Search NASA⌕ Search

SEARCH · Search NASA

Results for “reverse phasing system”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

The Impact of Inverter Dead-Time in Single-Phase Wireless Power Transfer Systems

In this paper, the effect of the dead-time on a single-phase wireless power transfer system is studied in detail. In practice, the dead-time is always placed between the complementary switching pulses of the inverter phase-leg. At higher operating frequencies, the dead-time issues in the resonant inverter become critical, especially as the power level increases. The detailed analysis of the dead-time on a wireless power transfer system is discussed for different operating conditions of the inverter duty-cycle and power factor. The switching characteristics of the wireless power transfer system inverter are analyzed, and the notch phenomenon that appears at the output of the inverter is also discussed. A notch equation based on the observations is derived to predict the notch occurrence during the system operation. Furthermore, the mathematical expressions are presented for different notch conditions. Subsequently, the effect of the notches on the sensitivity and the power transfer of the series-series compensated wireless power transfer system is analyzed. Finally, the approach is verified experimentally on an 8 kW wireless power transfer system prototype, and the results are compared with the theoretical analysis.

42 ENGINEERING↗

Study of an unrefined humate solution as a possible remediation method for groundwater contamination - 15698

Savannah River Site (SRS) was one of the major nuclear processing facilities in the U.S. where plutonium was produced during the Cold War. Approximately 1.8 billion gallons of low level acidic waste solution containing radionuclides and dissolved metals were discharged to a series of unlined seepage basins at the F/H Area. Uranium is a key contaminant of concern in the basin's groundwater. It is migrating into the groundwater creating an acidic plume with a pH between 3-5.5. Groundwater Actions: The pump-and-treat water treatment unit was designed and built in 1997 to remove metals and radionuclides. In 2004 a hybrid funnel-and-gate system was constructed to create a treatment zone in which the acidic nature of the contaminated sediments could be reversed. Huma-K is an organic fertilizer that comes from the alkaline extraction of leonardite (a low-rank coal). Huma-K has a high content of humic substances which consist of complex organic compounds formed by the decomposition of plant and animal tissue. The objective of this study is to determine if a low cost unrefined humate solution (Huma-K) can be used to facilitate uranium adsorption to control its mobility in acidic groundwater. This study can assist in evaluating whether Huma-K can be used as an in situ amendment for the remediation of groundwater contaminated with uranium. Sediments from FAW-1 70-90 ft were used in this experiment. Sediments were disaggregated and sieved to a particle size of . 2 mm. Concentrations in the range 10-500 ppm were tested. Once all the components were added, pH was adjusted to 4. Samples were vortex mixed and placed on a shaker table at 100 RPM for a period of 24 hours in order to reach the adsorption equilibrium. Once the adsorption equilibrate was reached, samples were centrifuged at 2700 RPM to separate the liquid and the solid phase. The liquid fraction was analyzed using a Thermo Scientific Genesys 10S UV-Vis spectrophotometer. The same experimental design was used as explained above. A known concentration of Huma-K was used to study the pH effect on the sorption process. pH values were measured at the beginning and at the end of the experiment. Spectra of Huma-K show a featureless character. Absorbance of light increases as the wavelength is decreased. Measurements were done at 254 nm due to the presence of aromatic rings. Apparently there are two sorption processes. The first one follows the same trend as the Langmuir isotherm up to 250 ppm. The second sorption process occurs after all the binding sites in the sediments have been occupied. Precipitation decreases as the pH is increased. Based on the sorption isotherm, humic substances apparently bind first to the binding sites of the sediments particles. Once all the binding sites have been occupied, other sorption processes may start to dominate. Sorption is affected by pH. Higher sorption is seen at low pH values. Increased precipitation at low pH values is probably due to the neutralization of surface charges of humic molecules making them agglomerate.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Diesel exhaust induced pulmonary and cardiovascular impairment: The role of hypertension intervention

Exposure to diesel exhaust (DE) and associated gases is linked to cardiovascular impairments; however, the susceptibility of hypertensive individuals is poorly understood. The objectives of this study were (1) to determine cardiopulmonary effects of gas-phase versus whole-DE and (2) to examine the contribution of systemic hypertension in pulmonary and cardiovascular effects. Male Wistar Kyoto (WKY) rats were treated with hydralazine to reduce blood pressure (BP) or L-NAME to increase BP. Spontaneously hypertensive (SH) rats were treated with hydralazine to reduce BP. Control and drug-pretreated rats were exposed to air, particle-filtered exhaust (gas), or whole DE (1500 μg/m{sup 3}), 4 h/day for 2 days or 5 days/week for 4 weeks. Acute and 4-week gas and DE exposures increased neutrophils and γ-glutamyl transferase (γ-GT) activity in lavage fluid of WKY and SH rats. DE (4 weeks) caused pulmonary albumin leakage and inflammation in SH rats. Two-day DE increased serum fatty acid binding protein-3 (FABP-3) in WKY. Marked increases occurred in aortic mRNA after 4-week DE in SH (eNOS, TF, tPA, TNF-α, MMP-2, RAGE, and HMGB-1). Hydralazine decreased BP in SH while L-NAME tended to increase BP in WKY; however, neither changed inflammation nor BALF γ-GT. DE-induced and baseline BALF albumin leakage was reduced by hydralazine in SH rats and increased by L-NAME in WKY rats. Hydralazine pretreatment reversed DE-induced TF, tPA, TNF-α, and MMP-2 expression but not eNOS, RAGE, and HMGB-1. ET-1 was decreased by HYD. In conclusion, antihypertensive drug treatment reduces gas and DE-induced pulmonary protein leakage and expression of vascular atherogenic markers. - Highlights: ► Acute diesel exhaust exposure induces pulmonary inflammation in healthy rats. ► In hypertensive rats diesel exhaust effects are seen only after long term exposure. ► Normalizing blood pressure reverses lung protein leakage caused by diesel exhaust. ► Normalizing blood pressure reverses atherogenic effects of diesel exhaust. ► Diesel exhaust and hydralazine cause similar aorta effect on vascular tone markers.

60 APPLIED LIFE SCIENCES↗

Attenuating Sulfidogenesis in a Soured Continuous Flow Column System With Perchlorate Treatment

Hydrogen sulfide production by sulfate reducing bacteria (SRB) is the primary cause of oil reservoir souring. Amending environments with chlorate or perchlorate [collectively denoted (per)chlorate] represents an emerging technology to prevent the onset of souring. Recent studies with perchlorate reducing bacteria (PRB) monocultures demonstrated that they have the innate capability to enzymatically oxidize sulfide, thus PRB may offer an effective means of reversing souring. (Per)chlorate may be effective by (i) direct toxicity to SRB; (ii) competitive exclusion of SRB by PRB; or (iii) reversal of souring through re-oxidation of sulfide by PRB. To determine if (per)chlorate could sweeten a soured column system and assign a quantitative value to each of the mechanisms we treated columns flooded with San Francisco bay water with temporally decreasing amounts (50, 25, and 12.5 mM) of (per)chlorate. Geochemistry and the microbial community structure were monitored and a reactive transport model was developed, Results were compared to columns treated with nitrate or untreated. Souring was reversed by all treatments at 50 mM but nitrate-treated columns began to re-sour when treatment concentrations decreased (25 mM). Re-souring was only observed in (per)chlorate-treated columns when concentrations were decreased to 12.5 mM and the extent of re-souring was less than the control columns. Microbial community analyses indicated treatment-specific community shifts. Nitrate treatment resulted in a distinct community enriched in genera known to perform sulfur cycling metabolisms and genera capable of nitrate reduction. (Per)chlorate treatment enriched for (per)chlorate reducing bacteria. (Per)chlorate treatments only enriched for sulfate reducing organisms when treatment levels were decreased. A reactive transport model of perchlorate treatment was developed and a baseline case simulation demonstrated that the model provided a good fit to the effluent geochemical data. Subsequent simulations teased out the relative role that each of the three perchlorate inhibition mechanisms played during different phases of the experiment. These results indicate that perchlorate addition is an effective strategy for both souring prevention and souring reversal. It provides insight into which organisms are involved, and illuminates the interactive effects of the inhibition mechanisms, further highlighting the versatility of perchlorate as a sweetening agent.

02 PETROLEUM↗

Monitoring morphology evolution within block copolymer microparticles during dispersion polymerisation in supercritical carbon dioxide: a high pressure SAXS study

Reversible addition-fragmentation chain transfer (RAFT) dispersion polymerisation in supercritical carbon dioxide is an effective process for creating block copolymer microparticles with internal nanostructures. Here we report an alternative synthesis route involving completely independent steps by exploiting the livingness of RAFT-terminated PMMA microparticles and their unique ability to be redispersed in scCO 2 . This not only enables a series of block copolymers to be created from a single RAFT dispersion synthesised PMMA homopolymer batch, thus improving reproducibility, but also adds flexibility by allowing the time and concentration requirements for each stage to be decoupled. The internal morphology development and evolution for a series of poly(methyl methacrylate-block-styrene) (PMMA-b-PS) block copolymer microparticles synthesised via this route was monitored via in situ small-angle X-ray scattering (SAXS) using an autoclave with diamond windows. Together with offline kinetics experiments and post-mortem transmission electron microscopy imaging, this study provides remarkably detailed insights into block copolymer self-organisation phenomena in scCO 2 . Specifically, the time period over which this block copolymer undergoes phase separation before progressing from an arrangement of spheres to lamellae via the hexagonal cylinder phase is elucidated, and the data are used to plot a detailed empirical phase diagram for this block copolymer system in scCO 2 .

36 MATERIALS SCIENCE↗

Analysis of Potential-Induced Degradation in Soda-Lime Glass and Borosilicate-Glass Cu(In,Ga)Se 2 Samples

In this study, potential-induced degradation (PID) is investigated in small-size Cu(In,Ga)Se 2 (CIGS) submodules of individual cells. Samples with conventional soda-lime glass (SLG) and low-alkaline glass (borosilicate glass, BSG) were analyzed applying positive and negative 1000 V bias at 85 degrees C and low relative humidity after a heat-soaking phase. During the heat-soaking phase, BSG samples showed degradation, with variations in their dark current-voltage (I-V) curve parameters compared with the stability of SLG samples. During the PID stress phase, back-grounded SLG samples with -1000 V applied to the cell experienced fast degradation, with complete failure in 25 h, whereas, BSG samples only showed changes because of the dark heat environment. When grounded on their front face, SLG samples remained stable during more than 150 h of PID testing, beginning degradation after longer applications of stress. The analysis of the dark I-V curves of SLG samples through the single-diode model showed that an increase in saturation current J 0 occurs first, attributed to Na + ions migrating into the CdS/ZnO layer; later, a decrease in shunt resistance occurs. Lastly, the application of the model in BSG samples showed an increase in series resistance evaluated at 25 degrees C. When the bias is reversed, SLG samples gradually recover their performance.

14 SOLAR ENERGY↗

Theoretical Screening of Mixed Solid Sorbent for Applications to CO{sub 2} Capture Technology

Since current technologies for capturing CO{sub 2} to fight global climate change are still too energy intensive, there is a critical need for development of new materials that can capture CO{sub 2} reversibly with acceptable energy costs. Accordingly, solid sorbents have been proposed to be used for CO{sub 2} capture applications through a reversible chemical transformation. By combining thermodynamic database mining with first principles density functional theory and phonon lattice dynamics calculations, a theoretical screening methodology to identify the most promising CO{sub 2} sorbent candidates from the vast array of possible solid materials has been proposed and validated. The calculated thermodynamic properties of different classes of solid materials versus temperature and pressure changes were further used to evaluate the equilibrium properties for the CO{sub 2} adsorption/desorption cycles. According to the requirements imposed by the pre- and post- combustion technologies and based on our calculated thermodynamic properties for the CO{sub 2} capture reactions by the solids of interest, we were able to screen only those solid materials for which lower capture energy costs are expected at the desired pressure and temperature conditions. Only those selected CO{sub 2} sorbent candidates were further considered for experimental validations. The ab initio thermodynamic technique has the advantage of identifying thermodynamic properties of CO{sub 2} capture reactions without any experimental input beyond crystallographic structural information of the solid phases involved. Such methodology not only can be used to search for good candidates from existing database of solid materials, but also can provide some guidelines for synthesis new materials. In this presentation, we apply our screening methodology to mixing solid systems to adjust the turnover temperature to help on developing CO{sub 2} capture Technologies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ag Nanoparticles Supported on Yttria-Stabilized Zirconia: A Synergistic System within Redox Environments

In this paper, we report a distinctive dynamic sintering-free redox behavior of Ag nanoparticles (AgNPs) on 30 nm thick yttria-stabilized zirconia (YSZ) films. The material system demonstrates reversible 200 nm shifts in the plasmonic spectra with an unprecedented particle phase/size/morphology oscillation during cyclic redox reactions in air and hydrogen/air at 300–400 °C. This is in significant contrast to the minor changes more commonly observed for AgNPs on quartz. It was found that the ionically active YSZ has a strong tendency to drive AgNPs to oxidize under oxidizing conditions, and upon surface oxidation a large differential surface energy is built up, forcing the core/shell particles to migrate and coalesce toward a lower system free energy. Most strikingly, once switched to a mixture of H 2 and air, the previously formed large dewetted metal-core/thick oxide-shell particles collapse, and new small Ag nanoparticles quickly form and remain in a highly dispersed and sintering-free state on YSZ. This is found to likely be due to catalytic production of water over the material system, which plays a key role in the dynamic redox activities. It is hypothesized that the small metallic particle regeneration and sinter-free behavior take place through a four-step process resulting from the synergistic behavior of AgNPs supported on YSZ within a redox environment: (I) production of a local humid environment via catalytic reactions of H 2 and O 2 mostly at the triple-phase boundary, (II) dissolution of Ag + from both reduced Ag and the AgO x shell, (III) collapse and spillover of the AgO x shell/water layer with Ag ions onto the hydrous YSZ surface, and (IV) reduction, diffusion, nucleation, and growth to new small metallic AgNPs with a dynamic equilibrium quickly reached. As a result, the findings behind this novel system could set up an avenue for a new concept of catalysts operating in a self-controlled dynamic regime for governing chemical reactions via metal and ceramic synergized catalysis with high activities and stabilities.

08 HYDROGEN↗

Clinical features of suspected Ebola cases referred to the Moyamba ETC, Sierra Leone: challenges in the later stages of the 2014 outbreak

Background: The last ebola virus disease (EVD) outbreak has been the most important since 1976. EVD cases decreased drastically in Sierra Leone at the beginning of 2015. We aim to determine the clinical findings and evolution of patients admitted to an Ebola treatment center (ETC) during the epidemic’s late phase. Methods: We analyze retrospectively data of patients admitted to the Moyamba ETC (December 2014-March 2015). Patients were classified in EVD or non-EVD patients according to the results of Ebola virus real-time reverse transcription polymerase chain reaction (ZAIRE-RT-PCR). Results: Seventy-five patients were included, 41.3 % were positive for ZAIRE-RT-PCR. More women (68 % vs 28 %, p = 0.001) were EVD-positive. More EVD patients had previous contact with an Ebola patient (74.2 % vs 36.3 %, p < 0. 001). At admission, EVD patients were more likely to have fatigue (96.7 %, p < 0.001), diarrhea (67.7 %, p = 0.002), and muscle pain (61.3 %, p = 0.009); but only objective fevers in 35.5 % of EVD patients. The most reliable criteria for diagnosis were: contact with an Ebola patient plus three WHO symptoms (LR + =3.7, 95 % CI = 1.9–7.3), and positive contact (LR + =2.3, 95 % CI = 1.15–4.20). Only 45.2 % of EVD patients developed fevers during stay, but 75 % developed gastrointestinal symptoms. Non-EVD patients had gastrointestinal problems (33 %), respiratory conditions (26.6 %), and others such as malaria, HIV or tuberculosis with a mortality rate of 11.4 %. vs 58 % in EVD group (p < 0.001). Conclusions: More non-EVD patients were admitted in the outbreak’s late phases. The low percentage of initial fever highlights the need to emphasize the epidemiological information. EVD patients presented new symptoms getting worse and requiring closer follow-up. Diagnoses of non-EVD patients were diverse with a remarkable mortality, presenting a challenge for the health system.

60 APPLIED LIFE SCIENCES↗

New precious metal containing normal spinels: LiRhRu 1-x Ir x O 4 , LiFeIr 1-x Ru x O 4 , and LiCoIr 1-x Ru x O 4

Large spin-orbit-coupled cations in geometrically frustrated crystal structures have the most suitable setting for exploring novel exotic states of matter. Spinel oxides (AM 2 O 4 ) are well-known examples of geometrically frustrated systems. In this study, we report for the first time the synthesis of compositions LiRhRu 1-x Ir x O 4 (x = 0–0.5), LiFeIr 1-x Ru x O 4 (x = 0–0.5), and LiCoIr 1-x Ru x O 4 (x = 0–0.3) containing precious metal cations on edge-sharing octahedral M-sites, and systematically investigate their magnetic and electrical properties. 57 Fe Mössbauer spectroscopy revealed that iron is trivalent in all LiFeIr 1-x Ru x O 4 solid solutions. Magnetic measurements indicate deviations from theoretical spin-only magnetic moment values, indicating the influence of spin-orbit coupling owing to the presence of 4d and 5d block elements. The LiFeIr 1-x Ru x O 4 series shows spin-glass-like freezing behavior with T g ≈ 20 K, and a small frustration index (f ≈ 1-2), indicating that the frustration originates from site disorder. LiRhRu 1-x Ir x O 4 and LiCoIr 1-x Ru x O 4 exhibit strongly geometrically frustrated magnetism. Electrical resistivity measurements as a function of temperature indicate that all phases are semiconducting. Seebeck coefficient measurements show that LiRhRu 1-x Ir x O 4 and LiFeIr 1-x Ru x O 4 are p-type semiconductors with holes as the major charge carriers. A sign reversal of the Seebeck coefficient indicates both holes and electrons as carriers for LiCoIr 1-x RuxO 4 (x = 0–0.2), but only holes as major carriers for x = 0.3. Here, the Seebeck coefficient and power factor increase drastically in the LiRhRu 1-x Ir x O 4 solid solution with Ir substitution, reaching a maximum of ≈ +125 μV/K and ≈2.3×10 -6 W/mK 2 at ∼650 K for x = 0.5.

Charge carriers↗

He I D3 OBSERVATIONS OF THE 1984 MAY 22 M6.3 SOLAR FLARE

The He I D3 line has a unique response to a flare impact on the low solar atmosphere and can be a powerful diagnostic tool for energy transport processes. Using images obtained from the recently digitized films of the Big Bear Solar Observatory, we report D3 observations of the M6.3 flare on 1984 May 22, which occurred in an active region with a circular magnetic polarity inversion line (PIL). The impulsive phase of the flare starts with a main elongated source that darkens in D3, inside of which bright emission kernels appear at the time of the initial small peak in hard X-rays (HXRs). These flare cores subsequently evolve into a sharp emission strand lying within the dark halo; this evolution occurs at the same time as the main peak in HXRs, reversing the overall source contrast from -5% to 5%. The radiated energy in D3 during the main peak is estimated to be about 10{sup 30} erg, which is comparable to that carried by nonthermal electrons above 20 keV. Afterward, the flare proceeds along the circular PIL in the counterclockwise direction to form a dark circular ribbon in D3, which apparently mirrors the bright ribbons in H{alpha} and He I 10830 A. All of these ribbons last for over one hour in the late gradual phase. We suggest that the present event resembles the so-called black-light flare that was proposed based on continuum images, and that D3 darkening and brightening features herein may be due to thermal conduction heating and the direct precipitation of high-energy electrons, respectively.

79 ASTRONOMY AND ASTROPHYSICS↗

Recovery Act: Novel Oxygen Carriers for Coal-fueled Chemical Looping (Final Report: January 1 st , 2010 – February 28 th , 2013)

Chemical Looping Combustion (CLC) could totally negate the necessity of pure oxygen by using oxygen carriers for purification of CO 2 stream during combustion. It splits the single fuel combustion reaction into two linked reactions using oxygen carriers. The two linked reactions are the oxidation of oxygen carriers in the air reactor using air, and the reduction of oxygen carriers in the fuel reactor using fuels (i.e. coal). Generally metal/metal oxides are used as oxygen carriers and operated in a cyclic mode. Chemical looping combustion significantly improves the energy conversion efficiency, in terms of the electricity generation, because it improves the reversibility of the fuel combustion process through two linked parallel processes, compared to the conventional combustion process, which is operated far away from its thermo-equilibrium. Under the current carbon-constraint environment, it has been a promising carbon capture technology in terms of fuel combustion for power generation. Its disadvantage is that it is less mature in terms of technological commercialization. In this DOE-funded project, accomplishment is made by developing a series of advanced copper-based oxygen carriers, with properties of the higher oxygen-transfer capability, a favorable thermodynamics to generate high purity of CO 2 , the higher reactivity, the attrition-resistance, the thermal stability in red-ox cycles and the achievement of the auto-thermal heat balance. This will be achieved into three phases in three consecutive years. The selected oxygen carriers with final-determined formula were tested in a scaled-up 10kW coal-fueled chemical looping combustion facility. This scaled-up evaluation tests (2-day, 8-hour per day) indicated that, there was no tendency of agglomeration of copper-based oxygen carriers. Only trace-amount of coke or carbon deposits on the copper-based oxygen carriers in the fuel reactor. There was also no evidence to show the sulphidization of oxygen carriers in the system by using the high-sulfur-laden asphalt fuels. In all, the scaled-up test in 10 kW CLC facility demonstrated that the preparation method of copper-based oxygen carrier not only help to maintain its good reactivity, also largely minimize its agglomeration tendency.

20 FOSSIL-FUELED POWER PLANTS↗

Cubic hastatic order in the two-channel Kondo-Heisenberg model

Materials with non-Kramers doublet ground states naturally manifest the two-channel Kondo effect, as the valence fluctuations are from a non-Kramers doublet ground state to an excited Kramers doublet. Here, the development of a heavy Fermi liquid requires a channel-symmetry-breaking spinorial hybridization that breaks both single and double time-reversal symmetry, and is known as hastatic order. Motivated by cubic Pr-based materials with $Γ$ 3 non-Kramers ground state doublets, this paper provides a survey of cubic hastatic order using the simple two-channel Kondo-Heisenberg model. Hastatic order necessarily breaks time-reversal symmetry, but the spatial arrangement of the hybridization spinor can be either uniform (ferrohastatic) or break additional lattice symmetries (antiferrohastatic). The experimental signatures of both orders are presented in detail, and include tiny conduction electron magnetic moments. Interestingly, there can be several distinct antiferrohastatic orders with the same moment pattern that break different lattice symmetries, revealing a potential experimental route to detect the spinorial nature of the hybridization. We employ an SU( N ) fermionic mean-field treatment on square and simple cubic lattices, and examine how the nature and stability of hastatic order varies as we vary the Heisenberg coupling, conduction electron density, band degeneracies, and apply both channel and spin symmetry breaking fields. In conclusion, we find that both ferrohastatic and several types of antiferrohastatic orders are stabilized in different regions of the mean-field phase diagram, and evolve differently in strain and magnetic fields.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Amphiphile Organization in Organic Solutions: An Alternative Explanation for Small-Angle X-ray Scattering Features in Malonamide/Alkane Mixtures

In this work, the role of different intermolecular interactions in the aggregation of amphiphiles in an organic solvent is studied for systems of relevance to liquid-liquid extraction (LLE), a chemical process used to selectively recover metals from complex mixtures. Of specific interest is the role, or lack thereof, of hydrogen bonding, which is often assumed to be a main driver of the organic phase structural organization that has been linked to separation efficacy. Toward that end, a series of malonamide extractants in n-dodecane have been studied in the absence of any extracted aqueous solutes, including water. The series of extractants includes N,N'-dimethyl-N,N'-dibutyltetradecylmalonamide (DMDBTDMA), two of its homologs, and N,N'-dimethyl-N,N'-dioctylhexylethoxymalonamide (DMDOHEMA). This simplified model LLE system enables systematic investigation of the role of dipole-dipole and alkyl tail steric interactions in amphiphile aggregation. Small-angle X-ray scattering (SAXS) profiles computed from molecular dynamics trajectories are in good agreement with experimental SAXS data. Molecular dynamics simulations show that malonamide aggregation results from dipole-driven self-association and lacks characteristic aggregate sizes. Mid-q correlation peaks in the SAXS profiles emerge at high concentration for each malonamide. In those densely packed solutions, the correlation peaks are observed to result from alkyl tail-induced spacing between electron-rich polar head groups, with peak positions determined by the different alkyl tail lengths present in the malonamide molecule. This explanation of the SAXS correlation peaks contrasts with the prevailing literature, which attributes mesoscale features observed in small-angle scattering to the formation of microemulsions. Instead, this work finds that these features are present in the absence of water or any reverse micellar organization of the malonamides. As such, molecular-scale malonamide self-association and packing, rather than microemulsion-based colloidal-scale descriptions, is a more appropriate framework for these LLE systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Predictive coarse-grained (CG) modeling of morphologies in polymer nanocomposites with specific and directional intermolecular interactions (Final Report)

The overarching goal of the proposed work was to develop predictive models for investigating structure and dynamics in soft materials with chemistries that have specific and directional molecular interactions. The motivation behind studying materials with specific and directional interactions lies in the many desirable features these interactions provide when designing novel soft materials. Soft materials with specific and direction interactions (such as hydrogen bonds or H-bonds) can have a) thermally reversible phase behavior with different functions with varying temperature, b) precisely tuned nanostructure with desirable geometries that afford unique physical properties (e.g., color response, mechanical properties) and c) well-mixed/blended morphologies that are useful for variety of applications in energy field (e.g., materials for batteries require use of blended polymers where one domain gives superior mechanical properties and one domain promotes electrical conduction). Notably, biology makes extensive use of specific and directional interactions, in many cases based on H-bonds, to construct materials with precisely defined architectures and properties. Engineered soft materials with precisely tuned nanostructures and improved processiblity through thermoresponsive phase behavior are useful in numerous applications that are relevant to the Department of Energy (DOE) including high efficiency electronic devices, light-weight high-strength composite materials for batteries and fuel cells, and polymer membranes for separations, etc. While past computational studies have been tremendously useful in understanding molecular phenomena and guiding synthesis of new macromolecular soft materials for a wide variety of applications, the inability to capture small scale specific and directional interactions alongside macromolecular length and time scales represented a key limitation of most studies to date. Our work in this project addressed this grand challenge in computational materials chemistry, i.e., ability to model the anisotropic, directional, and specific interactions that govern the behavior of many macromolecular soft matter systems of interest, thus, has greatly expanded the predictive potential of simulations. Specifically the key outcomes were: successful development of new coarse-grained (CG) polymer models to study generic and specific polymer chemistries in which hydrogen-bonding interactions are dominant. These CG models were then used in molecular simulations to study structure and thermodynamics in polymer nanocomposites and blends; some studies were conducted in collaboration with experimentalists. We also published a perspective and a viewpoint which included some of the work we completed in this DOE project; we believe these perspective and viewpoint articles guide other researchers in the soft materials community on how to extend the computational approaches and models we have developed for the purposes of their studies.

36 MATERIALS SCIENCE↗

Simulation study of wave phenomena from the sheath region in single frequency capacitively coupled plasma discharges; field reversals and ion reflection

Capacitively coupled radio-frequency (RF) discharges have great significance for industrial applications. Collisionless electron heating in such discharges is important, and sometimes is the dominant mechanism. This heating is usually understood to originate in a stochastic interaction between electrons and the electric fields. However, other mechanisms may also be important. There is evidence of wave emission with a frequency near the electron plasma frequency, i.e., ω{sub pe}, from the sheath region in collisionless capacitive RF discharges. This is the result of a progressive breakdown of quasi-neutrality close to the electron sheath edge. These waves are damped in a few centimeters during their propagation from the sheath towards the bulk plasma. The damping occurs because of the Landau damping or some related mechanism. This research work reports that the emission of waves is associated with a field reversal during the expanding phase of the sheath. Trapping of electrons near to this field reversal region is observed. The amplitude of the wave increases with increasing RF current density amplitude J(tilde sign){sub 0} until some maximum is reached, beyond which the wave diminishes and a new regime appears. In this new regime, the density of the bulk plasma suddenly increases because of ion reflection, which occurs due to the presence of strong field reversal near sheath region. Our calculation shows that these waves are electron plasma waves. These phenomena occur under extreme conditions (i.e., higher J(tilde sign){sub 0} than in typical experiments) for sinusoidal current waveforms, but similar effects may occur with non-sinusoidal pulsed waveforms for conditions of experimental interest, because the rate of change of current is a relevant parameter. The effect of electron elastic collisions on plasma waves is also investigated.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Electric field reversals resulting from voltage waveform tailoring in Ar/O 2 capacitively coupled plasmas sustained in asymmetric systems

The etching of nanometer scale high-aspect-ratio (HAR) features into dielectric materials in low pressure radio frequency excited plasmas is often accompanied by charge accumulation inside the features which can slow etching rates and produce distortions such as twisting. The intra feature charging is at least partially produced by differences in electron and ion energy and angular distributions (EADs). Positive ions, accelerated to high energies having narrow angular spreads by the sheath electric field, can penetrate deeply into HAR features. Electrons typically arrive at the wafer with nearly thermal and isotropic distributions and do not penetrate deeply into HAR features. These disparities lead to differential charging of the inside of the feature, which can lead to reductions in etch rate and feature distortion due to ion deflection. With in-creasing aspect ratio of features, charging challenges are expected to continue for the foreseeable future. In this work, the use of tailored voltage waveforms in geometrically asymmetric capacitively coupled plasmas sustained in Ar/O 2 at 40 mTorr was computationally investigated with the goal of shaping the EAD of electrons incident onto the substrate to address differential charging. The tailored waveform consisted of a sinusoidal wave and its higher harmonics with a fundamental frequency of 1 MHz. Further, we found that electric field reversals in the sheath and presheath can occur during the anodic portion of the cycle. The electric field reversal increases the energy and decreases the angular spread of electrons incident onto the substrate. The magnitude of the electric field reversal can be controlled by the phase angle of the even harmonics and the gas composition. Due to its electronegative nature, increasing mole fractions of O 2 impedes electron transport to the surface which further increases the electric field reversal.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Global phase diagram of a doped Kitaev-Heisenberg model

The global phase diagram of a doped Kitaev-Heisenberg model is studied using an $SU(2)$ slave-boson mean-field method. Near the Kitaev limit, $p$-wave superconducting states which break the time-reversal symmetry are stabilized as reported by You {\it et al.} [Phys. Rev. B {\bf 86}, 085145 (2012)] irrespective of the sign of the Kitaev interaction. By further doping, a $d$-wave superconducting state appears when the Kitaev interaction is antiferromagnetic, while another $p$-wave superconducting state appears when the Kitaev interaction is ferromagnetic. This $p$-wave superconducting state does not break the time-reversal symmetry as reported by Hyart {\it et al.} [Phys. Rev. B {\bf 85}, 140510 (2012)], and such a superconducting state also appears when the antiferromagnetic Kitaev interaction and the ferromagnetic Heisenberg interaction compete. This work, thus, demonstrates the clear difference between the antiferromagnetic Kitaev model and the ferromagnetic Kitaev model when carriers are doped while these models are equivalent in the undoped limit, and how novel superconducting states emerge when the Kitaev interaction and the Heisenberg interaction compete.

novel superconductivity↗