Search NASA⌕ Search

SEARCH · Search NASA

Results for “failure analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

Summary of the nondestructive evaluation session

Advanced material systems and designs require improved nondestructive evaluation (NDE) techniques for quality control, failure analysis and properties monitoring. Some advanced NDE techniques such as infrared scanning systems, laser holographic applications and the use of the Mossbauer effect are outlined. Applications of these techniques are discussed for evaluating the new space shuttle external insulation materials, aircraft structures and engine components, and precursors to crack initiation and growth.

Stinebring, R. C.↗

A study of RSI under combined stresses

The behavior of typical rigidized surface insulation material (RSI) under combined loading states was investigated. In particular, the thermal stress states induced during reentry of the space shuttle were of prime concern. A typical RSI tile was analyzed for reentry thermal stresses under computed thermal gradients for a model of the RSI material. The results of the thermal stress analyses were then used to aid in defining typical combined stress states for the failure analysis of RSI.

Kibler, J. J.↗

Boundary layers in centrifugal compressors

The utility of boundary-layer theory in the design of centrifugal compressors is demonstrated. Boundary-layer development in the diffuser entry region is shown to be important to stage efficiency. The result of an earnest attempt to analyze this boundary layer with the best tools available is displayed. Acceptable prediction accuracy was not achieved. The inaccuracy of boundary-layer analysis in this case would result in stage efficiency prediction as much as four points low. Fluid dynamic reasons for analysis failure are discussed with support from flow data. Empirical correlations used today to circumnavigate the weakness of the theory are illustrated.

Dean, R. C., Jr.↗

The Helios experiment 5 antenna mechanism

The Experiment 5 Antenna deployment problem onboard Helios A, the failure analysis, and changes in design, test, and operation which led to a successful deployment of both antennas during the early Helios B mission phase are described.

Mueller, J. W.↗

Nickel cadmium cell composite reliability model

Ni-Cd battery reliability has become a critical design parameter with the increasing need for longer life and optimally designed secondary battery power systems in space as well as in more mundane applications. It is the purpose of this paper to present a state-of-the-art Ni-Cd cell reliability model as a function of cumulative cyclic operation, cell temperature and cyclic depth-of-discharge. In addition, a simple and convenient cell failure analysis technique will be presented in which the reliability, the distribution, and the distribution parameters can be determined by visual inspection.

Kirsch, W. W.↗

Interference fits and stress-corrosion failure

It is pointed out that any proper design of interference fit fastener, interference fit bushings, or stress coining processes should consider both the stress-corrosion susceptibility and fatigue-life improvement together. Investigations leading to such a methodology are discussed. A service failure analysis of actual aircraft parts is considered along with the stress-corrosion susceptibility of cold-working interference fit bushings. The optimum design of the amount of interference is considered, giving attention to stress formulas and aspects of design methodology.

Hanagud, S.↗

An active nutation damper for spacecraft

An active nutation damping device, consisting of an angular accelerometer, a dc motor driven flywheel, and associated electronics, was developed for spacecraft use. This damping system was used on the Lageos spacecraft, launched 4 May 1976, to control nutation buildup during the long coast period after the third stage separation. Of many electrical and mechanical design choices, an angular rather than linear accelerometer offered some advantages but problems developed in adapting the angular accelerometer to spacecraft use. The damper package was evaluated and proven on a three axis gas-bearing simulator that duplicated the Lageos spacecraft critical flight dynamics. A failure analysis of the damper assembly was performed. Performance of the damper during the Lageos flight has confirmed the preflight evaluation and analysis.

Abercrombie, R. A.↗

An active nutation damper for spacecraft

An active nutation damping device, consisting of an angular accelerometer, a dc-motor-driven flywheel, and associated electronics, developed for spacecraft use is described. This damping system was used on the LAGEOS spacecraft to control nutation buildup during the long coast period (approximately 75 minutes) after the third stage separation. The damper package was evaluated and proven on a three-axis gas-bearing simulator that duplicated the LAGEOS spacecraft critical flight dynamics. In addition, a failure analysis of the damper assembly was performed. Performance of the damper during the LAGEOS flight has confirmed the preflight evaluation and analysis.

Abercrombie, R. A.↗

Ku-band signal design study

Analytical tools, methods and techniques for assessing the design and performance of the space shuttle orbiter data processing system (DPS) are provided. The computer data processing network is evaluated in the key areas of queueing behavior synchronization and network reliability. The structure of the data processing network is described as well as the system operation principles and the network configuration. The characteristics of the computer systems are indicated. System reliability measures are defined and studied. System and network invulnerability measures are computed. Communication path and network failure analysis techniques are included.

Rubin, I.↗

Typical uses of NASTRAN in a petrochemical industry

NASTRAN was principally used to perform failure analysis and redesign process equipment. It was also employed in the evaluation of vendor designs and proposed design modifications to existing process equipment. Stress analysis of forced draft fans, distillation trays, metal stacks, jacketed pipes, heat exchangers, large centrifugal fans, and agitator support structures are described.

Winter, J. R.↗

Removing overcoatings from microcircuits

Silicone resin of elastomer overcoatings are removed more quickly from microcircuit chips with hot concentrated sulfuric acid. Process takes few minutes as compared to day or two, using commercial solvents based on toluene, xylene, and like. Overcoatings are removed to expose circuit for failure analysis.

Belcher, J. G., Jr.↗

JANTX1N3893 diode

Diodes manufactured by Siemens and Motorola were tested. Testing of Motorola diodes was stopped in all 3 groups because 50% failure-rate limit was reached. Siemens lot endured more testing in groups 1 and 2 and completed testing on group 3. Failure analysis was performed for group 2 testing.

Source record↗

JANTX1N5615 switching diode

Diodes manufactured by Semtech and Micro Semiconductor were tested. Both sample lots exceeded 50% fail-rate in all groups. Failure analysis was performed for groups 2 and 3.

Source record↗

JANTX1N5618 switching diode

Diodes tested were manufactured by Semtech and Micro Semiconductor. Semtech sample lots completed all three testings with only one catastrophic failure. All three Micro Semiconductor lots had several failure that were submitted for failure analysis.

Source record↗

An active nutation damper for spacecraft

An active nutation damping device, consisting of an angular accelerometer, a dc-motor-driven flywheel, and associated electronics, was developed for spacecraft use. This damping system was used on the LAGEOS spacecraft, launched May 4, 1976, to control nutation buildup during the long coast period (approximately 75 minutes) after the third stage separation. Of the many electrical and mechanical design choices involved, the use of an angular rather than linear accelerometer offers some advantages. There are some problems of adapting the angular accelerometer to spacecraft use. The damper package was evaluated and proven on a three-axis gas-bearing simulator that duplicated the LAGEOS spacecraft critical flight dynamics. A failure analysis of the damper assembly was performed.

Abercrombie, R. A.↗

Transistor screening evaluation SJ6708H

A manufacturer was contracted to screen 125 transistors capable of withstanding the high level inductive voltages obtained when switching inductive loads. Planned differences included a change in die bonding to comply with NASA's desire for hard solder die attachment which further necessitated a change in package to conform to the required die mounting system. Evaluation of the electrical performance and recommended changes were made during the preliminary build phase of the program. The following sections are outlined: (1) narrative outline; (2) customer data summary and X-ray reports; (3) device specification; (4) failure analysis reports; (5) test facilities list; and (6) test measurement data.

Barton, J. L.↗