Search NASA⌕ Search

SEARCH · Search NASA

Results for “effective turbulence”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39
All sourcesNASA NTRSDOE OSTI
NASA NTRS1980

Effects of axisymmetric contractions on turbulence of various scales

Digitally acquired and processed results from an experimental investigation of grid generated turbulence of various scales through and downstream of nine matched cubic contour contractions ranging in area ratio from 2 to 36, and in length to inlet diameter ratio from 0.25 to 1.50 are reported. An additional contraction with a fifth order contour was also utilized for studying the shape effect. Thirteen homogeneous and nearly isotropic test flow conditions with a range of turbulence intensities, length scales and Reynolds numbers were generated and used to examine the sensitivity of the contractions to upstream turbulence. The extent to which the turbulence is altered by the contraction depends on the incoming turbulence scales, the total strain experienced by the fluid, as well as the contraction ratio and the strain rate. Varying the turbulence integral scale influences the transverse turbulence components more than the streamwise component. In general, the larger the turbulence scale, the lesser the reduction in the turbulence intensity of the transverse components. Best agreement with rapid distortion theory was obtained for large scale turbulence, where viscous decay over the contraction length was negligible, or when a first order correction for viscous decay was applied to the results.

Tan-Atichat, J.↗
NASA NTRS1987

Shock overshoots revisited

The ISEE 1 and 2 magnetometer and solar wind data for about 65 quasi-perpendicular bow shocks were used to investigate the role played by low-frequency turbulence in the determination of magnetic field overshoots in collisionless shock waves. Overshoots calculated from both high-resolution data and data averaged to eliminate the effects of turbulence exhibited similar behavior, but the overshoots calculated from the averaged data were generally lower by a factor of 2. Moreover, the size of overshoots calculated from the high-resolution data increased much more strongly with Mach number than that of overshoots calculated from averaged data. The difference between overshoots measured by the two sets of data was generally consistent with the presence of a component of overshoot magnitude due to low-frequecy turbulence.

Mellott, M. M.↗
NASA NTRS2010

Transition Experiments on Blunt Bodies with Isolated Roughness Elements in Hypersonic Free Flight

Smooth titanium hemispheres with isolated three-dimensional (3D) surface roughness elements were flown in the NASA Ames hypersonic ballistic range through quiescent CO2 and air environments. Global surface intensity (temperature) distributions were optically measured and thermal wakes behind individual roughness elements were analyzed to define tripping effectiveness. Real-gas Navier-Stokes calculations of model flowfields, including laminar boundary layer development in these flowfields, were conducted predict key dimensionless parameters used to correlate transition on blunt bodies in hypersonic flow. For isolated roughness elements totally immersed within the laminar boundary layer, critical roughness Reynolds numbers for flights in air were found to be higher than those measured for flights in CO2, i.e., it was easier to trip the CO2 boundary layer to turbulence. Tripping effectiveness was found to be dependent on trip location within the subsonic region of the blunt body flowfield, with effective tripping being most difficult to achieve for elements positioned closest to the stagnation point. Direct comparisons of critical roughness Reynolds numbers for 3D isolated versus 3D distributed roughness elements for flights in air showed that distributed roughness patterns were significantly more effective at tripping the blunt body laminar boundary layer to turbulence.

Reda, Daniel C.↗
NASA NTRS1994

Direct numerical simulations of turbulent non-premixed methane-air flames modeled with reduced kinetics

Turbulent non-premixed stoichiometric methane-air flames modeled with reduced kinetics have been studied using the direct numerical simulation approach. The simulations include realistic chemical kinetics, and the molecular transport is modeled with constant Lewis numbers for individual species. The effect of turbulence on the internal flame structure and extinction characteristics of methane-air flames is evaluated. Consistent with earlier DNS with simple one-step chemistry, the flame is wrinkled and in some regions extinguished by the turbulence, while the turbulence is weakened in the vicinity of the flame due to a combination of dilatation and an increase in kinematic viscosity. Unlike previous results, reignition is observed in the present simulations. Lewis number effects are important in determining the local stoichiometry of the flame. The results presented in this work are preliminary but demonstrate the feasibility of incorporating reduced kinetics for the oxidation of methane with direct numerical simulations of homogeneous turbulence to evaluate the limitations of various levels of reduction in the kinetics and to address the formation of thermal and prompt NO(x).

Card, J. M.↗
NASA NTRS1991

Compressibility effects on the growth and structure of homogeneous turbulent shear flow

Direct numerical simulations of compressible homogeneous turbulent shear flow are used to provide insight into compressibility effects on turbulence. The simulations show a reduction in the growth rate of the turbulence compared to the incompressible case. Examination of the turbulent kinetic energy budget shows that the reduced growth rate is due to an increase in the dissipation rate due to the divergence of the velocity and to the pressure-dilatation correlation which acts to transfer energy between internal energy and kinetic energy. The structure of the turbulence is also examined. Visualizations of the flowfields reveal the presence of eddy shocklets. These shock structures are important contributors to the increased dissipation of compressible turbulence. A mechanism for the generation of the shocks is suggested.

Blaisdell, G. A.↗
DOE OSTI2021

Influence of turbulence intensity on vortex pattern for a rigid cylinder with turbulence stimulation in flow induced oscillations

The effect of ambient turbulence intensity on the flow induced oscillations of rigid circular cylinders with symmetric and asymmetric local turbulence stimulation is studied. Cylinders oscillate in one degree of freedom transversely to a steady uniform flow. Two-dimensional unsteady Reynolds-Average Navier-Stokes equations with the Spalart-Allmaras turbulence model are used to solve the problem numerically. Three freestream turbulence intensity values (0.2%, 1%, 5%) are used to study the influence of turbulence intensity on vortex pattern. Simulation results are compared with experimental data measured in the Marine Renewable Energy Laboratory of the University of Michigan in the range of 30,000 ≤ Re ≤ 110,000. The amplitude ratio, lift coefficient, vortex modes, and the interactions between vortices and cylinders are observed and discussed. In conclusion, major conclusions are: (a) Vortex patterns strongly depend on the freestream ambient turbulence intensity. (b) Low turbulence intensity can generate multi-vortex patterns at high Re. (c) High turbulence intensity results in fewer separations of a shed vortex into multiple vortices inducing emergence of elongated vortex patterns.

42 ENGINEERING↗
DOE OSTI2021

Hyperdiffusion of dust particles in a turbulent tokamak plasma

In this work, the effect of plasma turbulence on the trajectories of dust particles is investigated for the first time. The dynamics of dust particles is computed using the ad hoc developed Dust Injection Simulator code, using a 3D turbulent plasma background computed with the TOKAM3X code. As a result, the evolution of the particle trajectories is governed by the ion drag force, and the shape of the trajectory is set by the Stokes number St∝a d /n 0 , with a d the dust radius and n 0 the density at the separatrix. The plasma turbulence is observed to scatter the dust particles, exhibiting a hyperdiffusive regime in all cases. The amplitude of the turbulent spread of the trajectories Δr 2 is shown to depend on the ratio Ku/St, with Ku∝u rms the Kubo number and urms the fluctuation level of the plasma flow. These results are compared with a simple analytical model, predicting Δr 2 ∝(Ku/St) 2 t 3 , or Δr 2 ∝(u rms n 0 /a d ) 2 t 3 . As the dust is heated by the plasma fluxes, thermionic emission sets the dust charge, originally negative, to slightly positive values. This results in a substantial reduction of the ion drag force through the suppression of its Coulomb scattering component. The dust grain inertia is then no longer negligible and drives the transition from a hyperdiffusive regime toward a ballistic one.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

A streamline coordinate analysis of a turbulent boundary layer subject to pressure gradients and curvature on the windward side of a bump

Direct numerical simulation (DNS) of a turbulent boundary layer over the Gaussian (Boeing) bump is performed. This boundary layer exhibits a series of adverse and favourable pressure gradients and convex and concave curvature effects before separating. These effects on turbulent boundary layers are characterised and compared with a lower-Reynolds-number flow over the same geometry. The momentum budgets are analysed in the streamline-aligned coordinate system upstream of the separation region. These momentum budgets allow the simplification of equations to facilitate an integral analysis. Integral-analysis-based approximations for Reynolds stresses in the inner and outer regions of the boundary layer are also formulated. The shear and wall-normal Reynolds stress profiles normalised by these approximations exhibit a better collapse compared with friction velocity and Zagarola–Smits normalisations in the strong favourable pressure gradient region and in the mild adverse pressure region that precedes it in this flow. Simplification of these Reynolds stress approximations along with results from the DNS are used to obtain semi-empirical approximations that are able to provide stress closure in terms of wall solution fields for the turbulent boundary layer under consideration.

42 ENGINEERING↗
NASA NTRS1979

Turbulent flow and pumping in the cavity of a chemical laser

The kinetic theory of turbulent flow is employed to estimate an upper bound on the production rates of the lasing species in a free turbulent mixing layer. The maximum production rate is found to be about one third to one half of that predicted by a flame-sheet theory. The effects of turbulence scale and energy on the overall reaction rates are discussed and the gross structure of the combustion zone is determined.

Hayday, A. A.↗
NASA NTRS1977

Stellar occultations by turbulent planetary atmospheres. I - A heuristic scattering model. II - The Beta Scorpii events

Effects of atmospheric turbulence on stellar-occultation inversion procedures are investigated using a heuristic scattering model that is believed to reproduce the essential features of turbulence. A quantitative estimate is made of the size of the error in deducing the mean refractivity profile of a planetary atmosphere, taking into account constant as well as exponential scattering. It is shown that ordinary turbulence has no important effect on the average intensity profile in a stellar occultation but could have an important instantaneous effect. A critical examination of possible manifestations of turbulent scattering during occultations of Beta Sco by Jupiter indicates that all observed phenomena during these events can be understood in terms of scintillations produced by turbulence.

Hubbard, W. B.↗
NASA NTRS1994

Numerical investigation of supersonic turbulent boundary layers with high wall temperature

A direct numerical approach has been developed to simulate supersonic turbulent boundary layers. The mean flow quantities are obtained by solving the parabolized Reynolds-averaged Navier-Stokes equations (globally). Fluctuating quantities are computed locally with a temporal direct numerical simulation approach, in which nonparallel effects of boundary layers are partially modeled. Preliminary numerical results obtained at the free-stream Mach numbers 3, 4.5, and 6 with hot-wall conditions are presented. Approximately 5 million grid points are used in all three cases. The numerical results indicate that compressibility effects on turbulent kinetic energy, in terms of dilatational dissipation and pressure-dilatation correlation, are small. Due to the hot-wall conditions the results show significant low Reynolds number effects and large streamwise streaks. Further simulations with a bigger computational box or a cold-wall condition are desirable.

Guo, Y.↗
NASA NTRS1976

Estimation of characteristics and stochastic control of an aircraft flying in atmospheric turbulence

An adaptive control technique to improve the flying qualities of an aircraft in turbulence was investigated. The approach taken was to obtain maximum likelihood estimates of the unknown coefficients of the aircraft system and then, using these estimates along with the separation principle, to define the stochastic optimal control. The maximum likelihood estimation technique that accounted for the effects of turbulence provided good estimates of the unknown coefficients and of the turbulence. The assessment of the stochastic optimal control based on the maximum likelihood estimates showed that the desired effects were attained for the regulator problem of minimizing pitch angle and the tracking problem of requiring normal acceleration to follow the pilot input.

Iliff, K. W.↗
DOE OSTI2021

Diffraction of radio-frequency waves by plasma turbulence in the edge of a tokamak

The Mie-Lorenz-Debye theory of scattering of radio frequency waves (RF) by filamentary structures in the edge of a tokamak plasma has been established in prior publications. These results have been verified. Theory and computations show that RF can be reflected, refracted, and diffracted by turbulence. Furthermore, the filamentary structures lead to side scattering of waves and excitation of wave modes different from the launched RF. It is important to quantify the overall effect of turbulence on the propagation of RF since efficiency of heating and current drive by RF waves depends upon the wave characteristics. The commonly used RF ranges vary from the low frequency ion-cyclotron (IC) waves, to medium frequency lower-hybrid (LH) waves, to high-frequency electron cyclotron (EC) waves with wavelengths respectively, large, comparable, or smaller than the radial dimensions of the filaments. Currently, we discuss the scattering as well as the forces exerted by different RF in the edge plasma. Also, we present a code for 3D full wave scattering analysis of arbitrary tensor permittivity and plasma density profiles. The study is applicable to ITER-like plasmas, as well as to plasmas in medium sized tokamaks such as TCV, ASDEX-U and DIII-D and high field concepts like SPARC.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS2000

Turbulent Eddy Viscosity and Large-Scale Convection in the Sun

It is suggested here that the laminar character of the large-scale deep convective flows appearing in numerical simulations of the Sun's convective envelope arises from the effect of turbulent eddy viscosity. Previously, M. Schwarzchild suggested the same idea to explain the observed surface granulation in the Sun.

Stothers, Richard B.↗
NASA NTRS1995

Evaluation of phase-diversity techniques for solar-image restoration

Phase-diversity techniques provide a novel observational method for overcomming the effects of turbulence and instrument-induced aberrations in ground-based astronomy. Two implementations of phase-diversity techniques that differ with regard to noise model, estimator, optimization algorithm, method of regularization, and treatment of edge effects are described. Reconstructions of solar granulation derived by applying these two implementations to common data sets are shown to yield nearly identical images. For both implementations, reconstructions from phase-diverse speckle data (involving multiple realizations of turbulence) are shown to be superior to those derived from conventional phase-diversity data (involving a single realization). Phase-diverse speckle reconstructions are shown to achieve near diffraction-limited resolution and are validated by internal and external consistency tests, including a comparison with a reconstruction using a well-accepted speckle-imaging method.

Paxman, Richard G.↗
NASA NTRSDate not supplied

Validation of Two-phase Flow Modeling Techniques in Loci-Stream using Axial Jet Pressure Control and Autogenous Pressurization Experiment

Improvements to computational fluid dynamics modeling of cryogenic fluid management operations are presented with experimental validations. Modeling improvements includes utilizing improved delayed detaches eddy simulation to more effectively model turbulence compared to the Reynolds-averaged Navier Stokes modeling, modeling temperature dependent tank solid properties to capture large variation in thermodynamic properties at cryogenic conditions, modeling real gas equation of state for hydrogen instead of ideal gas behavior, and an on-going effort to improve interface turbulence transport for the volume of fluid method. Two flight-scale ground tests, five K-site tank axial jet pressure control experiments and an Engineering Design Unit tank autogenous pressurization experiment are validated and show the effectiveness of the improved modeling techniques. The successful validation establishes further trust in these models for flight project support and provides a pathway for maturation of in-development interface turbulence damping model for the volume of fluid method for more generalized applications.

CFD↗