Search NASA⌕ Search

SEARCH · Search NASA

Results for “implicit methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

Aeroelastic oscillations of a cantilever with structural nonlinearities: theory and numerical simulation.

Our study details the derivation of the nonlinear equations of motion for the axial, biaxial bending and torsional vibrations of an aeroelastic cantilever undergoing rigid body (pitch) rotation at the base. The primary attenstion is focussed on the geometric nonlinearities of the system, whereby the aeroelastic load is modeled by the theory of linear quasisteady aerodynamics. This modelling effort is intended to mimic the wind-tunnel experimental setup at the Royal Military College of Canada. While the derivation closely follows the work of Hodges and Dowell [1] for rotor blades, this aeroelastic system contains new inertial terms which stem from the fundamentally different kinematics than those exhibited by helicopter or wind turbine blades. Using the Hamilton’s principle, a set of coupled nonlinear partial differential equations (PDEs) and an ordinary differential equation (ODE) are derived which describes the coupled axial-bending-bending-torsion-pitch motion of the aeroelastic cantilever with the pitch rotation. The finite dimensional approximation of the coupled system of PDEs are obtained using the Galerkin projection, leading to a coupled system of ODEs. Subsequently, these nonlinear ODEs are solved numerically using the built-in MATLAB implicit ODE solver and the associated numerical results are compared with those obtained using Houbolt’s method. It is demonstrated that the system undergoes coalescence flutter, leading to a limit cycle oscillation (LCO) due to coupling between the rigid body pitching mode and teh flexible mode arising from the flapwise bending motion.

42 ENGINEERING↗

Moment-based adaptive time integration for thermal radiation transport

Here, in this paper we develop a framework for moment-based adaptive time integration of deterministic multifrequency thermal radiation transpot (TRT). We generalize our recent semi-implicit-explicit (IMEX) integration framework for gray TRT to multifrequency TRT, and also introduce a semi-implicit variation that facilitates higher-order integration of TRT, where each stage is implicit in all components except opacities. To appeal to the broad literature on adaptivity with Runge–Kutta methods, we derive new embedded methods for four asymptotic preserving IMEX Runge–Kutta schemes we have found to be robust in our previous work on TRT and radiation hydrodynamics. We then use a moment-based high-order-low-order representation of the transport equations. Due to the high dimensionality, memory is always a concern in simulating TRT. We form error estimates and adaptivity in time purely based on temperature and radiation energy, for a trivial overhead in computational cost and memory usage compared with the base second order integrators. We then test the adaptivity in time on the tophat and Larsen problem, demonstrating the ability of the adaptive algorithm to naturally vary the timestep across 4–5 orders of magnitude, ranging from the dynamical timescales of the streaming regime to the thick diffusion limit.

97 MATHEMATICS AND COMPUTING↗

An in-line burn-up algorithm: proposal and preliminary analysis

A new burn-up algorithm is proposed for coupling neutronics and isotopic depletion. The algorithm is analogous to those proposed for enforcing xenon equilibrium and converging neutronics and thermal-hydraulics. During the corrector step of standard predictor-corrector methods, the corrector nuclide density is updated as neutronics converges. This is expected to improve stability while reducing computational expense compared to other implicit algorithms. The stability of the algorithm is investigated by Fourier analysis for a simple case whose results have been successfully compared with numerical experiments.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

An Augmented Lagrangian Method for a Class of Inverse Quadratic Programming Problems

We consider an inverse quadratic programming (QP) problem in which the parameters in the objective function of a given QP problem are adjusted as little as possible so that a known feasible solution becomes the optimal one. We formulate this problem as a minimization problem with a positive semidefinite cone constraint and its dual is a linearly constrained semismoothly differentiable (SC{sup 1}) convex programming problem with fewer variables than the original one. We demonstrate the global convergence of the augmented Lagrangian method for the dual problem and prove that the convergence rate of primal iterates, generated by the augmented Lagrange method, is proportional to 1/r, and the rate of multiplier iterates is proportional to 1/{radical}r, where r is the penalty parameter in the augmented Lagrangian. As the objective function of the dual problem is a SC{sup 1} function involving the projection operator onto the cone of symmetrically semi-definite matrices, the analysis requires extensive tools such as the singular value decomposition of matrices, an implicit function theorem for semismooth functions, and properties of the projection operator in the symmetric-matrix space. Furthermore, the semismooth Newton method with Armijo line search is applied to solve the subproblems in the augmented Lagrange approach, which is proven to have global convergence and local quadratic rate. Finally numerical results, implemented by the augmented Lagrangian method, are reported.

97 MATHEMATICS AND COMPUTING↗

The XTOR code for nonlinear 3D simulations of MHD instabilities in tokamak plasmas

The latest version of the XTOR code which solves a set of the extended magnetohydrodynamic (MHD) equations in toroidal geometry is presented. The numerical method is discussed with particular emphasis on critical issues leading to numerical stability and robustness. This includes the time advance algorithm, the choice of variables and the boundary conditions. The physics in the model includes resistive MHD, anisotropic thermal diffusion and some neoclassical effects. The time advance method used in XTOR is unconditionally stable for linear MHD. First, both the ideal and the resistive MHD parts of the equations are advanced semi-implicitly and then the thermal transport part full-implicitly, using sub-stepping [H. Luetjens, Comp. Phys. Commun. 164 (2004) 301]. The time steps are only weakly limited by the departure of the nonlinear MHD dynamics from the linear one and are automatically defined by a set of nonlinear stability criteria. The robustness of the method is illustrated by some numerically difficult simulations, i.e. sawtooth simulations, the nonlinear destabilization of ballooning instabilities by an internal kink, and the dynamics of a neoclassical tearing mode in International Thermonuclear Experimental Reactor (ITER) [R. Aymar, V.A. Chuyanov, M. Huguet, et al., Nucl. Fusion 41 (2001) 1301] like geometry about its nonlinear stability threshold.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A least-squares finite element method based on the Helmholtz decomposition for hyperbolic balance laws

In this paper, a least-squares finite element method for scalar nonlinear hyperbolic balance laws is proposed and studied. The approach is based on a formulation that utilizes an appropriate Helmholtz decomposition of the flux vector and is related to the standard notion of a weak solution. This relationship, together with a corresponding connection to negative-norm least-squares, is described in detail. As a consequence, an important numerical conservation theorem is obtained, similar to the famous Lax–Wendroff theorem. The numerical conservation properties of the method in this paper do not fall precisely in the framework introduced by Lax and Wendroff, but they are similar in spirit as they guarantee that when L 2 convergence holds, the resulting approximations approach a weak solution to the hyperbolic problem. The least-squares functional is continuous and coercive in an H -1 -type norm, but not L 2 -coercive. Nevertheless, the L 2 convergence properties of the method are discussed. Convergence can be obtained either by an explicit regularization of the functional, that provides control of the L 2 norm, or by properly choosing the finite element spaces, providing implicit control of the L 2 norm. Numerical results for the inviscid Burgers equation with discontinuous source terms are shown, demonstrating the L 2 convergence of the obtained approximations to the physically admissible solution. The numerical method utilizes a least-squares functional, minimized on finite element spaces, and a Gauss–Newton technique with nested iteration. Finally, we believe that the linear systems encountered with this formulation are amenable to multigrid techniques and combining the method with adaptive mesh refinement would make this approach an efficient tool for solving balance laws (this is the focus of a future study).

97 MATHEMATICS AND COMPUTING↗

SOLVING CONJUGATE HEAT TRANSFER PROBLEM IN TWO-PHASE FLOW USING NEWTON-KRYLOV METHOD

In this paper, we successfully demonstrated an application of the Jacobian-free Newton Krylov (JFNK) method in solving the conjugated two-phase channel flow and heat conduction problem, in a fully coupled and fully implicit manner. Such a problem represents the most fundamental piece of safety analysis codes, for example the heat transfer between fuel rods and reactor coolant during postulated accidental scenarios. The two-phase flow is modeled with the widely accepted one-dimensional two-fluid two-phase flow model, and the heat conduction is modeled with two-dimensional heat conduction model. The coupling between these two physics is realized through the wall heat transfer term in fluid equations and heat flux boundary conditions of heat conduction model. For spatial discretization, both the first-order and second- order upwind schemes are considered for flow equations, while the standard central differencing method is used for the heat conduction model. For time integration, both the first-order backward Euler (BDF1) and second-order BDF2 schemes are considered. Several treatments were also introduced to enhance the robustness of the JFNK method in solving such a problem that is discontinuous in nature because of the discrete closure correlations. These treatments include the re-introduction of a transition region between the slug and annular mist flow regimes, and a simplification in the interfacial drag term. Numerical results have been extensively validated with experimental data in both vertical pipe and rod bundle geometries with a wide range of thermal-hydraulics conditions, including pressure, inlet subcooling, wall heat flux, outlet void fraction, and etc. Further benchmark with the RELAP5-3D code confirms the correct implementation of wall heat transfer models.

42 ENGINEERING↗

On differentiable local bounds preserving stabilization for Euler equations

This work presents the design of nonlinear stabilization techniques for the finite element discretization of Euler equations in both steady and transient form. Implicit time integration is used in the case of the transient form. A differentiable local bounds preserving method has been developed, which combines a Rusanov artificial diffusion operator and a differentiable shock detector. Nonlinear stabilization schemes are usually stiff and highly nonlinear. This issue is mitigated by the differentiability properties of the proposed method. Moreover, in order to further improve the nonlinear convergence, we also propose a continuation method for a subset of the stabilization parameters. The resulting method has been successfully applied to steady and transient problems with complex shock patterns. Numerical experiments show that it is able to provide sharp and well resolved shocks. Furthermore, the importance of the differentiability is assessed by comparing the new scheme with its non-differentiable counterpart. Numerical experiments suggest that, for up to moderate nonlinear tolerances, the method exhibits improved robustness and nonlinear convergence behavior for steady problems. Additionally, in the case of transient problem, we also observe a reduction in the computational cost.

42 ENGINEERING↗

Multi-center semi-empirical quantum models for carbon under extreme thermodynamic conditions

We report on the development of many-body density functional tight binding (DFTB) models for carbon, which include either explicit or implicit calculation of multi-center terms in the Hamiltonian. Here, we show that all of our methods yield accurate eigenstates and eigenfunctions for both ambient diamond and transitions to molten, metallic states. We then determine a three-body repulsive energy to compute accurate equation of state and structural properties for carbon under these conditions. Our results indicate a straightforward approach by which many-body effects can be included in DFTB, thus extending the method to a wide variety of systems and thermodynamic conditions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Including the effects of temperature-dependent opacities in the implicit Monte Carlo algorithm

The Implicit Monte Carlo technique of Fleck and Cummings is often employed to numerically simulate radiative transfer. This method achieves greater stability than one with a fully explicit time discretization by estimating the t{sup n+1} value of T{sup 4} from the thermal emission term, which is proportional to T{sup 4}. In the Fleck and Cummings algorithm, this results in decreasing the absorption by the so-called 'Fleck factor', and adding a corresponding amount of effective scattering. We show how to include the effects of the temperature-dependent opacity to the estimated t{sup n+1} value of the thermal emission term. This results in the addition to the 'Fleck factor' of a term that depends on (d{sigma})/(dT) . We demonstrate that this modification allows for more accurate solutions with much larger time steps for problems with opacities that have a strong temperature dependence.

97 MATHEMATICS AND COMPUTING↗

Numerical schemes for 3-wave kinetic equations: A complete treatment of the collision operator

In our previous work Walton and Tran (2023), numerical schemes for a simplified version of 3-wave kinetic equations, in which only the simple forward-cascade terms of the collision operators are kept, have been successfully designed, especially to capture the long time dynamics of the equation given the multiple blow-up time phenomenon. In this second work in the series, we propose numerical treatments for the complete 3-wave kinetic equations, in which the complete, much more complicated collision operators are fully considered based on a novel conservative form of the equation. Here we then derive an implicit finite volume scheme to solve the equation. The new discretization uses an adaptive time-stepping method which allows for the simulations to be carried to very long times. Our computed solutions are compared with previously derived long-time asymptotic estimates for the decay rate of total energy of time-dependent solutions of 3-wave kinetic equations and found to be in excellent agreement.

97 MATHEMATICS AND COMPUTING↗

On the use of finite difference matrix-vector products in Newton-Krylov solvers for implicit climate dynamics with spectral elements

Efficient solutions of global climate models require effectively handling disparate length and time scales. Implicit solution approaches allow time integration of the physical system with a step size governed by accuracy of the processes of interest rather than by stability of the fastest time scales present. Implicit approaches, however, require the solution of nonlinear systems within each time step. Usually, a Newton's method is applied to solve these systems. Each iteration of the Newton's method, in turn, requires the solution of a linear model of the nonlinear system. This model employs the Jacobian of the problem-defining nonlinear residual, but this Jacobian can be costly to form. If a Krylov linear solver is used for the solution of the linear system, the action of the Jacobian matrix on a given vector is required. In the case of spectral element methods, the Jacobian is not calculated but only implemented through matrix-vector products. The matrix-vector multiply can also be approximated by a finite difference approximation which may introduce inaccuracy in the overall nonlinear solver. In this paper, we review the advantages and disadvantages of finite difference approximations of these matrix-vector products for climate dynamics within the spectral element shallow water dynamical core of the Community Atmosphere Model.

54 ENVIRONMENTAL SCIENCES↗

Steady-state benchmarks of DK4D: A time-dependent, axisymmetric drift-kinetic equation solver

The DK4D code has been written to solve a set of time-dependent, axisymmetric, finite-Larmor-radius drift-kinetic equations (DKEs) for the non-Maxwellian part of the electron and ion distribution functions using the full, linearized Fokker–Planck–Landau collision operator. The plasma is assumed to be in the low- to finite-collisionality regime, as is found in the cores of modern and future magnetic confinement fusion experiments. Each DKE is formulated such that the perturbed distribution function carries no net density, parallel momentum, or kinetic energy. Rather, these quantities are contained within the background Maxwellians and would be evolved by an appropriate set of extended magnetohydrodynamic (MHD) equations. This formulation allows for straight-forward coupling of DK4D to existing extended MHD time evolution codes. DK4D uses a mix of implicit and explicit temporal representations and finite element and spectral spatial representations. These, along with other computational methods used, are discussed extensively. Steady-state benchmarks are then presented comparing the results of DK4D to expected analytic results at low collisionality, qualitatively, and to the Sauter analytic fits for the neoclassical conductivity and bootstrap current, quantitatively. These benchmarks confirm that DK4D is capable of solving for the correct, gyroaveraged distribution function in stationary magnetic equilibria. Furthermore, the results presented demonstrate how the exact drift-kinetic solution varies with collisionality as a function of the magnetic moment and the poloidal angle.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Magnetohydrodynamic simulation study of plasma jets and plasma-surface contact in coaxial plasma accelerators

Recent experiments by Loebner et al. [IEEE Trans. Plasma Sci. 44, 1534 (2016)] studied the effect of a hypervelocity jet emanating from a coaxial plasma accelerator incident on target surfaces in an effort to mimic the transient loading created during edge localized mode disruption events in fusion plasmas. In this study, we present a magnetohydrodynamic (MHD) numerical model to simulate plasma jet formation and plasma-surface contact in this coaxial plasma accelerator experiment. The MHD system of equations is spatially discretized using a cell-centered finite volume formulation. The temporal discretization is performed using a fully implicit backward Euler scheme and the resultant stiff system of nonlinear equations is solved using the Newton method. The numerical model is employed to obtain some key insights into the physical processes responsible for the generation of extreme stagnation conditions on the target surfaces. Simulations of the plume (without the target plate) are performed to isolate and study phenomena such as the magnetic pinch effect that is responsible for launching pressure pulses into the jet free stream. The simulations also yield insights into the incipient conditions responsible for producing the pinch, such as the formation of conductive channels. The jet-target impact studies indicate the existence of two distinct stages involved in the plasma-surface interaction. A fast transient stage characterized by a thin normal shock transitions into a pseudo-steady stage that exhibits an extended oblique shock structure. A quadratic scaling of the pinch and stagnation conditions with the total current discharged between the electrodes is in qualitative agreement with the results obtained in the experiments. Finally, this also illustrates the dominant contribution of the magnetic pressure term in determining the magnitude of the quantities of interest.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Accelerating Noisy VQE Optimization with Gaussian Processes

Hybrid variational quantum algorithms, which combine a classical optimizer with evaluations on a quantum chip, are the most promising candidates to show quantum advantage on current noisy, intermediate-scale quantum (NISQ) devices. The classical optimizer is required to perform well in the presence of noise in the objective function evaluations, or else it becomes the weakest link in the algorithm. We introduce the use of Gaussian Processes (GP) as surrogate models to reduce the impact of noise and to provide high quality seeds to escape local minima, whether real or noise-induced. We build this as a framework on top of local optimizations, for which we choose Implicit Filtering (ImFil) in this study. ImFil is a state-of-the-art, gradient-free method, which in comparative studies has been shown to outperform on noisy VQE problems. The result is a new method: "GP+ImFil". We show that when noise is present, the GP+ImFil approach finds results closer to the true global minimum in fewer evaluations than standalone ImFil, and that it works particularly well for larger dimensional problems. Using GP to seed local searches in a multi-modal landscape shows mixed results: although it is capable of improving on ImFil standalone, it does not do so consistently and would only be preferred over other, more exhaustive, multistart methods if resources are constrained.

Muller, Juliane↗

Progress on PRONGHORN Application to NGNP Related Problems

We are developing a multiphysics simulation tool for Very High-Temperature gascooled Reactors (VHTR). The simulation tool, PRONGHORN, takes advantages of the Multiphysics Object-Oriented Simulation library, and is capable of solving multidimensional thermal-fluid and neutronics problems implicitly in parallel. Expensive Jacobian matrix formation is alleviated by the Jacobian-free Newton-Krylov method, and physics-based preconditioning is applied to improve the convergence. The initial development of PRONGHORN has been focused on the pebble bed corec concept. However, extensions required to simulate prismatic cores are underway. In this progress report we highlight progress on application of PRONGHORN to PBMR400 benchmark problems, extension and application of PRONGHORN to prismatic core reactors, and progress on simulations of 3-D transients.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Inverse Sensitivity/Uncertainty Methods Development for Nuclear Fuel Cycle Applications

The Standardized Computer Analyses for Licensing Evaluation (SCALE) software package developed at the Oak Ridge National Laboratory includes codes that propagate uncertainties available in the nuclear data libraries to compute uncertainties in nuclear application performance parameters (responses). We report on our recently commenced eorts to extend this capability to develop an inverse sen- sitivity/uncertainty (IS/U) methodology that identies the improvements in nuclear data that are needed to compute application responses within prescribed tolerances, while minimizing the cost of such data improvements. We report on our progress to date and present a simple test case for our method. Our methodology is directly applicable to thermal and intermediate neutron energy systems because it addresses the implicit neutron resonance self-shielding eects that are essential to accurate modeling of thermal and intermediate systems. This methodology is likely to increase the eciency of nuclear data eorts.

Arbanas, Goran↗

On the Use of Finite Difference Matrix-Vector Products in Newton-Krylov Solvers for Implicit Climate Dynamics with Spectral Elements

Efficient solution of global climate models requires effectively handling disparate length and time scales. Implicit solution approaches allow time integration of the physical system with a time step dictated by accuracy of the processes of interest rather than by stability governed by the fastest of the time scales present. Implicit approaches, however, require the solution of nonlinear systems within each time step. Usually, a Newton s method is applied for these systems. Each iteration of the Newton s method, in turn, requires the solution of a linear model of the nonlinear system. This model employs the Jacobian of the problem-defining nonlinear residual, but this Jacobian can be costly to form. If a Krylov linear solver is used for the solution of the linear system, the action of the Jacobian matrix on a given vector is required. In the case of spectral element methods, the Jacobian is not calculated but only implemented through matrix-vector products. The matrix-vector multiply can also be approximated by a finite-difference which may show a loss of accuracy in the overall nonlinear solver. In this paper, we review the advantages and disadvantages of finite-difference approximations of these matrix-vector products for climate dynamics within the spectral-element based shallow-water dynamical-core of the Community Atmosphere Model (CAM).

climate modeling↗