Search NASA⌕ Search

SEARCH · Search NASA

Results for “behavior modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

Modeling of Sediment Bed Behavior for Critical Velocity in Horizontal Piping

This paper compares results from a predictive tool for modeling transport of a multiphase mixture (solids in a liquid) in a pipeline, (up to and including plugging) with experiments performed to support the Hanford site’s Waste Treatment and Immobilization Plant (WTP). The treatment of high-level waste at the DOE Office of River Protection’s WTP will involve the transfer of high solid content suspensions through pipelines. Pipeline plugging was identified as a significant potential issue by a panel of external experts. In response to their concerns an experimental effort was initiated at PNNL to determine the critical velocities for a variety of operating conditions. A computational method has been developed to predict the dynamic behavior of a sediment bed in response to the surrounding suspension flow. The flow field is modeled using a lattice kinetics method, similar to the lattice Boltzmann method, which scales very well on highly parallel computers. Turbulent quantities are calculated using a k-epsilon RANS model. This work is part of a larger effort to develop a process simulation capability for a wide range of applications. Solids are represented using two different continuum fields. The suspended solids are treated as passive scalars in the flow field, including terms for hindered settling and Brownian diffusion. Normal stresses created by the irreversible collisions of particles during shearing are added to the pressure tensor. The sediment bed interface is represented using a continuum phase field with a diffuse interface. The bed may change with time due to settling, erosion and deposition through convection. The erosion rates are calculated using the local shear stress obtained from the turbulence model. The method is compared with data from the PNNL pipeline experiments conducted at PNNL (Poloski et al. 2008). The experimental flow loop consists of 3-inch schedule 40 piping with instrumentation for determining flow rate and pressure gradient. The simulant test particles ranged in density from 2.5 to 8 g/cc while the nominal particle size ranged from 10 to 100 μm. At the beginning of each test, the slurry flow velocity was nominally set to 8 ft/sec. The flow was incrementally ramped down, and a steady-state pressure gradient was obtained at each flow condition. A rise in pressure gradient as the flow rate drops indicates that the pipe cross-sectional area is beginning to fill with sediment. This point is referred to as the “critical velocity”. Visualization information is provided using Electrical Resistance Tomography (ERT). The paper will show favorable comparison of results with data.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Systematic comparison of the behaviors produced by computational models of epileptic neocortex.

Two existing models of brain dynamics in epilepsy, one detailed (i.e., realistic) and one abstract (i.e., simplified) are compared in terms of behavioral range and match to in vitro mouse recordings. A new method is introduced for comparing across computational models that may have very different forms. First, high-level metrics were extracted from model and in vitro output time series. A principal components analysis was then performed over these metrics to obtain a reduced set of derived features. These features define a low-dimensional behavior space in which quantitative measures of behavioral range and degree of match to real data can be obtained. The detailed and abstract models and the mouse recordings overlapped considerably in behavior space. Both the range of behaviors and similarity to mouse data were similar between the detailed and abstract models. When no high-level metrics were used and principal components analysis was computed over raw time series, the models overlapped minimally with the mouse recordings. The method introduced here is suitable for comparing across different kinds of model data and across real brain recordings. It appears that, despite differences in form and computational expense, detailed and abstract models do not necessarily differ in their behaviors.

59 BASIC BIOLOGICAL SCIENCES↗

Event-driven simulation in SELMON: An overview of EDSE

EDSE (event-driven simulation engine), a model-based event-driven simulator implemented for SELMON, a tool for sensor selection and anomaly detection in real-time monitoring is described. The simulator is used in conjunction with a causal model to predict future behavior of the model from observed data. The behavior of the causal model is interpreted as equivalent to the behavior of the physical system being modeled. An overview of the functionality of the simulator and the model-based event-driven simulation paradigm on which it is based is provided. Included are high-level descriptions of the following key properties: event consumption and event creation, iterative simulation, synchronization and filtering of monitoring data from the physical system. Finally, how EDSE stands with respect to the relevant open issues of discrete-event and model-based simulation is discussed.

Rouquette, Nicolas F.↗

Influence of Numerical Modeling Approaches on Damped Behavior of Flexible Beams: Preprint

Composites structures are widely used in aerospace and wind energy applications for their excellent stiffness and strength-to-weight properties. In these structures, structural damping is critical to predict vibration amplitudes, performance, and reliability. Structural damping is of particular interest for slender wings, rotorcraft blades, and wind turbine blades that can exhibit complex vibration phenomena and are frequently modeled with geometrically exact beam theory (GEBT). Standard approaches of stiffness proportional or modal damping merely assign user defined values and cannot predict damping behavior. This work compares stiffness proportional damping to two more advanced damping approaches: modal strain energy and Prony series. The modal strain energy approach uses a sectional analysis tool to calculate the beam stiffness and postprocess internal stresses from GEBT simulations. The internal stresses are then used to calculate modal damping factors. The Prony series is implemented within GEBT to directly model viscoelastic behavior of the composites. These approaches are compared by modeling the evolution of the damping factors of a realistic flexible wind turbine blade with varying rotational speed. Discrepancies between the approaches suggest areas for future modeling development, but differences in nonlinear damping values are less than current uncertainties about the magnitude of structural damping.

17 WIND ENERGY↗

Agent Based Modeling of Air Carrier Behavior for Evaluation of Technology Equipage and Adoption

As part of ongoing research, the National Aeronautics and Space Administration (NASA) and LMI developed a research framework to assist policymakers in identifying impacts on the U.S. air transportation system (ATS) of potential policies and technology related to the implementation of the Next Generation Air Transportation System (NextGen). This framework, called the Air Transportation System Evolutionary Simulation (ATS-EVOS), integrates multiple models into a single process flow to best simulate responses by U.S. commercial airlines and other ATS stakeholders to NextGen-related policies, and in turn, how those responses impact the ATS. Development of this framework required NASA and LMI to create an agent-based model of airline and passenger behavior. This Airline Evolutionary Simulation (AIRLINE-EVOS) models airline decisions about tactical airfare and schedule adjustments, and strategic decisions related to fleet assignments, market prices, and equipage. AIRLINE-EVOS models its own heterogeneous population of passenger agents that interact with airlines; this interaction allows the model to simulate the cycle of action-reaction as airlines compete with each other and engage passengers. We validated a baseline configuration of AIRLINE-EVOS against Airline Origin and Destination Survey (DB1B) data and subject matter expert opinion, and we verified the ATS-EVOS framework and agent behavior logic through scenario-based experiments. These experiments demonstrated AIRLINE-EVOS's capabilities in responding to an input price shock in fuel prices, and to equipage challenges in a series of analyses based on potential incentive policies for best equipped best served, optimal-wind routing, and traffic management initiative exemption concepts..

Horio, Brant M.↗

Open-Source High-Fidelity Aggregate Composite Load Models of Emerging Load Behaviors for Large-Sale Analysis

The goal of this project is to accurately model the dynamic loads for power system planning and operation and to address the challenges inherent in such modeling. Existing load models are inadequate to handle the increasing proliferation of residential air conditioner loads and distributed energy resources, the emerging trends of price-responsive demand, and the growing importance of protective devices in equipment and buildings. A need has emerged to develop a fundamentally new class of load models and next-generation data tools. This work proposes to develop a set of regional–level, scalable open source load models and tools, including large-scale aggregate load protection, concept of price responsive demand, advanced load composition data, next-generation load model data tools, and advanced composite load model calibration and validation frameworks to address new challenges in the representation of next-generation load models.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Modeling of Low Velocity Impact Damage in Injection-Molded Long Fiber Composites

Apart from increase in failure strength, increase in the impact resistance is one of the major reasons for the interest in long-fiber polymer composites for automotive structural applications. The in-house code EMTA has been adapted to accommodate dynamic problems. It combines with ABAQUS Explicit solver to model impact behavior of long-fiber thermoplastics. At the present stage, the model captures the elastic behavior of LFTs in a dynamic formulation that incorporates the Eshelby equivalent inclusion method, the Mori-Tanaka assumption and the fiber orientation averaging technique. The effect of average fiber length on the impact behavior of discontinuous fiber composites has been studied with the aid of the preliminary model. Fiber lengths from short fiber range to long fiber range were explored with fiber orientation distributions from obtained from previous studies. The numerical examples indicate a slight improvement in the energy absorption capabilities of long fiber thermoplastics over short fiber thermoplastics. Advanced impact models need to be incorporated into the current code to model impact behavior with greater accuracy.

long fiber thermoplastics, impact, finite element,↗

From calibration to parameter learning: Harnessing the scaling effects of big data in geoscientific modeling

Abstract The behaviors and skills of models in many geosciences (e.g., hydrology and ecosystem sciences) strongly depend on spatially-varying parameters that need calibration. A well-calibrated model can reasonably propagate information from observations to unobserved variables via model physics, but traditional calibration is highly inefficient and results in non-unique solutions. Here we propose a novel differentiable parameter learning (dPL) framework that efficiently learns a global mapping between inputs (and optionally responses) and parameters. Crucially, dPL exhibits beneficial scaling curves not previously demonstrated to geoscientists: as training data increases, dPL achieves better performance, more physical coherence, and better generalizability (across space and uncalibrated variables), all with orders-of-magnitude lower computational cost. We demonstrate examples that learned from soil moisture and streamflow, where dPL drastically outperformed existing evolutionary and regionalization methods, or required only ~12.5% of the training data to achieve similar performance. The generic scheme promotes the integration of deep learning and process-based models, without mandating reimplementation.

54 ENVIRONMENTAL SCIENCES↗

Constitutive Modeling for Hot Deformation Behavior of Al-5083 + SiC Composite

In the present research, isothermal hot deformation behavior of aluminum 5083 alloy + 15 (wt.%) SiC composite was obtained through compression test on INSTRON 8801 universal tensile testing machine (UTM) under a wide temperature range of 473-773 K and strain rate range of 0.01-10 s{sup −1}. The experimental true stress–strain data were employed to establish constitutive equations based on modified Johnson–Cook (JC) model and modified Zerilli–Armstrong (ZA) model to predict the hot flow behavior of the composite. The flow stress values obtained from these two models were plotted against the experimental flow curves to check the accuracy of these models. Suitability of the models was evaluated by comparing correlation coefficient (R), average absolute relative error and relative errors of prediction. The results show that the hot flow stresses of the present material depend on temperature and strain rate significantly. Both the models give good description of the hot deformation behavior of the composite. The prediction accuracy is found to be higher for modified ZA model compared to modified JC model, though the number of materials constants involved and time needed to evaluate them to establish the model are lower for modified JC model.

36 MATERIALS SCIENCE↗

Simulation of Bubble Behavior in a Water Physical Model of an Aluminum Degassing Ladle Unit Employing Compound Technique of Rotary Blowing and Ultrasonic

A two-dimensional volume of fluid (VOF) model was developed to simulate the behavior of bubbles in a physical model of the aluminum degassing unit employing the compound technique of rotary blowing and ultrasonic. The effect of rotation speed on bubble behavior under rotating flow field, and the effects of ultrasonic parameters including the amplitude, length, and position of ultrasonic end-face on bubble behavior under compound field were analyzed according to the simulation results, respectively. The experiment shows the simulation results for the bubble shape and trajectory agree well with the experimental observations. Under single rotating flow field, the rotation speed has a strong impact upon bubble trajectory and the optimal speed is 450 rpm. Under compound field, ultrasonic can increase the number of broken bubbles, and push bubbles to further area, which is beneficial to strengthen the bubble distribution and improve the degassing effect. The appropriate amplitude, length, and position of ultrasonic end-face are 23 μm, 50 mm, and 185 mm.

36 MATERIALS SCIENCE↗

Experimental and modeling study of the autoignition behavior of a standard oxygenated gasoline fuel

Gasoline surrogate models can be conveniently used to simulate the combustion behavior of fuels in internal combustion engines. Because of limitations in the number of robust models available and the high computational cost of running them, simple surrogates with only 2 or 3 components (namely n-heptane, iso-octane and toluene) have been long preferred to simulate the ignition behavior of gasoline in engine calculations. More recently, thanks to the development of new, well-validated kinetic models and the access to cheap high-performance computing, the scientific and engineering community is utilizing the higher fidelity provided by more complex mixture models. The added detail in composition can in fact better reproduce variation in the fuel reactivity with pressure (an important feature for downsized, boosted conditions) and blending behavior of real fuels. In this study, the ignition behavior of a research grade full blend oxygenated fuel matching the typical specification of US standard grade gasoline has been investigated by means of rapid compression experiments and detailed kinetic calculations. A multicomponent fuel surrogate model has been developed using compositional information and a surrogate optimization tool. Based on the experimental and computational results presented in this study, general considerations about guidelines in the formulation of gasoline fuel surrogates are provided.

autoignition↗

Temperature and flow measurements on near-freezing aviation fuels in a wing-tank model

Freezing behavior, pumpability, and temperature profiles for aviation turbine fuels were measured in a 190-liter tank chilled to simulate internal temperature gradients encountered in commercial airplane wing tanks. When the bulk of the fuel was above the specification freezing point, pumpout of the fuel removed all fuel except a layer adhering to the bottom chilled surfaces, and the unpumpable fraction depended on the fuel temperature near these surfaces. When the bulk of the fuel was at or below the freezing point, pumpout ceased when solids blocked the pump inlet, and the unpumpable fraction depended on the overall average temperature.

Friedman, R.↗

Temperature and flow measurements on near-freezing aviation fuels in a wing-tank model

Freezing behavior, pumpability, and temperature profiles for aviation turbine fuels were measured in a 190-liter tank, to simulate internal temperature gradients encountered in commercial airplane wing tanks. Two low-temperature situations were observed. Where the bulk of the fuel is above the specification freezing point, pumpout of the fuel removes all fuel except a layer adhering to the bottom chilled surfaces, and the unpumpable fraction depends on the fuel temperature near these surfaces. Where the bulk of the fuel is at or below the freezing point, pumpout ceases when solids block the pump inlet, and the unpumpable fraction depends on the overall average temperature.

Friedman, R.↗

Experimental and Numerical Investigations of Cyclic Plastic Deformation of Al-Mg Alloy

In this work, low-cycle fatigue (LCF) tests are performed on as-received and solution-treated Al-Mg alloy (AA 5754). Solution heat treatment of the as-received alloy is performed at 530 °C for 2 h and then quenched in water at room temperature. The low-cycle fatigue response of the as-received and solution-treated alloy is evaluated at five different strain amplitudes from 0.2 to 0.6%. The strain rate of 0.5 × 10{sup −3} s{sup −1} is kept constant in all the LCF tests. The LCF behavior of AA 5754 is modeled by finite element method (FEM) using Chaboche kinematic hardening cyclic plasticity model. Hardening behavior or fatigue life of as-received and solution-treated alloy is successfully simulated using this model. The results obtained by FEM simulations are compared with those obtained by LCF experiments. Microstructural studies are also performed for as-received and solution-treated alloy. The fracture surfaces obtained from LCF tests are analyzed by scanning electron microscopy.

36 MATERIALS SCIENCE↗

A Micromechanics Finite Element Model for Studying the Mechanical Behavior of Spray-On Foam Insulation (SOFI)

A micromechanics model has been constructed to study the mechanical behavior of spray-on foam insulation (SOFI) for the external tank. The model was constructed using finite elements representing the fundamental repeating unit of the SOFI microstructure. The details of the micromechanics model were based on cell observations and measured average cell dimensions discerned from photomicrographs. The unit cell model is an elongated Kelvin model (fourteen-sided polyhedron with 8 hexagonal and six quadrilateral faces), which will pack to a 100% density. The cell faces and cell edges are modeled using three-dimensional 20-node brick elements. Only one-eighth of the cell is modeled due to symmetry. By exercising the model and correlating the results with the macro-mechanical foam behavior obtained through material characterization testing, the intrinsic stiffness and Poisson s Ratio of the polymeric cell walls and edges are determined as a function of temperature. The model is then exercised to study the unique and complex temperature-dependent mechanical behavior as well as the fracture initiation and propagation at the microscopic unit cell level.

Ghosn, Louis J.↗

An indirect latent informational conformity social influence choice model: Formulation and case study

The current state-of-the-art in social influence models of travel behavior is conformity models with direct benefit social influence effects. Indirect effects have seen limited development, but this paper presents a latent class discrete choice model of an indirect informational conformity hypothesis. Moreover, class membership depends on the proportion of group members who adopt a behavior. Membership into the more informed class causes changes in the preferences of those individuals thus making adoption more attractive. Equilibrium properties are derived for this model showing the possibility of multiple equilibria but under different conditions than the direct-benefit formulations. Social influence elasticity is derived for both models types. The informational conformity model can represent non-linear elasticity behavior unlike the direct-benefit formulation. Additionally, a two-stage control function is developed to obtain consistent parameter estimates in the presence of an endogenous class membership model covariate that is correlated with choice model unobservables. A case study to study social influence in bicycle ownership in the United States is presented. Our results showed that more informed households had a greater chance of owning a bike due to preference changes with less sensitivity to smaller home footprints and limited incomes. The behavioral hypothesis of positive preference change due to information transfer was confirmed. Observed ownership share closely matched predicted local-level equilibrium in some metropolitan areas but was unable to achieve expected prediction rate within confidence intervals. Finally, the elasticity of social influence was found to range locally from about 0.5% to 1.0%.

99 GENERAL AND MISCELLANEOUS↗