Search NASA⌕ Search

SEARCH · Search NASA

Results for “predictive distribution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

Prediction of vortex shedding from forebodies with chines

An engineering prediction method and associated computer code VTXCHN to predict nose vortex shedding from circular and noncircular forebodies with sharp chines edges in subsonic flow at angles of attack and roll are presented. Axisymmetric bodies are represented by point sources and doublets, and noncircular cross sections are transformed to a circle by either analytical or numerical conformal transformations. The lee side vortex wake is modeled by discrete vortices in crossflow planes along the body; thus the three-dimensional steady flow problem is reduced to a two-dimensional, unsteady, separated flow problem for solution. Comparison of measured and predicted pressure distributions, flow field surveys, and aerodynamic characteristics are presented for noncircular bodies alone and forebodies with sharp chines.

Mendenhall, Michael R.↗

Stochastic modeling of crack initiation and short-crack growth under creep and creep-fatigue conditions

A simplified stochastic model is proposed for crack initiation and short-crack growth under creep and creep-fatigue conditions. Material inhomogeneity provides the random nature of crack initiation and early growth. In the model, the influence of microstructure is introduced by the variability of: (1) damage accumulation along grain boundaries, (2) critical damage required for crack initiation or growth, and (3) the grain-boundary length. The probabilities of crack initiation and growth are derived by using convolution integrals. The model is calibrated and used to predict the crack density and crack-growth rate of short cracks of 304 stainless steel under creep and creep-fatigue conditions. The mean-crack initiation lives are predicted to be within an average deviation of about 10 percent from the experimental results. The predicted comulative distributions of crack-growth rate follow the experimental data closely. The applicability of the simplified stochastic model is discussed and the future research direction is outlined.

Kitamura, Takayuki↗

Improved Nonequilibrium Algebraic Model Of Turbulence

Blend of previous models predicts pressure distributions more accurately. Improved algebraic model represents some of time-averaged effects of turbulence in transonic flow of air over airfoil. Based partly on comparisons among various eddy-viscosity formulations for turbulence and partly on premise that law of wall more universally valid in immediate region of surface in presence of adverse gradient of pressure than mixing-length theory and original Johnson and King model.

Johnson, D. A.↗

The lightcraft project

Rensselaer Polytechnic Institute has been developing a transatmospheric 'Lightcraft' technology which uses beamed laser energy to propel advanced shuttle craft to orbit. In the past several years, Rensselaer students have analyzed the unique combined-cycle Lightcraft engine, designed a small unmanned Lightcraft Technology Demonstrator, and conceptualized larger manned Lightcraft - to name just a few of the interrelated design projects. The 1990-91 class carried out preliminary and detailed design efforts for a one-person 'Mercury' Lightcraft, using computer-aided design and finite-element structural modeling techniques. In addition, they began construction of a 2.6 m-diameter, full-scale engineering prototype mockup. The mockup will be equipped with three robotic legs that 'kneel' for passenger entry and exit. More importantly, the articulated tripod gear is crucial for accurately pointing at, and tracking the laser relay mirrors, a maneuver that must be performed just prior to liftoff. Also accomplished were further design improvements on a 6-inch-diameter Lightcraft model (for testing in RPI's hypersonic tunnel), and new laser propulsion experiments. The resultant experimental data will be used to calibrate Computational Fluid Dynamic (CFD) codes and analytical laser propulsion models that can simulate vehicle/engine flight conditions along a transatmospheric boost trajectory. These efforts will enable the prediction of distributed aerodynamic and thruster loads over the entire full-scale spacecraft.

Messitt, Don G.↗

Explosive volcanism and the compositions of cores of differentiated asteroids

Eleven iron meteorite groups show correlations between Ni and siderophile trace elements that are predictable by distribution coefficients between liquid and solid metal in fractionally crystallizing metal magmas. These meteorites are interpreted to be fragments of the fractionally crystallized cores of eleven differentiated asteroids. Many of these groups crystallized from S-depleted magmas which we propose resulted from removal of the first partial melt (the Fe,Ni-FeS cotectic melt) by explosive pyroclastic volcanism of the type envisaged by Wilson and Keil (1991). We show that these dense, negatively buoyant melts can be driven to asteroidal surfaces due to the presence of excess pressure in the melt and the presence of buoyant bubbles of gas which decrease the density of the melt. We also show that, in typical asteroidal materials, veins will form which grow into dikes and serve as pathways for migration of melt and gas to asteroidal surfaces. Since cotectic Fe, Ni-FeS melt consists of about 85 wt pct FeS and 15 wt pct Fe, Ni, removal of small volumes of eutectic melts results in major loss of S but only minor loss of Fe,Ni, thus leaving sufficient Fe,Ni to form sizeable asteroidal cores.

Keil, Klaus↗

Continuous wave dye-laser technique for simultaneous, spatially resolved measurements of temperature, pressure, and velocity of NO in an underexpanded free jet

Gas dynamic quantities within an underexpanded nitrogen free jet, seeded with 0.5 percent NO, were measured nonintrusively by using an intracavity-doubled, rapid-tuning, CW ring dye laser. The UV beam passed obliquely through the jet axis, and its frequency repetitively scanned across adjacent rotational lines in the NO gamma band near 225 nm at a rate of 4 kHz. Spatially resolved excitation scans were obtained by monitoring the induced broadband fluoresence. Modeling the Doppler-shifted excitation scans with Voigt profiles permitted simultaneous determinations of NO velocity, rotational temperature, and pressure. Zero Doppler shift was referenced to an absorption trace obtained across a static cell and recorded concurrently with the excitation scan. Typically, the measured and predicted axial distributions agreed within 10 percent. At high Mach numbers there was evidence of rotational freezing of NO.

Di Rosa, Michael D.↗

Explosive volcanism and the compositions of the cores of differentiated asteroids

Eleven iron meteorite groups showing correlations between Ni and siderophile trace elements that are predictable by distribution coefficients between liquid and solid metal of fractionally crystallizing metal magmas, are interpreted to be fragments of the fractionally crystallized cores of 11 differentiated asteroids. Many of these groups crystallized from S-depleted magmas which we propose resulted from removal of the first partial melt (a Fe,Ni-FeS cotectic) by explosive pyroclastic volcanism. It is shown that these dense, negatively buoyant melts can be driven to asteroidal surfaces by the combination of an excess pressure in the melt and the presence of buoyant bubbles of gas which decrease the bulk density of the melt. It is also shown that in typical asteroidal materials, veins will form which grow into dikes and serve as pathways for migration of melt and gas to asteroidal surfaces. Since cotectic Fe,Ni-FeS melt consists of about 85 wt. percent FeS and 15 wt. percent Fe,Ni, removal of small volumes of eutectic melts results in major loss of S but only minor loss of Fe,Ni, thus leaving sufficient Fe,Ni to form sizeable asteroidal cores.

Keil, Klaus↗

Physics, chemistry and pulmonary sequelae of thermodegradation events in long-mission space flight

An event in which electronic insulation consisting of polytetrafluoroethylene undergoes thermodegradation on the Space Station Freedom is considered experimentally and theoretically from the initial chemistry and convective transport through pulmonary deposition in humans. The low-gravity enviroment impacts various stages of event simulation. Vapor-phase and particulate thermodegradation products were considered as potential spacecraft contaminants. A potential pathway for the production of ultrafine particles was identified. Different approaches to the simulation and prediction of contaminant transport were studied and used to predict the distribution of generic vapor-phase products in a Space Station model. A lung transport model was used to assess the pulmonary distribution of inhaled particles, and, finally, the impact of adaptation to low gravity on the human response to this inhalation risk was explored on the basis of known physiological modifications of the immune, endocrine, musculoskeletal and pulmonary systems that accompany space flight.

Todd, Paul↗

Preliminary analysis of fluctuations in the received uplink-beacon-power data obtained from the GOLD experiments

Uplink data from recent free-space optical communication experiments carried out between the Table Mountain Facility and the Japanese Engineering Test Satellite are used to study fluctuations caused by beam propagation through the atmosphere. The influence of atmospheric scintillation, beam wander and jitter, and multiple uplink beams on the statistics of power received by the satellite is analyzed and compared to experimental data. Preliminary analysis indicates the received signal obeys an approximate lognormal distribution, as predicted by the weak-turbulence model, but further characterization of other sources of fluctuations is necessary for accurate link predictions.

M. Jeganathan↗

Theoretical Basis for Finite Difference Extrapolation of Sonic Boom Signatures

Calculation of sonic boom signatures for aircraft has traditionally followed the methods of Whitham' and Walkden. The wave disturbance generated by the vehicle is obtained by area rule linearized supersonic flow methods, which yield a locally axisymmetric asymptotic solution. This solution is acoustic in nature, i.e., first order in disturbance quantities, and corresponds to ray acoustics. Cumulative nonlinear distortion of the signature is incorporated by using this solution to adjust propagation speed to first order, thus yielding a solution second order in disturbance quantities. The effects of atmospheric gradients are treated by Blokhintzov's method of geometrical acoustics. Both nonlinear signature evolution and ray tracing are applied as if the pressure field very close to the vehicle were actually that given by the source term (the 'F-function') of the asymptotic linearized flow solution. The viewpoint is thus that the flow solution exists at a small radius near the vehicle, and may be treated as an input to an extrapolation procedure consisting of ray tracing and nonlinear aging. The F-function is often regarded as a representation of a near-field pressure signature, and it is common for computational implementations to treat it interchangeably with the pressure signature. There is a 'matching radius' between the source function and the subsequent propagation extrapolation. This viewpoint has been supported by wind tunnel tests of simple models, and very typically yields correct results for actual flight vehicles. The assumption that the F-function and near-field signature are interchangeable is generally not correct. The flowfield of a vehicle which is not axisymmetric contains crossflow components which are very significant at small radii and less so at larger distances. From an acoustical viewpoint, the crossflow is equivalent to source diffraction portions of the wave field. Use of the F-function as a near field signature effectively assumes that the diminution of the crossflow/diffraction component may be applied all at once at the matching radius noted above. This approximation, though not rigorously validated, is responsible for the usual correct far-field results. On the other hand, if an actual near-field signature (either from wind tunnel or CFD data) is used at a starting point rather than one based on th effective source distribution, the predicted far-field signature is generally wrong.

Plotkin, Kenneth J.↗

The Melting of Aqueous Foams

Diffusing-wave spectroscopy measurements show that ordinarily solid aqueous foams flow by a series of stick-slip avalanche-like rearrangements of neighboring bubbles from one tight packing configuration to another. Contrary to a recent prediction, the distribution of avalanche sizes do not obey a power-law distribution characteristic of self-organized criticality. This can be understood from a simple model of foam mechanics based on bubble-bubble interactions.

Durian, Douglas J.↗

Excitation and Evolution of Structure in Galaxies

Even casual examination shows that most disk galaxies are not truly symmetric but exhibit a variety of morphological peculiarities of which spiral arms and bars are the most pronounced. After decades of effort, we now know that these features may be driven by environmental disturbance acting directly on the disk, in addition to self-excitation of a local disturbance (e.g. by swing amplification). However, all disks are embedded within halos and therefore are not dynamically independent. Are halos susceptible to such disturbances as well? If so, can the affect disks and on what time scales? y Until recently, conventional wisdom was that halos acted to stabilize disks but otherwise remained relatively inert. The argument behind this assumption is as follows. Halos, spheroids and bulges are supported against their own gravity by the random motion of their stars, a so-called "hot" distribution. On all but the largest scales, they look like a nearly homogeneous thermal bath of stars. Because all self-sustaining patterns or waves in a homogeneous universe of stars with a Maxwellian velocity distribution are predicted to damp quickly (e.g. Ikeuchi et al. 1974), one expects that any pattern will be strongly damped in halos and spheroids as well. However, recent work suggests that halos do respond to tidal encounters by companions or cluster members and are susceptible to induction of long-lived modes.

Weinberg, Martin D.↗

Preliminary Analysis of Fluctuations in the Received Uplink-Beacon-Power Data Obtained From the GOLD Experiments

Uplink data from recent free-space optical communication experiments carried out between the Table Mountain Facility and the Japanese Engineering Test Satellite are used to study fluctuations caused by beam propagation through the atmosphere. The influence of atmospheric scintillation, beam wander and jitter, and multiple uplink beams on the statistics of power received by the satellite is analyzed and compared to experimental data. Preliminary analysis indicates the received signal obeys an approximate lognormal distribution, as predicted by the weak-turbulence model, but further characterization of other sources of fluctuations is necessary for accurate link predictions.

Jeganathan, M.↗

Hydrostar Thermal and Structural Deformation Analyses of Antenna Array Concept

The proposed Hydrostar mission used a large orbiting antenna array to demonstrate synthetic aperture technology in space while obtaining global soil moisture data. In order to produce accurate data, the array was required to remain as close as possible to its perfectly aligned placement while undergoing the mechanical and thermal stresses induced by orbital changes. Thermal and structural analyses for a design concept of this antenna array were performed. The thermal analysis included orbital radiation calculations, as well as parametric studies of orbit altitude, material properties and coating types. The thermal results included predicted thermal distributions over the array for several cases. The structural analysis provided thermally-driven deflections based on these cases, as well as based on a 1-g inertial load. In order to minimize the deflections of the array in orbit, the use of XN70, a carbon-reinforced polycyanate composite, was recommended.

Amundsen, Ruth M.↗

Visualization of In-Flight Flow Phenomena Using Infrared Thermography

Infrared thermography was used to obtain data on the state of the boundary layer of a natural laminar flow airfoil in supersonic flight. In addition to the laminar-to-turbulent transition boundary, the infrared camera was able to detect shock waves and present a time dependent view of the flow field. A time dependent heat transfer code was developed to predict temperature distributions on the test subject and any necessary surface treatment. A commercially available infrared camera was adapted for airborne use in this application. Readily available infrared technology has the capability to provide detailed visualization of various flow phenomena in subsonic to hypersonic flight regimes.

Banks, D. W.↗

BOREAS HYD-3 Tree Measurements

The BOREAS HYD-3 team collected several data sets related to the hydrology of forested areas. This data set contains measurements of canopy density (closure), stem density, and DBH from a variety of sites. Canopy density measurements were made during the FFC-W and FFC-T 1994 in both the SSA and the NSA. Stem density measurements were made during FFC-W 1996 in the SSA only. Canopy density measurements were made using a forest densiometer, while measurements of stem density and DBH were made using standard techniques. This study was undertaken to predict spatial distributions of energy transfer, snow properties important to the hydrology, remote sensing signatures, and transmissivity of gases through the snow and their relation to forests in boreal ecosystems. The data are available in tabular ASCII files. The data files are available on a CD-ROM (see document number 20010000884) or from the Oak Ridge National Laboratory (ORNL) Distributed Active Archive Center (DAAC).

Hardy, Janet P.↗

BOREAS HYD-3 Snow Measurements

The Boreal Ecosystem-Atmosphere Study (BOREAS) Hydrology (HYD)-3 team collected several data sets related to the hydrology of forested areas. This data set contains measurements of snow depth, snow density in three cm intervals, an integrated snow pack density and snow water equivalent (SWE), and snow pack physical properties from snow pit evaluation taken in 1994 and 1996. The data were collected from several sites in both the southern study area (SSA) and the northern study area (NSA). A variety of standard tools were used to measure the snow pack properties, including a meter stick (snow depth), a 100 cc snow density cutter, a dial stem thermometer, and the Canadian snow sampler as used by HYD-4 to obtain a snow pack-integrated measure of SWE. This study was undertaken to predict spatial distributions of snow properties important to the hydrology, remote sensing signatures, and the transmissivity of gases through the snow. The data are available in tabular ASCII files. The snow measurement data are available from the Earth Observing System Data and Information System (EOSDIS) Oak Ridge National Laboratory (ORNL) Distributed Active Archive Center (DAAC). The data files are available on a CD-ROM (see document number 20010000884).

Hardy, Janet P.↗

Effect of Elevated Pressure on the Heat Transfer and Power Requirements During Bridgman Growth of PMN-PT Crystals

Performance of the furnace during Bridgman growth of the lead magnesium niobate-lead titanate crystal (PMN-PT) is analyzed. PMN-PT is electrostrictive ceramic that has near ideal strain-voltage function. Furthermore piezoelectric (2000 to 2300 pC/N) and coupling (92 to 95%) constants are exceptionally good. Due to these properties PMN-PT has wide range of applications - from sonars to transducers in a high precision optical systems. In this research first attempt to crystallize PMN-PT in a Mellen type vertical Bridgman furnace was not successful, as melting temperature of precursor materials was not achieved. At this point choice was between building a new more powerful facility or finding ways to enhance performance of the existing furnace. Besides adjusting power supply to the individual heating elements, redesigning ampoule holding cartridge and improving furnace insulation one more radical improvement was proposed. The entire furnace was placed into the high pressure chamber. Further experiments confirmed that temperature inside the furnace was increased sufficiently to melt precursor materials to obtain PMN-PT. Numerical modeling is undertaken to find limitations of this technique and to predict temperature distribution inside the ampoule. It is of interest also to account for main factors contributing to a higher temperatures achieved in the furnace under the higher pressure (up to 10 atm.). Numerical model of the furnace is based on general purpose finite - element code FIDAP and on previous efforts to model Bridgman type furnace with multiply heaters. In order to account for all heat transfer mechanism involved - conduction, convection and radiation - different parts of the furnace are modeled in accordance with expected dominant mode of heat transfer - conduction in the solid parts, conduction and radiation in the ampoule, gas convection and conduction in the furnace openings complemented with wall-to-wall radiation. Because of these complicating factors, dimensional rather than non-dimensional modeling is performed using steady-state 2-D and 3-D models. Particular attention is paid to the modeling of radiation in a semitransparent material of ampoule 7 sapphire. The radiation model is validated by solving realistic test problem - conduction and radiation heat transfer in the fused quartz. Results are in agreement with both experimental and analytical data.

Bune, Andris↗