Search NASA⌕ Search

SEARCH · Search NASA

Results for “hover”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Fundamental Aeroelastic Analysis of an Urban Air Mobility Rotor

A computational investigation was conducted of the aeroelastic characteristics of a representative rotor typical of aircraft for Urban Air Mobility. A rotorcraft comprehensive analysis was used to examine the aeroelastic characteristics of the model, both in hover and in forward flight. Throughout the study, parameters examined included rotor rotational speed, forward flight speed, blade torsion stiffness, and chordwise locations of the blade elastic axis and center of gravity. Three sets of airfoil properties were analyzed: NACA 0012, VR8, and VR12. For hover, the effect of dynamic inflow was studied via a comparison of uniform inflow and dynamic inflow models. Thrust coefficient and blade tip twist were analyzed to ascertain performance characteristics, and eigen analysis was employed to determine stability. For the forward flight cases, rpm and forward flight speed were swept separately, and the effect of each on performance and stability was assessed. Thrust coefficient and mean drag coefficient were used to evaluate performance of the rotor, and eigen analysis was invoked to study rotor stability. Forward flight stability results generated via a constant coefficient analysis were compared with results generated via Floquet Theory.

Fundamental Aeroelastic Analysis↗
NASA NTRSDate not supplied

Structural Design and Aeromechanical Analysis of Unconventional Blades for Future Mars Rotorcraft

The structural design for rotor blades with thin, unconventional airfoils for Earth-based testing is obtained using three-Dimensional (3D) aeromechanical analysis. This analysis is in support of the NASA ROAMX project. The outer mold was provided by NASA, but the internal structural design was developed at the University of Maryland and is presented here, along with a thorough aeromechanical analysis. The main objectives are to verify the structural integrity of the design and understand the unique aeroelastic behavior of the non-conventional airfoils designed for low-Reynolds number and high-Mach number flow. Six different blade models are considered, with the pitch axis varied from quarter-chord to mid-chord to determine the effect of C.G. offset on natural frequencies, blade deformations, root loads, and 3D stresses. All six blade designs are first studied under rotation in pure vacuum, and significant reductions in root loads and 3D stresses are achieved by moving the pitch axis closer to mid-chord to reduce the C.G. offset. Based on the vacuum analysis, the blade design with the pitch axis at 40% chord is selected for aerodynamic analysis. The blade control load, airloads, deformations, and 3D stresses are studied for steady hover. Dynamic control load and dynamic 3D stresses are studied for unsteady hover achieved using cyclic. Significant elastic twist is observed due to the trapeze effect and propeller moment, affecting the spanwise distribution of aerodynamic loads on the blades. However, the effect of aerodynamic loads on 3D stresses and the blade control load is found to be minimum. The dynamic control load is found to increase significantly due to inertial coupling from the C.G. offset. The dynamic stresses also increase, although still have factors of safety greater than two for both tensile and compressive stress.

Structural Design↗
NASA NTRS2023

Structural Design and Aeromechanical Analysis of Unconventional Blades for Future Mars Rotorcraft

The structural design for rotor blades with thin, unconventional airfoils for Earth-based testing is obtained using three-Dimensional (3D) aeromechanical analysis in support of the NASA ROAMX project. The outer mold line was provided by NASA, but the internal structural design was developed at the University of Maryland and is presented here along with a thorough aeromechanical analysis. The main objectives are to verify the structural integrity of the design and understand the unique aeroelastic behavior of the non-conventional airfoils designed for low-Reynolds number and high subsonic Mach number. Four different blade models are considered, with the pitch axis varied from quarter-chord to mid-chord to determine the effect of C.G. offset on natural frequencies, blade deformations, root loads, and 3D stresses. First, torsional stability is calculated for each of the designs – especially important due to the low Lock number on Mars. All four blade designs are studied under rotation in vacuum, and significant reductions in root loads and 3D stresses are achieved by moving the pitch axis closer to mid-chord to reduce the C.G. offset. Based on the vacuum analysis, the blade design with the pitch axis at 40% chord is selected for aeromechanical analysis. The blade control load, airloads, deformations, and 3D stresses are studied for steady hover. Dynamic control load and dynamic 3D stresses are studied for unsteady hover achieved using cyclic. Significant elastic twist is observed due to the trapeze effect and propeller moment, affecting the spanwise distribution of aerodynamic loads on the blades. The dynamic control load is found to increase significantly due to inertial coupling from the C.G. offset. The dynamic stresses also increase, although still have factors of safety greater than two for both tensile and compressive stress.

Structural Design↗
NASA NTRSDate not supplied

Predicted Performance Effects of Blade Elasticity on Testing of Rotors for Mars

The Rotor Optimization for the Advancement of Mars Exploration project (ROAMX) has designed and manufactured a set of rotor blades optimized for hover on Mars. These blades will soon be tested for hover performance in the NASA Ames Research Center Planetary Aeolian Laboratory, a large vacuum chamber capable of rotor testing at reduced pressures. To match the tip Mach numbers during this testing with the tip Mach numbers that would be experienced in the Martian atmosphere, the rotor will be spun faster in the vacuum chamber than it would be spun on Mars. While this accomplishes the goal of simulating the tip Mach numbers of Mars operations, the elevated RPM may have undesired consequences for performance, due to elastic deflections of the blades. The purpose of this paper is to use CAMRAD II, a rotorcraft comprehensive analysis code, to predict the effect on performance of blade elasticity at elevated RPM in the vacuum chamber environment. Results are presented for different thrust conditions and different rotor speeds, and comparisons are made between rigid and elastic blade predictions. Overall, the CAMRAD II analysis suggests that blade elasticity does influence rotor performance in the operating conditions of interest, although the effect is moderate enough to conclude that the PAL testing will be a good simulation of Mars operation.

Blade elasticity↗
NASA NTRSDate not supplied

Simulation of the Rotorwash Induced by a Quadrotor Urban Air Taxi in Ground Effect

A rotorcraft hovering near the ground causes downwash and outwash. The impact of these induced velocities on urban air mobility operations has not been extensively quantified. This paper explores the opportunity of using CFD to perform dedicated studies on the aerodynamics of rotorcraft in ground effect (IGE). For this purpose, we compare load and flow predictions obtained with the high-fidelity CFD solver OVERFLOW and with a medium-fidelity vortex particle-mesh (VPM) method, for a single rotor IGE. We show that the computational cost of high-fidelity simulation makes it impractical to sweep through a large number of configurations or operating conditions. However, a small set of cases can be used to verify a medium-fidelity tool. The latter provides a better trade-off between “accuracy” and computational intensity, which enables numerous, longer simulations at a more affordable cost. As an example, the outwash flow is computed for two different designs of a quadrotor air taxi in hover and reveals the existence of increased velocities between the rotors. This work illustrates how CFD can help identify dangerous areas for passengers and ground personnel when they approach the vehicle.

HECC↗
NASA NTRSDate not supplied

A Field-Deployable Wireless Data Acquisition System for Ground-Test Arrays

This paper describes the development, characterization, and deployment of a field-deployable wireless data acquisition system for ground-test arrays, applicable in noise-source localization or beamforming measurements such as those encountered during airframe noise flyover measurement tests. The system design is enabled by commercially available, low-power Internet of Things (IoT) processors and Wi-Fi communication components. Time is synchronized across the array wirelessly by leveraging the Coordinated Universal Time (UTC) time provided by the Global Positioning System (GPS). Initial laboratory characterization of the system demonstrated its ability to meet acoustic bandwidth, dynamic range, time synchronization, environmental, and battery life requirements for typical ground-test array deployments. A successful system deployment at NASA Langley was performed that included measurement of a suspended elevated static noise source, and Uncrewed Aerial System (UAS) vehicle measurements using a quadcopter operated both in hover mode and forward flight. Beamform analysis of the acquired data showed an excellent ability of the array to extract accurate sound pressure levels from the suspended source. Synchronization of the array and vehicle GPS timecodes allowed the ability to extract acoustic signatures from the UAS vehicle during hover and forward flight maneuvers over the array. These results validate that the use of a high channel count wireless array is advantageous in airframe and propulsion noise flyover test campaigns.

wireless↗
NASA NTRSDate not supplied

Simplified Vehicle Control Concept for a Lift Plus Cruise eVTOL Vehicle

Electric Vertical Takeoff and Landing (eVTOL) vehicles have the potential to enable cost effective Urban Air Mobility (UAM) applications. These concepts may also pose several challenging handling and control problems, which must be addressed prior to safe and reliable urban operations. This paper investigates a simplified vehicle control concept that is designed to address some of these challenges for a conceptual Lift Plus Cruise vehicle designed by NASA’s Revolutionary Vertical Lift Technology (RVLT) project. The command and control architecture for this concept is presented along with preliminary findings. Initial results explore the vehicle performance in an approach to hover transition scenario, designed to explore the challenge of dissipating energy across all flight regimes. Operational concepts with varying aggressiveness are evaluated through changing glideslope and deceleration rates. Preliminary results show that the simplified control concept is effective over these operational conditions, with control strategies and envelope protection limits able to maintain control though aggressive operations despite saturation at steeper slopes with higher deceleration rates. Final results will show piloted simulation evaluations in the the Aerospace Cognitive Engineering Lab – Rapid Automation Test Environment (ACEL-RATE) laboratory at NASA Ames Research Center. The planned tests will build on these operations with additional test cases exploring variations in wind conditions as well as transition-to-hover automation strategies and display information.

simplified vehicle control↗
NASA NTRS2024

Fundamental Proprotor Design Considerations

The purpose of this technical memorandum is to document some of the fundamental considerations in the aerodynamic design of a proprotor blade, which include distributions of twist, chord, and thickness. A proprotor is expected to operate efficiently in different speed regimes, such as hover and forward flight, which presents challenges that are unique from designing either rotors or propellers. Operating in hover and at high advance ratios in cruise present conflicting design requirements on the blade's geometry that must be reconciled with the vehicle's mission. Though a proprotor must also fly in edgewise and other non-axial flight phases, these portions of the mission do not typically drive the proprotor's aerodynamic design. This memorandum describes an approach to integrate a blade's twist and chord distributions to provide an aerodynamic performance estimate that could be coupled with other design considerations, such as acoustics or structures. The intended audience for this memorandum is engineers beginning to work in this discipline who are looking for a primer on the behavior of proprotor performance and design considerations. The memorandum is not intended as a step-by-step guide to designing proprotors, nor does it provide insight into more advanced proprotor design/analysis tools.

Rotor Aerodynamics↗
NASA NTRSDate not supplied

Identification and Computation of Individual Propeller Acoustics of the Joby Aviation Aircraft

The individual propeller sources of the Joby Aviation aircraft are separated using an order tracking filter on measurement data and computed using high- fidelity computational fluid dynamics (CFD) to quantify the relative contributions to the total noise. Computational results are verified against experimental data for hover and steady level flight at 60 knots and demonstrate very good agreement of both overall sound pressure level magnitude and directivity. The propeller source separation for hover shows good agreement between the methods except for the inboard propellers, and it is expected that the assumptions in the CFD model do not accurately capture the flight test condition. Both methods are able to separate the higher tonal levels generated by the tail propellers due to the aerodynamic interaction. Overall, considering the discrepancies between the CFD model and flight test, the agreement in Vold-Kalman-filtered results and prediction yields confidence that the separation method is successful.

eVTOL↗
NASA NTRSDate not supplied

Training the Powered-Lift Evaluation Pilot

This poster describes a project to prepare pilots for a study assessing novel aircraft automation concepts for electric Vertical Takeoff and Landing (eVTOL) aircraft using NASA’s Vertical Motion Simulator (VMS). By exploring the operational and learning challenges related to transitioning between forward flight and vertical landing, we seek to establish baselines of pilot workload and aircraft handling qualities across varying atmospheric conditions and automation states. The simulated eVTOL design differentiates flight control allocations as a function of airspeed across four speed ranges as the vehicle transitions between fully thrust-borne lift and wing-borne lift. As speed increases, side stick controls command: translational ground speeds, vertical and lateral acceleration, vertical rate, vertical flight path angle, and bank angle. This novel approach to flight control allocation creates a significant learning challenge for pilots. Since initial eVTOL aircraft may have limitations on hover capabilities, automation and flight guidance cues also vary with airspeed to provide efficient landing profiles while still providing cues suitable for cruise flight. The NASA team prepared the study pilots to follow these flight guidance cues along curved Required Navigation Performance (RNP) approaches and along 6o and 12o glide paths to energy-efficient assistive-hover landing and goarounds. The pre-VMS preparation sought to prepare pilots from diverse levels of experience and background. To do this, NASA researchers designed and developed a fixed-based, large field-ofview simulator with terrain, structures, and air traffic. With one day of combined classroom learning and skill development in the fixedbase simulator, pilots were largely able to fly the simulated eVTOL in the VMS with sufficient mastery to provide handling quality assessments using the Cooper-Harper Handling Qualities Rating and workload assessments through the Bedford Workload Scale.

AAM↗
DOE OSTI2018

Sensing and Sampling of Trace Contaminations by a Dexterous Hexrotor UAV at Nuclear Facilities - 18600

Safe and efficient cleanups are a priority for decontamination and decommissioning of nuclear facilities. The contaminations of byproducts and wastes in such nuclear facilities pose a serious problems while decommissioning, to both the operators and public. Sensing these contaminations and cleaning them is an essential part of the safety procedures. The contaminations might range from low-energy to high-energy byproducts. Sensing these byproducts would require contact based or non-contact based sensing, based on its energy levels. Byproducts such as americium, are low-energy which makes it difficult to sense and sample without contact. Therefore, the workers need to physically swab the surfaces to collect the samples of these contaminations. These tasks pose a great danger for the safety of the human workers which includes the risk to reach greater heights, exposure to the radiation and sampling the entire building. A robotic solution is much more desirable in these cases, where the worker can safely handle the contaminations from a safe area. Use of robotic technologies inside these hazardous environments ensures the safety and enhances the performance. The more suitable robotic solution for reaching great heights and covering large areas of nuclear facilities, are aerial vehicles. Multi-rotor unmanned aerial vehicle (UAV) are chosen for their ability to hover at a position and also fly around in confined spaces. Quadrotors are a common choice of multi-rotor UAVs both research and industry because of its ease to fly and commercial availability. For the applications during the cleanups we need the UAV to not only hover and fly in confined spaces, but also interact with the physical world. Despite of quadrotor's advantages, they are not a best suit as they can't interact with the physical world. The tasks involving physical interactions would require the UAV to apply arbitrary forces and torques in all six degrees of freedom (DOF). As quadrotors are under-actuated and non-holonomic in motion, they cannot exert all the required forces. At Collaborative Robotics Lab, Purdue University, we developed a novel multi-rotor UAV solution, Dexterous Hexrotor, which can exert arbitrary forces and torques in all six DOF, independently and instantaneously. This enables the UAV platform to quickly respond to the external disturbances and precisely hold its position during the mission. The Dexterous Hexrotor serves as a robotic tool for the workers to perform sensing and sampling during the cleanups. Workers can operate Dexterous Hexrotor manually and/or semi-autonomously with human intervention. Manual control requires the worker to fly the Dexterous Hexrotor using a remote control. So the workers should possess knowledge on flying the UAV and to perform physical interaction. A semiautonomous Dexterous Hexrotor requires human input to some extent and requires very less knowledge of flying. The autonomy is designed to operate in flight mode and sampling mode. In flight mode, Dexterous Hexrotor takes off from a 'safe' area, reaches the desired altitude, and fly autonomously towards a sampling point. This sampling point is the target position specified on the 2D reference map. This mode also includes navigation towards the sampling point, avoiding the obstacles in the constrained environment. After reaching a stopping point, Dexterous Hexrotor waits for the human input for a target location to swab and collect samples. The Dexterous Hexrotor is now in sampling mode and waits for the human input. The human operator selects the swabbing location through the live streaming video from onboard camera. Through visual servoing, aided by the map, the UAV will move closer towards the target position. It then transitions to the impact control scheme to perform physical interaction with the wall and collects samples. Once the sample is collected, it autonomously returns back to the takeoff position in 'safe' area for the analysis by mass spectrometry. In this paper, we majorly focus on the physical interaction strategy and the required components which enables the autonomy. Decommissioning of nuclear facilities requires decontamination inside the entire buildings. Decontamination of nuclear facilities involves sensing and sampling the huge buildings, long shafts, etc. Sampling the entire facility is not possible due to the limitation in Dexterous Hexrotor's flight time. But this can be achieved by using a swarm of Dexterous Hexrotors to cover larger areas. The onboard robotic arm can be designed based on the applications such as cleaning, applying sealants, etc. The modularity of the design allows us to switch components as per the requirements of the task. These kind of robotic solutions functioning as tools for the workers, aims to make the work environment safer and playful. (authors)

42 ENGINEERING↗