Search NASA⌕ Search

SEARCH · Search NASA

Results for “oxide interfaces”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

Oxide-nitride heteroepitaxy for low-loss dielectrics in superconducting quantum circuits

Superconducting qubits show great promise for the realization of fault-tolerant quantum computing, but lossy, amorphous dielectrics limit current technology. Identifying highly crystalline and stoichiometric dielectrics with intrinsically low microwave loss is therefore a central materials challenge, yet experimentally validated platforms remain scarce. In this work, we integrate a crystalline dielectric into a heteroepitaxial TiN/$γ$-Al$_2$O$_3$/TiN trilayer grown via pulsed laser deposition. Correlative high-resolution imaging, diffraction, and spectroscopy measurements confirm the single-crystal quality and chemical integrity of all layers, with minimal defects and limited anion interdiffusion across the oxide-nitride interfaces. Using microwave lumped-element resonators with parallel-plate capacitors, we report the first direct measurement of the dielectric loss of epitaxial $γ$-Al$_2$O$_3$, for which we find a low intrinsic two-level system loss, $δ_{\text{TLS}}^0 = (2.8 \pm 0.1) \times 10^{-5}$. These results establish heteroepitaxial oxides on transition metal nitrides as an attractive materials platform for superconducting quantum circuits, particularly for integration into compact device architectures such as merged-element transmons and microwave kinetic inductance detectors.

Garcia-Wetten, David A. [Northwestern U.]↗

Study on the Ge{sub 1−x}Sn{sub x}/HfO{sub 2} interface and its impacts on Ge{sub 1−x}Sn{sub x} tunneling transistor

In this paper, we employ first-principle calculation to investigate the Ge{sub 1−x}Sn{sub x}/HfO{sub 2} interface, and then evaluate its impacts on Ge{sub 1−x}Sn{sub x} tunneling field-effect transistor (TFET). First-principle calculations of Ge{sub 1−x}Sn{sub x}/HfO{sub 2} interfaces in the oxygen-rich process atmosphere indicate that the interface states originate from the Ge and Sn dangling bond, rather than Hf-bond. The total density of state shows that there are more interface states in the semiconductor bandgap with increasing Sn fraction. By further incorporating the material and interface parameters from density functional theory calculation into advanced device simulation, the electrical characteristics of Ge{sub 1−x}Sn{sub x} TFET are investigated. Removing the Sn atom from the first atom layer of Ge{sub 1−x}Sn{sub x} in device processes is found to be beneficial to reduce the degradations. For the degradation mechanisms, the trap-assisted-tunneling is the dominant mechanism at the low Sn fraction, and enhanced Shockley-Read-Hall recombination induced by traps becomes the dominant mechanism with increasing Sn fraction. The results are helpful for the interface optimization of Ge{sub 1−x}Sn{sub x} TFET.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of thermal annealing on charge exchange between oxygen interstitial defects within HfO{sub 2} and oxygen-deficient silicon centers within the SiO{sub 2}/Si interface

We compare the charging response of rapid thermally annealed (800 and 1000 deg. C) 4 nm thick HfO{sub 2} to as-deposited HfO{sub 2} on Si by measuring the surface potential of the HfO{sub 2} layers after vacuum ultraviolet (VUV) irradiation with 11.6 eV photons. From VUV spectroscopy, we determined all HfO{sub 2} layers show the presence of oxygen-interstitial defects (OIDs). The electronic states of OID in HfO{sub 2} line up in energy with oxygen-deficient Si centers within the SiO{sub 2} interfacial layer. This implies charge exchange between OIDs within HfO{sub 2} and the O-deficient silicon centers within the SiO{sub 2} interfacial layer are very important for controlling the radiation-induced trapped charge in HfO{sub 2} dielectric stacks.

36 MATERIALS SCIENCE↗

Multilayer interface tracking model of pure tungsten oxidation

Here, we present a numerical model to predict oxide scale growth on tungsten surfaces under exposure to oxygen at high temperatures. The model captures the formation of four thermodynamically-compatible oxide sublayers, WO 2 , WO 2.72 , WO 2.9 , and WO 3 , on top of the metal substrate. Oxide layer growth is simulated by tracking the oxide/oxide and oxide/metal interfaces using a sharp-interface Stefan model coupled to diffusion kinetics. The model is parameterized using selected experimental measurements and electronic structure calculations of the diffusivities of all the oxide subphases involved. We simulate oxide growth at temperatures of 600°C and above, extracting the power law growth exponents in each case, which we find to deviate from classical parabolic growth in several cases. We conduct a comparison of the model predictions with an extensive experimental data set, with reasonable agreement at most temperatures. While many gaps in our understanding still exist, this work is a first attempt at embedding the thermodynamic and kinetic complexity of tungsten oxide growth into a comprehensive mesoscale kinetic model that attempts to capture the essential features of tungsten oxidation to fill existing knowledge gaps and guide and enhance future tungsten oxidation models.

36 MATERIALS SCIENCE↗

In situ atomic-scale imaging of the metal/oxide interfacial transformation

Directly probing structure dynamics at metal/oxide interfaces has been a major challenge due to their buried nature.Using environmental transmission electron microscopy,here we report observations of the in-place formation of Cu 2 O/Cu interfaces via the oxidation of Cu, and subsequently probe the atomic mechanisms by which interfacial transformation and grain rotation occur at the interfaces during reduction in an H 2 gas environment. The Cu 2 O→Cu transformation is observed to occur initially along the Cu 2 O/Cu interface in a layer-by-layer manner.The accumulation of oxygen vacancies at the Cu 2 O/Cu interface drives the collapse of the Cu 2 O lattice near the interface region, which results in a tilted Cu 2 O/Cu interface with concomitant Cu 2 O island rotation. Lastly, these results provide unprecedented microscopic detail regarding the redox reactions of supported oxides,which differs fundamentally from the reduction of bulk or isolated oxides that requires the formation of new interfaces between the parent oxide and the reduced phase.

36 MATERIALS SCIENCE↗

Effect of Si substrate on interfacial SiO{sub 2} scavenging in HfO{sub 2}/SiO{sub 2}/Si stacks

The scavenging kinetics of an ultra-thin SiO{sub 2} interface layer (SiO{sub 2}-IL) in an HfO{sub 2}/SiO{sub 2}/Si stack is discussed by focusing on the substrate effect in addition to oxygen diffusion. {sup 18}O tracing experiments demonstrate that the O-atom moves from the SiO{sub 2}-IL to the HfO{sub 2} layer during scavenging. SiO{sub 2}-IL scavenging with various substrates (Si, SiC, and sapphire) has been found to be significantly different, which suggests that the Si in the substrate is also necessary to continuously cause the scavenging. Based on these findings and thermodynamic considerations, a kinetic model where oxygen vacancy (V{sub O}) transferred from the HfO{sub 2} reacts with the SiO{sub 2}, which is in contact with the Si-substrate, is proposed for the SiO{sub 2}-IL scavenging.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Abnormal bipolar resistive switching behavior in a Pt/GaO{sub 1.3}/Pt structure

A stable and repeatable abnormal bipolar resistive switching behavior was observed in a Pt/GaO{sub 1.3}/Pt sandwich structure without an electroforming process. The low resistance state (LRS) and the high resistance state (HRS) of the device can be distinguished clearly and be switched reversibly under a train of the voltage pulses. The LRS exhibits a conduction of electron tunneling, while the HRS shows a conduction of Schottky-type. The observed phenomena are considered to be related to the migration of oxygen vacancies which changes the space charge region width of the metal/semiconductor interface and results in a different electron transport mechanism.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Influence of post-deposition annealing on interfacial properties between GaN and ZrO{sub 2} grown by atomic layer deposition

Influence of post-deposition annealing on interfacial properties related to the formation/annihilation of interfacial GaO{sub x} layer of ZrO{sub 2} grown by atomic layer deposition (ALD) on GaN is studied. ZrO{sub 2} films were annealed in N{sub 2} atmospheres in temperature range of 300 °C to 700 °C and analyzed by X-ray photoelectron spectroscopy and high-resolution transmission electron microscopy. It has been found that Ga-O bond to Ga-N bond area ratio decreases in the samples annealed at temperatures lower than 500 °C, which could be attributed to the thinning of GaO{sub x} layer associated with low surface defect states due to “clean up” effect of ALD-ZrO{sub 2} on GaN. However, further increase in annealing temperature results in deterioration of interface quality, which is evidenced by increase in Ga-O bond to Ga-N bond area ratio and the reduction of Ga-N binding energy.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Degradation of ZnO-Based Window Layers for Thin-Film CIGS by Accelerated Stress Exposures

The reliability of ZnO-based window layer for CuInGaSe{sub 2} (CIGS) solar cells was investigated. Samples of RF magnetron-sputtered, single-layer intrinsic and Al-doped ZnO and their combined bilayer on glass substrates were exposed in a weatherometer (WOM) and damp heat (DH) conditions with or without acetic acid vapor. Some preliminary samples of single-layer Al-doped Zn{sub 1-x}Mg{sub x}O (ZMO) alloy, a potential replacement for Al:ZnO with a wider bandgap, were also evaluated in the DH. The Al-doped ZnO and ZMO films showed irreversible loss in the conducting properties, free carrier mobility, and characteristic absorption band feature after <500-h DH exposure, with the originally clear transparent films turned into white hazy insulating films and the degradation rate follows the trend of (DH + acetic acid) > DH > WOM. The degradation rate was also reduced by higher film thickness, higher deposition substrate temperature, and dry-out intervals. The results of X-ray diffraction analysis indicate that the ZnO-based films underwent structural degeneration by losing their highly (002) preferential orientation with possible transformation from hexagonal into cubic and formation of Zn(OH){sub 2}. Periodic optical micro-imaging observations suggested a temporal process that involves initial hydrolysis of the oxides at sporadic weak spots, swelling and popping of the hydrolyzed spots due to volume increase, segregation of hydrolyzed regions causing discontinuity of electrical path, hydrolysis of the oxide-glass interface, and finally, formation of insulating oxides/hydroxides with visible delamination over larger areas.

14 SOLAR ENERGY↗

Influence of Ti‐incorporated Zeolite Topology and Pore Condensation on Vapor Phase Propylene Epoxidation Kinetics with Gaseous H 2 O 2

Vapor-phase propylene (C 3 H 6 ) epoxidation kinetics with hydrogen peroxide (H 2 O 2 ) strongly reflects the physical properties of Ti-incorporated zeolite catalysts and the presence of spectating molecules (“solvent”) near active sites even without a bulk liquid phase. Steady-state turnover rates of C 3 H 6 epoxidation and product selectivities vary by orders of magnitudes, depending on the zeolite silanol ((SiOH) x ) density, pore topology (MFI, *BEA, FAU), and the quantity of condensed acetonitrile (CH 3 CN) molecules nearby active sites, under identical reaction mechanisms sharing activated H 2 O 2 intermediates on Ti surfaces. Individual kinetic analyses for propylene oxide (PO) ring-opening, homogeneous diol oxidative cleavage, and homogeneous aldehyde oxidation reveal that secondary reaction kinetics following C 3 H 6 epoxidation responds more sensitively to the changes in zeolite physical properties and pore condensation with CH 3 CN. Thus, higher PO selectivities achieved in hydrophilic Ti-MFI at steady-state reflect the preferential stabilization of transition states for C 3 H 6 epoxidation (a primary reaction) relative to PO ring-opening and oxidative cleavage (secondary reactions) that solvation effects that reflect interactions among condensed CH 3 CN within pores and the extended pore structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Magneto-optical studies of SrGa{sub 0.7} Co{sub 0.3} O{sub 3−δ} perovskite thin films with embedded cobalt nanoparticles

Sr(Ga{sub 0.7} Co{sub 0.3})O{sub 3−δ}/Co perovskite/metal thin films have been systematically studied by means of Faraday and Kerr magneto-optical spectroscopies. The samples were prepared by pulsed laser deposition on (001) (LaAlO{sub 3}) {sub 0.3}(Sr{sub 2}AlTaO{sub 6}) {sub 0.7} (LSAT) and Si substrates, and grew as a perovskite matrix containing approximately 6% by volume of embedded metallic Co nanoparticles with diameter less than 20 nm, which were distributed throughout the film and at the film-substrate interface. The film thickness ranged from 130 to 310 nm. The perovskite matrix was single crystal on LSAT and polycrystalline on Si. The magneto-optical spectroscopy was carried out in both Faraday and Kerr configurations in the photon energy range from 0.5 to 5 eV in magnetic fields sufficient for sample saturation, showing a strong thickness dependence of the magneto-optical effect. This dependence was attributed to the different metallic Co content, nanoparticle size, and accumulation at the film-substrate interface.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Water dissociation at the water–rutile TiO 2 (110) interface from ab initio-based deep neural network simulations

The interaction of water with TiO 2 surfaces is of crucial importance in various scientific fields and applications, from photocatalysis for hydrogen production and the photooxidation of organic pollutants to self-cleaning surfaces and bio-medical devices. In particular, the equilibrium fraction of water dissociation at the TiO 2 –water interface has a critical role in the surface chemistry of TiO 2 , but is difficult to determine both experimentally and computationally. Among TiO 2 surfaces, rutile TiO 2 (110) is of special interest as the most abundant surface of TiO 2 ’s stable rutile phase. While surface-science studies have provided detailed information on the interaction of rutile TiO 2 (110) with gas-phase water, much less is known about the TiO 2 (110)–water interface, which is more relevant to many applications. In this work, we characterize the structure of the aqueous TiO 2 (110) interface using nanosecond timescale molecular dynamics simulations with ab initio-based deep neural network potentials that accurately describe water/TiO 2 (110) interactions over a wide range of water coverages. Simulations on TiO 2 (110) slab models of increasing thickness provide insight into the dynamic equilibrium between molecular and dissociated adsorbed water at the interface and allow us to obtain a reliable estimate of the equilibrium fraction of water dissociation. We find a dissociation fraction of 22 ± 6% with an associated average hydroxyl lifetime of 7.6 ± 1.8 ns. These quantities are both much larger than corresponding estimates for the aqueous anatase TiO 2 (101) interface, consistent with the higher water photooxidation activity that is observed for rutile relative to anatase.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ab Initio Insights to Metal Passivation: Diffusion and Defect Formation in Amorphous Zirconia and Alumina

Metal passivation refers to the formation of protective oxide films on metals, which shield them from further corrosion and oxidation, playing a crucial role in maintaining their stability. The mesoscopic Point Defect Model has successfully predicted passivity as a steady state process where oxide growth from oxygen vacancies at the metal/film interface competes with oxide dissolution at the film/environment interface. In this work, informed by the Point Defect Model parameters, we use first-principles calculations to calculate defect formation and atomic diffusion in amorphous materials and correlate these descriptors with the behavior and growth of the oxide film. Focusing on amorphous zirconia and alumina, we demonstrate that defect formation energies exhibit significant variability in amorphous systems. In alumina, vacancies dominate, with cation and anion vacancies occurring at comparable concentrations. Diffusion calculations for stoichiometric amorphous alumina and zirconia, as well as oxygen-deficient zirconia, reveal faster diffusion in the oxygen-deficient case, highlighting the impact of defects on transport. Comparison of calculated self-diffusion coefficients for the dominant defect species with experimentally measured oxide thicknesses shows a clear correlation, suggesting that first-principles-derived diffusivity information can serve as a key descriptor for surface passivation film growth.

Farnell, Mackinzie S. [University of California, B↗

Direct band gap optical emission from Ge islands grown on relaxed Si{sub 0.5}Ge{sub 0.5}/Si (100) substrate

Strained Ge islands have been grown on fully relaxed Si{sub 0.5}Ge{sub 0.5} substrate by pulsed laser ablation technique. The formation of strained Ge islands has been found for film with higher thickness following Stranski–Krastanov growth mechanism. The variation of strain with changing Ge layer thickness has been analyzed using Raman spectroscopy and high-resolution X-ray diffraction techniques. X-ray photoelectron spectra have shown the absence of any Si-Ge intermixing and oxidation of Ge films. A strong no-phonon photoluminescence emission from Ge islands has been observed, showing the superior optical characteristics of the islands grown on relaxed substrate.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Coupling of Er light emissions to plasmon modes on In{sub 2}O{sub 3}: Sn nanoparticle sheets in the near-infrared range

Near-infrared Er photoluminescence (PL) is markedly modified using a plasmonic In{sub 2}O{sub 3}: Sn nanoparticle (NP) sheet. Modeling and optical measurements reveal the presence of different electric fields (E-field) in the NP sheet. The local E-field excited at the interface between the NP sheet and Er-emitting layer of ZnO contributes significantly towards the spectral modifications of Er PL due to matching with the photon energy of Er PL. We also determine the critical temperature for Er PL modifications, which is related to the energy transfer efficiency between Er transition dipoles in ZnO and the plasmon modes on the NP sheet.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Atomic-Scale Interface for Pt Nanoparticles on SrTiO 3 (001)

The interfacial structure formed by Pt nanoparticles grown epitaxially on a SrTiO 3 (001) surface by pulsed laser deposition was studied by X-ray standing-wave (XSW) excited core-level photoelectron emission. The XSW-generated 3D atomic map of the Pt and interfacial oxygens for the oxidized Pt/SrTiO 3 interface differs significantly from that of the as-deposited interface. After oxidation, the Pt atoms shifted upward and their atomic occupation at fcc-like sites evolved as the oxidation temperature increased. Interfacial oxygen atoms were differentiated from bulk O atoms by the chemical shift in the binding energy of their 1s electrons. After oxidation, the interfacial oxygen atoms rearranged to form a TiO 2 bilayer at the interface. Furthermore, these results provide a more complete description of the strong metal–support interaction process at the interface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Oxidation State of the XRCC1 N-terminal Domain Regulates DNA Polymerase Beta Binding Affinity

Formation of a complex between the XRCC1 N-terminal domain (NTD) and DNA polymerase {beta} (Pol {beta}) is central to base excision repair of damaged DNA. Two crystal forms of XRCC1-NTD complexed with Pol {beta} have been solved, revealing that the XRCC1-NTD is able to adopt a redox-dependent alternate fold, characterized by a disulfide bond, and substantial variations of secondary structure, folding topology, and electrostatic surface. Although most of these structural changes occur distal to the interface, the oxidized XRCC1-NTD forms additional interactions with Pol {beta}, enhancing affinity by an order of magnitude. Transient disulfide bond formation is increasingly recognized as an important molecular regulatory mechanism. The results presented here suggest a paradigm in DNA repair in which the redox state of a scaffolding protein plays an active role in organizing the repair complex.

59 BASIC BIOLOGICAL SCIENCES↗