Search NASA⌕ Search

SEARCH · Search NASA

Results for “program implementation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

NASA/RAE collaboration on nonlinear control using the F-8C digital fly-by-wire aircraft

A cooperative advanced digital research experiment (CADRE) was established by the National Aeronautics and Space Administration (NASA) and the Royal Aircraft Establishment (RAE), in which nonlinear control algorithms developed by the RAE were tested on the F-8C digital fly-by-wire (DFBW) aircraft based at the Dryden Flight Research Facility. In the initial phase of the collaboration, some variable-gain algorithms, referred to collectively as variable integral control to optimize response (VICTOR) algorithms, were fight tested. With VICTOR, various measures available within the control system are used to vary gains and time-constants within the closed loop and thereby enhance the control capability of the system, while reducing the adverse effects of sensor noise on the control surfaces. A review of design procedures for VICTOR and results of preliminary flight tests are presented. the F-8C aircraft is operated in the remotely augmented vehicle (RAV) mode, with the control laws implemented as FORTRAN programs on a ground-based computer. Pilot commands and sensor information are telemetered to the ground, where the data are processed to form surface commands which are then telemetered to the ground, where the data are processed to form surface commands which are then telemetered back to the aircraft. The RAV mode represents a single-string (simplex) system and is therefore vulnerable to a hardover since comparison monitoring is not possible. Hence, extensive error checking is conducted on both the ground and airborne computers to prevent the development of potentially hazardous situations. Experience with the RAV monitoring and validation procedures is described.

Butler, G. F.↗

NASA/RAE collaboration on nonlinear control using the F-8C digital fly-by-wire aircraft

Design procedures are reviewed for variable integral control to optimize response (VICTOR) algorithms and results of preliminary flight tests are presented. The F-8C aircraft is operated in the remotely augmented vehicle (RAV) mode, with the control laws implemented as FORTRAN programs on a ground-based computer. Pilot commands and sensor information are telemetered to the ground, where the data are processed to form surface commands which are then telemetered back to the aircraft. The RAV mode represents a singlestring (simplex) system and is therefore vulnerable to a hardover since comparison monitoring is not possible. Hence, extensive error checking is conducted on both the ground and airborne computers to prevent the development of potentially hazardous situations. Experience with the RAV monitoring and validation procedures is described.

Butler, G. F.↗

NASA-ESA Spacelab systems and programs; Proceedings of the Seminar, Washington, DC, April 23, 24, 1981

Topics discussed include the development status of the Space Shuttle and Spacelab, with attention to Spacelab subsystem performance capabilities and Shuttle-Spacelab flight operations; Spacelab data management and software for science applications, ESA and Space Shuttle pointing systems, and the Space Shuttle's Office of Space and Terrestrial Applications (OSTA)-1 payload. Also covered are the lessons learned from the first Spacelab mission, the pallet-only mode verification flight of the second Spacelab mission, the objectives of the Spacelab mission D1, its role in the German space program, and its implementation, the impact of Spacelab on space-based life sciences research, the high resolution, large area modular reflector array X-ray telescope to be used by Spacelab, and Space Shuttle contamination effects on UV coronagraphic observations.

Moore, J. W.↗

Exosat/Delta - Demonstrated short-term backup launcher capability through international cooperation

The instrumentation, performance parameters, Delta launch implementation, and development program of the Exosat, launched in February 1983 are described. The X ray satellite was integrated into the Delta vehicle over a three month period, and will survey mainly previously observed X ray objects by directing its detectors at them just before they are occulted by the moon. The 120 kg science package, powered by 260 W of power from solar panels, include low- and medium-energy imaging devices. The spacecraft was originally intended for Ariane launch, but scheduling conflicts, plus the need for a polar-type orbit, dictated the use of the Western Space and Missile Center. Maintenance of Delta compatibility throughout the development of the Exosat facilitated the transfer of launch vehicles, as did full existing documentation of the spacecraft and familiarity between the ESA and NASA managers of the development and launch programs, respectively.

Ganoung, J. K.↗

Theoretical Investigation Of Dielectric Horn Antennas

Mathematical model applicable to both solid and hollow dielectric horn antennas implemented in computer program. Conventional hollow metal horns have several disadvantages: difficult to fabricate at short wavelenghts and conducting properties of metal tend to deteriorate with increasing frequency. Dielectric horns offer advantages over conventional metal horns. Computer program permits user to investigate potential of various dielectricantenna designs.

Raines, J. K.↗

Research in computer science

Several short summaries of the work performed during this reporting period are presented. Topics discussed in this document include: (1) resilient seeded errors via simple techniques; (2) knowledge representation for engineering design; (3) analysis of faults in a multiversion software experiment; (4) implementation of parallel programming environment; (5) symbolic execution of concurrent programs; (6) two computer graphics systems for visualization of pressure distribution and convective density particles; (7) design of a source code management system; (8) vectorizing incomplete conjugate gradient on the Cyber 203/205; (9) extensions of domain testing theory and; (10) performance analyzer for the pisces system.

Ortega, J. M.↗

The orbiter air data system

Air data parameters are required during Orbiter atmospheric entry for use by the autoguidance, navigation, and flight control systems, and for crew displays. Conventional aircraft calibrations of the Orbiter air data system were not practicable for the Space Shuttle, therefore extensive wind tunnel testing was required to give confidence in the preflight calibrations. Many challenges became apparent as the program developed; in the overall system design, in the wind tunnel testing program, in the implementation of the air data system calibration, and in the use of the flight data to modify the wind tunnel results. These challenges are discussed along with the methods used to solve the problems.

Hillje, E. R.↗

Challenges in the development of the shuttle extravehicular mobility unit

The development of the Shuttle extravehicular mobility unit (EMU) has required significant technology advances in the design of the astronaut life support system and space-suit assembly. The life support system and space-suit assemblies are integrated into a single system and optimized for the primary function of supporting astronaut extravehicular operations. Rather than accommodating a limited, male-only astronaut population, the EMU must satisfy size requirements for both males and females with a minimum of sized parts. In addition, the Shuttle EMU has been designed to implement Space Shuttle Program philosophy of long operating life and mission reuse capability to minimize program lifetime cost. The advancement in life support system and space-suit technology achieved by the development of the Shuttle extravehicular mobility unit (EMU) is illustrated by comparison with the requirements for and the design features of the Apollo EMU.

Mcmann, H. J.↗

A model for the prediction of latent errors using data obtained during the development process

A model implemented in a program that runs on the IBM PC for estimating the latent (or post ship) content of a body of software upon its initial release to the user is presented. The model employs the count of errors discovered at one or more of the error discovery processes during development, such as a design inspection, as the input data for a process which provides estimates of the total life-time (injected) error content and of the latent (or post ship) error content--the errors remaining a delivery. The model presented presumes that these activities cover all of the opportunities during the software development process for error discovery (and removal).

Gaffney, J. E., Jr.↗

Comparison of manually produced and automated cross country movement maps using digital image processing techniques

The Image-Based Information System (IBIS) was used to automate the cross country movement (CCM) mapping model developed by the Defense Mapping Agency (DMA). Existing terrain factor overlays and a CCM map, produced by DMA for the Fort Lewis, Washington area, were digitized and reformatted into geometrically registered images. Terrain factor data from Slope, Soils, and Vegetation overlays were entered into IBIS, and were then combined utilizing IBIS-programmed equations to implement the DMA CCM model. The resulting IBIS-generated CCM map was then compared with the digitized manually produced map to test similarity. The numbers of pixels comprising each CCM region were compared between the two map images, and percent agreement between each two regional counts was computed. The mean percent agreement equalled 86.21%, with an areally weighted standard deviation of 11.11%. Calculation of Pearson's correlation coefficient yielded +9.997. In some cases, the IBIS-calculated map code differed from the DMA codes: analysis revealed that IBIS had calculated the codes correctly. These highly positive results demonstrate the power and accuracy of IBIS in automating models which synthesize a variety of thematic geographic data.

Wynn, L. K.↗

Acoustics Division recent accomplishments and research plans

The research program currently being implemented by the Acoustics Division of NASA Langley Research Center is described. The scope, focus, and thrusts of the research are discussed and illustrated for each technical area by examples of recent technical accomplishments. Included is a list of publications for the last two calendar years. The organization, staff, and facilities are also briefly described.

Clark, L. R.↗

Measurement of orbital dynamics of the OAST-1 Solar Array using recorded video images

The OAST-1 Solar Array Experiment was flown on Shuttle mission STS-41D on August 31, 1984 for NASA's Office of Aeronautics and Space Technology. It is pointed out that this was the first flight demonstration of the operation of a large solar array which was designed for multiple deployments and retractions. The array represents also a new class of very lightweight, flexible, low-frequency structures. A program was, therefore, implemented with the aim to study the structural dynamics of the array on the basis of a photogrammetric analysis of data obtained with the existing Shuttle closed circuit television (CCTV) system. The present paper has the objective to describe the experiment and its implementation, taking into account the unique process of analyzing the video data.

Miller, J. B.↗

Spacelab dedicated discipline laboratory (DDL) utilization concept

The dedicated discipline laboratory (DDL) concept is a new approach for implementing Spacelab missions that involves the grouping of science instruments into mission complements of single or compatible disciplines. These complements are evolved in such a way that the DDL payloads can be left intact between flights. This requires the dedication of flight hardware to specific payloads on a long-term basis and raises the concern that the purchase of additional flight hardware will be required to implement the DDL program. However, the payoff is expected to result in significant savings in mission engineering and assembly effort. A study has been conducted recently to quantify both the requirements for new hardware and the projected mission cost savings. It was found that some incremental additions to the current inventory will be needed to fly the mission model assumed. Cost savings of $2M to 6.5M per mission were projected in areas analyzed in depth, and additional savings may occur in areas for which detailed cost data were not available.

Wunsch, P.↗

Structural tailoring of SSME turbopump blades (SSME/STAEBL)

Computer structural optimization is applied to the design of Space Shuttle main engine turbopump blades. The optimization is implemented by the program SSME/STAEBL. A general description of this program is given. Design optimization studies for typical blade designs are presented.

Rubinstein, R.↗

Prototyping and implementing flight qualifiable semicustom CMOS P-well bulk integrated circuits in the JPL environment

Presently, there are many difficulties associated with implementing application specific custom or semi-custom (standard cell based) integrated circuits (ICs) into JPL flight projects. One of the primary difficulties is developing prototype semi-custom integrated circuits for use and evaluation in engineering prototype flight hardware. The prototype semi-custom ICs must be extremely cost-effective and yet still representative of flight qualifiable versions of the design. A second difficulty is encountered in the transport of the design from engineering prototype quality to flight quality. Normally, flight quality integrated circuits have stringent quality standards, must be radiation resistant and should consume minimal power. It is often not necessary or cost effective, however, to impose such stringent quality standards on engineering models developed for systems analysis in controlled lab environments. This article presents work originally initiated for ground based applications that also addresses these two problems. Furthermore, this article suggests a method that has been shown successful in prototyping flight quality semi-custom ICs through the Metal Oxide Semiconductor Implementation Service (MOSIS) program run by the University of Southern California's Information Sciences Institute. The method has been used successfully to design and fabricate through the MOSIS three different semi-custom prototype CMOS p-well chips. The three designs make use of the work presented and were designed consistent with design techniques and structures that are flight qualifiable, allowing one hour transfer of the design from engineering model status to flight qualifiable foundry-ready status through methods outlined in this article.

Olson, E. M.↗

Q3DG: A computer program for strain-energy-release rates for delamination growth in composite laminates

The Q3DG is a computer program developed to perform a quasi-three-dimensional stress analysis for composite laminates which may contain delaminations. The laminates may be subjected to mechanical, thermal, and hygroscopic loads. The program uses the finite element method and models the laminates with eight-noded parabolic isoparametric elements. The program computes the strain-energy-release components and the total strain-energy release in all three modes for delamination growth. A rectangular mesh and data file generator, DATGEN, is included. The DATGEN program can be executed interactively and is user friendly. The documentation includes sections dealing with the Q3D analysis theory, derivation of element stiffness matrices and consistent load vectors for the parabolic element. Several sample problems with the input for Q3DG and output from the program are included. The capabilities of the DATGEN program are illustrated with examples of interactive sessions. A microfiche of all the examples is included. The Q3DG and DATGEN programs have been implemented on CYBER 170 class computers. Q3DG and DATGEN were developed at the Langley Research Center during the early eighties and documented in 1984 to 1985.

Raju, I. S.↗

Block 2 SRM conceptual design studies. Volume 1, Book 2: Preliminary development and verification plan

Activities that will be conducted in support of the development and verification of the Block 2 Solid Rocket Motor (SRM) are described. Development includes design, fabrication, processing, and testing activities in which the results are fed back into the project. Verification includes analytical and test activities which demonstrate SRM component/subassembly/assembly capability to perform its intended function. The management organization responsible for formulating and implementing the verification program is introduced. It also identifies the controls which will monitor and track the verification program. Integral with the design and certification of the SRM are other pieces of equipment used in transportation, handling, and testing which influence the reliability and maintainability of the SRM configuration. The certification of this equipment is also discussed.

Source record↗