Search NASA⌕ Search

SEARCH · Search NASA

Results for “dislocation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

Evaluation of stacking faults and associated partial dislocations in AlSb/GaAs (001) interface by aberration-corrected high-resolution transmission electron microscopy

The stacking faults (SFs) in an AlSb/GaAs (001) interface were investigated using a 300 kV spherical aberration-corrected high-resolution transmission electron microscope (HRTEM). The structure and strain distribution of the single and intersecting (V-shaped) SFs associated with partial dislocations (PDs) were characterized by the [110] HRTEM images and geometric phase analysis, respectively. In the biaxial strain maps ε{sub xx} and ε{sub yy}, a SF can be divided into several sections under different strain states (positive or negative strain values). Furthermore, the strain state for the same section of a SF is in contrast to each other in ε{sub xx} and ε{sub yy} strain maps. The modification in the strain states was attributed to the variation in the local atomic displacements for the SF in the AlSb film on the GaAs substrate recorded in the lattice image. Finally, the single SF was found to be bounded by two 30° PDs. A pair of 30° PDs near the heteroepitaxial interface reacted to form a Lomer-Cottrell sessile dislocation located at the vertices of V-shaped SFs with opposite screw components. The roles of misfit dislocations, such as the PDs, in strain relaxation were also discussed.

36 MATERIALS SCIENCE↗

Change in equilibrium position of misfit dislocations at the GaN/sapphire interface by Si-ion implantation into sapphire—I. Microstructural characterization

Much research has been done to reduce dislocation densities for the growth of GaN on sapphire, but has paid little attention to the elastic behavior at the GaN/sapphire interface. In this study, we have examined effects of the addition of Si to a sapphire substrate on its elastic property and on the growth of GaN deposit. Si atoms are added to a c-plane sapphire substrate by ion implantation. The ion implantation results in scratches on the surface, and concomitantly, inhomogeneous distribution of Si. The scratch regions contain a higher concentration of Si than other regions of the sapphire substrate surface, high-temperature GaN being poorly grown there. However, high-temperature GaN is normally grown in the other regions. The GaN overlayer in the normally-grown regions is observed to have a lower TD density than the deposit on the bare sapphire substrate (with no Si accommodated). As compared with the film on an untreated, bare sapphire, the cathodoluminescence defect density decreases by 60 % for the GaN layer normally deposited on the Si-ion implanted sapphire. As confirmed by a strain mapping technique by transmission electron microscopy (geometric phase analysis), the addition of Si in the normally deposited regions forms a surface layer in the sapphire elastically more compliant than the GaN overlayer. The results suggest that the layer can largely absorb the misfit strain at the interface, which produces the overlayer with a lower defect density. Our results highlight a direct correlation between threading-dislocation density in GaN deposits and the elastic behavior at the GaN/sapphire interface, opening up a new pathway to reduce threading-dislocation density in GaN deposits.

36 MATERIALS SCIENCE↗

A comprehensive study of the impact of dislocation loops on leakage currents in Si shallow junction devices

In this work, the electrical properties of dislocation loops and their role in the generation of leakage currents in p-n or Schottky junctions were investigated both experimentally and through simulations. Deep Level Transient Spectroscopy (DLTS) reveals that the implantation of silicon with 2 × 10{sup 15} Ge cm{sup −2} and annealing between 1000 °C and 1100 °C introduced two broad electron levels E{sub C} − 0.38 eV and E{sub C} − 0.29 eV in n-type samples and a single broad hole trap E{sub V} + 0.25 eV in the p-type samples. These trap levels are related to the extended defects (dislocation loops) formed during annealing. Dislocation loops are responsible for the significant increase of leakage currents which are attributed to the same energy levels. The comparison between structural defect parameters and electrical defect concentrations indicates that atoms located on the loop perimeter are the likely sources of the measured DLTS signals. The combined use of defect models and recently developed DLTS simulation allows reducing the number of assumptions and fitting parameters needed for the simulation of leakage currents, therefore improving their predictability. It is found that simulations based on the coupled-defect-levels model reproduce well the measured leakage current values and their field dependence behaviour, indicating that leakage currents can be successfully simulated on the exclusive basis of the experimentally observed energy levels.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Screw dislocation-induced growth spirals as emissive exciton localization centers in Al-rich AlGaN/AlN quantum wells

Screw dislocations in Al-rich AlGaN/AlN quantum wells cause growth spirals with an enhanced Ga incorporation, which create potential minima. Although screw dislocations and their surrounding potential minima suggest non-radiative recombination processes within growth spirals, in reality, screw dislocations are not major non-radiative sinks for carriers. Consequently, carriers localized within growth spirals recombine radiatively without being captured by non-radiative recombination centers, resulting in intense emissions from growth spirals.

36 MATERIALS SCIENCE↗

Mapping Strain-rate Dependent Dislocation-Defect Interactions by Atomistic Simulations

Probing the mechanisms of defect-defect interactions at strain rates lower than 106 s-1 is an unresolved challenge to date to molecular dynamics (MD) techniques. Here we propose a novel atomistic approach based on transition state theory and the concept of a strain-dependent effective activation barrier that is capable of simulating the kinetics of dislocation-defect interactions at virtually any strain rate, exemplified within 10-7 to 107 s-1. We apply this approach to the problem of an edge dislocation colliding with a cluster of self-interstitial atoms (SIA) under shear deformation. Using an activation-relaxation algorithm (1), we uncover a unique strain-rate dependent trigger mechanism that allows the SIA cluster to be absorbed during the process leading to dislocation climb. Guided by this finding, we determine the activation barrier of the trigger mechanism as a function of shear strain, and use that in a coarse-graining rate equation formulation for constructing a mechanism map in the phase space of strain-rate and temperature. Our predictions of a crossover from a defect recovery at the low strain rate regime to defect absorption behavior in the high strain-rate regime are validated against our own independent, direct MD simulations at 105 to 107 s-1. Implications of the present approach for probing molecular-level mechanisms in strain-rate regimes previously considered inaccessible to atomistic simulations are discussed.

activation mecanism↗

Enhanced void swelling in NiCoFeCrPd high-entropy alloy by indentation-induced dislocations

The role of dislocations on ion irradiation-induced void formation is studied in a high-entropy alloy (HEA) NiCoFeCrPd. Despite previous observations that show high-entropy alloys are swelling resistant due to a high defect recombination rate, the swelling is enhanced with increasing density of pre-existing dislocations at low strain levels that shortened transient duration before the onset of void swelling. Under certain irradiation conditions, a high density of dislocations may carry the material closer to the sink-dominated regime. Finally, compared to another HEA NiCoFeCrMn, NiCoFeCrPd has a smaller loop size and higher loop density due to the stronger lattice distortion.

36 MATERIALS SCIENCE↗

Effect of helium bubbles on the mobility of edge dislocations in copper

Abstract Helium bubbles can form in materials upon exposure to irradiation. It is well known that the presence of helium bubbles can cause changes in the mechanical behavior of materials. To improve the lifetime of nuclear components, it is important to understand deformation mechanisms in helium-containing materials. In this work, we investigate the interactions between edge dislocations and helium bubbles in copper using molecular dynamics (MD) simulations. We focus on the effect of helium bubble pressure (equivalently, the helium-to-vacancy ratio) on the obstacle strength of helium bubbles and their interaction with dislocations. Our simulations predict significant differences in the interaction mechanisms as a function of helium bubble pressure. Specifically, bubbles with high internal pressure are found to exhibit weaker obstacle strength as compared to low-pressure bubbles of the same size due to the formation of super-jogs in the dislocation. Activation energies and rate constants extracted from the MD data confirm this transition in mechanism and enable upscaling of these phenomena to higher length-scale models.

36 MATERIALS SCIENCE↗

X-ray diffraction of epitaxial films with arbitrarily correlated dislocations: Monte Carlo calculation and experiment

We present a Monte Carlo technique to calculate the x-ray diffraction profiles from films with arbitrarily correlated dislocation distributions. Both spatial integration and the integration over several dislocation ensembles are performed simultaneously. We explicitly consider the coexistence of misfit and threading dislocation ensembles with arbitrary correlations. Using these techniques, we are able to quantitatively reproduce the experimental lineshapes for both thin (less than 100 nm) and thick (more than 1000 nm) GaN epitaxial films on SiC. Our calculations explain the ubiquitous lineshape observed for thin, highly mismatched films, with a central coherent peak accompanied by exponentially decaying diffuse scattering.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Comment on 'Interaction of a surface wave with a dislocation'

These are some remarks to the paper of Maurel et al. [Phys. Rev. B 75, 224112 (2007)], which is devoted to deep theoretical analysis of the interaction of acoustic waves (phonons) with dislocations. Taking account of the secondary elastic waves emitted by the vibrating dislocations is an important development of this problem. As a result, the arising dynamic deformation fields are calculated more accurately than before and compared with our experimental results obtained a few years ago for LiNbO{sub 3} crystals [Phys. Rev. Lett. 91, 115506 (2003)]. Our objection is related to the usage in the simulations [Phys. Rev. B 75, 224112 (2007)] a very high magnitude (not justified) of the dislocation drag coefficient, which makes problematic a quantitative comparison with our experimental results as well as a part of the conclusions drawn on this basis.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

X-ray diffraction peaks from partially ordered misfit dislocations

We calculate the x-ray diffraction peak profiles from distributions of misfit dislocations in the whole range of their positional correlations, from completely random to periodic. Both the spatial integration and the integration over the dislocation ensemble are performed by Monte Carlo techniques. The diffraction peaks from thin relaxed films consisting of a narrow coherent and a broad diffuse component are explained. Correlation functions are calculated analytically for different types of positional correlations between dislocations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of the {alpha}-{gamma} Phase Transition on the Stability of Dislocation Loops in bcc Iron

Body-centered-cubic iron develops an elastic instability, driven by spin fluctuations, near the {alpha}-{gamma} phase transition temperature T{sub c}=912 deg. C that is associated with the dramatic reduction of the shear stiffness constant c{sup '}=(c{sub 11}-c{sub 12})/2 near T{sub c}. This reduction of c{sup '} has a profound effect on the temperature dependence of the anisotropic elastic self-energies of dislocations in iron. It also affects the relative stability of the a<100> and a/2<111> prismatic edge dislocation loops formed during irradiation. The difference between the anisotropic elastic free energies provides the fundamental explanation for the observed dominant occurrence of the a<100>, as opposed to the a/2<111>, Burgers vector configurations of prismatic dislocation loops in iron and iron-based alloys at high temperatures.

36 MATERIALS SCIENCE↗

Reversible Movement of Homogenously Nucleated Dislocations in a {beta}-Titanium Alloy

We demonstrate reversible movement of (1/2)[110](110) dislocation loops generated from nanodisturbances in a {beta}-titanium alloy. High resolution transmission electron microscope observations during an in situ tensile test found three reversible deformation mechanisms, nanodisturbances, dislocation loops and martensitic transformation, that are triggered in turn with increasing applied stress. All three mechanisms contribute to the nonlinear elasticity of the alloy. The experiments also revealed the evolution of the dislocation loops to disclination dipoles that cause severe local lattice rotations.

36 MATERIALS SCIENCE↗

Dislocation loop evolution in Kr-irradiated ThO 2

Here, the early stage of microstructural evolution of ThO 2 , under krypton irradiation at 600, 800, and 1000°C, was investigated using in situ transmission electron microscopy (TEM). Dislocation loops grew faster, whereas their number density decreased with increasing irradiation temperature. Loop density was found to decrease with ion dose. Interstitial dislocation loops, including Frank loops with Burgers vector of $\textit{a}/3\langle111\rangle$ and perfect loops with Burgers vector of $\textit{a}/2\langle110\rangle$, were determined by traditional TEM and atomic resolution–scanning TEM techniques. Atomistic and mesoscale level modeling are performed to interpret experimental observations. The migration energy barriers of defects in ThO 2 were calculated using density-functional theory. The energetics of different dislocation loop types were studied using molecular dynamics simulations. Loop density and diameter were analyzed using a kinetic rate theory model that considers stoichiometric loop evolution. This analysis reveals that loop growth is governed by the mobility of cation interstitials, whereas loop nucleation is determined by the mobility of anion defects. Lastly, a rate theory model was used to extract the diffusion coefficients of thorium interstitials, oxygen interstitials, and vacancies.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Superconductivity Localized at an Edge Dislocation

A spatially inhomogeneous superconductor is considered in the Ginzburg—Landau approximation. A spatial inhomogeneity (edge dislocation) is described in terms of the local shift of the superconducting transition temperature in its neighborhood. It is assumed that shift δT{sub c}(R) is proportional to the elastic stress produced by the dislocation. It is shown that in this case, localized superconducting states exist at temperatures exceeding T{sub c} of a homogeneous superconductor. The main characteristics of such states are obtained. The same approach is used for describing pinning of Abrikosov vortices at an edge dislocation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Mesoscopic variance of dislocation displacements in semiconductor crystals

It is shown that a large variance of dislocation displacements found experimentally and the delay in its relaxation to a steady value in semiconductor materials can be explained by the stochastic nature of the dislocation-kink formation. This stochastic nature results in the development of dislocation-line roughness described by the scaling relations, including the mesoscopic time and space scales.

36 MATERIALS SCIENCE↗

Influence of dislocations on the process of pore formation in n-InP (111) single crystals

Using scanning electron microscopy, the influence of dislocations on the mechanism of pore formation during electrolytic etching of single-crystal InP is shown. During studying of the nanostructure of porous layers, the features of mechanisms of pore formation in the n-InP samples are established. It is shown that they are caused by outcrop of dislocations on the (111) surface and pore growth both along the surface and perpendicularly to it. The dislocation density in the places of an increased impurity concentration is calculated.

36 MATERIALS SCIENCE↗

Electron levels and luminescence of dislocation networks formed by the hydrophilic bonding of silicon wafers

Local energy levels produced by dislocations at the interface between bonded n- and p-Si wafers are studied by deep level transient spectroscopy and by a new technique for the detection of impurity luminescence, induced by the occupation of electron states upon the application of electric pulses (the pulsed trap-refilling-enhanced luminescence technique). It is established that only the shallow levels of the dislocation network, with activation energies of about 0.1 eV, are responsible for the D1 dislocation-related luminescence band in both n- and p-type samples. The occupation of deep levels has no effect on the D1-band intensity. A model of coupled neutral trapping centers for charge carriers is proposed. In this model, the difference between the energy position of the D1 band (0.8 eV) and the corresponding interlevel energy spacing (0.97 eV) is attributed to the Coulomb interaction between charge carriers trapped at the levels.

36 MATERIALS SCIENCE↗

Characterization of Stress Relaxation, Dislocations and Crystallographic Tilt Via X-ray Microdiffraction in GaN (0001) Layers Grown by Maskless Pendeo-Epitaxy

Intrinsic stresses due to lattice mismatch and high densities of threading dislocations and extrinsic stresses resulting from the mismatch in the coefficients of thermal expansion are present in almost all III-Nitride heterostructures. Stress relaxation in the GaN layers occurs in conventional and in pendeo-epitaxial films via the formation of additional misfit dislocations, domain boundaries, elastic strain and wing tilt. Polychromatic X-ray microdiffraction, high resolution monochromatic X-ray diffraction and finite element simulations have been used to determine the distribution of strain, dislocations, sub-boundaries and crystallographic wing tilt in uncoalesced and coalesced GaN layers grown by maskless pendeo-epitaxy. An important parameter was the width-to-height ratio of the etched columns of GaN from which the lateral growth of the wings occurred. The strain and tilt across the stripes increased with the width-to-height ratio. Tilt boundaries formed in the uncoalesced GaN layers at the column/wing interfaces for samples with a large ratio. Sharper tilt boundaries were observed at the interfaces formed by the coalescence of two laterally growing wings. The wings tilted upward during cooling to room temperature for both the uncoalesced and the coalesced GaN layers. It was determined that finite element simulations that account for extrinsic stress relaxation can explain the experimental results for uncoalesced GaN layers. Relaxation of both extrinsic and intrinsic stress components in the coalesced GaN layers contribute to the observed wing tilt and the formation of sub-boundaries.

36 MATERIALS SCIENCE↗