Search NASA⌕ Search

SEARCH · Search NASA

Results for “rate structures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Elucidating Cathode Degradation Mechanisms in LiNi 0.8 Mn 0.1 Co 0.1 O 2 (NMC811)/Graphite Cells Under Fast Charge Rates Using Operando Synchrotron Characterization

Li-ion batteries capable of extreme fast charging (XFC) are in demand to facilitate widespread electric vehicle (EV) adoption. While the impact of fast charge on the negative electrode has been studied, degradation of state-of-the-art NMC811 under XFC conditions has not been studied in detail. Herein, cathode degradation is probed in NMC811/graphite batteries by analysis of structural and chemical changes for recovered samples previously cycled under XFC conditions and during typical cycling. NMC surface reconstruction, as determined by soft X-ray absorption, was not detected for recovered electrodes. Furthermore, bulk redox activity from X-ray absorption near edge structure measurements showed more change in the oxidation state of Ni and Co under the 1C charge rate compared to the 4C rate consistent with the electrochemistry. Increased unit cell volume contraction under the 1C rate as determined by operando X-ray diffraction suggests that higher charge rates may provide a protective effect on the cathode by reducing structural distortion due to less delithiation.

25 ENERGY STORAGE↗
DOE OSTI2020

Mechanochemical Regulation of Oxidative Addition to a Palladium(0) Bisphosphine Complex

Here, we report the effect of force applied to the biaryl backbone of a bisphosphine ligand on the rate of oxidative addition of bromobenzene to a ligand-coordinated palladium center. Local compressive and tensile forces on the order of 100 pN were generated using a stiff stilbene force probe. A compressive force increases the rate of oxidative addition, whereas a tensile force decreases the rate, relative to that of the parent complex of strain-free ligand. Rates vary by a factor of ~6 across ~340 pN of force applied to the complexes. The crystal structures and DFT calculations support that force-induced perturbation of the geometry of the reactant is negligible. The force-rate relationship observed is mainly attributed to the coupling of force to nuclear motion comprising the reaction coordinate. These observations inform the development of catalysts whose activity can be tuned by an external force that is adjusted within a catalytic cycle.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Fundamental flow characterization for LiCl–KCl molten salt natural circulation closed loop

Molten salt flow characterization presents numerous challenges due to the hostile environments that cause corrosion and erosion of instrumentation and structural components. To support future molten salt flow characterization under natural convection conditions, a LiCl–KCl eutectic molten salt loop was designed and constructed. The primary objective of this loop is to facilitate natural convection as the principal cooling mechanism, enabling insights into the physics behind natural convection in closed loops and serving as a baseline for loop dimensional and non-dimensional analyses. Here, this study summarizes the fundamental functions employed for flow characterization and introduces a model to estimate flow rate when intrusive instrumentation is unavailable. The approach relies solely on structural surface measurements to avoid flow disturbances. Furthermore, a comprehensive thermal–hydraulic analysis is included to deepen understanding of the system’s behavior.

22 - GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2022

Ab-initio Cu alloy design for high-gradient accelerating structures

Operation of normal conducting accelerator structures at high accelerating gradients is beneficial for many accelerator applications in basic science, industry, medicine, and National Security. RF breakdown is the major factor that limits the achievable accelerating gradients. Previous experiments on copper (Cu) have demonstrated that RF breakdown probability can be significantly decreased by hardening the material and alloying Cu with solutes such as silver (Ag). In this paper, we propose a figure-of-merit (FOM) that characterizes the ability of Cu alloys to withstand high-gradients. The FOM represents a trade-off between hardening through solid solution strengthening and the additional thermal stress induced by incremental RF pulse heating resulting from changes in electronic properties induced by alloying. We performed high-throughput ab initio calculations and computed the FOM for a large number of binary Cu alloys. Several promising candidate alloys for high-gradient accelerating structures were identified, such as CuAg, CuCd, CuHg, CuAu, CuIn, and CuMg. CuAg alloys have previously exhibited low RF breakdown rates in experiments. The results provide guidance for selecting alloys for the future high-gradient normal conducting accelerating structures operating at very high gradients.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Enhancing Interlayer Charge Transport of Two-Dimensional Perovskites by Structural Stabilization via Fluorine Substitution

Two-dimensional lead-halide perovskites provide a more robust alternative to three-dimensional perovskites in solar energy and optoelectronic applications due to increased chemical stability afforded by interlayer ligands. At the same time, the ligands create barriers for interlayer charge transport, reducing device performance. Using a recently developed ab initio simulation methodology, we demonstrate that ligand fluorination can enhance both hole and electron mobility by 1–2 orders of magnitude. The simulations show that the enhancement arises primarily from improved structural order and reduced thermal atomic fluctuations in the system rather than increased interlayer electronic coupling. Arising from stronger hydrogen bonding and dipolar interactions, the higher structural stability decreases the reorganization energy that enters the Marcus formula and increases the charge transfer rate. The detailed atomistic insights into the electron and hole transfer in layered perovskites indicate that the use of interlayer ligands that make the overall structure more robust is beneficial simultaneously for chemical stability and charge transport, providing an important guideline for the design of new, efficient materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Mechanical Toughening of Two-Dimensional Covalent Organic Frameworks Enabled by Graphene-Based Sandwich-Structured Nanocomposites

Low resistance to fracture in two-dimensional covalent organic frameworks (2D COFs) limits their practical applications, especially in mechanically demanding fields, such as flexible electronics and sensing devices. We address this critical limitation by fabricating a sandwich-structured nanocomposite consisting of graphene layers sandwiched between 2D COF layers (2D COFs/graphene/2D COFs) via chemical vapor deposition. Here, our sandwich-structured nanocomposites exhibit a remarkable improvement in modulus E, fracture toughness K IC , and critical energy release rate G C compared to pure 2D COFs. This enhancement is likely due to the graphene layers as the backbone of the sandwich structure effectively carrying and redistributing mechanical stress within the nanocomposite. Our findings demonstrate that a sandwich structure can improve the mechanical robustness of a 2D COF so that it can preserve the functionality and mechanical integrity for applications in stretchable electronics.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Evolution of nontrivial Fermi surface features in the band structures of the homologous members Pb 5 Bi 6 Se 14 and Pb 5 Bi 12 Se 23

High-quality single crystals of (PbSe) 5 (Bi 2 Se 3 ) 3m were grown and analyzed by nuclear magnetic resonance (NMR) spectroscopy. We report on 77 Se and 207 Pb NMR shifts and nuclear spin-lattice relaxation measurements in the naturally formed heterostructure homology (PbSe) 5 (Bi 2 Se 3 ) 3m with m = 1 (Pb 5 Bi 6 Se 14 ) and m = 2 (Pb 5 Bi 12 Se 23 ). A distinct site-specific contribution has been detected for both nuclei as a function of temperature, which reveals an electronic changeover from a semiconducting (Pb 5 Bi 6 Se 14 ) to a semimetalliclike (Pb 5 Bi 12 Se 23 ) system with nontrivial band structure features near the Fermi level. The temperature dependences of the relaxation rates are dominated by significant changes in the topology of energy dispersions accompanied with band edges and crossings in the region of the Fermi surface. These results, which interrogate nuclear spin interactions from selected atomic sites, clearly expose the effects of the added Bi 2 Se 3 layer on the crystal and electronic structure of (Pb 5 Bi 12 Se 23 ). These findings provide direct microscopic insight into the unconventional and dual nature of the electronic structure of these homologous thermoelectric and topologically nontrivial compounds.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2026

Bench-Scale Development of Promoted High-Capacity Structured Sorbents (Final Technical Report)

The project objective was to develop high-capacity structured sorbent capable of achieving low CO 2 removal from air. The sorbent framework consists of an amine-functionalized onto hydrophobic polymer backbone with an added promoter. The functionalized amine provides high CO 2 capacity and adsorption rates and the polymer backbone to reduce water uptake. For the sorbent development, multiple functionalized amines and promoters were assessed to select a candidate that achieved high CO 2 capacity, high adsorption rate, and high stability. A sorbent-coated filter design was selected as the structured sorbent, which provides high sorbent loading capacity and contains an electrically conductive nonwoven filter substrate that can be Joule-heated to provide efficient utilization of available electricity for sorbent regeneration. A commercial partner operated a pilot filter manufacturing line to produce the filter panels coated with the developed sorbent. A 1 kg CO 2 /day bench unit was designed and fabricated to test the structured filter sorbent. The key achievements from the structured sorbent development activity were demonstrating that existing filter industrial-scale processes can be used for manufacturing Susteon’s structured sorbent and completing a proof-of-concept demonstration of the commercially manufactured structured sorbent filters for CO 2 capture from air with direct, Joule-heated regeneration. A techno-economic assessment with sensitivity analysis was conducted on a 100,000 TPY facility with 85% operating capacity. Through sorbent optimization and process design improvements, it is estimated that the cost of capture was reduced from $\$$349/tCO 2 to $\$$241/tCO 2 . The TEA projects further reductions to $165/tCO 2 through enhancements in CO 2 adsorption rate and sorbent capacity and reducing manufacturing and scale up risks. A life cycle analysis was conducted on the same 100,000 TPY facility and confirmed that the facility’s electricity demand drives its greenhouse gas impact. It was determined that electricity supplied through the current grid mix would result in net-positive CO 2 emissions and that achieving net-negative emissions is only possible by powering the system with renewable electricity or fossil fuel sources equipped with carbon capture and sequestration.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Enhancing the Reaction Kinetics and Stability of Co‐Free Li‐Rich Cathode Materials via a Multifunctional Strategy

Co-free Li-rich layered oxides (CFLLOs) with anionic redox activity are among the most promising cathode materials for high-energy-density and low-cost lithium-ion batteries (LIBs). However, irreversible oxygen release often causes severe structural deterioration, electrolyte decomposition, and the formation of unstable cathode-electrolyte interface (CEI) film with high impedance. Additionally, the elimination of cobalt elements further deteriorates the reaction kinetics, leading to reduced capacity and poor rate performance. Here, in this study, a multifunctional strategy is proposed, incorporating Li 2 MnO 3 phase content regulation, micro-nano structure design, and heteroatom substitution. The increased content of Li 2 MnO 3 phase enhances the capacity through oxygen redox. The smaller nanoscale primary particles induce greater tensile strain and introduce more grain boundaries, thereby improving the reaction kinetics and reactivity, while the larger micron-sized secondary particles help to reduce interfacial side reactions. Furthermore, Na⁺ doping modulates the local coordination environment of oxygen, stabilizing both the anion framework and the crystal structure. As a result, the designed cathode exhibits enhanced rate performance, delivering a capacity of 158 mAh g⁻¹ at 5.0 C and improved cyclic stability, with a high capacity retention of 99% after 400 cycles at 1.0 C. This multifunctional strategy holds great promise for advancing the practical application of CFLLOs in next-generation LIBs.

Co-free Li-rich layered oxide↗
DOE OSTI2021

Dioxygen Activation Kinetics over Distinct Cu Site Types in Cu-Chabazite Zeolites

Cu-exchanged zeolites activate dioxygen to form active sites for partial methane oxidation (PMO), nitrogen oxide decomposition, and carbon monoxide oxidation. Apparent rates of O 2 activation depend both on the intrinsic kinetics of distinct Cu site types and the distributions of such sites within a given zeolite, which depend on the density and arrangement of the framework Al atoms. In this work, we use hydrothermal synthesis methods to control the arrangement of framework Al sites in chabazite (CHA) zeolites and, in turn, the distinct Cu site types formed. Time-resolved in situ Raman spectroscopy reveals the kinetics of O 2 adsorption and activation within these well-defined Cu-CHA materials and the concomitant structural evolution of copper–oxygen (Cu x O y ) complexes, which are interpreted alongside Cu(I) oxidation kinetics extracted from in situ X-ray absorption spectroscopy (XAS). Raman spectra of several plausible Cu x O y species simulated using density functional theory suggest that experimental spectra (λ ex = 532 nm) capture the formation of mono(μ-oxo)dicopper species (ZCuOCuZ). Transient experiments show that the timescales required to form Cu x O y structures that no longer change in Raman spectra correspond to the durations of oxidative treatments that maximize CH 3 OH yields in stoichiometric PMO cycles (approximately 2 h). Yet, these periods extend well beyond the timescales for the complete conversion of the initial Cu(I) intermediates to their Cu(II) states (<0.3 h, reflected in X-ray absorption near edge spectroscopy spectra), which demonstrates that Cu x O y complexes continue to evolve structurally following rapid Cu(I) oxidation. The dependence of ZCuOCuZ formation rates on O 2 pressure, H 2 O pressure, and temperature is consistent with a mechanism in which ZCuOH reduces to form ZCu + sites that bind molecular oxygen and form ZCu-O 2 intermediates. Subsequent reaction with proximate ZCu + forms bridging peroxo dicopper complexes that cleave O–O bonds to form ZCuOCuZ in steps facilitated by water. These data and interpretations provide evidence for the chemical processes that link rapid and kinetically irrelevant Cu oxidation steps (frequently probed by XAS and UV–vis spectroscopy) to the relatively slow genesis of reactive Cu complexes that form CH 3 OH during PMO. In doing so, we reveal previously unrecognized complexities in the processes by which Cu ions in zeolites activate O 2 to form active Cu x O y complexes, which underscore the insight afforded by judicious combinations of experimental and theoretical techniques.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Structural and Electronic Properties of Indium-Doped n-type Cd-Se-Te Crystals

Here, we present a comprehensive investigation into the potential of n-type indium-doped cadmium selenide telluride (CST:In) as a high-performance candidate for solar cell applications, without the need for resource-intensive post-growth treatments that are required for CdTe:In. We compared undoped CST and CST:In crystals under different growth conditions, analyzing their structural and electronic properties using x-ray diffraction (XRD), electron probe microanalysis (EPMA), current-voltage (IV) and Hall effect measurements, time-resolved photoluminescence (TRPL), optical transmission, and photoluminescence (PL) mapping. The results reveal that as-grown CST:In crystals achieve nearly 100% carrier activation, yielding an electron concentration of 9.5x1018 cm -3 , mobility of 653 cm 2 /V.s and a 5 ns lifetime which approaches the radiative limit. Furthermore, comparison of PL maps from crystal growths having different cooling profiles suggests a strong effect of cooling rate on selenium segregation and cubic/hexagonal/polytype phase distribution. Slower cooling leads to a more homogeneous cubic structure with lower Se segregation, while a faster cooling rate results in increased Se segregation, and twin boundaries and stacking faults with polytypic and hexagonal character.

14 SOLAR ENERGY↗
DOE OSTI2024

Effects of Calcination Conditions on the Structural and Electrochemical Behaviors of High‐Nickel, Cobalt‐Free LiNi 0.9 Mn 0.1 O 2 Cathode

Abstract Eliminating cobalt from high‐nickel layered oxide cathodes lowers the cost of lithium‐ion batteries for electric vehicles. However, cobalt‐free cathodes with high Mn 4+ and Ni 2+ contents are prone to Li/Ni mixing after synthesis, potentially compromising battery energy density, rate capability, and cycling stability. Without cobalt facilitating cation ordering in the layered structure, the degree of Li/Ni mixing in cobalt‐free cathodes depends heavily on the calcination conditions. In this study, a systematic exploration of calcination temperatures and LiOH ratio for LiNi 0.9 Mn 0.1 O 2 (NM‐90) provides detailed insights into the optimal synthesis conditions for high‐capacity cobalt‐free cathodes with extended cycle life. Surprisingly, high Li/Ni mixing does not necessarily lead to poor cycling stability whereas low Li/Ni mixing does not guarantee a long cycle life. More importantly, although excessive calcination temperature can further decrease Li/Ni mixing, it does not necessarily enhance capacity. Instead, the pernicious effects from the H2 → H3 phase transition are amplified due to a pronounced two‐phase reaction. An extensive suite of chemical and structural characterization methods uncovers a correlation between elevated calcination temperature, phase transformation, cation ordering, and capacity fading behavior: “overcooking” high‐nickel, cobalt‐free cathodes induce structural arrangement toward that of LiNiO 2 , with exacerbated lattice distortion and surface instability accelerating capacity fade.

Lee, Steven↗
DOE OSTI2020

Hydration and reaction mechanisms on sodium silicate glass surfaces from molecular dynamics simulations with reactive force fields

Recent development of reactive force fields have enabled molecular dynamics simulations of interactions between silicate glasses and water at the atomistic scale. While multicomponent silicate glasses encompass a wide variety of compositions and properties, one common structural feature in these glasses is the combination of the network structure that is made up of silica tetrahedra linked through corner sharing interspersed with network modifiers like alkali and alkaline-earth ions that break up the Si–O–Si linkages by forming nonbridging oxygen. In reactions with water, ion exchange between alkali ions in the glass and proton or hydronium in the solution, as well as hydrolysis reaction of the Si–O–Si linkages and subsequent silanol formation, is observed and well documented. Furthermore, we have used a set of recently developed reactive force field to investigate the reactions between water and the surfaces of silica and sodium silicate glasses of different compositions for reactions up to 8 nanoseconds. Our results indicate sodium leaching into water and diffusion of water molecules up to 25 Å into the glass surface. We examined the structural and compositional changes inside the glass and around the diffused ions and use these to explain the rates of silanol formation at the surface. We also observed proton transport in the glass which has an indirect influence on the silanol formation rates. While the surface of the glass was rough to start with, it undergoes further modification into a hydrated gel-like structure in the glass for up to 5 Å in the higher alkali containing glasses. It was found that the leached sodium ions remain close to the interface and that fragments of silicate network from the surface is capable of dislodging from the bulk glass and enter the aqueous solution. These simulations thus provide insights into the formation and structure of an alteration layers commonly observed in multicomponent silicate glasses corroded in aqueous solutions.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Defining the scope for altering rice leaf anatomy to improve photosynthesis: a modelling approach

Summary Leaf structure plays an important role in photosynthesis. However, the causal relationship and the quantitative importance of any single structural parameter to the overall photosynthetic performance of a leaf remains open to debate. In this paper, we report on a mechanistic model, eLeaf, which successfully captures rice leaf photosynthetic performance under varying environmental conditions of light and CO 2 . We developed a 3D reaction‐diffusion model for leaf photosynthesis parameterised using a range of imaging data and biochemical measurements from plants grown under ambient and elevated CO 2 and then interrogated the model to quantify the importance of these elements. The model successfully captured leaf‐level photosynthetic performance in rice. Photosynthetic metabolism underpinned the majority of the increased carbon assimilation rate observed under elevated CO 2 levels, with a range of structural elements making positive and negative contributions. Mesophyll porosity could be varied without any major outcome on photosynthetic performance, providing a theoretical underpinning for experimental data. eLeaf allows quantitative analysis of the influence of morphological and biochemical properties on leaf photosynthesis. The analysis highlights a degree of leaf structural plasticity with respect to photosynthesis of significance in the context of attempts to improve crop photosynthesis.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Linear convergence of accelerated conditional gradient algorithms in spaces of measures

A class of generalized conditional gradient algorithms for the solution of optimization problem in spaces of Radon measures is presented. The method iteratively inserts additional Dirac-delta functions and optimizes the corresponding coefficients. Under general assumptions, a sub-linear [see formula in PDF] rate in the objective functional is obtained, which is sharp in most cases. To improve efficiency, one can fully resolve the finite-dimensional subproblems occurring in each iteration of the method. We provide an analysis for the resulting procedure: under a structural assumption on the optimal solution, a linear [see formula in PDF] convergence rate is obtained locally.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

Characterization and structure of the human lysine-2-oxoglutarate reductase domain, a novel therapeutic target for treatment of glutaric aciduria type 1

In humans, a single enzyme 2-aminoadipic semialdehyde synthase (AASS) catalyses the initial two critical reactions in the lysine degradation pathway. This enzyme evolved to be a bifunctional enzyme with both lysine-2-oxoglutarate reductase (LOR) and saccharopine dehydrogenase domains (SDH). Moreover, AASS is a unique drug target for inborn errors of metabolism such as glutaric aciduria type 1 that arise from deficiencies downstream in the lysine degradation pathway. While work has been done to elucidate the SDH domain structurally and to develop inhibitors, neither has been done for the LOR domain. Here, we purify and characterize LOR and show that it is activated by alkylation of cysteine 414 by N-ethylmaleimide. We also provide evidence that AASS is rate-limiting upon high lysine exposure of mice. Finally, we present the crystal structure of the human LOR domain. Our combined work should enable future efforts to identify inhibitors of this novel drug target.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Understanding the Role of π-Conjugated Polymers as Binders in Enabling Designs for High-Energy/High-Rate Lithium Metal Batteries

Developing lithium-ion batteries with both high specific energy and high-power capability is a challenging task because of the necessity for meeting conflicting design requirements. We show that high-energy and high-rate capability can be achieved by using various π -conjugated p-dopable polymers as binders at the cathode and by lowering the mass fraction of all the inactive components of the cell. We report a lithium-metal battery that can deliver 320 Wh kg −1 at C/2 using a mass-efficient cell design. To this end, three conducting polymers with different ionic and electronic conductivities have been studied; dihexyl-substituted poly(3,4-propylenedioxythiophene) (PProDOT-Hx 2 ), poly(3-hexylthiophene) (P3HT), and a new Random Copolymer (Hex:OE)(80:20) PProDOT. These conducting polymers are compared against a conventional polymer binder, PVDF. We show that under the mass-efficient conditions required for achieving high specific energy and rate capability, the conducting polymers play a crucial role by providing electronic and ionic conductivity, protection against rapid growth of solid electrolyte interphase (SEI), and access to a large electrochemically active surface area. Thus, the use of conducting polymers with appropriate molecular structure as binders opens a viable pathway to maximizing the specific energy and rate capability of lithium-ion battery cathodes.

25 ENERGY STORAGE↗
DOE OSTI2020

High resolution time- and angle-resolved photoemission spectroscopy with 11 eV laser pulses

Performing time- and angle-resolved photoemission (tr-ARPES) spectroscopy at high momenta necessitates extreme ultraviolet laser pulses, which are typically produced via high harmonic generation (HHG). Despite current advances, HHG-based setups still require large pulse energies (from hundreds of μ J to mJ) and their energy resolution is limited to tens of meV. Here, we present a novel 11 eV tr-ARPES setup that generates a flux of 5 × 10 10 photons/s and achieves an unprecedented energy resolution of 16 meV. It can be operated at high repetition rates (up to 250 kHz) while using input pulse energies down to 3 µ J. We demonstrate these unique capabilities by simultaneously capturing the energy and momentum resolved dynamics in two well-separated momentum space regions of a charge density wave material ErTe 3 . This novel setup provides the opportunity to study the non-equilibrium band structure of solids with exceptional energy and time resolutions at high repetition rates.

47 OTHER INSTRUMENTATION↗