Search NASA⌕ Search

SEARCH · Search NASA

Results for “phase stability modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

Size-dependent stability toward dissociation and ligand binding energies of phosphine-ligated gold cluster ions

The stability of sub-nanometer size gold clusters ligated with organic molecules is of paramount importance to the scalable synthesis of monodisperse size-selected metal clusters with highly tunable chemical and physical properties. For the first time, a Fourier transform ion cyclotron resonance mass spectrometer (FT-ICR-MS) equipped with surface induced dissociation (SID) has been employed to investigate the time and collision energy resolved fragmentation behavior of cationic doubly charged gold clusters containing 7-9 gold atoms and 6-7 triphenylphosphine (TPP) ligands prepared by reduction synthesis in solution. The TPP ligated gold clusters are demonstrated to fragment through three primary dissociation pathways: (1) Loss of a neutral TPP ligand from the precursor gold cluster, (2) asymmetric fission and (3) symmetric fission and charge separation of the gold core resulting in formation of complementary pairs of singly charged fragment ions. Threshold energies and activation entropies of these fragmentation pathways have been determined employing Rice-Ramsperger-Kassel-Marcus (RRKM) modeling of the experimental SID data. It is demonstrated that the doubly charged cluster ion containing eight gold atoms and six TPP ligands, (8,6)2+, exhibits exceptional stability compared to the other cationic gold clusters examined in this study due to its large ligand binding energy of 1.76 eV. Our findings demonstrate the dramatic effect of the size and extent of ligation on the gas-phase stability and preferred fragmentation pathways of small TPP-ligated gold clusters.

Environmental Molecular Sciences Laboratory↗

Anharmonic stabilization and lattice heat transport in rocksalt β -GeTe

Peierls-Boltzmann transport equation, coupled with third-order anharmonic lattice dynamics calculations, has been widely used to model lattice thermal conductivity (κ l ) in bulk crystals. However, its application to materials with structural phase transition at relatively high temperature is fundamentally challenged by the presence of lattice instabilities (imaginary phonon modes). Additionally, its accuracy suffers from the absence of higher-than-third-order phonon scattering processes, which are important near/above the Debye temperature. In this letter, we present an effective scheme that combines temperature-induced anharmonic phonon renormalization and four-phonon scattering to resolve these two theoretical challenges. Here, we apply this scheme to investigate the lattice dynamics and thermal transport properties of GeTe, which undergoes a second-order ferroelectric phase transition from rhombohedral α-GeTe to rocksalt β-GeTe at about 700 K. Our results on the high-temperature phase β-GeTe at 800 K confirm the stabilization of β-GeTe by temperature effects. We find that considering only three-phonon scattering leads to significantly overestimated κ l of 3.8 W/mK at 800 K, whereas including four-phonon scattering reduces κ l to 1.7 W/mK, a value comparable with experiments. To explore the possibility to further suppress κ l , we show that alloying β-GeTe with heavy cations such as Pb and Bi can effectively reduce κ l to about 1.0 W/mK, whereas particle size needs to be around 10 nm through nanostructuring to achieve a comparable reduction in κ l .

36 MATERIALS SCIENCE↗

Wake Vortex Effects Between Urban Air Mobility Aircraft

This study models the wake-induced downwash of an Urban Air Mobility (UAM) aircraft and the wake’s effects on a trailing aircraft’s dynamic stability when intersecting the wake trail. The Proctor wake vortex model is used to compute the wake-induced downwash over a 0.8 × 0.8 nautical mile flight area. The model is complemented by core radius growth, Proctor single phase wake decay, wake propagation, and Lamb wake aging. The wake data is then stored and loaded to the trailing aircraft as an atmospheric condition to affect the dynamics. Preliminary simulations include modeling the downwash from multiple UAM aircraft over the flight area and determining the normalized wake reduction at the ICAO 5 nautical mile separation criteria for a LIGHT aircraft trailing a MEDIUM aircraft.

Wake Vortex↗

Radiative Transfer, Non-transparency, Stability Against Quench in Superconductors and Their Correlations

Radiative transfer calculations are presented for multi-filamentary BSCCO 2212 and 2223 and for thin film-coated YBaCuO 123 superconductors. A strictly radiative view allows conductor morphology of these superconductors to be interpreted as particulate or quasi-particulate objects. Problems then arising from non-regular particle shape, missing refractive indices, dependent scattering and superconductor material (diamagnetic) properties are solved in a multi-step, approximation approach. Both types of conductors are shown to be non-transparent to mid-IR radiation. Non-transparency may become critical for superconductor stability. The obtained extinction cross sections converge near the phase transition. A substantial difference of extinction properties between the superconducting and normal conducting state thus cannot be observed. As a first corollary from non-transparency, application of the additive approximation for the total thermal conductivity used in previous numerical calculations of the BSCCO and YBaCuO superconductors is confirmed. Second, within transit time intervals, the length of which depends on optical thickness, no uniform equilibrium conditions of electron pair density within the conductor cross section and near critical temperature are observed. Phase transition does not proceed uniformly, neither spatial nor temporal, and the order (succession on time scales) of local events (temperature variations, quench), in extreme cases, is completely dissolved. As another corollary, non-transparency even makes the existence of uniquely defined, physical time scales doubtful in a superconductor. The obtained results are expected to improve existing stability models and will be of practical value for future materials development.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Two-stage orbital order and dynamical spin frustration in KCuF3

The orbital degree of freedom is integral to many exotic phenomenain condensed matter, including colossal magnetoresistance and unconventional superconductivity. The standard model of orbital physics is the Kugel–Khomskii model, which first explained the symmetry of orbital and magnetic order in KCuF 3 and has since been applied to virtually all orbitally active materials. Here we present Raman and X-ray scattering measurements showing that KCuF 3 exhibits a previously unidentified structural phase transition at T=50 K, involving rotations of the CuF 6 octahedra. These rotations are quasi-ordered and exhibit glassy hysteresis, but serve to stabilize Néel spin order at T=39 K. Here, we propose an explanation for these effects by supplementing the Kugel–Khomskii model with a direct, orbital exchange term that is driven by a combination of electron–electron interactions and ligand distortions. The effect of this term is to create a near degeneracy that dynamically frustrates the spin subsystem but is lifted at low temperature by subdominant, orbital–lattice interactions. Our results suggest that direct orbital exchange may be crucial for the physics of many orbitally active materials, including manganites, ruthenates and the iron pnictides.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Using a Chromatographic Pseudophase Model To Elucidate the Mechanism of Olefin Separation by Silver(I) Ions in Ionic Liquids

Silver(I) ions undergo selective olefin complexation and have been utilized in various olefin/paraffin separation techniques such as argentation chromatography and facilitated transport membranes. Ionic liquids (ILs) are solvents known for their low vapor pressure, high thermal stability, low melting points, and ability to promote a favorable solvation environment for silver(I) ion–olefin interactions. To develop highly selective separation systems, a fundamental understanding of analyte partitioning to the stationary phase and the thermodynamic driving forces behind solvation is required. In this study, a chromatographic model treating silver(I) ions as a pseudophase is constructed and employed for the first time to investigate the olefin separation mechanism in silver(I) salt/IL mixtures. Stationary phases containing varying amounts of noncoordinated silver(I) salt ([Ag + ][NTf 2 – ]) dissolved in the 1-decyl-3-methylimidazolium bis[(trifluoromethyl)sulfonyl]imide ([C 10 MIM + ][NTf 2 – ]) IL are utilized to determine the partition coefficients of various analytes including alkanes, alkenes, alkynes, aromatics, aldehyde, esters, and ketones. As ligand coordination to silver(I) ions is known to lower its olefin complexation capability, this study also examines two different types of coordinated silver(I) ion pseudophases, namely, monocoordinated silver(I) salt ([Ag + (1-decyl-2-methylimidazole, DMIM)][NTf 2 – ]) and dicoordinated silver(I) salt ([Ag + (1-methylimidazole, MIM)(DMIM)][NTf 2 – ]). The extent of olefin partitioning to the coordinated silver(I) ion pseudophases over the carrier gas and IL decreased by up to two orders of magnitude. Values for enthalpy, entropy, and free energy of solvation were determined for the three silver(I) ion-containing systems. Olefin retention was observed to be enthalpically dominated, while ligand coordination to the silver(I) ion pseudophase resulted in variations for both enthalpic and entropic contributions to the free energy of solvation. Furthermore, the developed model can be used to study chemical changes that occur in silver(I) ions over time as well as identify optimal silver(I) salt/IL mixtures that yield high olefin selectivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Next-Generation Analysis and Visualization Platform for Manufacturing and Engineering Workflows (Final Report)

Advanced manufacturing and engineering are fundamental to the economic strength and national security of the United States. With the introduction of advanced modeling and simulation practices in manufacturing and engineering over the last several decades, we are producing better products, more quickly, and at decreased cost. Through the adoption of high-performance computing (HPC) enabled workflows, in small- to medium-sized manufacturers and engineering firms, which employ fewer than 500 people, is renewing United States manufacturing and engineering. Despite successes, there are significant barriers to widespread adoption of these tools. Our Phase I SBIR project, Next-Generation Analysis and Visualization Platform for Manufacturing and Engineering Workflows, aims to address several of these barriers. Our project helped us evaluate the feasibility and benefits and mitigate risks of asynchronous processing for analysis and visualization workflows. We evaluated the impact of asynchronous, non-blocking communication can have on the user experience in a complex visualization application. Besides the impact on users, we wanted to understand the impacts on developers (development application programming interfaces (APIs))and generated applications (robustness and stability). Any asynchronous platform implementation is bound to rely on multiple threads which can make the programming model extraordinarily complex and prone to bugs. If not managed carefully, the complexity and resulting instability would be an unacceptable evolution for widely used production tools like ParaView and putting the success of the Phase II project at risk.

42 ENGINEERING↗

Gyrokinetic simulation of global and local Alfvén eigenmodes driven by energetic particles in a DIII-D discharge

The unstable spectrum of Alfvén eigenmodes (AEs) driven by neutral beam-sourced energetic particles (EPs) in a benchmark DIII-D discharge (142111) is calculated in a fully gyrokinetic model using the GYRO code's massively parallel linear eigenvalue solver. One cycle of the slow (equilibrium scale) frequency sweep of the reverse shear Alfvén eigenmode (RSAE) at toroidal mode number n=3 is mapped. The RSAE second harmonic and an unstable beta-induced Alfvén eigenmode (BAE) are simultaneously tracked alongside the primary RSAE. An observed twist in the eigenmode pattern, caused mostly by shear in the driving EP profile, is shown through artificially varying the E×B rotational velocity shear to depend generally on shear in the local wave phase velocity. Coupling to the BAE and to the toroidal Alfvén eigenmode limit the RSAE frequency sweeps at the lower and upper end, respectively. While the present fully gyrokinetic model (including thermal ions and electrons) constitutes the best treatment of compressibility physics available, the BAE frequency is overpredicted by about 20% against experiment here and is found to be sensitive to energetic beam ion pressure. The RSAE frequency is more accurately matched except when it is limited by the BAE. Simulations suggest that the experiment is very close to marginal AE stability at points of RSAE-BAE coupling. A recipe for comparing the radial profile of quasilinear transport flux from local modes to that from global modes paves the way for the development of a stiff (critical gradient) local AE transport model based on local mode stability thresholds.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Crystal defects and related stress in Y{sub 2}O{sub 3} thin films: Origin, modeling, and consequence on the stability of the C-type structure

We study the impact that the crystal defects have on the C-type structure of rare earth sesquioxide thin films grown by ion-beam sputtering, through the example of Y{sub 2}O{sub 3}. By monitoring the energy of the argon beam used in the sputter deposition process (between 600 and 1200 eV), we show that it is possible to control the microstructure (defects concentration, stress state and phase) in the oxide layer. Two main types of defects, ascribed to the 'atomic peening effect', are evidenced by high-resolution transmission electron microscopy, Rutherford backscattering spectroscopy, and nuclear reaction analysis experiments: anti-Frenkel pairs, leading to a disorder on the oxygen-vacancy network, and oxygen-vacancy dislocations loops, to accommodate the strong nonstoichiometry. From a macroscopic measurement of the residual stresses in the as-deposited and the annealed layers, through x-ray diffraction and the sin{sup 2}{Psi} method, we have modeled the related stress state using an enhanced triaxial stress model. In the as-grown films, we evidence the coexistence of a biaxial and a hydrostatic stress, due to inclusions of atomic size defects. Quantitative information of the concentration and the nature of each type of defect (size effect) have also been determined, in good agreement with experiments. Interestingly, in the most energetic growth conditions corresponding to the highest degree of disorder on the oxygen-vacancy network and to the highest stress field in the film, we demonstrate that it is possible to stabilize an unexpected and metastable non equilibrium fluorite-like phase (X-type).

36 MATERIALS SCIENCE↗

The Interplay of Nonlinearity and Architecture in Equilibrium Cytoskeletal Mechanics

The interplay between cytoskeletal architecture and the nonlinearity of the interactions due to bucklable filaments plays a key role in modulating the cell's mechanical stability and affecting its structural rearrangements. We study a model of cytoskeletal structure treating it as an amorphous network of hard centers rigidly cross-linked by nonlinear elastic strings, neglecting the effects of motorization. Using simulations along with a self-consistent phonon method, we show that this minimal model exhibits diverse thermodynamically stable mechanical phases that depend on excluded volume, cross-link concentration, filament length, and stiffness. Within the framework set by the free energy functional formulation and making use of the random first order transition theory of structural glasses, we further estimate the characteristic densities for a kinetic glass transition to occur in this model system. Network connectivity strongly modulates the transition boundaries between various equilibrium phases, as well as the kinetic glass transition density.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

A field-induced ferrielectric liquid crystal phase

Understanding the structures and stability conditions of emerging liquid crystal (LC) phases brings us a step closer to the crucial understanding of delicate self-assembling nanoscale systems and the consequential impact on their macroscopic properties. We report experimental evidence and a theoretical model for a ferrielectric LC phase which has a three-layer repeat structure and is field-induced but exhibits a symmetry and electro-optical properties that are distinct from those of the known ferrielectric (SmC{sub FI1}) phase. This discovery has implications for the ways in which LC phases are identified, and offers the potential for better control of ferroelectric LC devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Complexes of tubulin oligomers and tau form a viscoelastic intervening network cross-bridging microtubules into bundles

Abstract The axon-initial-segment (AIS) of mature neurons contains microtubule (MT) fascicles (linear bundles) implicated as retrograde diffusion barriers in the retention of MT-associated protein (MAP) tau inside axons. Tau dysfunction and leakage outside of the axon is associated with neurodegeneration. We report on the structure of steady-state MT bundles in varying concentrations of Mg 2+ or Ca 2+ divalent cations in mixtures containing αβ-tubulin, full-length tau, and GTP at 37 °C in a physiological buffer. A concentration-time kinetic phase diagram generated by synchrotron SAXS reveals a wide-spacing MT bundle phase (B ws ), a transient intermediate MT bundle phase (B int ), and a tubulin ring phase. SAXS with TEM of plastic-embedded samples provides evidence of a viscoelastic intervening network (IN) of complexes of tubulin oligomers and tau stabilizing MT bundles. In this model, αβ-tubulin oligomers in the IN are crosslinked by tau’s MT binding repeats, which also link αβ-tubulin oligomers to αβ-tubulin within the MT lattice. The model challenges whether the cross-bridging of MTs is attributed entirely to MAPs. Tubulin-tau complexes in the IN or bound to isolated MTs are potential sites for enzymatic modification of tau, promoting nucleation and growth of tau fibrils in tauopathies.

59 BASIC BIOLOGICAL SCIENCES↗

Computational Design of Cost-Effective High-Entropy Thermal/Environmental Barrier Coatings

Developing cost-effective thermal/environmental barrier coatings (TEBC) requires balance among various properties including low thermal conductivity, matching coefficient of thermal expansion (CTE), high thermal stability, high fracture toughness, and high recession resistance while being affordable. Low oxygen diffusivity is desirable as it can slow down oxygen transport to reach the underlying bond coating and hence delay oxidation of the bond coating. This project aims to design low-cost high-performance TEBC based on high entropy rare earth disilicates to protect SiC-based ceramic matrix composites from chemical and thermal attack for better performance of components in the hot section of gas turbine engines. To accelerate the TEBC design, we utilize first-principles density functional theory to predict key properties including phase stability, CTE, lattice thermal conductivity, temperature-dependent elastic constants, and oxygen diffusivity. Alloying elements including Yb, Y, Er, Eu, Gd, Lu, La, and Ce are considered, and modeling prediction are compared with available experimental results.

coefficient of thermal expansion↗

Benefits to world agriculture through remote sensing

Remote sensing of agricultural land permits crop classification and mensuration which can lead to improved forecasts of production. This technique is particularly important for nations which do not already have an accurate agricultural reporting system. Better forecasts have important economic effects. International grain traders can make better decisions about when to store, buy, and sell. Farmers can make better planting decisions by taking advantage of production estimates for areas out of phase with their own agricultural calendar. World economic benefits will accrue to both buyers and sellers because of increased food supply and price stabilization. This paper reviews the econometric models used to establish this scenario and estimates the dollar value of benefits for world wheat as 200 million dollars annually for the United States and 300 to 400 million dollars annually for the rest of the world.

Buffalano, A. C.↗

Quenching of the beam-plasma instability by large-scale density fluctuations in 3 dimensions

The highly variable, yet low, level of Langmuir waves measured in situ by spacecraft when electron beams associated with type III solar bursts are passing by are addressed by a model based on the existence of large scale density fluctuations capable of sufficiently diffusing small-k beam-unstable Langmuir waves in phase space. The model is also informed by the presence of a significant isotropic nonthermal tail in the distribution function of the background electron population, which is capable of stabilizing larger k modes. The model is able to predict various levels of Langmuir waves, depending on the parameters; calculations indicate that, for realistic parameters, the most unstable small k modes are fully stabilized, while some oblique mode with higher k and lower growth rate may remain unstable.

Muschietti, L.↗

Techniques Optimized for Reducing Instabilities in Advanced Nickel-Base Superalloys for Turbine Blades

The High-Speed Research (HSR) Airfoil Alloy program developed fourth-generation single-crystal superalloys with up to an 85 F increase in creep rupture capability over current production airfoil alloys. Recent results have been generated at the NASA Glenn Research Center on these fourth-generation alloys, but in coated form, for subsonic turbine blade applications under NASA's Ultra-Efficient Engine Technology (UEET) Program. One goal for UEET is to optimize the airfoil alloy/thermal barrier coating system for 3100 F turbine inlet temperatures. The state-of-the art turbine blade airfoil system consists of a superalloy single crystal that provides the basic mechanical performance of the airfoil. A thermal barrier coating is used to reduce the temperature of the base superalloy, and a bondcoat is deposited between the base material and the thermal barrier coating. The bondcoat improves the oxidation and corrosion resistance of the base superalloy and improves the spallation resistance of the thermal barrier coating. A commercial platinum aluminide bondcoat was applied to the HSR-developed alloys, and a diffusion zone developed as a result of interaction between the bondcoat and the superalloy. Optimized strength is obtained for superalloys when the refractory element content is high and the limits of microstructural stability are approached or exceeded slightly. For fourthgeneration alloys, instability leads to the formation of topologically close packed (TCP) phases, which form internally in the superalloy, and a secondary reaction zone (SRZ), which forms under the diffusion zone. There was a concern that excessive quantities of either TCP or SRZ might decrease the mechanical properties of the superalloy, with SRZ thought to be particularly detrimental and its formation unpredictable. Thus, an SRZreduction effort was initiated in the NASA UEET Program so that methods developed during the HSR project could be optimized further to reduce or eliminate the SRZ. An SRZ is a three-phase constituent composed of TCP and stringers of gamma phase in a matrix of gamma prime. An incoherent grain boundary separates the SRZ from the gammagamma prime microstructure of the superalloy. The SRZ is believed to form as a result of local chemistry changes in the superalloy due to the application of the diffusion aluminide bondcoat. Locally high surface stresses also appear to promote the formation of the SRZ. Thus, techniques that change the local alloy chemistry or reduce surface stresses have been examined for their effectiveness in reducing SRZ. These SRZ-reduction steps are performed on the test specimen or the turbine blade before the bondcoat is applied. Stressrelief heat treatments developed at NASA Glenn have been demonstrated to reduce significantly the amount of SRZ that develops during subsequent high-temperature exposures. Stress-relief heat treatments reduce surface stresses by recrystallizing a thin surface layer of the superalloy. However, in alloys with very high propensities to form SRZ, stress relief heat treatments alone do not eliminate SRZ entirely. Thus, techniques that modify the local chemistry under the bondcoat have been emphasized and optimized successfully at Glenn. One such technique is carburization, which changes the local chemistry by forming submicron carbides near the surface of the superalloy. Detailed characterizations have demonstrated that the depth and uniform distribution of these carbides are enhanced when a stress relief treatment and an appropriate surface preparation are employed in advance of the carburization treatment. Even in alloys that have the propensity to develop a continuous SRZ layer beneath the diffusion zone, the SRZ has been completely eliminated or reduced to low, manageable levels when this combination of techniques is utilized. Now that the techniques to mitigate SRZ have been established at Glenn, TCP phase formation is being emphasized in ongoing work under the UEET Program. The limitsf stability of the fourth-generation alloys with respect to TCP phase formation are currently being defined along with high-temperature creep rupture properties. In addition, a regression model is being developed at Glenn for the prediction of the presence of TCP phase in the microstructure and SRZ under the diffusion zone. The model is based on a design-of-experiments methodology with emphasis on the potential synergistic effects of alloying elements.

MacKay, Rebecca A.↗

Microscale Fracture Testing of HfO2-Si Environmental Barrier Coatings

Environmental barrier coatings (EBCs) play a vital role in protecting advanced turbine components constructed from ceramic matrix composites. EBC performance is evaluated based on many factors such as mechanical and thermal properties and chemical stability. This study focuses on the mechanical properties of individual phases within a HfO2-Si EBC through the combined use of chevron-notched microcantilevers and finite element modeling. The Si- and HfO2-rich phases were found to have fracture toughness K(sub IC) values of 1.36+/-0.07 MPa·m1/2 and 1.99+/-0.36 MPa·m1/2, respectively. Despite irregular notch geometry, calculated K(sub IC) values agreed reasonably with literature values of monolithic samples for the respective phases. The relatively large scatter in the HfO2-rich samples is attributed to heterogeneity in fracture feature size and distribution of the HfO2 and HfSiO4 phases. Comparisons with bulk single-edge V-notched beams suggest bulk behavior is dictated by the fracture behavior of the Sirich phase with no contribution from the HfO2-rich phase.

Robertson, Andrew L.↗

Effects of Transition-Metal Mixing on Na Ordering and Kinetics in Layered P2 Oxides

Layered P2 oxides are promising cathode materials for rechargeable sodium-ion batteries. In this work, we systematically investigate the effects of transition-metal (TM) mixing on Na ordering and kinetics in the Na x Co 1-y Mn y O 2 model system using density-functional-theory (DFT) calculations. The DFT-predicted 0-K stability diagrams indicate that Co-Mn mixing reduces the energetic differences between Na orderings, which may account for the reduction of the number of phase transformations observed during the cycling of mixed-TM P2 layered oxides compared to a single TM. Using ab initio molecular-dynamics simulations and nudged elastic-band calculations, we show that the TM composition at the Na(1) (face-sharing) site has a strong influence on the Na site energies, which in turn impacts the kinetics of Na diffusion towards the end of the charge. Furthermore, by employing a site-percolation model, we establish theoretical upper and lower bounds for TM concentrations based on their effect on Na(1) site energies, providing a framework to rationally tune mixed-TM compositions for optimal Na diffusion.

25 ENERGY STORAGE↗