Search NASA⌕ Search

SEARCH · Search NASA

Results for “scale of effect”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

Spinning Characteristics of the XN2Y-1 Airplane Obtained from the Spinning Balance and Compared with Results from the Spinning Tunnel and from Flight Tests

Report presents the results of tests of a 1/10-scale model of the XN2Y-1 airplane tested in the NACA 5-foot vertical wind tunnel in which the six components of forces and moments were measured. The model was tested in 17 attitudes in which the full-scale airplane had been observed to spin, in order to determine the effects of scale, tunnel, and interference. In addition, a series of tests was made to cover the range of angles of attack, angles of sideslip, rates of rotation, and control setting likely to be encountered by a spinning airplane. The data were used to estimate the probable attitudes in steady spins of an airplane in flight and of a model in the free-spinning tunnel. The estimated attitudes of steady spin were compared with attitudes measured in flight and in the spinning tunnel. The results indicate that corrections for certain scale and tunnel effects are necessary to estimate full-scale spinning attitudes from model results.

Bamber, M J↗

Phase field modelling of stressed grain growth: Analytical study and the effect of microstructural length scale

We establish the correlation between the diffuse interface and sharp interface descriptions for stressed grain boundary migration by presenting analytical solutions for stressed migration of a circular grain boundary in a bicrystalline phase field domain. The validity and accuracy of the phase field model is investigated by comparing the phase field simulation results against analytical solutions. The phase field model can reproduce precise boundary kinetics and stress evolution provided that a thermodynamically consistent theory and proper expressions for model parameters in terms of physical material properties are employed. Quantitative phase field simulations are then employed to investigate the effect of microstructural length scale on microstructure and texture evolution by stressed grain growth in an elastically deformed polycrystalline aggregate. The simulation results reveal a transitional behaviour from normal to abnormal grain growth by increasing the microstructural length scale.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Modelling enhanced confinement in drift-wave turbulence

Here, the results of modeling studies of an enhanced confinement in the drift wave turbulent plasma of the CSDX linear device are presented. The mechanism of enhanced confinement is investigated here using a reduced 1D, time-dependent model, which illustrates the exchange of enstrophy between two disparate scale structures: the mesoscale flow and profile, and the turbulence intensity fields. Mean density, mean vorticity, and turbulent potential enstrophy are the variables for this model. Total potential enstrophy is conserved in this model. Vorticity mixing occurs on a scale length related to an effective Rhines' scale of turbulence, and shrinks as both density and vorticity gradients steepen. Numerical results obtained from solution of the model agree well with the experimental data from CSDX showing: (i) a steepening of the mean density profile, indicating a radial transport barrier formation, (ii) the development of a radially sheared azimuthal flow velocity that coincides with the density steepening and initiates a turbulence quench, and (iii) negative Reynolds work values, indicating that fluctuations drive the shear flow. These observations as the magnitude of the magnetic field B increases are recovered using purely diffusive expressions for the vorticity and density fluxes. A new dimensionless turbulence parameter R DT -defined as the ratio of the integrated potential enstrophy transfer from turbulence to the flow, to the integrated potential enstrophy production due to relaxation of the density gradient is introduced as a turbulence collapse indicator that detects when the enhanced confinement state is triggered

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Supernova-driven Turbulent Metal Mixing in High-redshift Galactic Disks: Metallicity Fluctuations in the Interstellar Medium and its Imprints on Metal-poor Stars in the Milky Way

The extent to which turbulence mixes gas in the face of recurrent infusions of fresh metals by supernovae (SN) could help provide important constraints on the local star formation conditions. This includes predictions of the metallicity dispersion among metal-poor stars, which suggests that the interstellar medium was not very well mixed at these early times. The purpose of this Letter is to help isolate, via a series of numerical experiments, some of the key processes that regulate turbulent mixing of SN elements in galactic disks. We study the gas interactions in small simulated patches of a galaxy disk with the goal of resolving the small-scale mixing effects of metals at parsec scales, which enables us to measure the turbulent diffusion coefficient in various galaxy environments. By investigating the statistics of variations of α elements in these simulations, we are able to derive constraints not only on the allowed range of intrinsic yield variations in SN explosions but also on the star formation history of the Milky Way. We argue that the observed dispersion of [Mg/Fe] in metal-poor halo stars is compatible with the star-forming conditions expected in dwarf satellites or in an early low-star-forming Milky Way progenitor. In particular, metal variations in stars that have not been phase-mixed can be used to infer the star-forming conditions of disrupted dwarf satellites.

79 ASTRONOMY AND ASTROPHYSICS↗

Development of wind tunnel techniques for the solution of problems in planetary Aeolian processes

Kutzbach reports wind profiles over a series of roughness elements on a frozen lake and how the wind profile changed as the surface roughness was varied. The approach of the current study was to duplicate Kutzbach's roughness arrays in the wind tunnel at 1/20 and 1/40 scales, and to compare the wind profiles over these scale models to those derived by Kutzbach at full scale in the field. The effects of scale differences and data reduction techniques are discussed. Although the study suggests that wind tunnel scale models can predict parameters measured in the field, the development of more definitive guidelines requires a field experiment designed specifically for comparison with wind tunnel results.

Sullivan, Robert↗

EFFECTS OF LARGE-SCALE NON-AXISYMMETRIC PERTURBATIONS IN THE MEAN-FIELD SOLAR DYNAMO

We explore the response of a nonlinear non-axisymmetric mean-field solar dynamo model to shallow non-axisymmetric perturbations. After a relaxation period, the amplitude of the non-axisymmetric field depends on the initial condition, helicity conservation, and the depth of perturbation. It is found that a perturbation that is anchored at 0.9 R{sub ⊙} has a profound effect on the dynamo process, producing a transient magnetic cycle of the axisymmetric magnetic field, if it is initiated at the growing phase of the cycle. The non-symmetric, with respect to the equator, perturbation results in a hemispheric asymmetry of the magnetic activity. The evolution of the axisymmetric and non-axisymmetric fields depends on the turbulent magnetic Reynolds number R{sub m}. In the range of R{sub m} = 10{sup 4}–10{sup 6} the evolution returns to the normal course in the next cycle, in which the non-axisymmetric field is generated due to a nonlinear α-effect and magnetic buoyancy. In the stationary state, the large-scale magnetic field demonstrates a phenomenon of “active longitudes” with cyclic 180° “flip-flop” changes of the large-scale magnetic field orientation. The flip-flop effect is known from observations of solar and stellar magnetic cycles. However, this effect disappears in the model, which includes the meridional circulation pattern determined by helioseismology. The rotation rate of the non-axisymmetric field components varies during the relaxation period and carries important information about the dynamo process.

79 ASTRONOMY AND ASTROPHYSICS↗

PARTICLE ACCELERATION AT A FLARE TERMINATION SHOCK: EFFECT OF LARGE-SCALE MAGNETIC TURBULENCE

We investigate the acceleration of charged particles (both electrons and protons) at collisionless shocks predicted to exist in the vicinity of solar flares. The existence of standing termination shocks has been examined by flare models and numerical simulations. We study electron energization by numerically integrating the equations of motion of a large number of test-particle electrons in the time-dependent two-dimensional electric and magnetic fields generated from hybrid simulations (kinetic ions and fluid electron) using parameters typical of the solar flare plasma environment. The shock is produced by injecting plasma flow toward a rigid piston. Large-scale magnetic fluctuations-known to exist in plasmas and known to have important effects on the nonthermal electron acceleration at shocks-are also included in our simulations. For the parameters characteristic of the flaring region, our calculations suggest that the termination shock formed in the reconnection outflow region (above post-flare loops) could accelerate electrons to a kinetic energy of a few MeV within 100 ion cyclotron periods, which is of the order of a millisecond. Given a sufficient turbulence amplitude level ({delta}B{sup 2}/B 2{sub 0} {approx} 0.3), about 10% of thermal test-particle electrons are accelerated to more than 15 keV. We find that protons are also accelerated, but not to as high energy in the available time and the energy spectra are considerably steeper than that of the electrons for the parameters used in our simulations. Our results are qualitatively consistent with the observed hard X-ray emissions in solar flares.

79 ASTRONOMY AND ASTROPHYSICS↗

Analyzing the cosmic variance limit of remote dipole measurements of the cosmic microwave background using the large-scale kinetic Sunyaev Zel'dovich effect

Due to cosmic variance we cannot learn any more about large-scale inhomogeneities from the primary cosmic microwave background (CMB) alone. More information on large scales is essential for resolving large angular scale anomalies in the CMB. Here we consider cross correlating the large-scale kinetic Sunyaev Zel'dovich (kSZ) effect and probes of large-scale structure, a technique known as kSZ tomography. The statistically anisotropic component of the cross correlation encodes the CMB dipole as seen by free electrons throughout the observable Universe, providing information about long wavelength inhomogeneities. We compute the large angular scale power asymmetry, constructing the appropriate transfer functions, and estimate the cosmic variance limited signal to noise for a variety of redshift bin configurations. The signal to noise is significant over a large range of power multipoles and numbers of bins. We present a simple mode counting argument indicating that kSZ tomography can be used to estimate more modes than the primary CMB on comparable scales. A basic forecast indicates that a first detection could be made with next-generation CMB experiments and galaxy surveys. This paper motivates a more systematic investigation of how close to the cosmic variance limit it will be possible to get with future observations.

79 ASTRONOMY AND ASTROPHYSICS↗

Does Aerosol Weaken or Strengthen the South Asian Monsoon?

Aerosols are known to have the ability to block off solar radiation reaching the earth surface, causing it to cool - the so-called solar dimming (SDM) effect. In the Asian monsoon region, the SDM effect by aerosol can produce differential cooling at the surface reducing the meridional thermal contrast between land and ocean, leading to a weakening of the monsoon (Ramanathan et al. 2005). On the other hand, absorbing aerosols such as black carbon and dust, when forced up against the steep slopes of the southern Tibetan Plateau can produce upper tropospheric heating, and induce convection-dynamic feedback leading to an advance of the rainy season over northern India and an enhancement of the South Asian monsoon through the "Elevated Heat Pump" (EHP) effect (Lau et al. 2006). In this paper, we present modeling results showing that in a coupled ocean-atmosphere-land system in which concentrations of greenhouse gases are kept constant, the response of the South Asian monsoon to dust and black carbon forcing is the net result of the two opposing effects of SDM and EHP. For the South Asian monsoon, if the increasing upper tropospheric thermal contrast between the Tibetan Plateau and region to the south spurred by the EHP overwhelms the reduction in surface temperature contrast due to SDM, the monsoon strengthens. Otherwise, the monsoon weakens. Preliminary observations are consistent with the above findings. We find that the two effects are strongly scale dependent. On interannual and shorter time scales, the EHP effect appears to dominate in the early summer season (May-June). On decadal or longer time scales, the SDM dominates for the mature monsoon (July-August). Better understanding the physical mechanisms underlying the SDM and the EHP effects, the local emission and transport of aerosols from surrounding deserts and arid-regions, and their interaction with monsoon water cycle dynamics are important in providing better prediction and assessment of climate change impacts on precipitation of the Asian monsoon land regions.

Lau, William K. M.↗

Does Aerosol Weaken or Strengthen the South Asian Monsoon?

Aerosols are known to have the ability to block off solar radiation reaching the earth surface, causing it to cool - the so-called solar dimming (SDM) effect. In the Asian monsoon region, the SDM effect by aerosol can produce differential cooling at the surface reducing the meridional thermal contrast between land and ocean, leading to a weakening of the monsoon. On the other hand, absorbing aerosols such as black carbon and dust, when forced up against the steep slopes of the southern Tibetan Plateau can produce upper tropospheric heating, and induce convection-dynamic feedback leading to an advance of the rainy season over northern India and an enhancement of the South Asian monsoon through the "Elevated Heat Pump" (EHP) effect. In this paper, we present modeling results showing that in a coupled ocean-atmosphere-land system in which concentrations of greenhouse gases are kept constant, the response of the South Asian monsoon to dust and black carbon forcing is the net result of the two opposing effects of SDM and EHP. For the South Asian monsoon, if the increasing upper tropospheric thermal contrast between the Tibetan Plateau and region to the south spurred by the EHP overwhelms the reduction in surface temperature contrast due to SDM, the monsoon strengthens. Otherwise, the monsoon weakens. Preliminary observations are consistent with the above findings. We find that the two effects are strongly scale dependent. On interannual and shorter time scales, the EHP effect appears to dominate in the early summer season (May-June). On decadal or longer time scales, the SDM dominates for the mature monsoon (July-August). Better understanding the physical mechanisms underlying the SDM and the EHP effects, the local emission and transport of aerosols from surrounding deserts and arid-regions, and their interaction with monsoon water cycle dynamics are important in providing better prediction and assessment of climate change impacts on precipitation of the Asian monsoon land regions.

Lau, William K.↗

Physics and the choice of regulators in functional renormalisation group flows

The Renormalisation Group is a versatile tool for the study of many systems where scale-dependent behaviour is important. Its functional formulation can be cast into the form of an exact flow equation for the scale-dependent effective action in the presence of an infrared regularisation. The functional RG flow for the scale-dependent effective action depends explicitly on the choice of regulator, while the physics does not. In this work, we systematically investigate three key aspects of how the regulator choice affects RG flows: (i) We study flow trajectories along closed loops in the space of action functionals varying both, the regulator scale and shape function. Such a flow does not vanish in the presence of truncations. Based on a definition of the length of an RG trajectory, we suggest a constructive procedure for devising optimised regularisation schemes within a truncation. (ii) In systems with various field variables, a choice of relative cutoff scales is required. At the example of relativistic bosonic two-field models, we study the impact of this choice as well as its truncation dependence. We show that a crossover between different universality classes can be induced and conclude that the relative cutoff scale has to be chosen carefully for a reliable description of a physical system. (iii) Non-relativistic continuum models of coupled fermionic and bosonic fields exhibit also dependencies on relative cutoff scales and regulator shapes. At the example of the Fermi polaron problem in three spatial dimensions, we illustrate such dependencies and show how they can be interpreted in physical terms. - Highlights: • We show the regulator dependence of functional renormalisation (FRG) group equations. • Solving FRG equations along closed loops provides a distance between two regulators. • We suggest a practical procedure for devising optimal regulators. • A universality class crossover can be induced by changing relative cutoff scales. • We examine the regulator dependence explicitly in the Fermi polaron problem.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Trajectories with suppressed tensor-to-scalar ratio in Aligned Natural Inflation

In Aligned Natural Inflation, an alignment between different potential terms produces an inflaton excursion greater than the axion scales in the potential. We show that, starting from a general potential of two axions with two aligned potential terms, the effective theory for the resulting light direction is characterized by four parameters: an effective potential scale, an effective axion constant, and two extra parameters (related to ratios of the axion scales and the potential scales in the 2−field theory). For all choices of these extra parameters, the model can support inflation along valleys (in the 2−field space) that end in minima of the potential. This leads to a phenomenology similar to that of single field Natural Inflation. For a significant range of the extra two parameters, the model possesses also higher altitude inflationary trajectories passing through saddle points of the 2−field potential, and disconnected from any minimum. These plateaus end when the heavier direction becomes unstable, and therefore all of inflation takes place close to the saddle point, where—due to the higher altitude—the potential is flatter (smaller ε parameter). As a consequence, a tensor-to-scalar ratio r = O ( 10{sup −4} − 10{sup −2} ) can be easily achieved in the allowed n{sub s} region, well within the latest 1 σ CMB contours.

79 ASTRONOMY AND ASTROPHYSICS↗

Geometry and Reynolds-Number Scaling on an Iced Business-Jet Wing

A study was conducted to develop a method to scale the effect of ice accretion on a full-scale business jet wing model to a 1/12-scale model at greatly reduced Reynolds number. Full-scale, 5/12-scale, and 1/12-scale models of identical airfoil section were used in this study. Three types of ice accretion were studied: 22.5-minute ice protection system failure shape, 2-minute initial ice roughness, and a runback shape that forms downstream of a thermal anti-ice system. The results showed that the 22.5-minute failure shape could be scaled from full-scale to 1/12-scale through simple geometric scaling. The 2-minute roughness shape could be scaled by choosing an appropriate grit size. The runback ice shape exhibited greater Reynolds number effects and could not be scaled by simple geometric scaling of the ice shape.

Lee, Sam↗

COSMOLOGICAL DENSITY FLUCTUATIONS ON 100 Mpc SCALES AND THEIR ISW EFFECT

We measure the matter probability distribution function (PDF) via counts in cells in a volume-limited subsample of the Sloan Digital Sky Survey Luminous Red Galaxy Catalog on scales from 30 h {sup -1} Mpc to 150 h {sup -1} Mpc and estimate the linear Integrated Sachs-Wolfe effect produced by supervoids and superclusters in the tail of the PDF. We characterize the PDF by the variance, S{sub 3}, and S{sub 4}, and study in simulations the systematic effects due to finite volume, survey shape, and redshift distortion. We compare our measurement to the prediction of {Lambda}CDM with linear bias and find a good agreement. We use the moments to approximate the tail of the PDF with analytic functions. A simple Gaussian model for the superstructures appears to be consistent with the claim by Granett et al. that density fluctuations on 100 h {sup -1} Mpc scales produce hot and cold spots with {Delta}T {approx} 10 {mu}K on the cosmic microwave background.

79 ASTRONOMY AND ASTROPHYSICS↗

Modification in drag of turbulent boundary layers resulting from manipulation of large-scale structures

The effects of placing a parallel-plate turbulence manipulator in a boundary layer are investigated by means of flow visualization and hot-wire measurements. The manipulator was found to be effective in inhibiting the intermittent large scale structure of the boundary layer, and the effect persists for at least 70 boundary-layer thicknesses downstream of the manipulator. With the removal of the large scale, there was an observed reduction in the streamwise turbulence intensity levels near the wall. The downstream distribution of the skin friction coefficient, determined from the stream wise change in fluid momentum, was also altered by the introduction of the manipulator. The data from both the visualization and hot wire studies are provided.

Corke, T. C.↗

Scaled CMOS Technology Reliability Users Guide

The desire to assess the reliability of emerging scaled microelectronics technologies through faster reliability trials and more accurate acceleration models is the precursor for further research and experimentation in this relevant field. The effect of semiconductor scaling on microelectronics product reliability is an important aspect to the high reliability application user. From the perspective of a customer or user, who in many cases must deal with very limited, if any, manufacturer's reliability data to assess the product for a highly-reliable application, product-level testing is critical in the characterization and reliability assessment of advanced nanometer semiconductor scaling effects on microelectronics reliability. A methodology on how to accomplish this and techniques for deriving the expected product-level reliability on commercial memory products are provided.Competing mechanism theory and the multiple failure mechanism model are applied to the experimental results of scaled SDRAM products. Accelerated stress testing at multiple conditions is applied at the product level of several scaled memory products to assess the performance degradation and product reliability. Acceleration models are derived for each case. For several scaled SDRAM products, retention time degradation is studied and two distinct soft error populations are observed with each technology generation: early breakdown, characterized by randomly distributed weak bits with Weibull slope (beta)=1, and a main population breakdown with an increasing failure rate. Retention time soft error rates are calculated and a multiple failure mechanism acceleration model with parameters is derived for each technology. Defect densities are calculated and reflect a decreasing trend in the percentage of random defective bits for each successive product generation. A normalized soft error failure rate of the memory data retention time in FIT/Gb and FIT/cm2 for several scaled SDRAM generations is presented revealing a power relationship. General models describing the soft error rates across scaled product generations are presented. The analysis methodology may be applied to other scaled microelectronic products and their key parameters.

Microelectronics Reliability↗

Pore-Scale Simulation of Intragranular Diffusion: Effects of Incomplete Mixing on Macroscopic Manifestations

Diffusive mass transfer into and out of intragranular micropores ("intragranular diffusion") plays an important role in the large-scale transport of some groundwater contaminants. We are interested in understanding the combined effect of pore-scale advection and intragranular diffusion on solute transport at the effective porous medium scale. To study this problem, we have developed a three-dimensional pore-scale model of fluid flow and solute transport that incorporates diffusion into and out of intragranular pore spaces. Our model is based on the Smoothed Particle Hydrodynamics (SPH) simulation method, which represents fluid and solid phases by a mesh-free particle discretization. In the pore spaces, fluid flow is simulated by discretizing the Navier-Stokes equations using the SPH approach. Solute transport is represented by advection, diffusion within the fluid phase, and diffusion between the fluid and solid phases. Our model is implemented on large-scale parallel computing hardware, allowing us to simulate millions of computational particles and represent fully three-dimensional systems of pores and grains with arbitrarily complex physical geometry. We have used this model system to perform numerical experiments using various model porous media systems, which allows us to draw comparisons between macroscopic measures computed from the pore-scale simulations (such as breakthrough curves) and those predicted by macroscopic formulations that assume complete mixing over the representative volume. In this paper we present results of 3D simulations of pore-scale flow and transport, including cases with and without intragranular diffusion, in two model porous media, one with randomly-packed uniform spherical grains and a second with randomly-packed spheres drawn from a binary grain size distribution. Breakthrough curves were computed from the 3D simulations at various transport distances. Comparable breakthrough curves were computed using 1D macroscopic models with parameters determined independently to the degree possible. Based on comparisons of the pore-scale and macroscopic model results, we draw two primary conclusions. First, non-Fickian behavior is persistent and ubiquitous at the scales considered, and most cases are better represented by a multi-rate mass transfer model even when there is no distinct secondary porosity (i.e., no intragranular diffusion). This suggests that diffusive mass transfer processes between preferential flow paths and relatively immobile zones within the primary porosity may have significant impact on transport, particular in low-concentration tails. Second, the application of mass transfer rate parameters based on an assumption of well-mixed concentrations at the pore-scale tend to overestimate the amount of mass transfer that occurs in heterogeneous pore geometries in which preferential flow leads to incomplete pore-scale lateral mixing.

Environmental Molecular Sciences Laboratory↗

The effective field theory of cosmological large scale structures

Large scale structure surveys will likely become the next leading cosmological probe. In our universe, matter perturbations are large on short distances and small at long scales, i.e. strongly coupled in the UV and weakly coupled in the IR. To make precise analytical predictions on large scales, we develop an effective field theory formulated in terms of an IR effective fluid characterized by several parameters, such as speed of sound and viscosity. These parameters, determined by the UV physics described by the Boltzmann equation, are measured from N-body simulations. We find that the speed of sound of the effective fluid is c 2 s ≈ 10 –6 c 2 and that the viscosity contributions are of the same order. The fluid describes all the relevant physics at long scales k and permits a manifestly convergent perturbative expansion in the size of the matter perturbations δ(k) for all the observables. As an example, we calculate the correction to the power spectrum at order δ(k) 4 . As a result, the predictions of the effective field theory are found to be in much better agreement with observation than standard cosmological perturbation theory, already reaching percent precision at this order up to a relatively short scale k ≃ 0.24h Mpc –1 .

astrophysics↗