxy, as well as in other galaxies; results from surveys of AGN in local galaxies, the source of their activity and their cold gas content; the observations of quasar host galaxies; the properties of Ultraluminous Infrared Galaxies. These papers used data from ground based observatories and several space missions (e.g. ASCA, ROSAT, HST, ISO) in wavebands from radio through gamma-rays. The theoretical papers discussed issues like: mechanisms to fuel the AGN; the physics of the accretion process; the formation of black-holes, quasars and their jets.

Kinney, Anne↗

Summary Report of Mission Acceleration Measurement for STS-87: Launched November 19, 1997

Two accelerometer systems, the Orbital Acceleration Research Experiment and the Space Acceleration Measurement System, were used to measure and record the microgravity environment of the Orbiter Columbia during the STS-87 mission in November-December 1997. Data from two separate Space Acceleration Measurement System units were telemetered to the ground during the mission and data plots were displayed for investigators of the Fourth United States Microgravity Payload experiments in near real-time using the World Wide Web. Plots generated using Orbital Acceleration Research Experiment data (telemetered to the ground using a tape delay) were provided to the investigators using the World Wide Web approximately twelve hours after data recording. Disturbances in the microgravity environment as recorded by these instruments are grouped by source type: Orbiter systems, on-board activities, payload operations, and unknown sources. The environment related to the Ku-band antenna dither, Orbiter structural modes, attitude deadband collapses, water dump operations, crew sleep, and crew exercise was comparable to the effects of these sources on previous Orbiter missions. Disturbances related to operations of the Isothermal Dendritic Growth Experiment and Space Acceleration Measurement Systems that were not observed on previous missions are detailed. The effects of Orbiter cabin and airlock depressurization and extravehicular activities are also reported for the first time. A set of data plots representing the entire mission is included in the CD-ROM version of this report.

Rogers, Melissa J. B.↗

Summary Report of Mission Acceleration Measurement for STS-87, Launched November 19, 1997

Two accelerometer systems, the Orbital Acceleration Research Experiment and the Space Acceleration Measurement System, were used to measure and record the microgravity environment of the Orbiter Columbia during the STS-87 mission in November-December 1997. Data from two separate Space Acceleration Measurement System units were telemetered to the ground during the mission and data plots were displayed for investigators of the Fourth United States Microgravity Payload experiments in near real-time using the World Wide Web. Plots generated using Orbital Acceleration Research Experiment data (telemetered to the ground using a tape delay) were provided to the investigators using the World Wide Web approximately twelve hours after data recording. Disturbances in the microgravity environment as recorded by these instruments are grouped by source type: Orbiter systems, on-board activities, payload operations, and unknown sources. The environment related to the Ku-band antenna dither, Orbiter structural modes, attitude deadband collapses, water dump operations, crew sleep, and crew exercise was comparable to the effects of these sources on previous Orbiter missions. Disturbances related to operations of the Isothermal Dendritic Growth Experiment and Space Acceleration Measurement Systems that were not observed on previous missions are detailed. The effects of Orbiter cabin and airlock depressurization and extravehicular activities are also reported for the first time. A set of data plots representing the entire mission is included in the CD-ROM version of this report.

Rogers, Melissa J. B.↗

Development of a rapid-transit system for precision nuclear physics measurements

A Rapid Belt-driven Irradiated Target Transfer System, named RABITTS, was developed for use at the Triangle Universities Nuclear Laboratory. This system allows for cyclic activation with neutron or photon beams, and measurement of reaction products using γ-ray spectroscopy. Both a 1 meter and 10 meter transfer system have been developed with transit times as low as 0.4 and 1.0 seconds, respectively. The systems are deployed at the tandem accelerator laboratory for use with monoenergetic neutron beams, and at the High-Intensity γ-ray Source facility for activation using photon beams. A detailed characterization of the systems’ performance and sensitivity is presented. In order to produce the highest accuracy cross-section data, a model for calculating corrections to cyclic activation with variable beam flux is developed and presented. We have commissioned these systems by measuring 197m Au, where we report a measured half-life of 7.73 ± 0.05 s and a 197 Au(n, n') 197m Au isomer production cross of 628 ± 28 mb at neutron energy E n = 2.0 MeV. In addition, we measured 90m Zr, where we report a measured half-life of 799.7 ± 8.0 ms and a 90 Zr(n, n') 90m Zr isomer production cross of 180 ± 12 mb at E n = 4.6 MeV. Furthermore, these measured half-lives are in excellent agreement with the evaluated values and the cross-section measurements are performed at previously unmeasured incident neutron energies.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Gulf of Mexico Health and Air Quality: Using NASA Earth Observations to Identify Potential Methane Sources for Improved Monitoring of Offshore Oil & Gas Activity in the Gulf of Mexico

The extraction, production, and transportation of oil and gas is a leading contributor to anthropogenic methane emissions via activities such as flaring and venting. The Bureau of Ocean and Energy Management (BOEM) has air quality jurisdiction offshore in the Gulf of Mexico and drafts regulations for criteria pollutants, while the Bureau of Safety and Environmental Enforcement (BSEE) enforces these regulations. Additionally, the non-profit organization SkyTruth monitors natural resources, including methane. BOEM, BSEE, and SkyTruth have partnered with NASA DEVELOP to use Earth observations to identify potential offshore methane sources in the Gulf of Mexico and to validate reported flaring activity. This information will allow BOEM and BSEE to make informed regulations regarding air pollution. Here, we cross-referenced BOEM infrastructure data with Suomi National Polar-orbiting Partnership (NPP) Visible Infrared Radiometer Suite (VIIRS) Nightfire data to validate operator-reported flaring. Sentinel-5p TROPOspheric Monitoring Instrument (TROPOMI) pollutant concentrations were used to validate VIIRS-detected flaring outside of the Gulf of Mexico where operator-reported data is unavailable. Using these methods, we identified the locations of offshore oil and gas infrastructure with known episodic flaring and venting in 2017 in the Gulf of Mexico, as well as offshore of South America and West Africa in 2021. Drawing upon retrieval methods used to detect onshore methane emissions, we proposed an analogous method utilizing sunglint to illuminate methane plumes over the ocean using Sentinel-2 Multispectral Imager (MSI) imagery. We detected two potential methane plumes – one at the Constitution complex in the Gulf of Mexico in July 2017 and one off the Coast of Lagos, West Africa, in July 2021.

Kate Howell↗

Functional Performance of Pyrovalves

Following several flight and ground test failures of spacecraft systems using single-shot, 'normally closed' pyrotechnically actuated valves (pyrovalves), a government/industry cooperative program was initiated to assess the functional performance of five qualified designs. The goal of the program was to improve performance-based requirements for the procurement of pyrovalves. Specific objectives included the demonstration of performance test methods, the measurement of 'blowby' (the passage of gases from the pyrotechnic energy source around the activating piston into the valve's fluid path), and the quantification of functional margins for each design. Experiments were conducted in-house at NASA on several units each of the five valve designs. The test methods used for this program measured the forces and energies required to actuate the valves, as well as the energies and the pressures (where possible) delivered by the pyrotechnic sources. Functional performance ranged widely among the designs. Blowby cannot be prevented by o-ring seals; metal-to-metal seals were effective. Functional margin was determined by dividing the energy delivered by the pyrotechnic sources in excess to that required to accomplish the function by the energy required for that function. All but two designs had adequate functional margins with the pyrotechnic cartridges evaluated.

Bement, Laurence J.↗

Functional performance of pyrovalves

Following several flight and ground test failures of spacecraft systems using single-shot, 'normally closed' pyrotechnically actuated valves (pyrovalves), a Government/Industry cooperative program was initiated to assess the functional performance of five qualified designs. The goal of the program was to provide information on functional performance of pyrovalves to allow users the opportunity to improve procurement requirements. Specific objectives included the demonstration of performance test methods, the seating; these gases/particles entered the fluid path of measurement of 'blowby' (the passage of gases from the pyrotechnic energy source around the activating piston into the valve's fluid path), and the quantification of functional margins for each design. Experiments were conducted at NASA's Langley Research Center on several units for each of the five valve designs. The test methods used for this program measured the forces and energies required to actuate the valves, as well as the energies and the pressures (where possible) delivered by the pyrotechnic sources. Functional performance ranged widely among the designs. Blowby cannot be prevented by o-ring seals; metal-to-metal seals were effective. Functional margin was determined by dividing the energy delivered by the pyrotechnic sources in excess to that required to accomplish the function by the energy required for that function. Two of the five designs had inadequate functional margins with the pyrotechnic cartridges evaluated.

Bement, Laurence J.↗

SEARCHES FOR TIME-DEPENDENT NEUTRINO SOURCES WITH ICECUBE DATA FROM 2008 TO 2012

In this paper searches for flaring astrophysical neutrino sources and sources with periodic emission with the IceCube neutrino telescope are presented. In contrast to time-integrated searches, where steady emission is assumed, the analyses presented here look for a time-dependent signal of neutrinos using the information from the neutrino arrival times to enhance the discovery potential. A search was performed for correlations between neutrino arrival times and directions, as well as neutrino emission following time-dependent light curves, sporadic emission, or periodicities of candidate sources. These include active galactic nuclei, soft γ-ray repeaters, supernova remnants hosting pulsars, microquasars, and X-ray binaries. The work presented here updates and extends previously published results to a longer period that covers 4 years of data from 2008 April 5 to 2012 May 16, including the first year of operation of the completed 86 string detector. The analyses did not find any significant time-dependent point sources of neutrinos, and the results were used to set upper limits on the neutrino flux from source candidates.

79 ASTRONOMY AND ASTROPHYSICS↗

eROSITA Final Equatorial-Depth Survey (eFEDS) eFEDS X-ray view of WERGS radio galaxies selected by the Subaru/HSC and VLA/FIRST survey

We constructed the eROSITA X-ray catalog of radio galaxies discovered by the WERGS survey, made by cross-matching the wide area Subaru/Hyper Suprime-Cam (HSC) optical survey and VLA/FIRST 1.4 GHz radio survey. We report finding 393 eROSITA detected radio galaxies in the 0.5-2 keV band in the eFEDS field covering 140 deg 2 . Thanks to the wide and medium depth eFEDS X-ray survey down to f 0.5 - 2 keV = 6.5 × 10 -15 erg s -1 cm -2 , the sample contains the rare and most X-ray luminous radio galaxies above the knee of the X-ray luminosity function, spanning 44 < log(L 0.5-2 keV (abs,corr) /erg s -1 ) < 46.5 at 1 < z < 4. The sample also contains the sources around and below the knee for the sources 41 < log(L 0.5-2 keV (abs,corr) /erg s -1 ) < 45 at z < 1. Based on the X-ray properties obtained by the spectral fitting, 37 sources show obscured active galactic nucleus (AGN) signatures with log(N H /cm -2 ) > 22. These obscured and radio AGN reside in 0.4 < z < 3.2, indicating that they are obscured counterparts of the radio-loud quasar, which were missed in the previous optical quasar surveys. By combining radio and X-ray luminosities, we also investigated the jet production efficiency η jet = η rad P jet /L AGN,bol by utilizing the jet power of P jet . We find that there are 14 sources with extremely high jet production efficiency at η jet ≈ 1. This high η jet value might be a result of the decreased radiation efficiency of η rad < 0.1, due to the low accretion rate for those sources, and/or of the boosting due to the decline of L AGN,bol by a factor of 10-100 by keeping P jet constant in the previous Myr, indicating the experience of the AGN feedback. Finally, inferring the BH masses from the stellar mass, we find that X-ray luminous sources show the excess of the radio emission with respect to the value estimated from the fundamental plane. This radio emission excess cannot be explained by the Doppler boosting alone, and therefore the disk–jet connection of X-ray luminous eFEDS-WERGS is fundamentally different from the conventional fundamental plane which mainly covers the low-accretion regime.

79 ASTRONOMY AND ASTROPHYSICS↗

Antifungal and Phytotoxic Activities of Isolated Compounds from Helietta parvifolia Stems

The identification of natural and environmentally friendly pesticides is a key area of interest for the agrochemical industry, with many potentially active compounds being sourced from numerous plant species. In this study, we report the bioassay-guided isolation and identification of phytotoxic and antifungal compounds from the ethyl acetate extract of Helietta parvifolia stems. We identified eight compounds, consisting of two coumarins and six alkaloids. Among these, a new alkaloid, 2-hydroxy-3,6,7-trimethoxyquinoline-4-carbaldehyde (6), was elucidated, along with seven known compounds. The phytotoxicity of purified compounds was evaluated, and chalepin (4) was active against Agrostis stolonifera at 1 mM with 50% inhibition of seed germination and it reduced Lemna pausicotata (duckweed) growth by 50% (IC50) at 168 μM. Additionally, we evaluated the antifungal activity against the fungal plant pathogen Colletotrichum fragariae using a thin-layer chromatography bioautography assay, which revealed that three isolated furoquinoline alkaloids (flindersiamine (3), kokusagenine (7), and maculine (8)) among the isolated compounds had the strongest inhibitory effects on the growth of C. fragariae at all tested concentrations. Our results indicate that these active natural compounds, i.e., (3), (4), (7), and (8), could be scaffolds for the production of more active pesticides with better physicochemical properties.

59 BASIC BIOLOGICAL SCIENCES↗

Study of Electromagnetic Interactions in the MicroBooNE Liquid Argon Time Projection Chamber

This thesis presents results on the study of electromagnetic (EM) activity in the MicroBooNE Liquid Argon Time Projection Chamber (LArTPC) neutrino detector. The LArTPC detector technology provides bubble-chamber like information on neutrino interaction final states, necessary to perform precision measurements of neutrino oscillation parameters. Accelerator-based oscillation experiments heavily rely on the appearance channel ! e to make such measurements. Identifying and reconstructing the energy of the outgoing electrons from such interactions is therefore crucial for their success. This work focuses on two sources of EM activity: Michel electrons in the 10-50 MeV energy range, and photons from 0 decay in the 30-300 MeV range. Studies of biases in the energy reconstruction measurement, and energy resolution are performed. The impact of shower topology at different energies is discussed, and the importance of thresholding and other reconstruction effects on producing an asymmetric and biased energy measurement are highlighted. This work further presents a study of the calorimetric separation of electrons and photons with a focus on the shower energy dependence of the separation power.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

The KM3NeT Consortium and the northern hemisphere neutrino telescope

The KM3NeT Consortium is currently carrying on a research and development activity to build a cubic kilometerscale neutrino telescope in the deep Mediterranean Sea. The KM3NeT Consortium follows on from the NEMO and NESTOR pilot projects, which have produced several prototypes and the ANTARES collaboration, which has built and is operating a 0.1 cubic kilometer volume deep-sea neutrino telescope. The KM3NeT Mediterranean neutrino telescope will complement the Antarctic Icecube observatory, allowing the complete survey of the sky using neutrinos as a probe. The main physics goals of KM3NeT include the detection of neutrinos from astrophysical sources such as active galactic nuclei, supernova remnants and γ-ray bursts as well as the search for new physics, such as neutrino signals from neutralino annihilation. To achieve the best performance, an extensive optimisation process is underway, looking for the best geometrical configuration of the detector for maximum sensitivity, and evaluating the most reliable technical solutions to allow long-term, low-maintenance operations.

79 ASTRONOMY AND ASTROPHYSICS↗

CarbonSAFE Illinois - Macon County

CarbonSAFE Illinois is a a Feasibility study to develop an established geologic storage complex in Macon County, Illinois, for commercial-scale storage of industrially sourced CO2. Feasibility activities are focused on the Mt. Simon Storage Complex; a step-out well will be drilled near existing storage sites (i.e., the Midwest Geological Sequestration Consortium’s Illinois Basin – Decatur Project and the Illinois Industrial Carbon Capture and Storage Project) to further establish commercial viability of this complex and to evaluate EOR potential in a co-located oil-field trend. The Archer Daniels Midland facility (ethanol plant), City Water, Light, and Power in Springfield, Illinois (coal-fired power station), and other regional industries are potential sources of anthropogenic CO2 for storage at this complex. Site feasibility will be evaluated through drilling results, static and dynamic modeling, and quantitative risk assessment. Both studies will entail stakeholder engagement, consideration of infrastructure requirements, existing policy, and business models. Project data will help calibrate the National Risk Assessment Partnership (NRAP) Toolkit to better understand the risks of commercial-scale carbon storage.

Whittaker, Steve↗

SISTec: Mathematical Calibration of Large Clearance Monitors - 18265

One major path for clearance of large amount of waste arising from the decommission of nuclear power plants is based on measurement with large clearance monitors (also known as free release measurement facilities). These devices utilize multi-detector plastic scintillator arrays (large clearance monitors can consist of up to 24 plastic scintillators) to offer both, extremely low minimum detectable activities (MDA) and short measurement times for waste packages weighing up to one metric ton. However, a major problem with these devices is to obtain nuclide specific efficiencies, especially for geometrically complex large waste packages. Normal procedure for estimating the efficiency is to device dummy waste packages and attach point sources with well-known activities to unfavourable positions in these packages. In accordance with this procedure, calibration factors can be derived in a radiological conservative way. Devising such test dummies is not always possible and the procedure is prone to generating large measurement uncertainties. In this publication, we propose a new method to derive calibration factors by means of the Los Alamos National Laboratory (LANL) simulation tool Monte Carlo N-Particle (MCNP) and a statistical-phenomenological model for the detector characterization. In a multi-step approach, first the detector response for a distribution of activity in a waste package is calculated and subsequently the detectors are mathematically characterized. Applying state of the art statistical and optimizing procedures, parameters for the detector response are derived in a self-consistent way. This also allows to rigorously propagate the uncertainties to the final calculated calibration factors according to the Guide to the Expression of Uncertainty in Measurement (GUM supplement 1). To validate the derived parameters for the detector characterization a minimally invasive experimental setup was devised and installed into the large clearance monitor. It consisted of an aluminum swivel arm which could position point sources to the relevant coordinates. The so collected measurement data not only allowed to investigate the precision of the calculated calibration factors, but also to probe the location of concentrated activity sources in the waste package. Furthermore, data on measurements with dummy waste packages were collected to test the reproducibility of well-known calibration factors. We present the software tool SIStec, which will provide an intuitive user-interface to generate and simulate waste package models and execute the above-mentioned method. Using SIStec, different scenarios for the distribution of activity in the waste package can be probed. This will also allow to optimize the clearance process on various levels. For example, measurement time for pre-measurements can be reduced in exchange for unfavourable calibration factors, which would still allow to meet the regulator limits for clearance. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗