Search NASA⌕ Search

SEARCH · Search NASA

Results for “consistent scheme”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

Penetration of solar irradiances through the atmosphere and plant canopies.

The equation of radiative transfer is applied to an analysis of solar irradiances penetrating into a plant canopy covered by a turbid atmosphere. The method of discrete coordinates is applied to vertically inhomogeneous atmospheres and plant canopies. It is shown that four-point quadrature yields results with an accuracy that is consistent with irradiance measurements. It is believed that the presented computational scheme may have considerable agricultural applications.

Weinman, J. A.↗

Explicit guidance of drag modulated aeroassisted transfer between elliptical orbits

This paper presents the complete analysis of the problem of minimum-fuel aeroassisted transfer between coplanar elliptical orbits in the case where the orientation of the final orbit is free for selection in the optimization process. The comparison between the optimal pure propulsive transfer and the idealized aeroassisted transfer, by several passages through the atmosphere, is made. In the case where aeroassisted transfer provides fuel saving, a practical scheme for its realization by one passage is proposed. The maneuver consists of three phases: a deorbit phase for nonzero entry angle, followed by an atmospheric fly-through with variable drag control and completed by a postatmospheric phase. An explicit guidance formula for drag control is derived and it is shown that the required exit speed for ascent to the final orbit can be obtained with a very high degree of accuracy.

Vinh, N. X.↗

New LRS spectra for 356 bright IRAS sources

The low-resolution spectra of all IRAS point sources with F(nu) (12 microns) greater than 40 Jy that were not included in the Atlas of Low-Resolution Spectra are presented. These have been classified into eight groups based upon the spectral morphology. Silicate emission spectra and red-continuum spectra associated with H II region sources form about 60 percent of this sample. All types of spectra in the LRS Atlas are represented in the sample except for emission-line sources. The sample is used to test a recent classification scheme for IRAS sources based on broadband colors. The spectra is used to test a recent classification scheme for IRAS sources based on broadband colors. The spectra are consistent with the classifications from the colors in most cases.

Volk, Kevin↗

A B-ISDN-compatible modem/codec

Coded modulation techniques for development of a broadband integrated services digital network (B-ISDN)-compatible modem/codec are investigated. The selected baseband processor system must support transmission of 155.52 Mbit/s of data over an INTELSAT 72-MHz transponder. Performance objectives and fundamental system parameters, including channel symbol rate, code rate, and the modulation scheme are determined. From several candidate codes, a concatenated coding system consisting of a coded octal phase shift keying modulation as the inner code and a high rate Reed-Solomon as the outer code is selected and its bit error rate performance is analyzed by computer simulation. The hardware implementation of the decoder for the selected code is also described.

Hemmati, F.↗

Gas dynamic simulations of galaxy formation

Results are presented from a simulation modeling the formation of a group of galaxies in a 'standard' cold, dark matter universe with delta = 1, h sub 0 = 50 km/(s(Mpc)), baryon fraction omega sub b = 0.1 and spectrum normalization sigma sub 8 = 0.6 (bias parameter b = 1.7). Initial conditions are generated within a periodic box with comoving length 16 Mpc in a manner constrained to produce a small cluster of total mass approximately 10 exp 14 solar mass. Two sets of 643 particles are used to model the dark matter and baryon fluids. Each gas particle represents 1.08 x 10 exp -8 solar mass, implying an L* galaxy is resolved by approximately 1000 particles. The system is evolved self-consistently in three dimensions using the combined N-body/hydrodynamic scheme P3MSPH up to a final redshift z = 1. Evolving to the present is prohibited by the fact that the mean density in the simulated volume is above critical and the entire volume would be going nonlinear beyond this point, We are currently analyzing another run with somewhat poorer mass resolution which was evolved to the present.

Evrard, August E.↗

Constructing the Coronal Magnetic Field by Correlating Parameterized Magnetic Field Lines with Observed Coronal Plasma Structures

A method is presented for constructing the coronal magnetic field from photospheric magnetograms and observed coronal loops. A set of magnetic field lines generated from magnetogram data is parameterized and then deformed by varying the parameterized values. The coronal flux tubes associated with this field are adjusted until the correlation between the field lines and the observed coronal loops is maximized. A mathematical formulation is described which ensures that (1) the normal component of the photospheric field remains unchanged, (2) the field is given in the entire corona over an active region, (3) the field remains divergence-free, and 4electric currents are introduced into the field. It is demonstrated that a parameterization of a potential field, comprising a radial stretching of the field, can provide a match for a simple bipolar active region, AR 7999, which crossed the central meridian on 1996 November 26. The result is a non-force-free magnetic field with the Lorentz force being of the order of 10(exp -5.5) g per s(exp 2) resulting from an electric current density of 0.79 micro A per m(exp 2). Calculations show that the plasma beta becomes larger than unity at a strong non-radial currents requires low height of about 0.25 solar radii supporting the non-force-free conclusion. The presence of such strong non-radial currents requires large transverse pressure gradients fo maintain a magnetostatic atmosphere, required by the relatively persistent nature of the coronal structures observed in AR 7999. This scheme is an important tool in generating a magnetic field solution consistent with the coronal flux tube observations and the observed photospheric magnetic field.

Allen, Gary G.↗

Constructing the Coronal Magnetic Field: by Correlating Parameterized Magnetic Field Lines with Observed Coronal Plasma Structures

The reconstruction of the coronal magnetic field is carried out using a perturbation procedure. A set of magnetic field lines generated from magnetogram data is parameterized and then deformed by varying the parameterized values. The coronal fluxtubes associated with this field are adjusted until the correlation between the field lines and the observed coronal loops is maximized. A mathematical formulation is described which ensures (1) that the normal component of the photospheric field remains unchanged, (2) that the field is given in the entire corona, (3) that the field remains divergence free, and (4) that electrical currents are introduced into the field. It is demonstrated that a simple radial parameterization of a potential field, comprising a radial stretching of the field, can provide a match for a simple bipolar active region, AR 7999, which crossed the central meridian on 1996 Nov 26. At a coronal height of 30 km, the resulting magnetic field is a non-force free magnetic field with the maximum Lorentz force being on the order of 2.6 x 10(exp -9) dyn resulting from an electric current density of $0.13 mu A/ sq m. This scheme is an important tool in generating a magnetic field solution consistent with the coronal flux tube observations and the observed photospheric magnetic field.

Gary, G. A.↗

Snow Grain Size Retrieval over the Polar Ice Sheets with the Ice, Cloud and Land Elevation Satellite (ICESat) Observations

Snow grain size is an important parameter for cryosphere studies. As a proof of concept, this paper presents an approach to retrieve this parameter over Greenland, East and West Antarctica ice sheets from surface reflectances observed with the Geoscience Laser Altimeter System (GLAS) onboard the Ice, Cloud, and land Elevation Satellite (ICESat) at 1064 nanometers. Spaceborne lidar observations overcome many of the disadvantages in passive remote sensing, including difficulties in cloud screening and low sun angle limitations; hence tend to provide more accurate and stable retrievals. Results from the GLAS L2A campaign, which began on 25 September and lasted until 19 November, 2003, show that the mode of the grain size distribution over Greenland is the largest (approximately 300 microns) among the three, West Antarctica is the second (220 microns) and East Antarctica is the smallest (190 microns). Snow grain sizes are larger over the coastal regions compared to inland the ice sheets. These results are consistent with previous studies. Applying the broadband snow surface albedo parameterization scheme developed by Garder and Sharp (2010) to the retrieved snow grain size, ice sheet surface albedo is also derived. In the future, more accurate retrievals can be achieved with multiple wavelengths lidar observations.

ice↗

The Prediction of Transonic Flows on an Advancing Rotor

The object of this investigation was to find and demonstrate a means of performing efficient finite-difference computations of rotor loading for a trimmed rotor in high-speed, forward flight. The essence of the scheme that was developed is a loose-coupled iteration procedure between a finite difference and a comprehensive integral rotor code. The coupling involves a transfer of appropriate load and inflow data on the advancing side between the two codes such that consistency maintained. Sample computations, including a limited comparison with model rotor data, are presented. The scheme converges rapidly. However, even one iteration with this scheme can provide sufficient accuracy for many purposes.

Tung, Chee↗

Permanent Magnet Synchronous Condenser with Solid State Excitation

A synchronous condenser consists of a free-spinning wound-field synchronous generator and a field excitation controller. In this paper, we propose a synchronous generator that employs a permanent magnet synchronous generator (PMSG) instead of a wound-field machine. PMSGs have the advantages of higher efficiency and reliability. In the proposed configuration, the reactive power control is achieved by a voltage source converter connected in series with the PMSG and the grid. The converter varies the phase voltage of the PMSG so as to create the same effect of over or under excitation in a wound-field machine. The converter output voltage level controls the amount and the direction of the produced reactive power and the voltage's phase is kept in-phase with the grid voltage except a slight phase can be introduced so that some power can be drawn from the grid for maintaining the DC bus voltage level of the converter. Since the output voltage of the converter is only a fraction of the line voltage, its VA rating is only a fraction of the rating of the PMSG. The proposed scheme is shown to be effective by computer simulation.

17 WIND ENERGY↗

Progress in Grid Generation: From Chimera to DRAGON Grids

Hybrid grids, composed of structured and unstructured grids, combines the best features of both. The chimera method is a major stepstone toward a hybrid grid from which the present approach is evolved. The chimera grid composes a set of overlapped structured grids which are independently generated and body-fitted, yielding a high quality grid readily accessible for efficient solution schemes. The chimera method has been shown to be efficient to generate a grid about complex geometries and has been demonstrated to deliver accurate aerodynamic prediction of complex flows. While its geometrical flexibility is attractive, interpolation of data in the overlapped regions - which in today's practice in 3D is done in a nonconservative fashion, is not. In the present paper we propose a hybrid grid scheme that maximizes the advantages of the chimera scheme and adapts the strengths of the unstructured grid while at the same time keeps its weaknesses minimal. Like the chimera method, we first divide up the physical domain by a set of structured body-fitted grids which are separately generated and overlaid throughout a complex configuration. To eliminate any pure data manipulation which does not necessarily follow governing equations, we use non-structured grids only to directly replace the region of the arbitrarily overlapped grids. This new adaptation to the chimera thinking is coined the DRAGON grid. The nonstructured grid region sandwiched between the structured grids is limited in size, resulting in only a small increase in memory and computational effort. The DRAGON method has three important advantages: (1) preserving strengths of the chimera grid; (2) eliminating difficulties sometimes encountered in the chimera scheme, such as the orphan points and bad quality of interpolation stencils; and (3) making grid communication in a fully conservative and consistent manner insofar as the governing equations are concerned. To demonstrate its use, the governing equations are discretized using the newly proposed flux scheme, AUSM+, which will be briefly described herein. Numerical tests on representative 2D inviscid flows are given for demonstration. Finally, extension to 3D is underway, only paced by the availability of the 3D unstructured grid generator.

Liou, Meng-Sing↗

The prediction of transonic flows on advancing rotors

The object of this investigation was to find and demonstrate a means of performing efficient finite-difference computations of rotor loading for a trimmed rotor in high-speed, advancing flight. The essence of the scheme that was developed is a loose-coupled iteration procedure between a finite difference and a comprehensive integral rotor code. The coupling involves a transfer of appropriate load and inflow data between the two codes such that consistency is maintained. Sample computations, including a limited comparison with model rotor data, are presented. The scheme converges rapidly. The finite-difference computation of one rotor revolution with this scheme may provide sufficient accuracy for many purposes.

Tung, C.↗

Navier-Stokes Dynamics by a Discrete Boltzmann Model

This work investigates the possibility of particle-based algorithms for the Navier-Stokes equations and higher order continuum approximations of the Boltzmann equation; such algorithms would generalize the well-known Pullin scheme for the Euler equations. One such method is proposed in the context of a discrete velocity model of the Boltzmann equation. Preliminary results on shock structure are consistent with the expectation that the shock should be much broader than the near discontinuity predicted by the Pullin scheme, yet narrower than the prediction of the Boltzmann equation. We discuss the extension of this essentially deterministic method to a stochastic particle method that, like DSMC, samples the distribution function rather than resolving it completely.

Rubinstein, Robet↗

Improvements in Global Climate Model Microphysics Using a Consistent Representation of Ice Particle Properties

This paper describes a new approach for representing ice microphysics in climate models. In contrast with most previous schemes, this approach does not include separate categories for cloud and precipitating ice and instead uses a single two-moment category to represent all solid hydrometeors. Thus, there is no need for an ice “autoconversion” size threshold parameter, which has a critical impact on simulated climate in the Community Atmosphere Model (CAM5) yet is poorly constrained by theory or observations. Further, in the new treatment, all ice microphysical processes and parameters, including ice effective radius and mean fall speed, are formulated self-consistently and flexibly based on empirical ice particle mass–size and projected area–size relationships. This means that the scheme can represent the physical coupling between bulk particle density, mean fall speed, and effective radius, which is not possible in current schemes. Two different methods for specifying these relationships based on observations are proposed. The new scheme is tested in global simulations using CAM5. Differences in simulations using the two methods for specifying the mass– and projected area–size relationships, particularly the cloud radiative forcing, are attributable mainly to the effects on mean ice particle fall speed, impacting sedimentation and ice water path. With some tuning of parameters involved in calculating homogeneous freezing it produces a similar climate compared to the simulations using the original CAM5 microphysics. Thus, it can produce a comparable climate while improving the physical basis and self-consistency of ice particle properties and parameters.

54 ENVIRONMENTAL SCIENCES↗

Particle detection through the quantum counter concept in YAG:Er{sup 3+}

We report on a scheme for particle detection based on the infrared quantum counter concept. Its operation consists of a two-step excitation process of a four level system, which can be realized in rare earth-doped crystals when a cw pump laser is tuned to the transition from the second to the fourth level. The incident particle raises the atoms of the active material into a low lying, metastable energy state, triggering the absorption of the pump laser to a higher level. Following a rapid non-radiative decay to a fluorescent level, an optical signal is observed with a conventional detector. In order to demonstrate the feasibility of such a scheme, we have investigated the emission from the fluorescent level {sup 4}S{sub 3∕2} (540 nm band) in an Er{sup 3+}-doped YAG crystal pumped by a tunable titanium sapphire laser when it is irradiated with 60 keV electrons delivered by an electron gun. We have obtained a clear signature that this excitation increases the {sup 4}I{sub 13∕2} metastable level population that can efficiently be exploited to generate a detectable optical signal.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Mimetic Theory for Cell-Centered Lagrangian Finite Volume Formulation on General Unstructured Grids

A finite volume cell-centered Lagrangian scheme for solving large deformation problems is constructed based on the hypo-elastic model and using the mimetic theory. Rigorous analysis in the context of gas and solid dynamics, and arbitrary polygonal meshes, is presented to demonstrate the ability of cell-centered schemes in mimicking the continuum properties and principles at the discrete level. A new mimetic formulation based gradient evaluation technique and physics-based, frame independent and symmetry preserving slope limiters are proposed. Furthermore, a physically consistent dissipation model is employed which is both robust and inexpensive to implement. The cell-centered scheme along with these additional new features are applied to solve solids undergoing elasto-plastic deformation.

42 ENGINEERING↗

Dissipative issue of high-order shock capturing schemes with non-convex equations of state

It is well known that, closed with a non-convex equation of state (EOS), the Riemann problem for the Euler equations allows non-standard waves, such as split shocks, sonic isentropic compressions or rarefaction shocks, to occur. Loss of convexity then leads to non-uniqueness of entropic or Lax solutions, which can only be resolved via the Liu-Oleinik criterion (equivalent to the existence of viscous profiles for all admissible shock waves). This suggests that in order to capture the physical solution, a numerical scheme must provide an appropriate level of dissipation. A legitimate question then concerns the ability of high-order shock capturing schemes to naturally select such a solution. To investigate this question and evaluate modern as well as future high-order numerical schemes, there is therefore a crucial need for well-documented benchmarks. A thermodynamically consistent C{sup {infinity}} non-convex EOS that can be easily introduced in Eulerian as well as Lagrangian hydrocodes for test purposes is here proposed, along with a reference solution for an initial value problem exhibiting a complex composite wave pattern (the Bizarrium test problem). Two standard Lagrangian numerical approaches, both based on a finite volume method, are then reviewed (vNR and Godunov-type schemes) and evaluated on this Riemann problem. In particular, a complete description of several state-of-the-art high-order Godunov-type schemes applicable to general EOSs is provided. We show that this particular test problem reveals quite severe when working on high-order schemes, and recommend it as a benchmark for devising new limiters and/or next-generation highly accurate schemes.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Development of a three-dimensional APOLLO3 neutrons deterministic scheme for the CABRI reactor

CABRI is an experimental reactor to study the fuel behavior during reactivity injection transients. These transients being highly multiphysics, the development of suitable modeling and simulation tools to simulate them is important for the optimization of the tests and the control of the experimental conditions. This paper focuses on the development of an APOLLO3 deterministic core calculation tool dedicated to the CABRI transient analysis. It represents the first stage of the incremental process for the implementation of a multiphysics time-dependent modeling of the CABRI transient. The neutron calculation scheme is based on a classical two-step approach. The first step consists of a 281-energy group calculation flux with the TDT-MOC (Method Of Characteristics) solver for cross-section space and energy (23 groups) collapsing for the CABRI different assembly clusters. The bias on a 2D core neutron calculation due to the self-shielding calculation and collapsing on a restricted pattern are investigated thanks to a comparison with a direct full 2D calculation on a quarter of core. The second step relies on a pin-resolved transport 3D transport core calculation with the SN solver MINARET. A progressive numerical validation process is followed to quantify the calculation biases on reactivity and reaction rates at each step using reference calculations with the stochastic code TRIPOLI4. The next development stage toward a multiphysics scheme will be the implementation of the 3D-kinetics equation resolution and the coupling with a core thermal-hydraulics model. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗