Search NASA⌕ Search

SEARCH · Search NASA

Results for “depth profiles”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

Embedded Ge nanocrystals in SiO{sub 2} synthesized by ion implantation

200 nm thick SiO{sub 2} layers grown on Si substrates were implanted with 150 keV Ge ions at three different fluences. As-implanted samples were characterized with time-of-flight secondary ion mass spectrometry and Rutherford backscattering spectrometry to obtain depth profiles and concentration of Ge ions. As-implanted samples were annealed at 950 °C for 30 min. Crystalline quality of pristine, as-implanted, and annealed samples was investigated using Raman scattering measurements and the results were compared. Crystalline structure of as-implanted and annealed samples of embedded Ge into SiO{sub 2} matrix was studied using x-ray diffraction. No secondary phase or alloy formation of Ge was detected with x-ray diffraction or Raman measurements. Scanning transmission electron microscope measurements were done to get the nanocrystal size and localized information. The results confirmed that fluence dependent Ge nanocrystals of different sizes are formed in the annealed samples. It is also observed that Ge is slowly diffusing deeper into the substrate with annealing.

36 MATERIALS SCIENCE↗

SRF niobium characterization using SIMS and FIB-TEM

Our understanding of superconducting radio frequency (SRF) accelerator cavities has been improved by elemental analysis at high depth resolution and by high magnification microscopy. This paper summarizes the technique development and the results obtained on poly-crystalline, large grain, and single crystal SRF niobium. Focused ion beam made possible sample preparation using transmission electron microscopy and the images obtained showed a very uniform oxide layer for all samples analyzed. Secondary ion mass spectrometry indicated the presence of a high concentration of hydrogen and the hydrogen content exhibited a relationship with improvement in performance. Depth profiles of carbon, nitrogen, and oxygen did not show major differences with heat treatment. Niobium oxide less than 10 nm thick was shown to be an effective hydrogen barrier. Niobium with titanium contamination showed unexpected performance improvement.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nanoscale calibration of n-type ZnO staircase structures by scanning capacitance microscopy

Cross-sectional scanning capacitance microscopy (SCM) was performed on n-type ZnO multi-layer structures homoepitaxially grown by molecular beam epitaxy method. Highly contrasted SCM signals were obtained between the ZnO layers with different Ga densities. Through comparison with dopant depth profiles from secondary ion mass spectroscopy measurement, it is demonstrated that SCM is able to distinguish carrier concentrations at all levels of the samples (from 2 × 10{sup 17 }cm{sup −3} to 3 × 10{sup 20 }cm{sup −3}). The good agreement of the results from the two techniques indicates that SCM can be a useful tool for two dimensional carrier profiling at nanoscale for ZnO nanostructure development. As an example, residual carrier concentration inside the non-intentionally doped buffer layer was estimated to be around 2 × 10{sup 16 }cm{sup −3} through calibration analysis.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A flexible setup for angle-resolved X-ray fluorescence spectrometry with laboratory sources

X-ray fluorescence (XRF) analysis is one of the standard tools for the analysis of stratified materials and is widely applied for the investigation of electronics and coatings. The composition and thickness of the layers can be determined quantitatively and non-destructively. Recent work showed that these capabilities can be extended towards retrieving stratigraphic information like concentration depth profiles using angle-resolved XRF (ARXRF). This paper introduces an experimental sample chamber which was developed as a multi-purpose tool enabling different measurement geometries suited for transmission measurements, conventional XRF, ARXRF, etc. The chamber was specifically designed for attaching all kinds of laboratory X-ray sources for the soft and hard X-ray ranges as well as various detection systems. In detail, a setup for ARXRF using an X-ray tube with a polycapillary X-ray lens as source is presented. For such a type of setup, both the spectral and lateral characterizations of the radiation field are crucial for quantitative ARXRF measurements. The characterization is validated with the help of a stratified validation sample.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

The physical mechanism on the threshold voltage temperature stability improvement for GaN HEMTs with pre-fluorination argon treatment

In this paper, a normally-off AlGaN/GaN MIS-HEMT with improved threshold voltage (V{sub TH}) thermal stability is reported with investigations on its physical mechanism. The normally-off operation of the device is achieved from novel short argon plasma treatment (APT) prior to the fluorine plasma treatment (FPT) on Al{sub 2}O{sub 3} gate dielectrics. For the MIS-HEMT with FPT only, its V{sub TH} drops from 4.2 V at room temperature to 0.5 V at 200 °C. Alternatively, for the device with APT-then-FPT process, its V{sub TH} can retain at 2.5 V at 200 °C due to the increased amount of deep-level traps that do not emit electrons at 200 °C. This thermally stable V{sub TH} makes this device suitable for high power applications. The depth profile of the F atoms in Al{sub 2}O{sub 3}, measured by the secondary ion mass spectroscopy, reveals a significant increase in the F concentration when APT is conducted prior to FPT. The X-ray photoelectron spectroscopy (XPS) analysis on the plasma-treated Al{sub 2}O{sub 3} surfaces observes higher composition of Al-F bonds if APT was applied before FPT. The enhanced breaking of Al-O bonds due to Ar bombardment assisted in the increased incorporation of F radicals at the surface during the subsequent FPT process. The Schrödinger equation of Al{sub 2}O{sub x}F{sub y} cells, with the same Al-F compositions as obtained from XPS, was solved by Gaussian 09 molecular simulations to extract electron state distribution as a function of energy. The simulation results show creation of the deeper trap states in the Al{sub 2}O{sub 3} bandgap when APT is used before FPT. Finally, the trap distribution extracted from the simulations is verified by the gate-stress experimental characterization to confirm the physical mechanism described.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Interface structure in nanoscale multilayers near continuous-to-discontinuous regime

Interfacial atomic diffusion, reaction, and formation of microstructure in nanoscale level are investigated in W/B{sub 4}C multilayer (ML) system as functions of thickness in ultrathin limit. Hard x-ray reflectivity (XRR) and x-ray diffuse scattering in conjunction with x-ray absorption near edge spectroscopy (XANES) in soft x-ray and hard x-ray regimes and depth profiling x-ray photoelectron spectroscopy (XPS) have been used to precisely evaluate detailed interfacial structure by systematically varying the individual layer thickness from continuous-to-discontinuous regime. It is observed that the interfacial morphology undergoes an unexpected significant modification as the layer thickness varies from continuous-to-discontinuous regime. The interfacial atomic diffusion increases, the physical density of W layer decreases and that of B{sub 4}C layer increases, and further more interestingly the in-plane correlation length decreases substantially as the layer thickness varies from continuous-to-discontinuous regime. This is corroborated using combined XRR and x-ray diffused scattering analysis. XANES and XPS results show formation of more and more tungsten compounds at the interfaces as the layer thickness decreases below the percolation threshold due to increase in the contact area between the elements. The formation of compound enhances to minimize certain degree of disorder at the interfaces in the discontinuous region that enables to maintain the periodic structure in ML. The degree of interfacial atomic diffusion, interlayer interaction, and microstructure is correlated as a function of layer thickness during early stage of film growth.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effect of top gate potential on bias-stress for dual gate amorphous indium-gallium-zinc-oxide thin film transistor

We report the abnormal behavior of the threshold voltage (V{sub TH}) shift under positive bias Temperature stress (PBTS) and negative bias temperature stress (NBTS) at top/bottom gate in dual gate amorphous indium-gallium-zinc-oxide (a-IGZO) thin-film transistors (TFTs). It is found that the PBTS at top gate shows negative transfer shift and NBTS shows positive transfer shift for both top and bottom gate sweep. The shift of bottom/top gate sweep is dominated by top gate bias (V{sub TG}), while bottom gate bias (V{sub BG}) is less effect than V{sub TG}. The X-ray photoelectron spectroscopy (XPS) depth profile provides the evidence of In metal diffusion to the top SiO{sub 2}/a-IGZO and also the existence of large amount of In{sup +} under positive top gate bias around top interfaces, thus negative transfer shift is observed. On the other hand, the formation of OH{sup −} at top interfaces under the stress of negative top gate bias shows negative transfer shift. The domination of V{sub TG} both on bottom/top gate sweep after PBTS/NBTS is obviously occurred due to thin active layer.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Suppression effect of silicon (Si) on Er{sup 3+} 1.54μm excitation in ZnO thin films

We have investigated the photoluminescence (PL) characteristics of ZnO:Er thin films on Si (100) single crystal and SiO{sub 2}-on-silicon (SiO{sub 2}) substrates, synthesized by radio frequency magnetron sputtering. Rutherford backscattering/channeling spectrometry (RBS), X-ray diffraction (XRD) and atomic force microscope (AFM) were used to analyze the properties of thin films. The diffusion depth profiles of Si were determined by second ion mass spectrometry (SIMS). Infrared spectra were obtained from the spectrometer and related instruments. Compared with the results at room temperature (RT), PL (1.54μm) intensity increased when samples were annealed at 250°C and decreased when at 550°C. A new peak at 1.15μm from silicon (Si) appeared in 550°C samples. The Si dopants in ZnO film, either through the diffusion of Si from the substrate or ambient, directly absorbed the energy of pumping light and resulted in the suppression of Er{sup 3+} 1.54μm excitation. Furthermore, the energy transmission efficiency between Si and Er{sup 3+} was very low when compared with silicon nanocrystal (Si-NC). Both made the PL (1.54μm) intensity decrease. All the data in experiments proved the negative effects of Si dopants on PL at 1.54μm. And further research is going on.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Evidence for room-temperature in-diffusion of nickel into silicon

Interstitial nickel in crystalline Si is shown to be a fast diffuser at room temperature. In this study, Ni is incorporated in Si by wet chemical etching in nickel-contaminated alkaline solutions. Nickel in-diffusion is observed by means of detecting the electrically active NiVO defect, which is formed due to Ni capture to the vacancy–oxygen complex in electron-irradiated Si. The depth profiles of the NiVO concentration measured by the deep-level transient spectroscopy technique extend to ∼15 μm in the samples doped with Ni at 35 °C for 30 min. This allows us to get a lower estimate for the nickel diffusivity at this temperature as 10{sup −9} cm{sup 2}/s. The activation energy for electron emission from the NiVO level and the apparent capture cross section are equal to 371 meV and 3 × 10{sup −15} cm{sup 2}, respectively. The NiVO complex dissociates at 300 °C reestablishing the initial concentration of the VO centers.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Correlation of cation deficiency and nanostructure to decreased magnetism in a ferroelectric BiMnO3 film

The pseudoperovskite BiMnO 3 is a multiferroic candidate, but missing details of materials properties are impeding potential technological applications. BiMnO 3 has a centrosymmetric structure that precludes ferroelectricity in bulk stoichiometric samples, while some films have reported ferroelectricity along with a decreased magnetic response. This puzzle motivated a study of one such film, deposited by pulsed laser deposition onto SrTiO 3 . Probes utilized include microscopy, diffraction, reflectometry, and X-ray absorption. These experiments in the context of the existing literature show an anomalous unit-cell volume and a (magnetic) depth profile. Then, the resulting inhomogeneous deficiency of Bi and Mn metals may stabilize a multiphase system that explains the decreased magnetism. Film nanostructure and strain effects are also considered.

36 MATERIALS SCIENCE↗

Visualization of large-scale charged domain Walls in hexagonal manganites

A ferroelectric charged domain wall (CDW) carries bound charges, originating from the variation of the normal components of polarization across the domain boundary, leading to a possible two-dimensional conductive interface in insulating materials. The ferroelectric CDW can be precisely created, erased, and manipulated, therefore offering an intriguing pathway toward the design of nano-devices. However, due to rather large energy costs, the size of the CDW is usually on the nanoscale. Here, taking flux-grown ferroelectric hexagonal manganites (h-RMnO 3 ) as an example, we creatively adopted an accessible inclined polishing process to reveal the domain evolution of stripe, loop, and vortex domain patterns by depth profiling. Interestingly, we observed an unexpected large-scale straight CDW in as-grown LuMnO 3 with length up to a millimeter size, which may result from the “polar catastrophe” during the flux growth. The large-scale CDW has a residual influence on the formation of the loop domain when the crystal anneals below the ferroelectric transition temperature, but completely disappears as the topological vortices emerge. The observed large-scale CDWs make h-RMnO 3 a potential candidate for advanced electronic devices, leading to a panoply of desired properties.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Understanding copper diffusion in CuInSe 2 with first-principles based atomistic and continuum models

We investigate the diffusion of copper in CuInSe 2 using thermodynamic and kinetic models based on density functional theory calculations, attempting to reconcile large differences in reported experimental diffusivities. We find that observations of rapid chemical diffusion can be explained by large thermodynamic factors, which we calculate using a compositionally constrained model of intrinsic point defect formation. We further characterize how copper diffusion coefficients depend on material synthesis conditions and exhibit their variation across the CuInSe 2 secondary phase diagram. In doing so, we identify stable off-stoichiometries that are dominated by either vacancy- or interstitial-mediated diffusion mechanisms. These results are employed in the development of a continuum reaction–diffusion model, which we use to simulate experimental depth profiles.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Electrical Analysis of Pulsed Laser Annealed Poly-Si: Ga/SiOx Passivating Contacts

In this contribution, we examine Ga hyper-doped poly-Si/SiOx contacts realized by pulsed laser melting (PLM). Here, we use Ga as a novel p-type dopant and B as a conventional dopant to induce non-equilibrium doping using an excimer laser. We perform simulations to visualize the maximum melt depth profiles within the poly-Si, with a goal of distributing dopants close to the tunneling oxide, but at the same time preserving the passivation. Hall measurements show that sheet resistance for B is lower than Ga due to its higher solid solubility limit in Si. After comparing the Hall active dopant concentration with the chemical concentration obtained by SIMS measurement, we show nearly 100% activation B activation reaching 10^21 cm-3, while only ~20% activation for Ga. Nevertheless, we achieve active doping concentrations of Ga in poly-Si six times higher than its solid solubility limit in Si (~10^19 cm-3). We compare our Hall mobilities with values in the literature for c-Si and show that B mobilities in laser-treated poly-Si are close to that of the literature value for B, while Ga mobilities are lower, possibly due to additional scattering channels within grain boundaries and deformed lattice. We also compare our results on PLM samples with conventional furnace annealed samples, and we show much higher percent activation and mobilities. Previously, we showed a low contact resistivity of 35.5 +/- 2.4 m..omega..cm2. Here, we further confirm this result by scanning spreading resistance microscopy and Kelvin force nanoprobe microscopy. We demonstrate that our poly-Si: Ga/nCz contact exhibits large drift and diffusion currents under normal cell operating voltage, which widens the laser processing window for a good metal/poly-Si/c-Si contact.

high-efficiency solar cells↗

Diffusion of Sn donors in β-Ga 2 O 3

Diffusion of the n-type dopant Sn in β-Ga 2 O 3 is studied using secondary-ion mass spectrometry combined with hybrid functional calculations. The diffusion of Sn from a Sn-doped bulk substrate with surface orientation (001) into an epitaxial layer is observed after heat treatments in the temperature range of 1050–1250 °C. Calculated formation energies of Sn-related and intrinsic defects show that the migration of Sn is mediated by Ga vacancies ( V Ga ) through the formation and dissociation of intermittent mobile V Ga Sn Ga complexes. The evolution of the Sn concentration vs depth profiles after heat treatments can be well described by a reaction–diffusion model. Using model parameters guided by the hybrid functional calculations, we extract a V Ga Sn Ga complex migration barrier of 3.0 ± 0.4 eV with a diffusion coefficient of 2 × 10 –1 cm 2 /s. The extracted migration barrier is consistent with our theoretical predictions using the nudged elastic band method, which shows migration barriers of 3.42, 3.15, and 3.37 eV for the [100], [010], and [001] directions, respectively.

36 MATERIALS SCIENCE↗

Ferroelectric Al1 − xBxN thin films integrated on Si

Ferroelectric Al0.93B0.07N thin films are prepared (100) Si substrates. The necessary c-axis out-of-plane orientation to observe macroscopic ferroelectric switching was achieved by implementing an initial Ar/N2 plasma treatment, followed by a thin layer of AlN to initiate the desired texture and a 150 nm W layer. The plasma treatment facilitates crystallinity enhancement of the AlN template layer, allowing for subsequent growth of highly oriented W and Al0.93B0.07N layers. The W layer exhibits random in-plane orientation and exclusive (110) out-of-plane orientation with a rocking curve width of 1.4°. When grown on these W surfaces, 175 nm thick Al0.93B0.07N films exhibit random in-plane orientation and exclusive (001) texture with rocking curve full-width-half-max values of 1.6° and RMS roughness values less than 1 nm. Polarization hysteresis measurements show robust hysteresis with coercive field values of 5.4 MV/cm and remanent polarization values of 136 μC/cm2. XPS depth profile analysis suggests that the plasma treatment converts the existing native oxide to a nitrogen rich oxynitride with approximate composition Si3O0.5N3.67. Cross-sectional TEM reveals that the oxynitride interlayer is amorphous and ∼3.4 nm thick, more than double the native oxide thickness measured by multiwavelength ellipsometry, implying that (oxy)nitride growth continues after conversion of the native oxide. This new family of ferroelectric wurtzites is interesting from an integration perspective given their chemical compatibility with mainstream semiconductors. Developing synthesis routes that promote needed texture while preserving compatible processing windows is an important step toward practical integration.

Physics↗

Comparison of Mg-based liquid metal ion sources for scalable focused-ion-implantation doping of GaN

We compare the suitability of various magnesium-based liquid metal alloy ion sources (LMAISs) for scalable focused-ion-beam (FIB) implantation doping of GaN. We consider GaMg, MgSO 4 $\bullet$7H 2 O, MgZn, AlMg, and AuMgSi alloys. Although issues of oxidation (GaMg), decomposition (MgSO 4 $\bullet$7H 2 O), and excessive vapor pressure (MgZn and AlMg) were encountered, the AuMgSi alloy LMAIS operating in a Wien-filtered FIB column emits all Mg isotopes in singly and doubly charged ionization states. We discuss the operating conditions to achieve <20 nm spot size Mg FIB implantation and present Mg depth profile data from time-of-flight secondary ion mass spectrometry. We also provide insight into implantation damage and recovery based on cathodoluminescence spectroscopy before and after rapid thermal processing. Prospects for incorporating the Mg LMAIS into high-power electronic device fabrication are also discussed.

36 MATERIALS SCIENCE↗

Morphology of Mixed Primary and Secondary Organic Particles and the Adsorption of Spectator Organic Gases during Aerosol Formation

Traditional semi-empirical secondary organic aerosol (SOA) models assume that SOA mixes well with primary organic aerosols (POA), which significantly enhances the modeled SOA yields. These models further assume that the organic compounds in the gas phase do no condense on SOA as it forms. These assumptions were challenged through a detailed experimental investigation of the compositions and morphologies of SOA particles formed during ozonolysis of α-pinene in the presence of dioctyl phthalate (DOP) particles and DOP gas phase component using a single particle mass spectrometer. Ultraviolet (UV) laser depth-profiling experiments were used to characterize different types of mixed SOA/DOP particles: those formed by condensation of the oxidized α-pinene products on size-selected DOP particles and by condensation of DOP on size-selected α-pinene SOA particles. The results of these measurements conclusively show that the hydrophilic SOA and hydrophobic DOP do not mix, but instead form distinct phases. An examination of homogeneously-nucleated SOA particles formed in the presence of DOP shows them to be encapsulated by a thin DOP layer. Thus SOA can adsorb gas-phase DOP even though it has an extremely low vapor pressure (1.3×10-7 Torr), which has significant implications for SOA formation and fate in the atmosphere, where numerous organic compounds with various volatilities are present.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Formation of bubbles and blisters in hydrogen ion implanted polycrystalline tungsten

Tungsten (W) has been regarded as one of the most promising plasma facing materials (PFMs) in fusion reactors. The formation of bubbles and blisters during hydrogen (H) irradiation will affect the properties of W. The dependence of implantation conditions,such as fluence and energy, is one of the many great interests. In this work, polycrystalline tungsten samples were separated into two groups for study. The thick samples were implanted by 18 keV H3+ ions to fluences of 1E18, 1E19 and 1E20 H+/cm2, respectively. Another thick sample was also implanted by 80 keV H2+ ions to a fluence of 2E17 H+/cm2 for comparison. Moreover, the thin samples were implanted by 18 keV H3+ ions to fluences of 9.38E16, 1.88E17 and 5.63E17 H+/cm2, respectively. Focused ion beam (FIB) combined with scanning electron microscopy (SEM) and transmission electron microscopy (TEM) were used for micro-structure analysis, while time-of-flight ion mass spectrometry (ToF-SIMS) was used to characterize the H depth profile. It is indicated that bubbles and blisters could form successively with increasing H+ fluence. H bubbles are formed at a fluence of ~ 5.63E17 H+/cm2, and H blisters are formed at ~ 1E19 H+/cm2 for 18 keV H3+ implantation. On the other hand, 80 keV H2+ ions can create more trapping sites in a shallow projected range, and thus enhancing the blisters formation with a relatively lower fluence of 2E17 H+/cm2. The crack-like microstructures beneath the blisters are also observed and prefer to form on the deep side of the implanted range.

Zhang, Jiandong↗