Search NASA⌕ Search

SEARCH · Search NASA

Results for “parallel planes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39
All sourcesNASA NTRSDOE OSTI
NASA NTRS2001

Growth of Defect-Free 3C-SiC on 4H- and 6H-SiC Mesas Using Step-Free Surface Heteroepitaxy

A new growth process, herein named step-free surface heteroepitaxy, has achieved 3CSiC films completely free of double positioning boundaries and stacking faults on 4H-SiC and 6H-SiC substrate mesas. The process is based upon the initial 2-dimensional nucleation and lateral expansion of a single island of 3C-SiC on a 4H- or 6H-SiC mesa surface that is completely free of bilayer surface steps. Our experimental results indicate that substrate-epilayer in-plane lattice mismatch (delta a/a = 0.0854% for 3C/4H) is at least partially relieved parallel to the interface in the initial bilayers of the heterofilm, producing an at least partially relaxed 3C-SiC film without dislocations that undesirably thread through the thickness of the epilayer. This result should enable realization of improved 3C-SiC devices.

Neudeck, Philip G.↗
NASA NTRS1992

Three-dimensional structure of coronal mass ejections

The 3D structure of coronal mass ejections (CMEs) are examined on the basis of numerical solutions of the MHD equations. The numerical solution in a meridional plane centered over the region of newly emerged flux has features similar to those computed in previous 2D simulations. The CME is found to be shaped more like an arcade with an axis parallel to the Equator than like a bubble. This characteristic arcade shape occurs both in the density distribution in meridional and azimuthal planes and in the integrated white-light brightness in meridional and polar views. Examination of the brightness change due to the CME shows that the CME in a meridional projection as viewed from the earth has the same loop shape even if the CME originates almost directly in front of or behind the sun.

Steinolfson, R. S.↗
NASA NTRS1980

SPAR and ASTP studies of plane-front solidification and magnetic properties of Bi/MnBi

Eutectic and off-eutectic Bi/MnBi compositions have been directionally solidified parallel, anti-parallel and perpendicular to the gravity vector in a one-g environment and in low-gravity during the ASTP flight. MnBi rod diameter and interparticle spacing distributions are similar for all gravity vector orientations when grown at high solidification rates in one-g. Previously reported ASTP results are explained by the existence of a metastable magnetic phase and off-eutectic solidification models.

Pirich, R. G.↗
NASA NTRS1988

The structure and dynamics of reacting plane mixing layers

Experimental studies of the combusting mixing layers formed over a rearward facing step and between two parallel streams are reported. The steady behavior of the mean properties of the reacting flows is similar to that of nonreacting flows except for the global effects of thermodynamic property changes. Vortices form by the two-dimensional K-H instability and grow by subharmonic combination until the layer begins to interact with the walls. Unsteady behavior occurs when there are resonator interactions with the K-H instability or the instability associated with the recirculation vortex in the rearward facing step flow.

Keller, J. O.↗
NASA NTRS1978

Characterization of acoustic disturbances in linearly sheared flows

The equation describing the plane wave propagation, the stability, or the rectangular duct mode characteristics in a compressible inviscid linearly sheared parallel, but otherwise homogeneous flow, is shown to be reducible to Whittaker's equation. The resulting solutions, which are real, viewed as functions of two variables, depend on a parameter and an argument, the values of which have precise physical meanings depending on the problem. The exact solutions in terms of Whittaker functions are used to obtain a number of known results of plane wave propagation and stability in linearly sheared flows as limiting cases in which the speed of sound goes to infinity (incompressible limit) or the shear layer thickness, or wave number, goes to zero (vortex sheet limit). The usefulness of the exact solutions is then discussed in connection with the problems of plane wave propagation and the stability of a finite thickness layer with a linear velocity profile.

Koutsoyannis, S. P.↗
NASA NTRS1986

Propagation of sound waves in tubes of noncircular cross section

Plane-acoustic-wave propagation in small tubes with a cross section in the shape of a flattened oval is described. Theoretical descriptions of a plane wave propagating in a tube with circular cross section and between a pair of infinite parallel plates, including viscous and thermal damping, are expressed in similar form. For a wide range of useful duct sizes, the propagation constant (whose real and imaginary parts are the amplitude attenuation rate and the wave number, respectively) is very nearly the same function of frequency for both cases if the radius of the circular tube is the same as the distance between the parallel plates. This suggests that either a circular-cross-section model or a flat-plate model can be used to calculate wave propagation in flat-oval tubing, or any other shape tubing, if its size is expressed in terms of an equivalent radius, given by g = 2 x (cross-sectional area)/(length of perimeter). Measurements of the frequency response of two sections of flat-oval tubing agree with calculations based on this idea. Flat-plate formulas are derived, the use of transmission-line matrices for calculations of plane waves in compound systems of ducts is described, and examples of computer programs written to carry out the calculations are shown.

Richards, W. B.↗
NASA NTRS1988

Laminate behavior for SiC fiber-reinforced reaction-bonded silicon nitride matrix composites

The room temperature mechanical properties of SiC fiber reinforced reaction-bonded silicon nitride matrix composite laminates (SiC/RBSN) have been measured. The laminates contained approx 30 volume fraction of aligned 142-micron diameter SiC fiber in a porous RBSN matrix. Three types of laminate studied were unidirectional: (1) (0) sub 8, (2) (10) sub 8, and (3) (45) sub 8, and (90) sub 8; cross plied laminates (0 sub 2/90 sub 2); and angle plied laminates: (+45 sub 2/-45 sub 2). Each laminate contained eight fiber plies. Results of the unidirectionally reinforced composites tested at various angles to the reinforcement direction indicate large anisotropy in in-plane properties. In addition, strength properties of these composites along the fiber direction were independent of specimen gage length and were unaffected by notches normal to the fiber direction. Splitting parallel to the fiber at the notch tip appears to be the dominant crack blunting mechanism responsible for notch insensitive behavior of these composites. In-plane properties of the composites can be improved by 2-D laminate construction. Mechanical property results for (0 sub 2/90 sub 2)sub s and (+45/-45 sub 2) sub s laminates showed that their matrix failure strains were similar to that for (0) sub 8 laminates, but their primary elastic moduli, matrix cracking strengths, and ultimate composite strengths were lower. The elastic properties of unidirectional, cross-ply, and angle-ply composites can be predicted from modified constitutive equations and laminate theory. Further improvements in laminate properties may be achieved by reducing the matrix porosity and by optimizing the bond strength between the SiC fiber and RBSN matrix.

Rhatt, R. T.↗
NASA NTRS1990

Laminate behavior for SiC fiber-reinforced reaction-bonded silicon nitride matrix composites

The room temperature mechanical properties of SiC fiber reinforced reaction-bonded silicon nitride matrix composite laminates (SiC/RBSN) have been measured. The laminates contained approx 30 volume fraction of aligned 142-micron diameter SiC fiber in a porous RBSN matrix. Three types of laminate studied were unidirectional: (1) (0) sub 8, (2) (10) sub 8, and (3) (45) sub 8, and (90) sub 8; cross plied laminates (0 sub 2/90 sub 2); and angle plied laminates: (+45 sub 2/-45 sub 2). Each laminate contained eight fiber plies. Results of the unidirectionally reinforced composites tested at various angles to the reinforcement direction indicate large anisotropy in in-plane properties. In addition, strength properties of these composites along the fiber direction were independent of specimen gage length and were unaffected by notches normal to the fiber direction. Splitting parallel to the fiber at the notch tip appears to be the dominant crack blunting mechanism responsible for notch insensitive behavior of these composites. In-plane properties of the composites can be improved by 2-D laminate construction. Mechanical property results for (0 sub 2/90 sub 2) sub s and (+45/-45 sub 2) sub s laminates showed that their matrix failure strains were similar to that for (0) sub 8 laminates, but their primary elastic moduli, matrix cracking strengths, and ultimate composite strengths were lower. The elastic properties of unidirectional, cross-ply, and angle-ply composites can be predicted from modified constitutive equations and laminate theory. Further improvements in laminate properties may be achieved by reducing the matrix porosity and by optimizing the bond strength between the SiC fiber and RBSN matrix.

Bhatt, Ramakrishna T.↗
NASA NTRS1994

Approaches and Analysis for On-Focal-Plane Analog-to-Digital Conversion

This paper presents approaches for on-focal-plane analog-to-digital conversion (ADC). Common approaches and architectures for ADC and their utility for on-focal-plane integration are discussed. Candidate approaches are analyzed with respect to required amplifier gain, bandwidth, capacitance matching, noise and offsets as a function of ADC resolution. A column-parallel ADC architecture appears to be an effective compromise of chip area, power, circuit speed and ADC resolution. The discussion is valid for both infrared focal-plane arrays (FPAs) and visible image sensors.

analog-to-digital↗
NASA NTRS1972

A general purpose wideband optical spatial frequency spectrum analyzer

The light scattered at various angles by a transparent media is studied. An example of these applications is the optical Fourier spectrum measurement resulting from various spatial frequencies which were recorded on a photographic emulsion. A method for obtaining these measurements consists of illuminating the test object with parallel monochromatic light. A stationary lens, placed in the resulting wavefield at a distance of one focal length from the object, will focus parallel waves emanating from the test object at a point lying in the focal plane of the lens. A light detector with a small filtering aperture is then used to measure the intensity variation of the light in the focal or transform plane of the lens. Such measurements require the use of a lens which is highly corrected for all of the common aberrations except chromatic aberration.

Ballard, G. S.↗
NASA NTRS1976

Relativistic nonlinear plasma waves in a magnetic field

An investigation is conducted of five relativistic plane nonlinear waves, taking into account circularly polarized waves and electrostatic plasma oscillations propagating parallel to the magnetic field, relativistic Alfven waves, linearly polarized transverse waves propagating in zero magnetic field, and the relativistic analog of the extraordinary mode propagating at an arbitrary angle to the magnetic field. It is found that a large-amplitude superluminous wave determines the average plasma properties, and not vice versa. Attention is given to the implications of the obtained results for the acceleration of cosmic rays in pulsar magnetospheres.

Kennel, C. F.↗
NASA NTRS1981

The Solarex Block IV module

Several innovative concepts were introduced for the Block IV contract. Semicrystalline silicon manufactured by SEMIX Inc. is the basic cell material. A front metallization pattern combined with a wraparound-style interconnect and in-plane stress relief combine to provide a new method to reliably accomplish series-paralleling. Laminated modules using Ethylene Vinyl Acetate (EVA) as the encapsulant were manufactured for the first time.

Hoelscher, J. F.↗
NASA NTRS1986

Star of Condor - A strontium critical velocity experiment, Peru, 1983

'Star of Condor' was a critical velocity experiment using Sr vapor produced in a radial shaped charge, which was carried to 571.11 km altitude on a Taurus-Tomahawk rocket launched from Punto Lobos, Peru, and detonated in the plane of the magnetic field lines so that all ranges of pitch angles from parallel to B to perpendicular to B were covered. Sr has a critical velocity of 3.3 km/s, and from observation, 42.5 percent of the neutral Sr gas had a velocity component perpendicular to B exceeding that value. No Sr ion emissions were detected shortly after the burst with usual TV integration times. However, about 10 min after the detonation a faint field-aligned streak was discovered with long TV integration times. The brightness is estimated as 5 R, which, combined with the streak geometry, implies an ion production of 2.4 x 10 to the 19th ions. This is only 0.0036 percent ionization of the Sr vapor. All the ions could easily have been produced by thermal ionization from the original detonation thermal distribution. The breakup of the Sr gas into small bloblike structures may have allowed the high-energy electrons to escape before an ionization cascade could be produced. For whatever reason, the Alfven mechanism proposed for space plasmas in the absence of laboratory walls did not produce an ionization cascade in the experiment.

Wescott, E. M.↗
NASA NTRS1992

Verification measurement of a polarization Raman elastic-backscatter lidar

By measuring the depolarization of light Raman scattered from a gas of known number density (nitrogen), it is possible to determine the influence of multiple scattering on lidar signals. In order to realize such measurements, linearly polarized laser light is emitted and two components of the nitrogen Raman signals, with E vectors parallel (parallel P sub lambda R) and perpendicular (perpendicular P sub lambda R) to the plane of polarization of the laser light, are measured. The depolarization ratio, delta sub lambda R = perpendicular P sub lambda R/parallel P sub lambda R, is constant if only the Raman scattering process contributes to the signal. Any variation of the depolarization is caused by additional elastic, and, thus, multiple scattering. If the contribution of multiple scattered light to the lidar signals is known, other parameters determined with the systems such as extinction, backscattering, and the depolarization of elastically scattered light, can be corrected for this influence. The lidar system used for the polarization measurements, especially the receiver setup, is described. The calibration of the apparatus and a clear air measurement are discussed.

Schulze, Christoph↗
NASA NTRS1993

Seasonal variation in the structure of red reflectance of leaves from yellow poplar, red oak, and red maple

The light scattered from leaves was measured as a function of view angle in the principal plane for yellow poplar, red oak, and red maple. The source was a parallel-polarized helium-neon laser. Yellow poplar leaves had the highest reflectance of the three species, which may have been due to its shorter palisade cells and more extensive spongy mesophyll. Prior to senescence, there was a significant decrease, but not total extinction, in the reflectance of the beam incident at 60 deg from nadir on the adaxial side of the leaves of all three species. Low-temperature SEM observations showed differences in the surface wax patterns among the three species but did not indicate a cause of the reflectance changes other than possibly the accumulation and aging of the wax.

Brakke, Thomas W.↗
NASA NTRS1994

Time-dependent simulation of cosmic-ray shocks, including Alfven transport

Time evolution of plane, cosmic-ray modified shocks has been simulated numerically for the case with parallel magnetic fields. Computations were done in a 'three-fluid' dynamical model incorporating cosmic-ray and Alfven-wave energy transport equations. Nonlinear feedback from the cosmic rays and Alfven waves is included in the equation of motion for the underlying plasma, as is the finite propagation speed and energy dissipation of the Alfven waves. Exploratory results confirm earlier, steady state analyses that found these Alfven transport effects to be potentially important when the upstream Alfven speed and gas sound speeds are comparable. As noted earlier, Alfven transport effects tend to reduce the transfer of energy through a shock from gas to energetic particles. These studies show as well that the timescale for modification of the shock is altered in nonlinear ways. It is clear, however, that the consequences of Alfven transport are strongly model dependent and that both advection of cosmic rays by the waves and dissipation of wave energy in the plasma will be important to model correctly when quantitative results are needed. Comparison is made between simulations based on a constant diffusion coefficient and more realistic diffusion models allowing the diffusion coefficient to vary in response to changes in Alfven wave intensity. No really substantive differences were found between them.

Jones, T. W.↗
NASA NTRS1973

The relativistic dynamics of a point charge in the field of a plane electromagnetic wave traveling in the direction of a uniform static magnetic field

The motion of a charged particle in electromagnetic fields of various geometric configurations and arising from a variety of sources is of intrinsic interest in electromagnetic theory. The particular configuration consisting of a plane wave propagating in the presence of a static uniform magnetic field whose direction is parallel to the wave normal is examined. The analysis presented here is treated within the context of classical electromagnetic theory. A numerical solution - at least to the approximate Lorentz-Dirac equation - is obtained.

Mitchell, T. P.↗