Search NASA⌕ Search

SEARCH · Search NASA

Results for “delay”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

DeepONet-Assisted Optimization of Surface Topography for Transition Delay in a Mach 4.5 Boundary Layer

We use deep learning, an ensemble variational technique (EnVar), and direct numerical simulations(DNS) to design an optimal topography for a two-dimensional roughness element that delays the on-set of laminar-turbulent transition in a Mach 4.5 flat-plate boundary layer. Deep operator networks (DeepONets), which have the known ability to learn complex nonlinear operators within dynamical systems, are used for machine learning. For the baseline configuration of a smooth flat plate, the second-mode waves at the DNS inflow cause a quick nonlinear breakdown of the high-speed boundary layer within the computational domain. Results reported in the present study validate the ability of DeepONets to model the transition delay via a given topography of the roughness element. The computing cost to optimize the rough-ness element for minimal skin-friction drag is substantially lowered by the DeepONets-based reduced-order model. In comparison to the baseline method of EnVar optimization based on DNS alone, the DeepONets-based EnVar optimizer is able to delay transition past the outflow boundary of the computational domain while utilizing almost 5–6 times fewer DNS.

Machine Learning↗

4K High Definition Video and Audio Streaming Across High-rate Delay Tolerant Space Networks

Audio and video streaming across delay tolerant networks are relatively new phenomena. During the Apollo 11 mission, video and audio were streamed directly back to Earth using fully analog radios. This streaming capability atrophied over time due to the gradual conversion to digital electronics accompanied with higher resolutions causing the required bit rates to outpace communication link performance. Additionally, 21st century space systems face the new requirement of interconnectedness. Delay Tolerant Networking (DTN) attempts to solve this requirement by uniting traditional point to point links into a robust and dynamic network. However, In order to avoid system bottlenecks, the High-Rate Delay Tolerant Networking (HDTN) implementation focuses on performance-optimization of the standards. This work extends the functionality of HDTN by implementing audio and video streaming, with the goal of demonstrating the practical application of high definition media streaming across space networks. A series of network topologies were created including simple point to point links and multi-node multi-hop networks. Test media in the form of prerecorded and live footage was streamed across the network. A set of objective quality metrics were established in order to measure the stream quality. A lunar network was emulated using a mixture of embedded ARM platforms.

Kyle J Vernyi↗

Delayed gamma technique for fissile material assay

Research sponsored by the Next Generation Safeguards Initiative are investigating several non-destructive assay techniques for the quantification of fissile plutonium mass in spent nuclear fuel assemblies. AppHcation of the delayed gamma signatures is investigated in this context. The objective of the research is to assess whether the delayed gamma assay instrument can provide sufficient sensitivity, isotope specificity and accuracy as required in nuclear material safeguards. This effort includes theoretical and experimental components for the optimal combination of interrogation parameters. A new modeling algorithm offering a high level of detail was developed specifically for this purpose and was validated in series of benchmark experiments. Preliminary modeling of the delayed gamma response from spent fuel assemblies was accomplished offering a future direction for the design process.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

UWB delay and multiply receiver

An ultra-wideband (UWB) delay and multiply receiver is formed of a receive antenna; a variable gain attenuator connected to the receive antenna; a signal splitter connected to the variable gain attenuator; a multiplier having one input connected to an undelayed signal from the signal splitter and another input connected to a delayed signal from the signal splitter, the delay between the splitter signals being equal to the spacing between pulses from a transmitter whose pulses are being received by the receive antenna; a peak detection circuit connected to the output of the multiplier and connected to the variable gain attenuator to control the variable gain attenuator to maintain a constant amplitude output from the multiplier; and a digital output circuit connected to the output of the multiplier.

47 OTHER INSTRUMENTATION↗

Evaluating the Coda Phase Delay Method for Determining Temperature Ratios in Windy Environments

We evaluate the acoustic coda phase delay method for estimating changes in atmospheric phenomena in realistic environments. Previous studies verifying the method took place in an environment with negligible wind. The equation for effective sound speed, which the method is based upon, shows that the influence of wind is equal to the square of temperature. Under normal conditions, wind is significant and therefore cannot be ignored. Results from this study con rm the previous statement. The acoustic coda phase delay method breaks down in non-ideal environments, namely those where wind speed and direction varies across small distances. We suggest that future studies make use of gradiometry to better understand the effect of wind on the acoustic coda and subsequent phase delays.

54 ENVIRONMENTAL SCIENCES↗

Identification of Critical Airports from the Perspective of Delay and Disruption Propagation in Air Travel Networks

It is well-known that delays and disruptions that originate at certain airports end up spreading spread on the network to other airports, sometimes straining a large fraction of the system. Hence data-driven modeling of this phenomenon is important from the standpoint of planning and strategy. In this work, utilizing the publicly available data from the Federal Aviation Administration (FAA), we employ the well-known influence maximization paradigm, to mine for the top airports in the US airport network, from the perspective of delay spread. In the process, we develop a diffusion simulator and implement a greedy algorithm to aid our task. We then explore the temporal trends by considering one winter month and one summer month in our analysis. Finally, we characterize the clusters in the US airport network and investigate the patterns of delay spread when airports in each of the clusters are affected.

Visweswara Sathanur, Arun↗

Examination of Digital-Delay Rossi-$\alpha$ for 252 Cf-Driven Highly Enriched Uranium Using Organic Scintillators

Neutron noise techniques constitute several analysis methods applicable to non-destructive assay. One technique is the Rossi-α method to calculate the prompt neutron decay constant (α) or its inverse, the prompt neutron period (1/α), for assemblies of fissionable material. This work evaluates a high-data-throughput measurement at the National Criticality Experiments Research Center (NCERC) with organic scintillators measuring a subcritical assembly of highly enriched uranium (HEU) metal (93% 235 U). The assembly comprises hemi shells stacked together to form fully closed shells and is driven by a Cf source at the center. The assembly is a total of 59.85 kg HEU and a k eff of 0.99, according to MCNP6.2 KCODE simulations. Measurements were acquired with a three-by-four array of 5.08-cm-diameter by 5.08-cm-length trans-stilbene crystals 166 cm from the assembly center. Two types of coincident binning methods are used to build the Rossi-α distribution of coincident neutron detections: A) type 1 binning, also known as any-and-all forward time differences, and B) type 1 binning with a digital-delay technique that is analogous to Orndoff’s use of delay cabling in early Rossi-alpha measurements. Method B) disregards same-detector coincidences and once all nearest time coincidences are collected between all detectors after a trigger, a time delay of 0.75 µs is implemented. The measured prompt neutron decay constants for both techniques are calculated from single exponential fits and the two methods are compared. Method A) shows an apparent timing discontinuity near 500 ns time differences. This timing discontinuity interferes with the fitting method used to calculate the prompt neutron decay constant. Method B) mitigates the artificial timing discontinuity and removes the disagreement of the fit. Future work will model the time-dependent detector response to discern why this timing discontinuity occurs, discern how Method B) reduces the amplitude of this timing discontinuity, and apply this method to critical assembly measurements to ultimately confirm the recommendation to use Method B) for high-data-throughput measurements.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Ignition Delay Times and CO Composition during Ethanol Combustion in Miniature Shock Tube

Ignition delay times and composition of CO were measured simultaneously in a miniature high repetition rate shock tube (HRRST) using chemiluminescence and tunable diode laser absorption spectroscopy. Mixtures of 1% ethanol with oxygen and balance argon were tested with equivalence ratios 0.5, 1, and 1.2, over pressure range of 1.6 to 1.8 bar, and temperature range of 1180 to 1400K. Ignition delay times in this range were compared with those in larger shock tubes using several different techniques. One method included using the Livengood-Wu integral (and improved estimates from measured pressure trace). Another method involved direct modeling of conditions in the miniature shock tube using the measured pressure trace. CO composition was measured in parallel with the ignition delay time experiments. Comparison was made with mechanisms in the literature. Experiments were also performed doping CO into the Ar bath gas and conducting two-line CO measurements using TDLAS before ignition. With proper calibration, this measurement is sensitive to temperature.

Sutar, Ashish↗

Effect of Delayed Energy Release on Power Normalization in Reactor Depletion Calculations

Reactor depletion calculations typically assume that the thermal power of the reactor is directly proportional to the instantaneous fission rate within the core. However, approximately 7% of the sensible energy released per fission comes from the radioactive decay of fission products, which occurs alter the fission event. Thus, the assumed direct relationship between reactor power and fission rate implies that all fission products have reached secular equilibrium within the core. In situations where fission product concentrations have not reached equilibrium (e.g., shortly after reactor startup or a change in reactor power during operation), the delayed energy release due to fission product decay creates a nonlinear relationship between reactor power and fission rate. This non-linear relationship, in turn, affects the neutron flux levels and fuel consumption rate required to maintain the desired thermal power output for the reactor. For example, during initial startup of a commercial light water reactor the apparent energy release per fission is ∼7{sup %} lower than the typical value of ∼200 MeV/fission due to the potential energy stored in radioactive fission products. As a consequence, the flux level (and, therefore, uranium consumption rate) in the reactor must be correspondingly higher to preserve the desired reactor power. As the reactor operates and fission product inventories increase, the decay heat produced by the reactor will rise, producing a corresponding increase in the apparent energy release per fission. The characteristic time-dependent behavior of energy release due to the decay of fission products (i.e., decay heat) following reactor startup, shutdown, or changes in reactor power is well-known and widely-used in reactor safety analyses. However, to our knowledge, the effects of time-dependent decay heating rates on reactor depletion calculations have not been thoroughly investigated. In this paper, we present a simple methodology for explicitly accounting for delayed energy release due to the decay of fission products in reactor depletion calculations. In the proposed method, the balance equations for fission product decay energy are incorporated into the depletion coefficient matrix, using a strategy similar to that described by Isotalo in 2016. The modified system of differential equations can be solved via a matrix exponential approximation (or other suitable numerical method) to yield solutions for both nuclide densities and decay energy emission densities as a function of time. Numerical results from the method are presented for simplified (one-group point (0-D) and 1-D) representations of a commercial pressurized water reactor (PWR), in order to estimate the effect of delayed energy release on fuel consumption and flux level immediately following reactor startup.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Speckle contrast from the split-and-delay unit with seeded X-ray pulses of the MID instrument at European XFEL

We report on the coherence properties and characteristics of the split- and-delay unit at the Materials Imaging and Dynamics instrument of the European XFEL under seeded-beam conditions. Our investigation focuses on the speckle contrast extracted from the scattering patterns from static scatterers and pulse splitting characteristics. Seeded-beam operation enabled a high throughput of the split-and-delay unit. We highlight the invaluable potential of the split-and-delay unit for experimental investigations for enhancing our understanding of ultrafast phenomena in molecular liquids, such as water and aqueous solutions.

Fuoss, Paul↗

Integrating Human Factors in Dynamic Rideshare Assignment: Willingness-To-Pay for Delay

Dynamic ride-sharing (DRS) has been projected to be a key solution to lowering system-wide congestion. Despite recent developmental progress, demand studies for DRS suggest low levels of willingness for travelers to use such services. The disconnect between DRS system designs and user preferences limits the application impacts of DRS in the real world. Therefore, this paper aims to design a new DRS trip/vehicle assignment strategy by considering the user preferences of choices under different levels of service. In this study, an agent-based simulation approach is used to model a fleet of shared vehicles that allows DRS. An optimization model is developed to match riders to vehicles while accounting for traveler delay and delay acceptance. Travelers are also dynamically issued predictive discounts, catered to their expected willingness to pay, to incentivize them to accept longer trip delays. Results show that the proposed approach can improve system efficiency by increasing average vehicle occupancy by up to 1.0 persons/trip and DRS acceptance by up to 38.9% depending on fleet size. Additionally, congestion is eased through the decrease of empty vehicle miles traveled by up to 7.1%.

Paul, Joseph↗

A chemical kinetically based ignition delay correlation for iso-octane covering a wide range of conditions including the NTC region

An ignition delay correlation has been developed for iso-octane based on the functional behavior exhibited by a detailed chemical kinetic mechanism. The correlation employs a traditional Arrhenius-based, power law formulation, {tau}=A{phi}{sup {alpha}}p{sup {beta}}{chi}{sub O{sub 2}}{sup {gamma}} x exp ({lambda}), including dependencies for equivalence ratio ({phi}), pressure (p) and oxygen percentage ({chi}{sub O2}). However the exponents for these parameters, {alpha}, {beta}, and {gamma}, respectively, are expressed as third-order polynomials with respect to temperature in order to capture changes in functionality seen across different regimes. At very low temperatures {alpha}, {beta}, and {gamma} are forced to a constant value, as seen within the mechanism. The activation energy term, {lambda}, is written as a combination of two quadratic expressions so that the behavior in the negative temperature coefficient (NTC) region can be captured. A pressure-dependent term is also included in the expression for {lambda} in order to reduce the activation energy at higher pressures in the NTC region due to increased low temperature reactivity, and the appearance of cool flame, or low temperature heat release (LTHR). The resulting expression contains 37 constants. The new correlation is applicable over a wide range of conditions and can be used for data comparisons and mechanism evaluation, as well as systems-level engineering simulations. In this work experimental data from rapid compression machines (RCM) and shock tubes (ST) are compared through normalizing features of the correlation, and the performance of a detailed kinetic mechanism is evaluated based on the functional behavior of the {alpha}, {beta}, {gamma} and {lambda} parameters. Six hundred and sixty-one (661) data points have been used to fit the 37 constants of the expression where the experimental conditions cover {phi}=0.2-2.0, p=1-60atm, {chi}{sub O{sub 2}} and T=650-2000 K. Data normalized through the correlation indicate a standard deviation of {+-}4%. Departures from the correlation can be attributed to an incomplete description of the functional dependencies, some inconsistencies with regard to diluent composition, experimental uncertainties, and facility-influenced phenomena. The experimental points have also been simulated using the LLNL detailed iso-octane mechanism, where the computed ignition delay times have been fit to the new correlation. Agreement and differences between the correlated experimental and simulation {alpha}, {beta}, {gamma} and {lambda} functions are highlighted, where it is noted that there is a substantial discrepancy concerning the increased low temperature chemistry at high pressure. Implications for future engine design are discussed. (author)

33 ADVANCED PROPULSION SYSTEMS↗

Isobutane ignition delay time measurements at high pressure and detailed chemical kinetic simulations

Rapid compression machine and shock-tube ignition experiments were performed for real fuel/air isobutane mixtures at equivalence ratios of 0.3, 0.5, 1, and 2. The wide range of experimental conditions included temperatures from 590 to 1567 K at pressures of approximately 1, 10, 20, and 30 atm. These data represent the most comprehensive set of experiments currently available for isobutane oxidation and further accentuate the complementary attributes of the two techniques toward high-pressure oxidation experiments over a wide range of temperatures. The experimental results were used to validate a detailed chemical kinetic model composed of 1328 reactions involving 230 species. This mechanism has been successfully used to simulate previously published ignition delay times as well. A thorough sensitivity analysis was performed to gain further insight to the chemical processes occurring at various conditions. Additionally, useful ignition delay time correlations were developed for temperatures greater than 1025 K. Comparisons are also made with available isobutane data from the literature, as well as with 100% n-butane and 50-50% n-butane-isobutane mixtures in air that were presented by the authors in recent studies. In general, the kinetic model shows excellent agreement with the data over the wide range of conditions of the present study. (author)

2-METHYLPROPANE↗

{beta}-delayed neutron emission measurements around the third r-process abundance peak

This contribution summarizes an experiment performed at GSI (Germany) in the neutron-rich region beyond N=126. The aim of this measurement is to provide the nuclear physics input of relevance for r-process model calculations, aiming at a better understanding of the third r-process abundance peak. Many exotic nuclei were measured around {sup 211}Hg and {sup 215}Tl. Final ion identification diagrams are given in this contribution. For most of them, we expect to derive halflives and and {beta}-delayed neutron emission probabilities. The detectors used in this experiment were the Silicon IMplantation and Beta Absorber (SIMBA) detector, based on an array of highly segmented silicon detectors, and the BEta deLayEd Neutron (BELEN) detector, which consisted of 30 3He counters embedded in a polyethylene matrix.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Attosecond time delay in atomic photoionization: Angular-dependent transition from dipole to quadrupole and spin-flip dynamics

The angular distribution of attosecond Wigner time delay has been investigated including both quadrupole and relativistic effects using the relativistic-random-phase approximation that is based on the Dirac equation and includes significant aspects of many-body correlations. Here the results show a dramatic evolution of the time delay from (essentially nonrelativistic) dipole to quadrupole and spin-flip dynamics as a function of angle, thereby providing a venue for studying these interactions at the attosecond level.

74 ATOMIC AND MOLECULAR PHYSICS↗

Distributed Delay Differential Equation Representations of Cyclic Differential Equations

Compartmental ordinary differential equation (ODE) models are used extensively in mathematical biology. When transit between compartments occurs at a constant rate, the well-known linear chain trick can be used to show that the ODE model is equivalent to an Erlang distributed delay differential equation (DDE). Here, we demonstrate that compartmental models with nonlinear transit rates and possibly delayed arguments are also equivalent to a scalar distributed DDE. To illustrate the utility of these equivalences, we calculate the equilibria of the scalar DDE, and compute the characteristic function---without calculating a determinant. Further, we derive the equivalent scalar DDE for two examples of models in mathematical biology and use the DDE formulation to identify physiological processes that were otherwise hidden by the compartmental structure of the ODE model.

97 MATHEMATICS AND COMPUTING↗

Dynamics modeling of molten salt reactor with reduced and expanded representations of delayed neutron precursors

Molten salt reactors (MSRs) present unique challenges in dynamic behavior due to the mobility of their fuel. In these reactors, delayed neutron precursors (DNPs) drift with the fuel circulation through the primary loop. As a result, a fraction of DNPs decays outside the core, effectively reducing the available delayed neutron population for reactivity control. Consequently, precise modeling of the distribution and behavior of DNPs is critical for accurate reactor dynamics simulations. In this study, the System Dynamics Analysis Tool (SDAT) was used to simulate a thermal-spectrum MSR under steady-state conditions and following transients. The effects of using reduced and expanded representations of DNPs with fewer or more groups than the conventional 6-group model were investigated. Their impact on the simulated distribution of precursors in the primary loop, reactivity loss value, and reactor response to transients was analyzed. Simulation results showed that reduced models lead to the loss of the actual DNPs distribution data, resulting in less accurate estimates of reactivity loss. Reactor power predictions using these reduced models showed significant deviations compared to those using the conventional 6-group model in transient simulations. Expanded models offered a more accurate representation of the distribution of DNPs and reactivity loss estimates. Reactor power predictions using expanded models showed minimal deviation from the conventional 6-group model during the simulated transients.

analysis↗

Ignition delay time and speciation of dibutyl ether at high pressures

Dibutyl ether (DBE) is a promising biofuel due to its high cetane number (~ 100) and high volumetric energy density (31.6 MJ/L). It could either be used directly in compression ignition engines or blended with other conventional or renewable fuels. Oxidation and pyrolysis kinetics of DBE are not well known, particularly at high pressures. In this work, we have experimentally investigated the chemical kinetics of DBE in three domains: (a) ignition delay time measurements in a rapid compression machine over T = 550–650 K, P = 10, 20, 40 bar, φ = 0.5, 1; (b) ignition delay time measurements in a shock tube over T = 900–1300 K, P = 20, 40 bar, φ = 0.5, 1; (c) laser-based carbon monoxide speciation measurements in a shock tube during DBE pyrolysis and oxidation over T = 1100–1400 K, P = 20 bar. Pressure time-histories measured in RCM experiments exhibited unique 3-stage and 4-stage ignition behavior predominantly at fuel-lean conditions. Experimental data were compared with the predictions of two recent chemical kinetic models of DBE. Sensitivity analyses were carried out to identify key reactions which may have caused the discrepancy between experiments and simulations. We found that the rate of decomposition of DBE may need to be revisited to improve the oxidative and pyrolytic predictions of DBE kinetic model.

09 BIOMASS FUELS↗