Search NASA⌕ Search

SEARCH · Search NASA

Results for “content model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Beneficial effect of copper on pitting resistance of Ni-Cr-Fe alloys

This study examines the effect of copper alloying on pitting resistance in a model solid solution FCC Ni-13%Cr-10%Fe alloy through potentiodynamic and potentiostatic polarization in 0.1 M NaCl in conjunction with an analysis using first-principles competitive electro-chemisorption modeling. The pitting potential increased with increasing Cu content in the alloy. Furthermore, the extent of metastable pit growth was suppressed and the incubation time for metastable to stable pit transition increased with Cu content. The first-principles competitive adsorption calculations suggested that Cu alloying suppresses chloride ion adsorption on the alloy surface in a simulated pit environment, which inhibits active dissolution at the pit bottom, enhances proton adsorption, and thereby increases the local pH at the pit bottom. In conclusion, we propose that these two effects of Cu in solid solution combine to reduce pit stability and may act in addition to the enrichment of Cu on the corroding pit surface.

36 MATERIALS SCIENCE↗
DOE OSTI2024

New insights on the effects of chemistry and temperature on α’ precipitation during aging of FeCrAl alloys

Here, the effect of Al on α' precipitation in FeCrAl alloys was studied through thermal aging of several model binary FeCr and FeCrAl alloys with Cr content of 13 wt.%, 17 wt.%, and 25 wt.% with and without 5.5 wt.% Al. Aging was performed up to 1,000h at varying temperatures from 400-500°C. At 400°C no age hardening was observed due to slow kinetics at this temperature. For both the 17Cr and 25Cr alloys, the addition of Al shows a lowering of the miscibility gap, consistent with other reports in literature. Interestingly, however, for the 25Cr alloys the addition of Al in the FeCrAl ternary alloy accelerated α' precipitation below the miscibility gap. Such enhanced precipitation has also been predicted by our atomistic kinetic Monte Carlo (AKMC) simulations. While previous literature has often focused on Al suppressing α', here we show that while Al can lower the miscibility gap in the Fe-Cr ferritic system thermodynamically, it may also enhance the kinetics of precipitation.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Sensitivity study of coupled chemical-CFD simulations for analyzing aluminum-clad spent nuclear fuel storage in sealed canisters

We report the United States Department of Energy (DOE) manages over 50 Metric Tons Heavy Metal (MTHM) of aluminum-clad spent nuclear fuel. One main source for DOE’s Aluminum-clad spent nuclear fuel (ASNF) inventory is the advanced test reactor (ATR) at the INL site, which makes this fuel of particular interest for storage scenarios. Road-ready and final disposition packaging configurations for the ATR fuel dictates storage within helium-backfilled, sealed DOE standard canisters. The conditions within these sealed canisters for extended (greater than50 year dry) storage is of interest. To further this goal, a three-dimensional (3D) multi-physics computational fluid dynamics (CFD) model is developed of the sealed DOE standard canisters. This 3D CFD model is one-way coupled with bulk gas radiolysis reactions considering sealed canisters with inert gas and possible trace amounts of air and water vapor. This study looks at the evolution of the thermal history of the canisters over a 50 year time period with a coupling to the chemical reactions occurring from radiolytic breakdown of residual water. A sensitivity study is then carried out over the parameters of the model including the fuel decay heat, residual water content, sealed pressure, canister external temperature, and canister emissivity. In pure helium, hydrogen generation rates are low, under 10 ppm, but hydrogen generation rates are affected greatly by the presence of even 1% residual air, increasing by 50-plus-fold, and nitric acid generation with residual air also occurs ranging from 500 to 4000 ppm after 50 years. The fuel decay heat and the residual water content show the most importance in the generation of hydrogen gas in pure air, and for nitric acid with a residual air condition. External temperature, canister emissivity and sealed pressure all show minor sensitivity effects to the generation of potentially harmful species.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2025

Predictive Assessment of the Chemical Composition of Coal Ash in Reserve at U.S. Disposal Sites

In the United States, more than 2 Gt of coal combustion residuals (i.e., coal ash) are stored in hundreds of disposal units. Recent federal regulations mandate the closure or retrofitting of most coal ash impoundments, presenting significant challenges for waste management. These regulatory pressures also present opportunities to reuse coal ash. However, the quality and quantity of discarded coal ash across the U.S. are not well known, even though this information is crucial for spurring its reuse for conventional and new material applications. This study describes a predictive model for the major element composition of coal ash in reserve at disposal sites of major U.S. coal-fired power plants. This model was constructed from coal purchase records of 705 power stations from 1973 to 2022 and was trained on coal ash composition data, showing that coal ash elemental composition is strongly associated with the source of feedstock coal. The model showed regional shifts in the major element contents of ash produced by power plants in the last 50 years, particularly for calcium and iron (expressed as %CaO and %Fe2O3), as power stations changed their source of coal over this time frame. Our approach enables an estimation of chemical composition for ash stored in waste impoundments at individual power stations. Such information can help to delineate the regional market resource potential of supplementary cements for concrete and other material innovations that would utilize coal ash harvested from disposal sites across the U.S.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2020

Continuous-Flow Centrifugal Solid/Liquid Separation for the Recovery of Rare-Earth Elements Containing Particles from Phosphoric Acid Sludge

Phosphoric acid sludge contains acid (~54% P 2 O 5 ) and solid precipitates including rare earth elements (REEs) at concentrations of ~2200 ppm. Low-cost recovery of valuable P 2 O 5 and simultaneous solid separation could be an economically feasible approach to recovering REEs while increasing the production of phosphoric acid. The sludge, however, is a complicated stream that cannot be separated by traditional technologies because of high viscosity and a large solid content (30–40%). Guided by a force balance model, an efficient solid/liquid separation method is demonstrated, using a continuous-flow centrifugal contactor. Additionally, the shear regime is bypassed by introducing the sludge directly into the rotor where a centrifugal force is exerted on the fluid, inducing phase separation. Solid particles are trapped in the contactor. High liquid recovery is demonstrated and the effects of process parameters on solid capture are investigated. Three contactors in series yield 94% recovery of solids containing 1500–2895 ppm of REEs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

The Influence of Charge Correlation and Ion Solvation on the Phase Behavior of Single-Ion Conducting Polymer Blend Electrolytes Using SAXS/SANS

Single-ion conducting polymer blends (SICPBs) have demonstrated exceptional electrochemical performance as solid-state battery electrolytes; however, their nanoscale morphology and thermodynamic behavior remain unexplored. In this work, we investigate blends composed of deuterated poly(ethylene oxide) and poly[lithium sulfonyl(trifluoromethane sulfonyl)imide methacrylate], dPEO/P(LiMTFSI), and report the first experimental study of the nanostructures of charge-neutral polymer blends using small-angle neutron scattering (SANS) and small-angle X-ray scattering (SAXS). Despite the macroscopic miscibility indicated by a single glass-transition temperature, SANS and SAXS results reveal disordered, charge-correlated nanostructures that are strongly influenced by blend composition and temperature. At low concentrations of charge polymer, the scattering is dominated by concentration fluctuations, and the random phase approximation is applied to extract values of the Flory–Huggins interaction parameter, χ SC . At higher charged polymer content, concentration fluctuations are suppressed, and a correlation model is used to characterize the nanostructures of the charge correlations. We find that the structures of the charge correlations are highly dependent on blend composition─consistent with predictions from Sing’s self-consistent field theory-liquid state models. Understanding these features is essential for uncovering the ion transport mechanism that leads to improved electrochemical performance previously reported in SICPB systems.

25 ENERGY STORAGE↗
DOE OSTI2020

Minimal realizations of Dirac neutrino mass from generic one-loop and two-loop topologies at d =5

We carry out a systematic investigation for the minimal Dirac neutrino mass models emerging from generic one-loop and two-loop topologies that arise from d = 5 effective operator with a singlet scalar, σ. To ensure that the tree-level Dirac mass, as well as Majorana mass terms at all orders, are absent for the neutrinos, we work in the framework where the Standard Model is supplemented by the well-motivated U(1)B-L gauge symmetry. At the one-loop level, we analyze six possible topologies, out of which two of them have the potential to generate desired Dirac neutrino mass. Adopting a systematic approach to select minimal models, we construct seventeen viable one-loop Dirac neutrino mass models. By embracing a similar methodical approach at the two-loop, we work out twenty-three minimal candidates. Among the forty selected economical models, the majority of the models proposed in this work are new. In our search, we also include the scenarios where the particles in the loop carry charges under the color group. Furthermore, we discuss the possible dark matter candidates within a given model, if any, without extending the minimal particle content.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Multimaterial Aerosol Jet Printed Magnetic Nanocomposites for Microwave Circuits

Here this article demonstrates the process and characterization of additively manufactured polymer-matrix magnetic nanocomposites. These nanocomposites are composed of nickel-zinc ferrite (Ni 0.5 Zn 0.5 Fe 2 O 4 ) nanoparticles in a polyimide matrix. These materials are printed using multimaterial aerosol jet printing where aerosols of nickel-zinc ferrite and polyimide inks are mixed in place to fabricate structures with nonunity relative permeability. To characterize these materials, we use energy-dispersive X-ray spectroscopy to estimate the content of ferrite in the composite, fitted simulation models, and ring resonator measurements to estimate the permeability. In fully aerosol jet printed 1-mm 2 inductors, we demonstrate an increase in inductance density of 40% in a 4.5-turn microstrip spiral inductor using this printed composite. These fully printed inductors demonstrate an inductance density of 4.2-nH/mm 2 . EDS analysis shows films with 18 wt.% Ni 0.5 Zn 0.5 Fe 2 O 4 . Finally, we show microstrip transmission lines on printed composite compared to the same on polyimide subjected to a dc magnetic bias, displaying a magnetic resonance behavior.

42 ENGINEERING↗
DOE OSTI2020

Calibration and modification of the constitutive model for the mechanical response of P91

The objective of this first milestone was to calibrate and if necessary, modify a constitutive model predicting the primary and secondary creep response of P91. The overall path to be followed consists of first calibrating this constitutive model against experimental data available from the literature (this milestone). In parallel, data acquired by indentation tests will be used to calibrate the model (this involves transforming the indentation data into equivalent uniaxial tests). An overall comparison of model parameters will allow assessing to what extent these rapid tests can be used to calibrate models predicting the overall mechanical response of the bulk. Given that COVID naturally hindered the gathering of new experimental data, the choice was made to ensure that LANL would have sufficient funds in year two to perform the bulk of the new calibration work. The following report details (i) how and which of the bulk experimental data was selected, (ii) constitutive model formulation, (iii) predictions of the constitutive model: effects of imposed stress, temperature and precipitate content, (iv) future work.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2020

Cosmic Growth Rate as Probe of Dark Matter and Gravity. Final Report

Some 95% of the energy content of the universe lies outside the standard model of particle physics, with approximately 70% arising from physics that accelerates cosmic expansion in opposition to normal gravity and about 25% dark matter that clusters under gravity but does not interact directly with light. This project made significant advances in developing methods to extract information on the former – dark energy or modified gravity – and latter – dark matter through their effects on the expansion history of the universe and the cosmic growth of large scale structures under the influence of gravity and dark energy. These results directly benefit experimental/observational cosmic surveys of large scale structure imaging hundreds of millions of galaxies and mapping spectroscopically the 3D positions of tens of millions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
NASA NTRS1973

The midlatitude ionospheric response to fluctuations in solar activity under low geomagnetic activity conditions

The ionospheric response, which is the sensitivity and delay of the electron content to the 270 day fluctuations of solar radiation has been theoretically analyzed. In the context of the present work the sensitivity is defined as the magnitude of the electron content fluctuation for a given change in solar flux, and the delay is defined as the timeshift of the response of the electron content to fluctuations in solar flux. Both the model in which the action of neutral winds on the F-2 layer is disregarded and that in which the wind effect is included as part of a positive feedback mechanism, are studied. It is shown that the neutral winds play a dominant role in the mentioned ionospheric response. The computed delays decrease with increasing solar activity in both models.

Bendito, J. L.↗
NASA NTRS1978

Further studies of trace elements in C3 chondrites

Five carbonaceous chondrites (Renazzo C2V, Allende C3V, Ornans C3O, Warrenton C3O, and Orgueil C1) were analyzed by radiochemical neutron activation analysis for 20 elements. Elements condensing between approximately 700 and 420 K are systematically more depleted than those condensing between 1000 and 900 K, and the depletion correlates inversely with matrix content and directly with degree of metamorphism. A model of gas-dust fractionation during condensation, by settling of dust to the median plane of the nebula, is proposed. Gas/dust ratios relative to the cosmic ratio ranged from 0.7 at 1000 K to 0.5 at 700 K for C3O chondrites that accreted first and from 1.3 to 0.6 for the last. No further gas/dust fractionation was indicated below 700 K

Takahashi, H.↗
NASA NTRS1978

Effect of aerosols on the estimation of total ozone in an atmospheric column from the measurements of its ultraviolet radiance

The problem of estimating the total ozone amount of an atmospheric column in the presence of stratospheric and tropospheric aerosols is studied by means of simulated spectral measurements for the five-wavelength Nimbus 4 BUV configuration and the six-wavelength Nimbus G TOMS configuration, and by analyzing such measurements with appropriate total ozone estimation procedures. The simulated spectral measurements were generated for forty different atmospheric models arrived at by varying the total ozone content and various aerosol parameters. A total of ten different values of the solar zenith angle and eight different values of the Lambert reflectivity of the underlying surface were used. It was found that the values of total ozone in an atmospheric column estimated by the five-wavelength procedure can be in error by about + or -2% as a result of particulate contamination encountered in the terrestrial atmosphere under average conditions. Errors due to tropospheric particulate contamination can be reduced significantly by taking appropriate advantage of the additional spectral measurement offered by the Nimbus G TOMS instrument.

Dave, J. V.↗
NASA NTRS1987

The effect of V2O5 on the growth and properties of Bi-YIG

The effect of V2O5 additions to PbO-Bi2O3 flux was investigated with respect to the properties of Bi-YIG epitaxial films for magnetic bubble devices. The Bi content of the films (including an estimated 10 percent Pt(2+) were calculated from Faraday rotation measurements. For films grown at constant supercooling, the Bi content increased by 60 percent as the V2O5 content of the flux was increased from 0 to 9 mol pct. Lattice constant data were shown to agree with measured Bi and Ca-Si contents. The growth-induced magnetic anisotropy increased proportionally to the Bi content and could be fairly represented by a model; however, the coefficients of the model vary widely between data sets for different melt compositions.

Luther, L. C.↗
NASA NTRS1988

High-resolution Interferometer Sounder (HIS), phase 2

The High-resolution Interferometer Sounder (HIS) was successfully built, tested, and flight proven on the NASA U-2/ER-2 high altitude aircraft. The HIS demonstration has shown that, by using the technology of Fourier Transform Spectroscopy (FTS), it is possible to measure the spectrum of upwelling infrared radiance needed for temperature and humidity sounding with high spectral resolution and high radiometric precision. By resolving individual carbon dioxide lines, the retrieved temperature profiles have vertical resolutions of 1 to 2 km and RMS errors less than 1 C, about 2 to 4 times better than possible with current sounders. Implementing this capability on satellite sounders will greatly enhance the dynamical information content of temperature measurements from space. The aircraft model HIS is now a resource which should be used to support field experiments in mesoscale meteorology, to monitor trace gas concentrations and to better understand their effects on climate, to monitor the surface radiation budget and the radiative effects of clouds, and to collect data for research into retrieval techniques, especially under partially cloudy conditions.

Source record↗
NASA NTRS1996

A Near-Global Survey of Cirrus Particle Size Using ISCCP

Cirrus is the most frequently occurring and widely distributed cloud type. The average annual frequency of occurrence for cirrus is 34% and its global coverage is about 20-30% (Warren et al. 1985). It strongly influences weather and climate processes through its effects on the radiation budget of the earth and the atmosphere (Liou 1986). Microphysics of cirrus is a critical component in understanding cloud-climate radiative interactions. For example, ice water content feedback is positive from a 1-D model study. But the feedback is substantially reduced upon the inclusion of small ice crystals (Sinha and Shine 1994). Due to the complexity caused by the non-spherical shape of ice crystals in cirrus, retrievals of cirrus properties are difficult. In recent years, advances have been made both in models and in case studies (e.g., Takano and Liou 1989, Young et al. 1994), but no global scale survey has been conducted. Similar to our previous near-global survey of droplet sizes of liquid water clouds (Han et al. 1994), a survey of cirrus ice crystal sizes is conducted over both continental and oceanic areas. We describe a method for retrieving cirrus particle size information on a near-global scale 50 deg S to 50 deg N using currently available satellite data from ISCCP. To retrieve cirrus particle size, we use a radiative transfer model that includes all major absorbing gases and cloud scattering/absorption to compute synthetic radiances as a function of satellite viewing geometry. Ice crystal shapes are assumed to be hexagonal columns and plates. The model results have been validated against clear sky observations and are consistent with the observed radiance range under cloudy conditions.

Han, Qingyuan↗
NASA NTRS1997

Biospheric Effects of the Chicxulub Impact and Their Role in the Cretaceous/Tertiary Mass Extinction

A comprehensive analysis of volatiles in the Chicxulub impact strongly supports the hypothesis that impact-generated sulfate aerosols caused over a decade of global cooling, acid rain, and disruption of ocean circulation, which contributed to the mass extinction at the Cretaceous/Tertiary (K/T) boundary. The crater size, meteoritic content of the K/T boundary clay, and impact models indicate that the Chicxulub crater was formed by a short period comet or an asteroid impact that released 0.7-3.4 x 10(exp 31) ergs of energy. Impact models and experiments combined with estimates of volatiles in the projectile and target rocks predict that over 200 gigatons (Gt) each of SO2 and water vapor, and over 500 Gt of CO2, were globally distributed in the stratosphere by the impact.

Pope, Kevin O.↗