Search NASA⌕ Search

SEARCH · Search NASA

Results for “comparative modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Estimation of hydraulic conductivity in a watershed using sparse multi-source data via Gaussian process regression and Bayesian experimental design

Enhanced water management systems depend on accurate estimation of subsurface hydraulic properties. However, geologic formations can vary significantly, so information from a single source (e.g., widely spaced boreholes) is insufficient in characterizing subsurface aquifer properties. Therefore, multiple sources of information are needed to complement the hydrogeology understanding of a region. Here, this study presents a numerical framework in which information from different measurement sources is combined to characterize the 3D random field in a multi-fidelity prediction model. Coupled with the model, a Bayesian experimental design was used to determine the best future sampling locations. The Upper Sangamon watershed in east-central Illinois was selected as the case study site, where the multi-fidelity Gaussian process model was used to estimate the hydraulic conductivity in the region of interest. Multi-source observation data were obtained from electrical resistivity and borehole pumping tests. The accuracy of the model prediction is dependent on the locations and the distribution of both high- and low-fidelity data. Furthermore, the multi-fidelity model was compared with the single-fidelity model. The uncertainties and confidence in the measurements and parameter estimates were quantified and used to design future cycles of data collection to further improve the confidence intervals.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Operator inference for non-intrusive model reduction of systems with non-polynomial nonlinear terms

Here in this work we present a non-intrusive model reduction method to learn low-dimensional models of dynamical systems with non-polynomial nonlinear terms that are spatially local and that are given in analytic form. In contrast to state-of-the-art model reduction methods that are intrusive and thus require full knowledge of the governing equations and the operators of a full model of the discretized dynamical system, the proposed approach requires only the non-polynomial terms in analytic form and learns the rest of the dynamics from snapshots computed with a potentially black-box full-model solver. The proposed method learns operators for the linear and polynomially nonlinear dynamics via a least-squares problem, where the given non-polynomial terms are incorporated on the right-hand side. The least-squares problem is linear and thus can be solved efficiently in practice. The proposed method is demonstrated on three problems governed by partial differential equations, namely the diffusion–reaction Chafee–Infante model, a tubular reactor model for reactive flows, and a batch-chromatography model that describes a chemical separation process. The numerical results provide evidence that the proposed approach learns reduced models that achieve comparable accuracy as models constructed with state-of-the-art intrusive model reduction methods that require full knowledge of the governing equations.

42 ENGINEERING↗
DOE OSTI2021

Impact of Precipitation Parameters on the Specific Surface Area of PuO 2

Controlling the properties of PuO 2 through processing is of vital importance to environmental transport and fate, production of nuclear fuels, nuclear forensic analyses, stockpile stewardship, and storage of nuclear wastes applications. A number of processing conditions have been identified to control final product properties, including specific surface area (SSA), residual carbon content, adsorption of volatile species, morphology, and particle size. In this paper, a novel approach is developed for the prediction of PuO 2 SSA via the synthetic route of Pu(IV) oxalate precipitation followed by calcination. The proposed model utilizes multivariate regression methodology and leave one out formalism to link Savannah River Site (SRS) precipitation and calcination production data to the SSA of the final product. A comparison among the models provides insight into the accuracy and ability to identify variations amongst the processing data. Additionally, the models may also be used to fit new data outside of the parameters explored in a production facility. Finally, the trained model was compared to a similarly trained conventional model form to illustrate the influence of precipitation parameters on the prediction of the final SSA. The models presented here attempt to provide new methods for more accurate prediction of the PuO 2 product properties in a production scale environment for key environmental and nuclear applications.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2024

Physics informed neural network can retrieve rate and state friction parameters from acoustic monitoring of laboratory stick-slip experiments

Various machine learning (ML) and deep learning (DL) techniques have been recently applied to the forecasting of laboratory earthquakes from friction experiments. The magnitude and timing of shear failures in stick-slip cycles are predicted using features extracted from the recorded ultrasonic or acoustic emission (AE) signals. In addition, the Rate and State Friction (RSF) constitutive laws are extensively used to model the frictional behavior of faults. In this work, we use data from shear experiments coupled with passive acoustic (variance, kurtosis, and AE rate) interleaved with active source ultrasonic monitoring (transmitted wave amplitude) to develop physics-informed neural network (PINN) models incorporating the RSF law and AE rate generation equation with wave amplitude serving as a proxy for friction state variable. This PINN framework allows learning RSF parameters from stick-slip experiments rather than measuring them through a series of velocity step experiments. We observe that when the stick-slip cycles are irregular, the PINN models outperform the data-driven DL models. Transfer learning (TL) PINN models are also developed by pre-training on data collected at one normal stress level followed by forecasting shear failures and retrieving RSF parameters at other stress levels (i.e., with different recurrence intervals) after retraining on a limited amount of new data. Our findings suggest that TL models perform better compared to standalone models. Both standalone and TL PINN-estimated RSF parameters and their ground truth values show excellent agreements thus demonstrating that RSF parameters can be retrieved from laboratory stick-slip experiments using the corresponding acoustic data and that the transmitted wave amplitude provides a good representation of the evolving frictional state during stick-slips.

58 GEOSCIENCES↗
DOE OSTI2023

Noise-specific beating in the higher-level Ramsey curves of a transmon qubit

We report: in the higher levels of superconducting transmon devices and more generally charge sensitive devices, T 2 * measurements made in the presence of low-frequency time-correlated 1/f charge noise and quasiparticle-induced parity flips can give an underestimation of the total dephasing time. The charge variations manifest as beating patterns observed in the overlay of several Ramsey fringe curves and are reproduced with a phenomenological Ramsey curve model, which accounts for the charge variations. T 2 * dephasing times, which more accurately represent the total dephasing time, are obtained. The phenomenological model is compared with a Lindblad master equation model. Both models are found to be in agreement with one another and the experimental data. Finally, the phenomenological formulation enables a simple method in which the power spectral density for the low-frequency noise can be inferred from the overlay of several Ramsey curves.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

Asymptotic Freedom at the Berezinskii-Kosterlitz-Thouless Transition without Fine-Tuning Using a Qubit Regularization

We propose a two-dimensional hard-core loop-gas model as a way to regularize the asymptotically free massive continuum quantum field theory that emerges at the Berezinskii-Kosterlitz-Thouless transition. Without fine-tuning, our model can reproduce the universal step-scaling function of the classical lattice X Y model in the massive phase as we approach the phase transition. This is achieved by lowering the fugacity of Fock-vacuum sites in the loop-gas configuration space to zero in the thermodynamic limit. Some of the universal quantities at the Berezinskii-Kosterlitz-Thouless transition show smaller finite size effects in our model as compared to the traditional X Y model. Our model is a prime example of qubit regularization of an asymptotically free massive quantum field theory in Euclidean space-time and helps understand how asymptotic freedom can arise as a relevant perturbation at a decoupled fixed point without fine-tuning. Published by the American Physical Society 2024

Physics↗
DOE OSTI2021

Methods and Usability Enhancements in Shift for Non-LWR Applications

Several development and analysis tasks were undertaken in FY21 under the Nuclear Energy Advanced Modeling and Simulation program to enhance modeling of non light–water reactors (LWRs) with Shift. Specifically, these efforts targeted enhancements for tristructural isotropic (TRISO) fuel modeling. A new Shift user interface was developed that allows for much better usability and ease of modeling for non-LWR problems and TRISO fuel. Performance studies were conducted using an HTR-10 fuel pebble model by comparing different geometry packages in Shift, KENO-VI, and Serpent. These studies showed that the new geometry package in Shift performs well compared to Serpent for TRISO fuel modeling with consistent tracking options between both packages. The studies also identified the most critical areas of improvement for more efficiently performing Monte Carlo transport on TRISO fuel models with Shift. Tally calculations in Shift were optimized for non-LWR cross section generation and depletion calculations, and areas for further optimization and accuracy improvements were identified. Finally, initial collaboration efforts were formed between Idaho National Laboratory, Argonne National Laboratory, and the Nuclear Regulatory Commission to use Shift for Comprehensive Reactor Analysis Bundle support.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2021

Improving GCM Representation of Convective Cloud Microphysics by Using ARM Raman Lidar and Cloud Radar Observations

The overall objective of this Department of Energy (DOE) Atmospheric System Research (ASR) funded project is to improve the representation of convective cloud microphysics in global climate models (GCMs) and check it by comparing the model simulations with observations. We have derived the cloud ice water content by synthesizing ARM Raman lidar (RL) and cloud radar observations at the Atmospheric Radiation Measurement (ARM) sites. Noting that the simulated anvil clouds in terms of their macro- and micro-physical properties are sensitive to the parameterization of convective microphysical processes, observed ice water content in anvil clouds provides a useful constraint on these parameterizations. We have improved the convective microphysics parameterization scheme by (1) considering sedimentation for cloud ice crystals that do not fall in the original scheme, (2) applying a new terminal velocity parameterization that depends on the environmental conditions for convective snow, (3) adding a new hydrometeor category, “rimed ice,” to the original four-class (cloud liquid, cloud ice, rain, and snow) scheme, and (4) allowing convective clouds to detrain snow particles into stratiform clouds. We have examined the impact of improved convective cloud microphysics parameterization on the simulated global climate from GCM simulations.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

A hydride model for solid and liquid cerium ejecta particles

Cerium ejecta particles form after a shock wave impacts a cerium plate with a rough surface or prescribed surface perturbation. When these particles are ejected into hydrogen or deuterium gas the material reacts exothermically and raises the temperature of the particle. Two models are developed to capture the heat and mass transfer that occurs during this process. One model assumes that for larger solid ejecta particles, the loss of mass is negligible while for smaller liquid ejecta particles, the loss of mass during reaction is accounted for. The loss of mass is assumed to occur from the hydride layer being extremely brittle and the fact that it will be relatively easy for the hydride material on the outside of the particle to go into tension, crack and flake off. The model is tested by performing simulations similar to the original experiments that motivated the development of these models and comparing the particle temperatures. While the model is able to capture some general features of the flowfield, inaccuracies clearly exist that must be addressed and the results underscore the need for more isolated experiments where fewer assumptions and physical processes are present simultaneously.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Particle Swarm Optimization of Dynamic Load Model Parameters in Large Systems

This paper considers two dynamic load models that are widely used in industry to account for induction motor behavior: CMLD and CLOD. These models must be parametrized for the specific utility system in a general way so that they can be used in planning studies and provide a conservative but realistic representation of load behavior. This study considers a measurement-based approach to tuning both models. The load modeling study compares the response of the tuned models to generic candidate models using historical events. This study considers one area-based subsystem to simplify the modeling approach and reduce the number of models required for simulations. Additionally, because dynamic load models often produce similar results for different sets of parameters, a sensitivity study was conducted to assess the parameter impacts on the voltage response. The sensitivity study covers the parameters that are tuned using event measurements. The process to estimate the parameters uses the particle-swarm optimization algorithm. Overall, the performance of the tuned model more accurately captures recovery voltage, delayed recovery, and settling voltage than its predecessor models while not being overly tuned so that it remains general for peak summer conditions.

dynamic load modeling↗
DOE OSTI2021

Three-dimensional Hydrodynamic Simulations of Convective Nuclear Burning in Massive Stars Near Iron Core Collapse

Nonspherical structure in massive stars at the point of iron core collapse can have a qualitative impact on the properties of the ensuing core-collapse supernova explosions and the multimessenger signals they produce. Strong perturbations can aid successful explosions by strengthening turbulence in the postshock region. Here we report on a set of 4π 3D hydrodynamic simulations of O- and Si-shell burning in massive star models of varied initial masses using MESA and the FLASH simulation framework. We evolve four separate 3D models for roughly the final 10 minutes prior to and including iron core collapse. We consider initial 1D MESA models with masses of 14, 20, and 25 M ⊙ to survey a range of O/Si-shell density and compositional configurations. Further, we characterize the convective shells in our 3D models and compare them to the corresponding 1D models. In general, we find that the angle-average convective speeds in our 3D simulations near collapse are three to four times larger than the convective speeds predicted by MESA at the same epoch for our chosen mixing length parameter of α MLT = 1.5. In three of our simulations, we observe significant power in the spherical harmonic decomposition of the radial velocity field at harmonic indices of ℓ = 1–3 near collapse. Our results suggest that large-scale modes are common in massive stars near collapse and should be considered a key aspect of presupernova progenitor models.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1973

Noise tests of a model engine-over-the-wing STOL configuration using a multijet nozzle with deflector

Noise data were obtained with a small scale model stationary STOL configuration that used an eight lobe mixer nozzle with deflector mounted above a 32-cm-chord wing section. The factors varied to determine their effect upon the noise were wing flap angle, nozzle shape, nozzle location, deflector configuration, and jet velocity. The noise from the mixer nozzle model was compared to the noise from a model using a circular nozzle of the same area. The mixer nozzle model was quieter at the low to middle frequencies, while the circular nozzle was quieter at high frequencies. The perceived noise level (PNL) was calculated for an aircraft 10 times larger than the model. The PNL at 500 feet for the mixer nozzle turned out to be within 1 db of the PNL for the circular nozzle. For some configurations at highly directional broadband noise, which could be eliminated by changes in nozzle and/or deflector location, occurred below the wing.

Olsen, W. A.↗
NASA NTRS1976

Application of remote sensing in estimating evapotranspiration in the Platte river basin

A 'resistance model' and a mass transport model for estimating evapotranspiration (ET) were tested on large fields of naturally subirrigated alfalfa. Both models make use of crop canopy temperature data. Temperature data were obtained with an IR thermometer and with leaf thermocouples. A Bowen ratio-energy balance (BREB) model, adjusted to account for underestimation of ET during periods of strong sensible heat advection, was used as the standard against which the resistance and mass transport models were compared. Daily estimates by the resistance model were within 10% of estimates made by the BREB model. Daily estimates by the mass transport model did not agree quite as well. Performance was good on clear and cloudy days and also during periods of non-advection and strong advection of sensible heat. The performance of the mass transport and resistance models was less satisfactory for estimation of fluxes of latent heat for short term periods. Both models tended to overestimate at low LE fluxes.

Blad, B. L.↗
NASA NTRS1976

A spinar model of Cygnus A

It is proposed that a gravitationally bound supermassive object is located in the 'core' of each of the Cyg A radio clouds and that these objects are responsible for the prolonged ejection of magnetic plasma which produces the synchrotron radio emission. The objects are considered to be analogous to the massive rotators, or spinars, which have been used to model the central radio and optical activity of quasars. The formation of Cyg A is described in terms of the breakup of such an object in the central optical galaxy, and the physical properties of both the compact and the giant clouds are discussed, including the effects of intergalactic drag. It is shown that the spinars are capable of effectively replenishing the extended radio clouds with relativistic electrons, even if they are embedded within the compact clouds. The spinars are modeled quantitatively, and their possible detection is considered. The requirements of the proposed model are compared with those of several other models for bright double radio galaxies.

Flasar, F. M.↗
NASA NTRS1982

Ion-induced nucleation in a binary mixture

Recent ion-induced nucleation studies in a binary mixture of H2O and H2SO4 vapors indicate that conventional classical nucleation theories cannot account for the experimentally observed ion-H2O-H2SO4 microcluster spectra. An empirical-analytical, semi-molecular theory of nucleation of a binary mixture of vapors on ions has been developed. This theory includes molecular approach to ion-induced changes in dielectric properties in the immediate neighborhood of an ion core as well as the size dependence of the surface tension of the microcluster. In addition to gaseous sulfuric acid and water molecules, the effect of ion-hydrates and sulfuric acid hydrates has also been considered. This theory is further simplified by using an empirical correction factor for the electrostatic term. This correction factor has been obtained by comparing the simplified model with the molecular dynamics calculations for selected ion hydrate formation. These two theoretical models are then compared with the classical theory for a variety of experimental conditions.

Smith, A. C.↗
NASA NTRS1984

Mathematical models for cochannel interference in FH/MFSK multiple-access systems

FH/MFSK has been proposed for a multiuser spread spectrum digital communication system to combat both self-jamming and intentional jamming. An independence assumption at the energy detector outputs is used to evaluate such a system for a digitized voice mobile radio system (Yue, 1981). This paper presents a correlated model and compares its performance to an independence model under the symbol error probability criterion. A Gaussian process model is also developed for comparison. It is found that the conventional Gaussian approximation is inadequate in predicting the number of users that can be accommodated by an FH/MFSK system using the conventional receiver. Furthermore, for the cases evaluated, the independence model provides an excellent approximation to the correlated model. Additionally, a conditional Chernoff bound is presented for the more general case of frequency-hopping systems with multiple hops per symbol.

Yan, T.-Y.↗
NASA NTRS1988

An experimental comparison of several current viscoplastic constitutive models at elevated temperature

Four current viscoplastic models are compared experimentally for Inconel 718 at 593 C. This material system responds with apparent negative strain rate sensitivity, undergoes cyclic work softening, and is susceptible to low cycle fatigue. A series of tests were performed to create a data base from which to evaluate material constants. A method to evaluate the constants is developed which draws on common assumptions for this type of material, recent advances by other researchers, and iterative techniques. A complex history test, not used in calculating the constants, is then used to compare the predictive capabilities of the models. The combination of exponentially based inelastic strain rate equations and dynamic recovery is shown to model this material system with the greatest success. The method of constant calculation developed was successfully applied to the complex material response encountered. Backstress measuring tests were found to be invaluable and to warrant further development.

James, G. H.↗
NASA NTRS1989

Nonlinear and distributed parameter models of the mini-mast truss

Large spacecraft such as Space Station Freedom employ large trusses in their construction. The structural dynamics of such trusses often exhibit nonlinear behavior and little damping which can impact significantly the performance of control systems. The Mini-MAST truss was constructed to research such structural dynamics and control systems. The Mini-MAST truss is an object of study for the guest investigator program as part of NASA's controls-structures interaction program. The Mini-MAST truss is deployable and about 65 ft long. Although the bending characteristics of the Mini-MAST truss are essentially linear, the angular deflection under torsional loading has exhibited significant hysteresis and nonlinear stiffness. It is the purpose to develop nonlinear and distributed parameter models of the truss and to compare the model dynamics with actual measurements. Distributed parameter models have the advantage of requiring fewer model parameters. A tangent function is used to describe the nonlinear stiffness in torsion, partly because of the convenience of its easily expressed inverse. Hysteretic slip elements are introduced and extended to a continuum to account for the observed hysteresis in torsion. The contribution of slipping to the structural damping is analyzed and found to be strongly dependent on the applied loads. Because of the many factors which affect the damping and stiffness in a truss, it is risky to assume linearity.

Taylor, Lawrence W., Jr.↗