Search NASA⌕ Search

SEARCH · Search NASA

Results for “atomistic simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

Development of a deep machine learning interatomic potential for metalloid-containing Pd-Si compounds

Interatomic potentials based on neural-network machine learning (ML) approach to address the long-standing challenge of accuracy versus efficiency in molecular-dynamics simulations have recently attracted a great deal of interest. In this work, utilizing Pd-Si system as a prototype, we extend the development of neural-network ML potentials to compounds exhibiting various types of bonding characteristics. The ML potential is trained by fitting to the energies and forces of both liquid and crystal structures first-principles calculations based on density-functional theory (DFT). We show that the generated ML potential captures the structural features and motifs in Pd 82 Si 18 and Pd 75 Si 25 liquids more accurately than the existing interatomic potential based on embedded-atom method (EAM). The ML potential also describes the solid-liquid interface of these systems very well. Moreover, while the existing EAM potential fails to describe the relative energies of various crystalline structures and predict wrong ground-state structures at Pd 3 Si and Pd 9 Si 2 composition, the developed ML potential predicts correctly the ground-state structures from genetic algorithm search. The efficient ML potential with DFT accuracy from our study will provide a promising scheme for accurate atomistic simulations of structures and dynamics of complex Pd-Si system.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Visualization and validation of twin nucleation and early-stage growth in magnesium

The abrupt occurrence of twinning when Mg is deformed leads to a highly anisotropic response, making it too unreliable for structural use and too unpredictable for observation. Here, we describe an in-situ transmission electron microscopy experiment on Mg crystals with strategically designed geometries for visualization of a long-proposed but unverified twinning mechanism. Combining with atomistic simulations and topological analysis, we conclude that twin nucleation occurs through a pure-shuffle mechanism that requires prismatic-basal transformations. Also, we verified a crystal geometry dependent twin growth mechanism, that is the early-stage growth associated with instability of plasticity flow, which can be dominated either by slower movement of prismatic-basal boundary steps, or by faster glide-shuffle along the twinning plane. The fundamental understanding of twinning provides a pathway to understand deformation from a scientific standpoint and the microstructure design principles to engineer metals with enhanced behavior from a technological standpoint.

36 MATERIALS SCIENCE↗

Formation of nanotwin networks during high-temperature crystallization of amorphous germanium

Germanium is an extremely important material used for numerous functional applications in many fields of nanotechnology. In this paper, we study the crystallization of amorphous Ge using atomistic simulations of critical nano-metric nuclei at high temperatures. We find that crystallization occurs by the recurrent transfer of atoms via a diffusive process from the amorphous phase into suitably-oriented crystalline layers. We accompany our simulations with a comprehensive thermodynamic and kinetic analysis of the growth process, which explains the energy balance and the interfacial growth velocities governing grain growth. For the <111> crystallographic orientation, we find a degenerate atomic rearrangement process, with two zero-energy modes corresponding to a perfect crystalline structure and the formation of a Σ3 twin boundary. Continued growth in this direction results in the development a twin network, in contrast with all other growth orientations, where the crystal grows defect-free. This particular mechanism of crystallization from amorphous phases is also observed during solid-phase epitaxial growth of <111> semiconductor crystals, where growth is restrained to one dimension. Lastly, we calculate the equivalent X-ray diffraction pattern of the obtained nanotwin networks, providing grounds for experimental validation.

36 MATERIALS SCIENCE↗

Detachment of semiflexible polymer chains from a substrate: A molecular dynamics investigation

Using Molecular Dynamics simulations, we study the force-induced detachment of a coarse-grained model polymer chain from an adhesive substrate. One of the chain ends is thereby pulled at constant speed off the attractive substrate and the resulting saw-tooth profile of the measured mean force 〈f〉 vs height D of the end-segment over the plane is analyzed for a broad variety of parameters. It is shown that the observed characteristic oscillations in the 〈f〉-D profile depend on the bending and not on the torsional stiffness of the detached chains. Allowing for the presence of hydrodynamic interactions (HI) in a setup with explicit solvent and dissipative particle dynamics-thermostat, rather than the case of Langevin thermostat, one finds that HI have little effect on the 〈f〉-D profile. Also the change of substrate affinity with respect to the solvent from solvophilic to solvophobic is found to play negligible role in the desorption process. In contrast, a changing ratio ε{sub s}{sup B}/ε{sub s}{sup A} of the binding energies of A- and B-segments in the detachment of an AB-copolymer from adhesive surface strongly changes the 〈f〉-D profile whereby the B-spikes vanish when ε{sub s}{sup B}/ε{sub s}{sup A}<0.15. Eventually, performing an atomistic simulation of (bio)-polymers, we demonstrate that the simulation results, derived from our coarse-grained model, comply favorably with those from the all-atom simulation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The role of stacking fault tetrahedra on void swelling in irradiated copper

Abstract A long-standing and critical issue in the field of irradiated structural materials is that void swelling is significantly higher in face-centered cubic-structured (fcc) materials (1% dpa −1 ) as compared to that of body-centered cubic-structured (bcc) materials (0.2% dpa −1 ). Despite extensive research in this area, the underlying mechanism of the difference in swelling resistance between these two types of materials is not yet fully understood. Here, by combining atomistic simulations and STEM imaging, we find stacking fault tetrahedra (SFTs) are the primary cause of the high swelling rate in pure fcc copper. We reveal that SFTs in fcc copper are not neutral sinks, different from the conventional knowledge. On the contrary, they are highly biased compared to other types of sinks because of the SFT-point defect interaction mechanism. SFTs show strong absorption of mobile self-interstitial atoms (SIAs) from the faces and vertices, and weak absorption of mobile vacancies from the edges. We compare the predicted swelling rates with experimental findings under varying conditions, demonstrating the distinct contributions of each type of sink. These findings will contribute to understanding the swelling of irradiated structural materials, which may facilitate the design of materials with high swelling resistance.

36 MATERIALS SCIENCE↗

Fundamental Mechanisms Driving the Amorphous to Crystalline Phase Transformation

Phase transformations are ubiquitous, fundamental phenomena that lie at the heart of many structural, optical and electronic properties in condensed matter physics and materials science. Many transformations, especially those occurring under extreme conditions such as rapid changes in the thermodynamic state, are controlled by poorly understood processes involving the nucleation and quenching of metastable phases. Typically these processes occur on time and length scales invisible to most experimental techniques ({micro}s and faster, nm and smaller), so our understanding of the dynamics tends to be very limited and indirect, often relying on simulations combined with experimental study of the ''time infinity'' end state. Experimental techniques that can directly probe phase transformations on their proper time and length scales are therefore key to providing fundamental insights into the whole area of transformation physics and materials science. LLNL possesses a unique dynamic transmission electron microscope (DTEM) capable of taking images and diffraction patterns of laser-driven material processes with resolution measured in nanometers and nanoseconds. The DTEM has previously used time-resolved diffraction patterns to quantitatively study phase transformations that are orders of magnitude too fast for conventional in situ TEM. More recently the microscope has demonstrated the ability to directly image a reaction front moving at {approx}13 nm/ns and the nucleation of a new phase behind that front. Certain compound semiconductor phase change materials, such as Ge{sub 2}Sb{sub 2}Te{sub 5} (GST), Sb{sub 2}Te and GeSb, exhibit a technologically important series of transformations on scales that fall neatly into the performance specifications of the DTEM. If a small portion of such material is heated above its melting point and then rapidly cooled, it quenches into an amorphous state. Heating again with a less intense pulse leads to recrystallization into a vacancy-stabilized metastable rock salt structure. Each transformation takes {approx}10-100 ns, and the cycle can be driven repeatedly a very large number of times with a nanosecond laser such as the DTEM's sample drive laser. These materials are widely used in optical storage devices such as rewritable CDs and DVDs, and they are also applied in a novel solid state memory technology - phase change memory (PCM). PCM has the potential to produce nonvolatile memory systems with high speed, extreme density, and very low power requirements. For PCM applications several materials properties are of great importance: the resistivities of both phases, the crystallization temperature, the melting point, the crystallization speed, reversibility (number of phase-transformation cycles without degradation) and stability against crystallization at elevated temperature. For a viable technology, all these properties need to have good scaling behavior, as dimensions of the memory cells will shrink with every generation. In this LDRD project, we used the unique single-shot nanosecond in situ experimentation capabilities of the DTEM to watch these transformations in GST on the time and length scales most relevant for device applications. Interpretation of the results was performed in conjunction with atomistic and finite-element computations. Samples were provided by collaborators at IBM and Stanford University. We observed, and measured the kinetics of, the amorphous-crystalline and melting-solidification transitions in uniform thin-film samples. Above a certain threshold, the crystal nucleation rate was found to be enormously high (with many nuclei appearing per cubic {micro}m even after nanosecond-scale incubation times), in agreement with atomistic simulation and consistent with an extremely low nucleation barrier. We developed data reduction techniques based on principal component analysis (PCA), revealing the complex, multi-dimensional evolution of the material while suppressing noise and irrelevant information. Using a novel specimen geometry, we also achieved repeated switching between the amorphous and crystalline phases enabling in situ study of structural change after phase cycling, which is relevant to device performance. We also observed the coupling between the phase transformations and the evolution of morphology on the nanometer scale, revealing the gradual development of striations in uniform films and preferential melting at sharp edges in laser-heated nanopatterned GST. This nonuniform melting, interpreted through simulation as being a direct result of geometrical laser absorption effects, appears to be responsible for a marked loss in morphological stability even at moderate laser intensities and may be an important factor in the longevity of nanostructured phase change materials in memory applications.

36 MATERIALS SCIENCE↗

Energy Storage in Metallic Glasses via Flash Annealing

Abstract When the temperature rises in a kinetically frozen and out‐of‐equilibrium system, such as a structural glass, thermal activation usually drives a relaxation to a lower enthalpy state. This is the essence of the ubiquitous thermal ageing of glassy materials below the glass transition temperature. Here, it is shown that an ultrafast temperature rise without subsequent quenching can elevate the system to a higher enthalpy state, thereby erasing the relaxation history. The key of this temperature‐driven rejuvenation is a fast‐heating rate (flash annealing) that brings the glass into a temperature regime above the glass transition within less than a millisecond. Here, the structure is entropically driven towards the liquid state, lowering its free energy, but raising its enthalpy. Subsequent cooling freezes the increased enthalpy before the liquid state is reached, thereby leading to a global energy storage. This ultrafast rejuvenation process is demonstrated for a Zr‐based metallic glass, combining calorimetry, fast in‐situ X‐ray diffraction, and atomistic simulations, showing a tenfold increase in stored enthalpy via flash annealing.

Küchemann, Stefan↗

Conformational Domain Wall Switch

Domain walls in ferroelectric materials have tantalizing potential in disruptive memory and reconfigurable nanoelectronics technologies. Here, a ferroelectric domain wall switch with three distinct addressable resistance states is demonstrated. The device operation hinges on fully controllable and reversible conformational changes of the domain wall. As validated by atomistic simulations consistent with the experiments, using electric field, the shape—and hence the charge state—of the domain wall and ultimately its conduction are altered. Sequential nanoscale transitions of the walls are visualized directly using stroboscopic-piezoresponse force microscopy and Kelvin probe microscopy. In this work, anisotropic head-to-head domain wall injection, stabilized by the majority carrier type of the ferroelectric, BiFeO 3 , is identified as the key factor that enables conformational control.

36 MATERIALS SCIENCE↗

Stabilizing Nickel‐Rich Cathodes in Aqueous Process through Nanocellulose as Water Barrier

Nickel-rich LiNi 0.8 Co 0.1 Mn 0.1 O 2 (NMC 811) cathode offers high voltage and high specific capacity, making it promising for high energy density batteries. However, large-scale manufacturing of aqueous-processed NMC 811 electrodes remains challenging due to proton exchange causing material decomposition and capacity loss. This work addresses this issue by constructing an in situ nanocellulose protective layer for NMC 811 particles via electrostatic interactions during the slurry preparation. For the first time, the interatomic spacing between inter-chains of nanocellulose is measured through wide-angle X-ray scattering and demonstrate the ability to effectively confine interlayer water using atomistic simulations. Moreover, this nanocellulose coverage simultaneously minimizes Li + surface segregation and mitigates water infiltration. Owing to less material decomposition during the aqueous processing, nanocellulose-protected NMC electrodes exhibit higher initial coulombic efficiency (83% vs 62% at 0.1C) and capacity (133 vs 59 mAh g −1 at 6C) than unprotected electrodes. Additionally, optimized aqueous-processed NMC electrodes offer comparable or even superior electrochemical properties compared to the electrodes fabricated using the conventional toxic organic solvent, N-methyl-2-pyrrolidone. Consequently, the developed approach enables affordable, sustainable aqueous processing for Nickel-rich NMC 811 cathodes with excellent electrochemical performances.

25 ENERGY STORAGE↗

Revealing the Cluster-Cloud and Its Role in Nanocrystallization

Elucidating the early stages of crystallization from supersaturated solutions is of critical importance, but remains a great challenge. An in situ liquid cell transmission electron microscopy study reveals an intermediate state of condensed atomic clusters during Pd and Au crystallizations, which is named a “cluster-cloud.” It is found that nucleation is initiated by the collapse of a cluster-cloud, first forming a nanoparticle. The subsequent particle maturation proceeds via multiple out-and-in relaxations of the cluster-cloud to improve crystallinity: from a poorly crystallized phase, the particle evolves into a well-defined single-crystal phase. Both experimental investigations and atomistic simulations suggest that the cluster-cloud-mediated nanocrystallization involves an order–disorder phase separation and reconstruction, which is energetically favored compared to local rearrangements within the particle. Lastly, this finding grants new insights into nanocrystallization mechanisms, and provides useful information for the improvement of synthesis pathways of nanocrystals.

36 MATERIALS SCIENCE↗

Freestanding Ferroelectric Bubble Domains

Bubble-like domains, typically a precursor to the electrical skyrmions, arise in ultrathin complex oxide ferroelectric-dielectric-ferroelectric heterostructures epitaxially clamped with flat substrates. Here, it is reported that these specially ordered electric dipoles can also be retained in a freestanding state despite the presence of inhomogeneously distributed structural ripples. By probing local piezo and capacitive responses and using atomistic simulations, this study analyzes these ripples, sheds light on how the bubbles are stabilized in the modified electromechanical energy landscape, and discusses the difference in morphology between bubbles in freestanding and as-grown states. Furthermore, these results are anticipated to be the starting point of a new paradigm for the exploration of electric skyrmions with arbitrary boundaries and physically flexible topological orders in ferroelectric curvilinear space.

36 MATERIALS SCIENCE↗

Large Exchange Coupling Between Localized Spins and Topological Bands in MnBi 2 Te 4

Magnetism in topological materials creates phases exhibiting quantized transport phenomena with potential technological applications. The emergence of such phases relies on strong interaction between localized spins and the topological bands, and the consequent formation of an exchange gap. However, this remains experimentally unquantified in intrinsic magnetic topological materials. Here, this interaction is quantified in MnBi 2 Te 4 , a topological insulator with intrinsic antiferromagnetism. This is achieved by optically exciting Bi-Te p states comprising the bulk topological bands and interrogating the consequent Mn 3d spin dynamics, using a multimodal ultrafast approach. Ultrafast electron scattering and magneto-optic measurements show that the p states demagnetize via electron-phonon scattering at picosecond timescales. Despite being energetically decoupled from the optical excitation, the Mn 3d spins, probed by resonant X-ray scattering, are observed to disorder concurrently with the p spins. Together with atomistic simulations, this reveals that the exchange coupling between localized spins and the topological bands is at least 100 times larger than the superexchange interaction, implying an optimal exchange gap of at least 25 meV in the surface states. Here, by quantifying this exchange coupling, this study validates the materials-by-design strategy of utilizing localized magnetic order to manipulate topological phases, spanning static to ultrafast timescales.

36 MATERIALS SCIENCE↗

On the Structure–Property Relationship of Semi‐Coherent FeCr 2 O 4 /Cr 2 O 3 Spinel/Corundum Interfaces

Abstract Oxide heterointerfaces are extremely common in both natural and artificial composite structures, including corroded structural materials. Often, key properties such as segregation and atomic transport are dictated by the structure of these interfaces. However, despite this critical link, very few heterointerfaces have been studied in any detail at the atomic scale. Here, one important oxide heterointerface is examined, between spinel and corundum, using the chemical system FeCr 2 O 4 /Cr 2 O 3 as a representative and technologically important case. Using atomistic simulation techniques, it is found that the structure, particularly the local chemistry, of the interface depends on the crystal chemistry at the interface. This atomic and chemical structure further impacts important properties such as defect segregation and mass transport. It is found that defects can nucleate at some regions of these interfaces and migrate back and forth across the corundum layer, suggesting high atomic mobility that may be important for the evolution of spinel/corundum composite structures in extreme conditions.

36 MATERIALS SCIENCE↗

Machine Learning for Thermal Transport Analysis of Aluminum Alloys with Precipitate Morphology

A large number of microstructural parameters and a wide range of transport physics impose challenges on thermal transport analysis of alloy. Herein, modern data science techniques are employed to overcome the challenges, pursuing effective calculation of thermal transport properties. This emerging approach is tested for precipitate-hardened aluminum (Al) alloy with consideration of precipitate morphology. The finite element method (FEM) is employed to create a database of effective thermal conductivity of hypothetical Al alloys with varying precipitate morphological and thermal transport features. Using the FEM-generated data sets, the correlation analysis is conducted to qualitatively evaluate the importance of various precipitate features. The correlation analysis identifies the surface area, average diameter, and volume fraction of precipitates as the most descriptive features for determining the thermal conductivity of alloys. Afterward machine learning (ML) models are trained to accurately predict the effective thermal conductivity. Comparing the ML predictions with effective thermal conductivity and microstructural information from experiments, precipitate thermal transport properties can be calculated, such as interfacial conductance between Al matrix and precipitate, without atomistic simulations. This research demonstrates the feasibility of data-driven approaches for effective thermal transport calculation and the promise of the FEM-generated data analysis for more comprehensive evaluation of metallic alloys.

36 MATERIALS SCIENCE↗

Machine Learning Reveals Memory of the Parent Phases in Ferroelectric Relaxors Ba(Ti$_{1-x}$,Zr x )O 3

Machine learning has been establishing its potential in multiple areas of condensed matter physics and materials science. Here, in this work, an unsupervised machine learning workflow is developed and used within a framework of first-principles-based atomistic simulations to investigate phases, phase transitions, and their structural origins in ferroelectric relaxors, Ba(Ti 1-x ,Zr x )O 3 . The applicability of the workflow is first demonstrated to identify phases and phase transitions in the parent compound, a prototypical ferroelectric BaTiO 3 . Then the workflow is applied for Ba(Ti 1-x ,Zrx)O 3 with x ≤ 0.25 to reveal i) that some of the compounds bear a subtle memory of BaTiO 3 phases beyond the point of the pinched phase transition, which could contribute to their enhanced electromechanical response; ii) the existence of peculiar phases with delocalized precursors of nanodomains—likely candidates for the controversial polar nanoregions; and iii) nanodomain phases for the largest concentrations of x.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Direct Observation of Elusive (DTBM‐SEGPHOS)CuH Monomer Enables Mechanistic Insights Into Hydrocupration, Aggregation, and Dynamics of Alkene Functionalization Catalysis

The bulky diphosphine DTBM-SEGPHOS is widely employed in CuH-catalyzed transformations as it provides remarkably active catalyst systems. The transient (DTBM-SEGPHOS)CuH monomer (LCuH) is the often-invoked active species. However, its instability has prevented spectroscopic characterization and mechanistic elucidation, hindering mechanistic understanding. We report low-temperature NMR spectroscopic characterization of LCuH, enabling quantitative kinetic analysis of the stoichiometric hydrocupration and catalytic hydroboration of cyclopentene, as well as the structural identification of two CuH clusters. LCuH inserts cyclopentene at −43°C, reaffirming its high reactivity toward olefins. LCuH deactivates to form L 2 Cu 3 H 3 and L 2 Cu 4 H 4 clusters, in which LCuH dimerization initiates aggregation. Kinetic analysis of reactions of unactivated alkenes indicates that competing on-cycle alkene hydrocupration and LCuH dimerization impact performance, as catalyst deactivation and turnover occur on comparable timescales. Structure–activity analysis using atomistic simulations shows that the steric profile of DTBM-SEGPHOS increases the CuH dimerization barrier by ∼7.7 kcal mol−1 compared to that of SEGPHOS, rationalizing the unique ability of DTBM-SEGPHOS to stabilize a reactive monomer for hydrocupration of broader alkene substrates. These findings illustrate the fundamental design principle that steric control of aggregation governs CuH catalyst performance, explaining both the exceptional activity of (DTBM-SEGPHOS)CuH and the limitations imposed by competing deactivation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Active Learning A Neural Network Model For Gold Clusters & Bulk From Sparse First Principles Training Data

Small metal clusters are of fundamental scientific interest and of tremendous significance in catalysis. These nanoscale clusters display diverse geometries and structural motifs depending on the cluster size; a knowledge of this size-dependent structural motifs and their dynamical evolution has been of longstanding interest. Given the high computational cost of first-principles calculations, molecular modeling and atomistic simulations such as molecular dynamics (MD) has proven to be an important complementary tool to aid this understanding. Classical MD typically employ predefined functional forms which limits their ability to capture such complex size-dependent structural and dynamical transformation. Neural Network (NN) based potentials represent flexible alternatives and in principle, well-trained NN potentials can provide high level of flexibility, transferability and accuracy on-par with the reference model used for training. A major challenge, however, is that NN models are interpolative and requires large quantities (similar to 10 4 or greater) of training data to ensure that the model adequately samples the energy landscape both near and far-from-equilibrium. A highly desirable goal is minimize the number of training data, especially if the underlying reference model is first-principles based and hence expensive. In this work, we introduce an active learning (AL) scheme that trains a NN model on-the-fly with minimal amount of first-principles based training data. Our AL workflow is initiated with a sparse training dataset (similar to 1 to 5 data points) and is updated on-the-fly via a Nested Ensemble Monte Carlo scheme that iteratively queries the energy landscape in regions of failure and updates the training pool to improve the network performance. Using a representative system of gold clusters, we demonstrate that our AL workflow can train a NN with similar to 500 total reference calculations. Using an extensive DFT test set of similar to 1100 configurations, we show that our AL-NN is able to accurately predict both the DFT energies and the forces for clusters of a myriad of different sizes. Our NN predictions are within 30 meV/atom and 40 meV/angstrom of the reference DFT calculations. Moreover, our AL-NN model also adequately captures the various size-dependent structural and dynamical properties of gold clusters in excellent agreement with DFT calculations and available experiments. We finally show that our AL-NN model also captures bulk properties reasonably well, even though they were not included in the training data.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Unlocking High Capacity and Reversible Alkaline Iron Redox Using Silicate-Sodium Hydroxide Hybrid Electrolytes

Alkaline iron (Fe) batteries are attractive due to the high abundance, low cost, and multiple valent states of Fe but show limited columbic efficiency and storage capacity when forming electrochemically inert Fe 3 O 4 on discharging and parasitic H 2 on charging. Herein, sodium silicate is found to promote Fe(OH) 2 /FeOOH against Fe(OH) 2 /Fe 3 O 4 conversions. Electrochemical experiments, operando X-ray characterization, and atomistic simulations reveal that improved Fe(OH) 2 /FeOOH conversion originates from (i) strong interaction between sodium silicate and iron oxide and (ii) silicate-induced strengthening of hydrogen-bond networks in electrolytes that inhibits water transport. Furthermore, the silicate additive suppresses hydrogen evolution by impairing energetics of water dissociation and hydroxyl de-sorption on iron surfaces. In conclusion, this new silicate-assisted redox chemistry mitigates H 2 and Fe 3 O 4 formation, improving storage capacity (199 mAh g -1 in half-cells) and coulombic efficiency (94 % after 400 full-cell cycles), paving a path to realizing green battery systems built from earth-abundant materials.

36 MATERIALS SCIENCE↗