Search NASA⌕ Search

SEARCH · Search NASA

Results for “predictive modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39
All sourcesNASA NTRSDOE OSTI
NASA NTRS2015

Estimation of Aerosol Optical Depth at Different Wavelengths by Multiple Regression Method

This study aims to investigate and establish a suitable model that can help to estimate aerosol optical depth (AOD) in order to monitor aerosol variations especially during non-retrieval time. The relationship between actual ground measurements (such as air pollution index, visibility, relative humidity, temperature, and pressure) and AOD obtained with a CIMEL sun photometer was determined through a series of statistical procedures to produce an AOD prediction model with reasonable accuracy. The AOD prediction model calibrated for each wavelength has a set of coefficients. The model was validated using a set of statistical tests. The validated model was then employed to calculate AOD at different wavelengths. The results show that the proposed model successfully predicted AOD at each studied wavelength ranging from 340 nm to 1020 nm. To illustrate the application of the model, the aerosol size determined using measure AOD data for Penang was compared with that determined using the model. This was done by examining the curvature in the ln [AOD]-ln [wavelength] plot. Consistency was obtained when it was concluded that Penang was dominated by fine mode aerosol in 2012 and 2013 using both measured and predicted AOD data. These results indicate that the proposed AOD prediction model using routine measurements as input is a promising tool for the regular monitoring of aerosol variation during non-retrieval time.

Tan, Fuyi↗
NASA NTRS2008

Wake Vortex Inverse Model User's Guide

NorthWest Research Associates (NWRA) has developed an inverse model for inverting landing aircraft vortex data. The data used for the inversion are the time evolution of the lateral transport position and vertical position of both the port and starboard vortices. The inverse model performs iterative forward model runs using various estimates of vortex parameters, vertical crosswind profiles, and vortex circulation as a function of wake age. Forward model predictions of lateral transport and altitude are then compared with the observed data. Differences between the data and model predictions guide the choice of vortex parameter values, crosswind profile and circulation evolution in the next iteration. Iterations are performed until a user-defined criterion is satisfied. Currently, the inverse model is set to stop when the improvement in the rms deviation between the data and model predictions is less than 1 percent for two consecutive iterations. The forward model used in this inverse model is a modified version of the Shear-APA model. A detailed description of this forward model, the inverse model, and its validation are presented in a different report (Lai, Mellman, Robins, and Delisi, 2007). This document is a User's Guide for the Wake Vortex Inverse Model. Section 2 presents an overview of the inverse model program. Execution of the inverse model is described in Section 3. When executing the inverse model, a user is requested to provide the name of an input file which contains the inverse model parameters, the various datasets, and directories needed for the inversion. A detailed description of the list of parameters in the inversion input file is presented in Section 4. A user has an option to save the inversion results of each lidar track in a mat-file (a condensed data file in Matlab format). These saved mat-files can be used for post-inversion analysis. A description of the contents of the saved files is given in Section 5. An example of an inversion input file, with preferred parameters values, is given in Appendix A. An example of the plot generated at a normal completion of the inversion is shown in Appendix B.

Lai, David↗
NASA NTRS1994

The application of Newman crack-closure model to predicting fatigue crack growth

Newman crack-closure model and the relevant crack growth program were applied to the analysis of crack growth under constant amplitude and aircraft spectrum loading on a number of aluminum alloy materials. The analysis was performed for available test data of 2219-T851, 2024-T3, 2024-T351, 7075-T651, 2324-T39, and 7150-T651 aluminum materials. The results showed that the constraint factor is a significant factor in the method. The determination of the constraint factor is discussed. For constant amplitude loading, satisfactory crack growth lives could be predicted. For the above aluminum specimens, the ratio of predicted to experimental lives, Np/Nt, ranged from 0.74 to 1.36. The mean value of Np/Nt was 0.97. For a specified complex spectrum loading, predicted crack growth lives are not in very good agreement with the test data. Further effort is needed to correctly simulate the transition between plane strain and plane stress conditions, existing near the crack tip.

Si, Erjian↗
NASA NTRS1973

An injector design model for predicting rocket engine performance and heat transfer

A model is formulated for estimating the performance and chamber heat transfer in rocket injectors/chambers operating with gaseous H2-O2 propellants. The model quantifies the combustion performance and chamber heat flux for variables such as chamber length, element type, element area ratio, impingement angle, thrust/element, mixture ratio, moment ratio, element spacing, and physical size. Design equations are given and curves are plotted for evaluation of combustion performance in injectors comprised of F-O-F triplet, premix, coaxial and swirl coaxial element types. Curve plots and equations are also included for estimation of the chamber wall heat fluxes generated by these element types.

Calhoon, D. F.↗
NASA NTRS1992

Jovian bremsstrahlung X-rays - A Ulysses prediction

Modeling results reported here show that precipitating auroral electrons with sufficient energy to be consistent with the Voyager UVS observations produce bremsstrahlung X-rays with sufficient energy and intensity to be detected by the Solar Flare X-ray and Cosmic-Ray-Burst Instrument on board the Ulysses spacecraft. The detection of such bremsstrahlung X-rays at Jupiter would provide strong evidence for the electron-precipitation mechanism, although it does not rule out the possibility of some heavy ion involvement, and thus makes a significant contribution toward solving the mystery of the Jovian aurora.

Waite, J. H., Jr.↗
NASA NTRSDate not supplied

A Sample/Jitter Monte Carlo Technique for Main Parachute Loads Predictions

Models for Orion parachute performance are based on reconstructions of the Capsule Parachute Assembly System (CPAS) drop test campaign and were documented in the CPAS “Model Memo.” Experience with similar Commercial Crew Program (CCP) parachute systems resulted in some updates to the Orion models in preparation for Artemis missions. The reefing cutter dispersion model for the drogues and mains had been overly-conservative by producing wide timing differences within clusters. A higher-fidelity timing model was generated by separating out in-lot variation and temperature effects. The main parachute inflation model had accounted for some correlations between parameters using complicated 2-D geometric bounding, but the results tended to exaggerate individual peak loads from fast (leading) inflations and under-emphasize actual lagging experience. Several flight tests were reconstructed again with an emphasis on matching peak load magnitudes using a search algorithm. A simpler method for generating inflation parameters uses the 3-D correlated reconstructed “samples” with some random “jitter” applied. Dispersed Monte Carlo inputs are then checked against flight test data to evaluate whether they represent reality.

parachutes↗
NASA NTRSDate not supplied

Expedited Model Building Method for Rocket Nozzle Side Loading

Statistical analysis of test data is currently the preferred method of creating models for uncharacterized side loading in rocket nozzles. However, statistical analysis requires multiple data sets to be reliable; getting these sets requires building and testing multiple rocket motors, which is not feasible given the incredible time and cost required to do so. By using a combination of geometry, simplified finite element analysis (FEA) analogs, and algebra we can create a limited predictive model from only one test data set. Once created, the model requires only the input from one strain gauge located at each yaw and pitch attachment bracket for the actuation system. This process is not computationally intensive, therefore saving an abundance of time and budget over using full 3D FEA models to develop a similar predictive model. To develop the model, conversion factors between the strain at the gauge locations and corresponding actuator load is derived from the data. These conversion factors are used to create a “conversion ellipse” that bounds the constitutive properties of the nozzle as one lumped factor. Using a 2D cross-sectional analog of the nozzle exit plane, we create a function that allows us to determine the azimuthal location of the unexpected load based on the ratio between yaw and pitch strain readings. Combining this with the “conversion ellipse” yields a function that given the strain reading outputs an induced actuator load, regardless of the azimuthal location of the unexpected load. As previously mentioned, this predictive model is limited in its application as there is inaccuracy introduced by the use of data by only one test as well as simplifying assumptions. This approach makes a useful tool to quickly determine whether uncharacterized actuator loading events can damage actuation systems or induce loading that exceeds design limits.

Seetha A Kolli↗
NASA NTRS2017

Sonora: A New Generation Model Atmosphere Grid for Brown Dwarfs and Young Extrasolar Giant Planets

Brown dwarf and giant planet atmospheric structure and composition has been studied both by forward models and, increasingly so, by retrieval methods. While indisputably informative, retrieval methods are of greatest value when judged in the context of grid model predictions. Meanwhile retrieval models can test the assumptions inherent in the forward modeling procedure. In order to provide a new, systematic survey of brown dwarf atmospheric structure, emergent spectra, and evolution, we have constructed a new grid of brown dwarf model atmospheres. We ultimately aim for our grid to span substantial ranges of atmospheric metallilcity, C/O ratios, cloud properties, atmospheric mixing, and other parameters. Spectra predicted by our modeling grid can be compared to both observations and retrieval results to aid in the interpretation and planning of future telescopic observations. We thus present Sonora, a new generation of substellar atmosphere models, appropriate for application to studies of L, T, and Y-type brown dwarfs and young extrasolar giant planets. The models describe the expected temperature-pressure profile and emergent spectra of an atmosphere in radiative-convective equilibrium for ranges of effective temperatures and gravities encompassing 200 less than or equal to T(sub eff) less than or equal to 2400 K and 2.5 less than or equal to log g less than or equal to 5.5. In our poster we briefly describe our modeling methodology, enumerate various updates since our group's previous models, and present our initial tranche of models for cloudless, solar metallicity, and solar carbon-to-oxygen ratio, chemical equilibrium atmospheres. These models will be available online and will be updated as opacities and cloud modeling methods continue to improve.

emergent spectra↗
NASA NTRS1993

Sensor fusion display evaluation using information integration models in enhanced/synthetic vision applications

Based on existing integration models in the psychological literature, an evaluation framework is developed to assess sensor fusion displays as might be implemented in an enhanced/synthetic vision system. The proposed evaluation framework for evaluating the operator's ability to use such systems is a normative approach: The pilot's performance with the sensor fusion image is compared to models' predictions based on the pilot's performance when viewing the original component sensor images prior to fusion. This allows for the determination as to when a sensor fusion system leads to: poorer performance than one of the original sensor displays, clearly an undesirable system in which the fused sensor system causes some distortion or interference; better performance than with either single sensor system alone, but at a sub-optimal level compared to model predictions; optimal performance compared to model predictions; or, super-optimal performance, which may occur if the operator were able to use some highly diagnostic 'emergent features' in the sensor fusion display, which were unavailable in the original sensor displays.

Foyle, David C.↗
NASA NTRS1985

Sensitivity of an energy balance climate model with predicted snowfall rates

A snowfall parameterization and a polar-ice-sheet model are developed and applied to the two-level zonally averaged seasonal energy-balance climate model of Held and Suarez (1979), and sensitivity experiments involving changes in insolation are performed both with and without ice sheets. The results are presented in tables and graphs, and the hydrological-cycle response to insolation changes is found to be similar to that predicted by global-circulation models employing prescribed precipitation levels, with a somewhat higher sensitivity in the snow line. The area covered by ice sheets in the ice-sheet models is shown to be greater than that covered by permanent snow in the models without ice sheets, an effect attributed to lower surface temperatures over the ice. It is inferred that an increase in the solar constant can cause increased high-latitude precipitation but not an ice age.

Bowman, K. P.↗
DOE OSTI2025

A Novel Secondary Frequency Regulation with Optimal Priority Selection of AGC Contributions

Automatic generation control (AGC) is used to maintain acceptable frequencies during operation owing to fluctuations in load and variable resources. In conventional industry applications, the AGC signal is allocated to each generator according to the predispatched frequency regulation capacity or the order of economic efficiency. However, with the increasing integration of inverter-based resources (IBRs), the retirement of conventional synchronous generators (SGs) has posed new challenges to frequency control schemes because fewer of them are optional for AGC regulation. In this paper, we propose a novel model predictive control (MPC)-based frequency regulation model to reduce control cost and ensure stability, by considering different critical dynamic factors when optimally selecting the AGC units. The proposed control model – developed in a general form – comprehensively embeds characteristics such as generator ramping rates, reserve capacity, and operation cost. The model predictive control–based two-timescale AGC scheme enhances the capability of immunizing the power disturbance from types of resources by coordinating the control signals between faster IBRs and slower SGs. The case study’s proposed model is verified to be effective in synergistically enforcing different dynamic properties of AGC units into the frequency regulation scheme.

Jiang, Sufan [The University of North Carolina at ↗
NASA NTRS1978

Stratospheric NO and HNO3 observations in the Northern Hemisphere for three seasons

NO, HNO3, and O3 levels and air temperature were measured as a function of latitude in the 18 to 21 km region of the stratosphere, and the sum of odd nitrogen, equal to NO + NO2 + HNO3, was calculated and compared with model predictions. (NO2 values were inferred from photochemical equilibrium characteristics.) The data show that NO measurements generally exhibit good agreement with model predictions for low and midlatitudes but poor agreement at high latitudes. The experimental sum of odd nitrogen mixing ratios and model predictions agree within a factor of 2-1/2 or better at both 20 and 40 deg N, and show excellent agreement for latitudinal dependence.

Loewenstein, M.↗
NASA NTRS1999

Comparison of the SPE Model with Proton and Heavy Ion Data

Proton data from the GOES 6 and 7 satellites and heavy ion data from the IMP-8 satellite have been compared to the expected results of Nymmik's new model for solar particle event fluences. This model calculates the energy spectra of Ions for protons through nickel for solar particle events, based upon the observed proton integral fluence above 30 MeV. Based upon 27 observed proton events of solar cycle 22, and three large historical events, with integral fluences above 30 MeV of greater than 106 particles/cm2, a reasonable agreement with model predictions is seen for more than half of the events. However, several events show a marked departure from the model predictions, leading to the conclusion that there may exist more than a single class of event, or that it may be necessary to include additional parameters within the model, such as solar disk position of the source flare, or height of disturbance in the solar corona. Data for heavy Ions, (oxygen and iron), were limited to a total of six solar particle events, of which only two occurred in solar cycle 22. The agreement between data and the model predictions appeared to be quite good, however this agreement was sensitively dependent upon the value taken for the proton fluence above 30 MeV.

Cleghorn, Timothy F.↗
NASA NTRS1992

Dynamic rain fade compensation techniques for the advanced communications technology satellite

The dynamic and composite nature of propagation impairments that are incurred on earth-space communications links at frequencies in and above the 30/20 GHz Ka band necessitate the use of dynamic statistical identification and prediction processing of the fading signal in order to optimally estimate and predict the levels of each of the deleterious attenuation components. Such requirements are being met in NASA's Advanced Communications Technology Satellite (ACTS) project by the implementation of optimal processing schemes derived through the use of the ACTS Rain Attenuation Prediction Model and nonlinear Markov filtering theory. The ACTS Rain Attenuation Prediction Model discerns climatological variations on the order of 0.5 deg in latitude and longitude in the continental U.S. The time-dependent portion of the model gives precise availability predictions for the 'spot beam' links of ACTS. However, the structure of the dynamic portion of the model, which yields performance parameters such as fade duration probabilities, is isomorphic to the state-variable approach of stochastic control theory and is amenable to the design of such statistical fade processing schemes which can be made specific to the particular climatological location at which they are employed.

Manning, Robert M.↗
DOE OSTI2025

Coupled Hydrological-Thermal-Biogeochemical Modeling for Predicting Arctic Carbon Emissions (CH4PACE)

The Arctic, with nearly 1,700 billion metric tons of carbon stored in its soils, is experiencing significant warming trends that raise concerns about the potential release of greenhouse gases, particularly methane. This report investigates the conversion of carbon stored in Arctic soils and permafrost into methane and its subsequent atmospheric release over the coming decades. Recent data indicate a rise in global methane concentrations, highlighting the importance of understanding the mechanisms of methane generation under anaerobic conditions prevalent in thawing permafrost. Our study employs a multi-faceted approach that integrates fieldwork, benchtop experiments, and numerical simulations to explore the subsurface hydrological-thermal-biogeochemical systems influencing methane emissions. We focus on the relationship between microbial activity in decomposing organic matter under oxygen-limited conditions and the transport of methane out of these saturated wetland soils. Key hydrological parameters, including permeability, porosity, and thermal conductivity, were measured on soil samples from Fairbanks, Alaska, and used to parameterize PFLOTRAN, a coupled hydrological-thermal-reactive transport simulator. Our model enables prediction of the evolution of the active layer and its impact on methane production and release. Our findings underscore the critical need for a mechanistic understanding of methane dynamics in permafrost environments to improve predictions of methane emissions in Earth systems models.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Imitating the “breeder's eye”: Predicting grain yield from measurements of non‐yield traits

Abstract Plant breeding relies on information gathered from field trials to select promising new crop varieties for release to farmers and to develop genomic prediction models that can enhance the efficiency of genetic improvement in future breeding cycles. However, generating the genetic marker data required to apply genomic prediction at the early stages of a breeding program remains costly for many public‐sector breeding programs as well as for many plant breeders operating in developing countries. As the pace of climate change intensifies, the time lag of developing and deploying new crop varieties requires plant breeders to make selection decisions without knowing the future environments those crop varieties will encounter in farmers’ fields. Therefore, both lower cost and higher accuracy methods for prediction of crop performance are essential for creating and maintaining resilient agricultural systems in the latter half of the 21 st century. To address this challenge, we conducted linked yield trials of 752 public maize ( Zea mays ) genotypes in two distinct environments. We developed and trained a phenotypic prediction model to predict yield from manually scored plant traits. The phenotypic prediction approach we employed outperformed genomic prediction in predicting yields in a second environment, with 8.7%–63% higher R 2 and 4%–13% less root mean square error than the genomic prediction. The phenotypic prediction has the potential to be applied to a wider range of breeding programs, including those that lack the resources to genotype large populations, such as programs in the developing world, breeding programs for specialty crops, and public sector programs.

60 APPLIED LIFE SCIENCES↗
NASA NTRS2022

The Ozone–Climate Penalty Over South America and Africa By 2100

Climate change has the potential to increase surface ozone (O3) concentrations, known as the “ozone–climate penalty”, through changes to atmospheric chemistry, transport and dry deposition. In the tropics, the response of surface O3 to changing climate is relatively understudied but has important consequences for air pollution and human and ecosystem health. In this study, we evaluate the change in surface O3 due to climate change over South America and Africa using three state-of-the-art Earth system models that follow the Shared Socioeconomic Pathway 3-7.0 emission scenario from CMIP6. In order to quantify changes due to climate change alone, we evaluate the difference between simulations including climate change and simulations with a fixed present-day climate. We find that by 2100, models predict an ozone–climate penalty in areas where O3 is already predicted to be high due to the impacts of precursor emissions, namely urban and biomass burning areas, although on average, models predict a decrease in surface O3 due to climate change. We identify a small but robust positive trend in annual mean surface O3 over polluted areas. Additionally, during biomass burning seasons, seasonal mean O3 concentrations increase by 15 ppb (model range 12 to 18 ppb) in areas with substantial biomass burning such as the arc of deforestation in the Amazon. The ozone–climate penalty in polluted areas is shown to be driven by an increased rate of O3 chemical production, which is strongly influenced by NOx concentrations and is therefore specific to the emission pathway chosen. Multiple linear regression finds the change in NOx concentration to be a strong predictor of the change in O3 production, whereas increased isoprene emission rate is positively correlated with increased O3 destruction, suggesting NOx-limited conditions over the majority of tropical Africa and South America. However, models disagree on the role of climate change in remote, low-NOx regions, partly because of significant differences in NOx concentrations produced by each model. We also find that the magnitude and location of the ozone–climate penalty in the Congo Basin has greater inter-model variation than that in the Amazon, so further model development and validation are needed to constrain the response in central Africa. We conclude that if the climate were to change according to the emission scenario used here, models predict that forested areas in biomass burning locations and urban populations will be at increasing risk of high O3 exposure, irrespective of any direct impacts on O3 via the prescribed emission scenario.

Surface ozone↗
DOE OSTI2024

Genomic prediction of regional-scale performance in switchgrass ( Panicum virgatum ) by accounting for genotype-by-environment variation and yield surrogate traits

Switchgrass is a potential crop for bioenergy or carbon capture schemes, but further yield improvements through selective breeding are needed to encourage commercialization. To identify promising switchgrass germplasm for future breeding efforts, we conducted multisite and multitrait genomic prediction with a diversity panel of 630 genotypes from 4 switchgrass subpopulations (Gulf, Midwest, Coastal, and Texas), which were measured for spaced plant biomass yield across 10 sites. Our study focused on the use of genomic prediction to share information among traits and environments. Specifically, we evaluated the predictive ability of cross-validation (CV) schemes using only genetic data and the training set (cross-validation 1: CV1), a subset of the sites (cross-validation 2: CV2), and/or with 2 yield surrogates (flowering time and fall plant height). We found that genotype-by-environment interactions were largely due to the north–south distribution of sites. The genetic correlations between the yield surrogates and the biomass yield were generally positive (mean height r = 0.85; mean flowering time r = 0.45) and did not vary due to subpopulation or growing region (North, Middle, or South). Genomic prediction models had CV predictive abilities of –0.02 for individuals using only genetic data (CV1), but 0.55, 0.69, 0.76, 0.81, and 0.84 for individuals with biomass performance data from 1, 2, 3, 4, and 5 sites included in the training data (CV2), respectively. To simulate a resource-limited breeding program, we determined the predictive ability of models provided with the following: 1 site observation of flowering time (0.39); 1 site observation of flowering time and fall height (0.51); 1 site observation of fall height (0.52); 1 site observation of biomass (0.55); and 5 site observations of biomass yield (0.84). The ability to share information at a regional scale is very encouraging, but further research is required to accurately translate spaced plant biomass to commercial-scale sward biomass performance.

09 BIOMASS FUELS↗