Search NASA⌕ Search

SEARCH · Search NASA

Results for “solidification”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

On the Modeling of Thermal Radiation at the Top Surface of a Vacuum Arc Remelting Ingot

Two models have been implemented for calculating the thermal radiation emitted at the ingot top in the VAR process, namely, a crude model that considers only radiative heat transfer between the free surface and electrode tip and a more detailed model that describes all radiative exchanges between the ingot, electrode, and crucible wall using a radiosity method. From the results of the second model, it is found that the radiative heat flux at the ingot top may depend heavily on the arc gap length and the electrode radius, but remains almost unaffected by variations of the electrode height. Both radiation models have been integrated into a CFD numerical code that simulates the growth and solidification of a VAR ingot. The simulation of a Ti-6-4 alloy melt shows that use of the detailed radiation model leads to some significant modification of the simulation results compared with the simple model. This is especially true during the hot-topping phase, where the top radiation plays an increasingly important role compared with the arc energy input. Thus, while the crude model has the advantage of its simplicity, use of the detailed model should be preferred.

36 MATERIALS SCIENCE↗

Analysis of Brazing Effect on Hot Corrosion Behavior of a Nickel-Based Aerospace Superalloy

The effects of brazing and use of composite powder mixture as interlayer material on hot corrosion resistance of brazed IN738 superalloy were studied. Brazing was observed to result in significant reduction in the hot corrosion resistance of the superalloy. However, application of composite powder mixture, which consists of additive superalloy powder, enhanced the hot corrosion resistance of brazed samples. It is also found that although the use of composite powder mixture increased hot corrosion resistance of brazed alloy, if the additive powder completely melts, which is possible during brazing, it can significantly reduce the hot corrosion resistance of the brazed joint. Elemental micro-segregation during solidification of the joint with completely melted powder mixture produces chromium-depleted zones and consequently reduces hot corrosion resistance, since a uniform distribution and adequate chromium concentration are necessary to combat hot corrosion. This has not been previously reported in the literature and it is crucial to the use of composite powder mixture for enhancing the properties of brazed superalloys.

36 MATERIALS SCIENCE↗

Premelting, Melting, and Degradation Properties of Molten Alkali Nitrates: LiNO{sub 3}, NaNO{sub 3}, KNO{sub 3}, and Binary NaNO{sub 3}-KNO{sub 3}

A simultaneous thermal analyzer (STA) was used to observe the transition and degradation events of LiNO{sub 3}, NaNO{sub 3}, KNO{sub 3}, and binary NaNO{sub 3}-KNO{sub 3} salts for potential use as phase change materials (PCMs) and heat transfer fluid (HTF). Samples were heated from 50 °C to 800 °C at 10 °C/min scanning rate in three atmospheres (argon, air, and oxygen) using an STA to observe decomposition behavior. Thermal stability increased for all salts at high partial pressure of O{sub 2} (P{sub O{sub 2}}= 1.0) compared to inert argon (P{sub O{sub 2}}= 0). O{sub 2}, N{sub 2}, NO, N{sub 2}O, and NO{sub 2} were main evolved gases during nitrate decomposition. NO and O{sub 2} started to evolve at approximately the same temperature after melting, indicating that primary and secondary decomposition reactions were concurrent and overlapping. The solid-solid transition, liquidus and solidus temperatures, heat of transition, heat of melting, and heat of solidification were obtained at various heating-cooling rates (1, 2, 4, 5, 6, 8, 10, and 15 °C/min) using an STA. At all heating-cooling rates, a small gap exists between liquidus and solidus temperatures for all samples due to the salts exhibiting supercooling phenomena. This study showed that the degradation point depends on the blanket atmosphere top of the molten salts and that heating rates have a minor effect on transition events (peaks height, peaks width, and transition enthalpies).

36 MATERIALS SCIENCE↗

Multiphase Model of Semisolid Slurry Generation and Isothermal Holding During Cooling Slope Rheoprocessing of A356 Al Alloy

In the present paper, we present an experimentally validated 3D multiphase and multiscale solidification model to understand the transport processes involved during slurry generation with a cooling slope. In this process, superheated liquid alloy is poured at the top of the cooling slope and allowed to flow along the slope under the influence of gravity. As the melt flows down the slope, it progressively loses its superheat, starts solidifying at the melt/slope interface with formation of solid crystals, and eventually exits the slope as semisolid slurry. In the present simulation, the three phases considered are the parent melt as the primary phase, and the solid grains and air as secondary phases. The air phase forms a definable air/liquid melt interface as the free surface. After exiting the slope, the slurry fills an isothermal holding bath maintained at the slope exit temperature, which promotes further globularization of microstructure. The outcomes of the present model include prediction of volume fractions of the three different phases considered, grain evolution, grain growth, size, sphericity and distribution of solid grains, temperature field, velocity field, macrosegregation and microsegregation. In addition, the model is found to be capable of making predictions of morphological evolution of primary grains at the onset of isothermal coarsening. The results obtained from the present simulations are validated by performing quantitative image analysis of micrographs of the rapidly oil-quenched semisolid slurry samples, collected from strategic locations along the slope and from the isothermal slurry holding bath.

36 MATERIALS SCIENCE↗

Evolution of Non-metallic Inclusions and Precipitates in Oriented Silicon Steel

The evolution of inclusions in oriented silicon steel during the manufacturing process was carried out by chemical composition analysis, non-aqueous electrolytic corrosion, and thermodynamic calculation. The morphology, composition, and size of inclusions were analyzed introducing field emission scanning electron microscope. The oxides were mainly formed during the secondary refining, and the nitrides, sulfides, and compounds were formed during the solidification and cooling of steel in the processes of continuous casting and hot rolling.

36 MATERIALS SCIENCE↗

Microstructure and Properties of the Al-27Si/Cu/Al-50Si Joint Brazed by the Partial Transient Liquid Phase Bonding

Al-27Si and Al-50Si were brazed by using a thin Cu interlayer. The metallurgical bonding without obvious defects is achieved, and a wide brazing seam consisting of fine eutectic structures and coarse Si particles is formed in the Al-27Si/Cu/Al-50Si joint. The deposition of Si element in the liquid phases during solidification results in the formation of the larger Si particles and ultra-small Si particles in the brazing seam. The shear strength of the joint reaches 63 MPa.

36 MATERIALS SCIENCE↗

Study of the Mechanism of Liquid Slag Infiltration for Lubrication in Slab Continuous Casting

Consistent and uniform lubrication of the solidifying shell, especially in the meniscus, is crucial for the smooth continuous casting operation and production of strands free of surface defects. Thus, the current study established a coupled model to study the inflow behavior of liquid slag to the mold-strand channel, taking the solidification of steel and slag and the periodic oscillation of mold into account. The difficulties and solutions for the simulation were described in detail. The predicted profiles of the slag rim and initial shell were in good agreement with the reports. The main results indicated that liquid slag could be squeezed out and back into the slag pool in a negative strip period while a large amount of liquid slag could infiltrate into the mold-strand channel. Thus, the amount of slag consumed in the negative strip period was relatively small compared with that in the positive strip period. The predicted variation of slag consumption during mold oscillation was periodic, and the average value was 0.274 kg/m{sup 2}, which agreed well with the slag consumption in industrial practice. The current model can predict and optimize the oscillation parameters aiming at stable lubrication conditions.

36 MATERIALS SCIENCE↗

Three-Dimensional Flow Behavior Inside the Submerged Entry Nozzle

According to various authors, the surface quality of steel depends on the dynamic conditions that occur within the continuous casting mold’s upper region. The meniscus, found in that upper region, is where the solidification process begins. The liquid steel is distributed into the mold through a submerged entry nozzle (SEN). In this paper, the dynamic behavior inside the SEN is analyzed by means of physical experiments and numerical simulations. The particle imaging velocimetry technique was used to obtain the vector field in different planes and three-dimensional flow patterns inside the SEN volume. Moreover, large eddy simulation was performed, and the turbulence model results were used to understand the nonlinear flow pattern inside the SEN. Using scaled physical and numerical models, quasi-periodic behavior was observed due to the interaction of two three-dimensional vortices that move inside the SEN lower region located between the exit ports of the nozzle.

36 MATERIALS SCIENCE↗

Effects of Reoxidation of Liquid Steel and Slag Composition on the Chemistry Evolution of Inclusions During Electroslag Remelting

Electroslag remelting (ESR) is increasingly used to produce some varieties of special steels and alloys, mainly because of its ability to provide extreme cleanliness and an excellent solidification structure simultaneously. In the present study, the combined effects of varying SiO{sub 2} contents in slag and reoxidation of liquid steel on the chemistry evolution of inclusions and the alloying element content in steel during ESR were investigated. The inclusions in the steel before ESR refining were found to be oxysulfides of patch-type (Ca,Mn)S adhering to a CaO-Al{sub 2}O{sub 3}-SiO{sub 2}-MgO inclusion. The oxide inclusions in both the liquid metal pool and remelted ingots are CaO-Al{sub 2}O{sub 3}-MgO and MgAl{sub 2}O{sub 4} together with CaO-Al{sub 2}O{sub 3}-SiO{sub 2}-MgO inclusions (slightly less than 30 pct of the total inclusions), which were confirmed to originate from the reduction of SiO{sub 2} from the original oxide inclusions by dissolved Al in liquid steel during ESR. CaO-Al{sub 2}O{sub 3}-MgO and MgAl{sub 2}O{sub 4} are newly formed inclusions resulting from the reactions taking place inside liquid steel in the liquid metal pool caused by reoxidation of liquid steel during ESR. Increasing the SiO{sub 2} content in slag not only considerably reduced aluminum pickup in parallel with silicon loss during ESR, but also suppressed the decrease in SiO{sub 2} content in oxide inclusions. (Ca,Mn)S inclusions were fully removed before liquid metal droplets collected in the liquid metal pool.

36 MATERIALS SCIENCE↗

Archaeological Arsenical Bronzes and Equilibrium in the As-Cu System

Understanding the effects of impurities, segregation, undercooling, and solidification velocity is necessary to reconstruct prehistoric As-Cu alloy manufacturing processes and practices. Moreover, these alloys often contain a wide variety of minor and trace elements such that the binary As-Cu equilibrium phase diagram does not adequately represent arsenical bronze artifacts as-cast in ancient molds. Furthermore, the variable cooling rates present in as-cast alloys of predominantly arsenic and copper, due to the thermal properties of differing mold materials, would have had profound effects on the formation of inversely segregated arsenic. Alloys with 1 to 15 wt pct arsenic were prepared and studied using differential thermal analysis, metallography, and scanning electron microscopy with energy-dispersive X-ray spectroscopy. Equilibrium diagrams were established and the potential influence of trace elements discussed. A new liquidus curve for the equilibrium diagram in this compositional range, measuring slightly higher in temperature, was established.

36 MATERIALS SCIENCE↗

Processing Parameter Control of Lifetime-Limiting Failure Mechanisms in Al-Si Cast Alloys at Room and Elevated Temperatures

Aluminum-silicon cast alloys widely used throughout the transportation sector, A356, 319, and A390, have been studied with respect to chemical compositions and processing parameters that control the resultant mechanical behavior. First, the development of strengthening mechanisms is discussed in terms of the role that alloying elements, solidification behavior, and thermal treatments play. Based on this understanding, an extensive matrix of material conditions was developed and characterized in order to provide practical guidelines for alloy development. In order to provide an understanding of lifetime-limiting failure mechanisms, fatigue crack growth and hot compressive dwell behaviors were further investigated. Fatigue crack growth tests were conducted for all alloys at R = 0.1 and room temperature, and creep–fatigue of 319 was studied at R = − 1.5 and 250 °C. The role of processing parameters in controlling the mechanical properties is identified and discussed, and recommendations for optimized design are made.

36 MATERIALS SCIENCE↗

Effects of Copper Content and Mold Temperature on the Hot Tearing Susceptibility of Mg-7Zn-xCu-0.6Zr Alloys

The effects of copper (Cu) content and mold temperature on the hot tearing susceptibility (HTS) of Mg-7Zn-xCu-0.6Zr (x = 0, 1, 2) alloys were investigated experimentally using a T-type hot tearing mold. The crack volumes were measured by paraffin permeation method, and the solidification process was analyzed by thermal analysis and by using the Clyne and Davies model. The microstructure and morphology of the crack zone of Mg-7Zn-xCu-0.6Zr alloys were characterized by scanning electron microscopy, and the composition of alloys was analyzed by X-ray diffraction. The results showed the formation of a new phase of MgZnCu in the alloys with Cu addition. Moreover, addition of Cu also led to the refinement of microstructures of Mg-7Zn-xCu-0.6Zr alloys. The HTS of Mg-7Zn-xCu-0.6Zr alloys decreased with the increase in both the content of Cu and the mold temperature.

36 MATERIALS SCIENCE↗

Engulfment Behavior of Inclusions in High-Carbon Steel: Theoretical and Experimental Investigation

Previous studies on inclusions behavior at the front of the solidifying steel shell have mainly focused on low-carbon steels. However, with the increasing applications of high-carbon steel in recent years because of its superior properties, it is crucial to understand this behavior in high-carbon steel. Most of the high-carbon steels are deoxidized by silicon, calcium treated, and contain higher sulfur percentage. Also, higher carbon content has a determining influence on the viscosity and surface tension, which will affect the inclusion behavior. In this study, we have investigated the engulfment behaviors of inclusions in front of the solidifying interface in high-carbon steels using concentric solidification method. The critical velocity of the growing shell, at which the particle is engulfed in the solidifying shell, instead of being pushed by this shell, was determined. The inclusion identified in this study is a bi-component form of CaO-SiO{sub 2}-based oxide and CaS. It was revealed that engulfment behavior is strongly affected by convection of liquid steel that originates from carbon push out in high-carbon steels. This study provides new crucial information to produce high-carbon steel with fewer inclusions, which opens new application pathways for this emerging grade of steel.

36 MATERIALS SCIENCE↗

Influence of Growth Rate on Eutectic Spacing, Microhardness, and Ultimate Tensile Strength in the Directionally Solidified Al-Cu-Ni Eutectic Alloy

In this work, the mechanical properties of the Al-Cu-Ni eutectic alloy, Al-32.5 wt pct Cu-1 wt pct Ni, were investigated in terms of the dependency on growth rates. The Al-Cu-Ni eutectic alloy was directionally solidified at a constant temperature gradient, G = 4.93 K mm{sup −1}, with a wide range of growth rates (V = 9.25 to 2056.68 µm s{sup −1}) using a Bridgman-type directional solidification furnace. The eutectic spacing (λ), microhardness (HV{sub T}), and ultimate tensile strength (σ{sub UTS}) were measured with standard techniques. The dependences of λ, HV{sub T}, and σ{sub UTS} on V for directionally solidified Al-Cu-Ni eutectic alloy were experimentally obtained using regression analysis. The results obtained in the present work were compared with the similar experimental results in the literature. Finally, the elastic energy dependence on growth rates for Al-32.5 wt pct Cu-1 wt pct N alloy was determined from their nominal stress–strain plots.

36 MATERIALS SCIENCE↗

Transient Behavior and Thermodynamics of Inclusions in Al-Ti-Deoxidized and Ca-Treated Steel

Ti-alloyed steels have severe nozzle clogging problems, which are detrimental to the steel production process. However, little research on the Al-Ti-Ca-O complex inclusion in molten steel has been carried out. Based on that, experiments with different calcium additions were carried out in an Al{sub 2}O{sub 3} crucible at 1873 K to investigate the variation of inclusions in Ti-bearing Al-killed steel in the current article. It was found that calcium treatment significantly influenced the morphology, composition distribution, and size of oxides in Ti-bearing Al-killed steel. Inclusions with a higher CaO or TiO{sub x} content were liquid at 1873 K (1600 °C), indicating that the inclusions in Ti-contained steel can be modified to liquid ones through the proper calcium treatment process. The appropriate amount of calcium should be added to the steel depending upon the aluminum and titanium contents. Thermodynamics of the inclusions in the Al-Ti-Ca-O molten steel system at high temperature and during the solidification process were comprehensively calculated, including all types of inclusions such as calcium oxide, aluminum oxide, titanium oxide, calcium aluminate, calcium titanate, and liquid inclusion. The thermodynamic calculations agree well with the experimental results and can precisely predict the formation of the inclusions in Al-Ti-Ca deoxidized steel.

36 MATERIALS SCIENCE↗

Simultaneous Removal of Silicon and Iron-Rich Phases from Coarse Al-Si Alloys Using Manganese Under Electromagnetic Field

Coarse Al-Si alloy is produced from bauxite via carbon electro-thermal reduction method. Silicon and iron-rich phases are two main detrimental impurities in coarse Al-Si alloy, and they can be simultaneously removed by adding Mn under the electromagnetic field. We focus on the influence of different Mn additions, dropping rates, and current intensity on the simultaneous removal efficiency of Si and Fe. Experimental results show that as mole ratio of Mn/Fe reaches more than 0.8, the morphology of iron-rich phases together with silicon changed from harmful acicular-like to the contributing bulks, concentrated at the bottom of Al-Si alloy as intermetallic compounds. Furthermore, when Mn/Fe reaches 1.2 and a lower dropping rate (5 to 25 μm/s) is adopted, both Si and Fe contents in the Al-Si alloy decreased drastically after electromagnetic directional solidification process, reaching 11.42 and 0.4 pct, respectively, with a desirable Fe removal efficiency of 91 pct. Finally, the principle of simultaneously separating Si and removing iron-rich phases from Al-Si alloy is studied deeply.

36 MATERIALS SCIENCE↗

Feasibility Study of Continuous Casting of Steel Billets in Twin-Belt Caster

Integrated casting and rolling in a series production line is well established for the non-ferrous metals through the use of twin-belt casting technology. However, this twin-belt casting with high mass flow is not yet commercialized in the continuous production of steel alloys. A novel steel casting for the in-line rolling (named LUUP method) is presented and one main focus of this work is to design a casting machine: twin-belt caster. Influence of mass flow rate and dimensional ratio on the solidification, compensation, and total process length is addressed. A gap-dependent belt and dam block side heat transfer is modeled. The admissible casting speed due to the limitations of caster length and shell strength is addressed. The total process length only depends on the mass flow rate. A 2D traveling slice numerical model is presented with realistic boundary conditions for the entire process starting from the meniscus to roll mill entry.

36 MATERIALS SCIENCE↗

High-Temperature Properties and Microstructural Stability of the AISI H13 Hot-Work Tool Steel Processed by Selective Laser Melting

The microstructural stabilities, softening resistance, and high-temperature tensile properties of the H13 hot-work tool steel by selective laser melting (SLM) were systematically studied. A series of tempering procedures were performed on the as-SLMed specimens. Afterwards, the mechanism of softening resistance behavior was discussed based on the XRD, SEM, EBSD observations, hardness measurements, and high-temperature tensile tests. It was found that the as-SLMed H13 consisted of α-iron and γ-iron. The carbide-stabilizing elements aggregated as the cell-like substructures for the rapid solidification of the SLM process. After the softening resistance treatment, the retained austenite transformed to ferrite and carbide mixtures. The cell-like substructures dissolved slowly into the matrix when the temperature was below 550 °C. These factors increased the hardness and retarded the softening of the material. When the temperature was 600 °C, the microstructural constituents transformed to soft ferrite and globular carbides, which lead to a considerable decrease of the hardness. Due to the grain refinement, solid solution strengthening, and residual stress, the as-SLMed H13 exhibited better mechanical properties than that of the wrought counterparts.

36 MATERIALS SCIENCE↗