Search NASA⌕ Search

SEARCH · Search NASA

Results for “specific correlation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39
All sourcesNASA NTRSDOE OSTI
NASA NTRS2021

Validation of the aerosol optical property products derived by the GRASP/Component approach from multi-angular polarimetric observations

The multi-angle polarimetric satellite observations are helpful for improving the retrievals of aerosol parameters. However, practical applications of polarization technology are still limited because of complexity of measurement and interpretation of polarimetric observations. In this study, we analyze the performance of a new component approach developed in the frame of the Generalized Retrieval of Atmosphere and Surface Properties (GRASP) algorithm. In addition to aerosol optical properties including particle size distribution, non-sphericity and index of refraction that are commonly derived from multi-angle radiance and polarization measurements, the GRASP/Component approach also provides some information about aerosol composition. Specifically, in this approach aerosol is modeled as an internal mixture of several components with distinctly different chemical compositions and known refractive indices. The approach is intended not only to provide additional insight on aerosol composition but also to improve retrieval of basic aerosol optical properties. This study presents comprehensive validation and evaluation of Aerosol Optical Depth (AOD), Ångstrom exponent (AE), fine mode AOD (AODF), coarse mode AOD (AODC), and single scattering albedo (SSA) as retrieved by the GRASP/Component approach. The GRASP/Component products include aerosol retrievals using two different aerosol component mixing rules, i.e., Maxwell-Garnett (MG) effective medium approximation and a simple Volume- Weighted averaging (VW). The differences between the results obtained using these two assumptions are also discussed. The obtained results show that the aerosol optical property products of GRASP/Component approach have good agreement with the ground-based AERONET measurements, which is comparable to other PARASOL/ GRASP approaches. Specifically, the AOD retrieved by GRASP/Component approach show high correlation and nearly no bias both over land and ocean, as compared with AERONET. The more detailed aerosol properties such as AE, AODF, AODC and SSA also show one of the best comparisons with AERONET. These improvements can probably be attributed to the use of the additional physical constraints on spectral dependence of the complex refractive index and the reduction of total number of aerosol parameters directly retrieved in the GRASP/Component approach. In addition, the choice of mixing rules had no significant effect on optical retrievals. With the exception of SSA, the results obtained based on the MG mixing rule were found to be slightly better over those obtained using VW mixing rule, especially for bias.

Brent N Holben↗
DOE OSTI2021

Model investigation of the longitudinal broadening of the transverse momentum two-particle correlator

Here, the multiphase transport model is used to investigate the longitudinal broadening of the transverse momentum two-particle correlator C 2 (Δη,Δφ), and its utility to extract the specific shear viscosity, η/s, of the quark-gluon plasma formed in ultrarelativistic heavy ion collisions. The results from these model studies indicate that the longitudinal broadening of C 2 (Δη,Δφ) is sensitive to the value of η/s. However, reliable extraction of the longitudinal broadening of the correlator requires the suppression of possible self-correlations associated with the definition of the collision centrality.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Pin-pointing Node Failures in HPC Systems

Automated fault prediction and diagnosis in HPC systems needs to be efficient for better system resilience. With increasing scalability required for exascale, accurate fault prediction aiding in quick remedy is hard. With changing supercomputer architectures, distilling fault data from the noisy raw logs requires substantial efforts. Predicting node failures in such voluminous system logs is challenging. To this end, we investigate an interesting way to pin-point node failures in such supercomputing systems. Our study on Cray system data with automated machine learning tools suggests that specific patterns of event messages on node unavailability can be indicator to node failures. This data extraction coupled with system and job data correlation helps in devising a methodology to predict node failures and their location over a specific time frame. This work aims to enable broader applicability for a generic fault prediction framework.

Roman, E↗
NASA NTRS2005

Health Management Applications for International Space Station

Traditional mission and vehicle management involves teams of highly trained specialists monitoring vehicle status and crew activities, responding rapidly to any anomalies encountered during operations. These teams work from the Mission Control Center and have access to engineering support teams with specialized expertise in International Space Station (ISS) subsystems. Integrated System Health Management (ISHM) applications can significantly augment these capabilities by providing enhanced monitoring, prognostic and diagnostic tools for critical decision support and mission management. The Intelligent Systems Division of NASA Ames Research Center is developing many prototype applications using model-based reasoning, data mining and simulation, working with Mission Control through the ISHM Testbed and Prototypes Project. This paper will briefly describe information technology that supports current mission management practice, and will extend this to a vision for future mission control workflow incorporating new ISHM applications. It will describe ISHM applications currently under development at NASA and will define technical approaches for implementing our vision of future human exploration mission management incorporating artificial intelligence and distributed web service architectures using specific examples. Several prototypes are under development, each highlighting a different computational approach. The ISStrider application allows in-depth analysis of Caution and Warning (C&W) events by correlating real-time telemetry with the logical fault trees used to define off-nominal events. The application uses live telemetry data and the Livingstone diagnostic inference engine to display the specific parameters and fault trees that generated the C&W event, allowing a flight controller to identify the root cause of the event from thousands of possibilities by simply navigating animated fault tree models on their workstation. SimStation models the functional power flow for the ISS Electrical Power System and can predict power balance for nominal and off-nominal conditions. SimStation uses realtime telemetry data to keep detailed computational physics models synchronized with actual ISS power system state. In the event of failure, the application can then rapidly diagnose root cause, predict future resource levels and even correlate technical documents relevant to the specific failure. These advanced computational models will allow better insight and more precise control of ISS subsystems, increasing safety margins by speeding up anomaly resolution and reducing,engineering team effort and cost. This technology will make operating ISS more efficient and is directly applicable to next-generation exploration missions and Crew Exploration Vehicles.

Alena, Richard↗
NASA NTRS1989

Applications of flight control system methods to an advanced combat rotorcraft

Advanced flight control system design, analysis, and testing methodologies developed at the Ames Research Center are applied in an analytical and flight test evaluation of the Advanced Digital Optical Control System (ADOCS) demonstrator. The primary objectives are to describe the knowledge gained about the implications of digital flight control system design for rotorcraft, and to illustrate the analysis of the resulting handling-qualities in the context of the proposed new handling-qualities specification for rotorcraft. Topics covered in-depth are digital flight control design and analysis methods, flight testing techniques, ADOCS handling-qualities evaluation results, and correlation of flight test results with analytical models and the proposed handling-qualities specification. The evaluation of the ADOCS demonstrator indicates desirable response characteristics based on equivalent damping and frequency, but undersirably large effective time-delays (exceeding 240 m sec in all axes). Piloted handling-qualities are found to be desirable or adequate for all low, medium, and high pilot gain tasks; but handling-qualities are inadequate for ultra-high gain tasks such as slope and running landings.

Tischler, Mark B.↗
DOE OSTI2018

Anticorrelated Contributions to Pre-edge Features of Aluminate Near-Edge X-ray Absorption Spectroscopy in Concentrated Electrolytes

Ion pairing within complex solutions and electrolytes is a difficult phenomenon to measure and investigate, yet it has significant impact upon macroscopic processes, such as crystal formation. Traditional methods of detecting and characterizing ion pairing are sensitive to contact ion pairs, may require minimum concentrations that limit applicability,and can have difficulty in characterizing solutions with many components. Because of its element specificity and sensitivity to local environment, X-ray absorption near edge structure (XANES) is a promising tool for investigating ion pairing in complex solutions. In concentrated sodium aluminate solutions, a shift in the pre-edge shoulder correlated to sodium concentration is observed, and the physical origins of that shift are investigated using energy specific time-dependent density functional theory of sub-ensembles obtained from ab-initio molecular dynamics. Two transitions are found to contribute to the pre-edge feature, yet they are anti-correlated with respect to the sodium...aluminate distance. Unexpectedly, this causes Al XANES to be an effective probe for longer-range ion interactions than the traditional counterparts of NMR or vibrational spectroscopies. Given the nature of the transitions involved, this observation may be extended to other systems where ion-ion interactions dominate, however a complete understanding of the contributing transitions is necessary for accurate analysis of XANES pre-edge features in concentrated electrolytes.

Wildman, Andrew↗
DOE OSTI2022

Establishment of a reverse transcription real-time quantitative PCR method for Getah virus detection and its application for epidemiological investigation in Shandong, China

Getah virus (GETV) is a mosquito-borne, single-stranded, positive-sense RNA virus belonging to the genus Alphavirus of the family Togaviridae . Natural infections of GETV have been identified in a variety of vertebrate species, with pathogenicity mainly in swine, horses, bovines, and foxes. The increasing spectrum of infection and the characteristic causing abortions in pregnant animals pose a serious threat to public health and the livestock economy. Therefore, there is an urgent need to establish a method that can be used for epidemiological investigation in multiple animals. In this study, a real-time reverse transcription fluorescent quantitative PCR (RT-qPCR) method combined with plaque assay was established for GETV with specific primers designed for the highly conserved region of GETV Nsp1 gene. The results showed that after optimizing the condition of RT-qPCR reaction, the minimum detection limit of the assay established in this study was 7.73 PFU/mL, and there was a good linear relationship between viral load and Cq value with a correlation coefficient ( R 2 ) of 0.998. Moreover, the method has good specificity, sensitivity, and repeatability. The established RT-qPCR is 100-fold more sensitive than the conventional RT-PCR. The best cutoff value for the method was determined to be 37.59 by receiver operating characteristic (ROC) curve analysis. The area under the curve (AUC) was 0.956. Meanwhile, we collected 2,847 serum specimens from swine, horses, bovines, sheep, and 17,080 mosquito specimens in Shandong Province in 2022. The positive detection rates by RT-qPCR were 1%, 1%, 0.2%, 0%, and 3%, respectively. In conclusion, the method was used for epidemiological investigation, which has extensive application prospects.

Cao, Xinyu↗
NASA NTRS1983

Shuttle Orbiter boundary-layer transition - A comparison of flight and wind tunnel data

Hypersonic boundary-layer transition data obtained on the windward centerline of the Shuttle Orbiter during entry for the first four flights are presented and analyzed. Because the Orbiter surface is composed of a large number of thermal protection tiles, the transition data include the effects of distributed roughness arising from tile misalignment and gaps. These data are used as a benchmark for assessing and improving the accuracy of boundary-layer transition predictions based on correlations of wind tunnel data taken on both aerodynamically rough and smooth Orbiter surfaces. By comparing these two data bases, the relative importance of tunnel free-stream noise and surface roughness on Orbiter boundary-layer transition correlation parameters can be assessed. This assessment indicates that accurate predictions of transition times can be made for the Orbiter at hypersonic flight conditions by using roughness dominated wind tunnel data. Specifically, times of transition onset and completion can be accurately predicted using a correlation based on critical and effective values of a roughness Reynolds number previously derived from wind tunnel data.

Goodrich, W. D.↗
DOE OSTI2018

Correlating Enzymes to Antimicrobial Resistance in the Protein Data Bank

Antibiotic resistant bacteria are predicted to be the leading cause of death worldwide, with an expected death rate of 10 million people, annually, by 2050. It is vital that antimicrobial resistance (AMR) be understood at the molecular level. The Protein Data Bank (PDB) archive holds over 130,000 3D structures of macromolecular machines that can be analyzed using the RCSB PDB website at RCSB.org. Studying these 3D structures enables scientific research and education in a variety of fields, including drug discovery, nanotechnology, green energy, and disease. In this study, PDB enzymes related to antibiotic inhibitors were identified and further analyzed using additional bioinformatics including The Comprehensive Antibiotic Resistance Database (CARD). CARD holds up to date clinically relevant antibiotic related information. CARD identified 4,688 Genbank IDs (protein accession codes) that are related to AMR. These codes were then put into the Uniprot website which holds protein sequences. As a result, 696 macromolecules related to AMR were found in the PDB. I specifically researched Metallo Beta Lactamases (MBL) because have a large correlation to AMR and have been studied in great detail, with many examples in the PDB. Prominent enzymes in this category include the New Delhi Beta Lactamase which can cleave most if not all antibiotics. This particular “superbug” was found to cleave penicillin, cephalosporin, and carbapenem antibiotics. Using 3D visualizations of beta lactamase enzymes a correlation between zinc ions and spectrum of antibiotic resistance was found. For example, if an enzyme had two zinc ions instead of one it could inhibit broad spectrum antibiotics. In conclusion, the findings of this research presented here will be used to develop novel AMR tab at RCSB.org that will provide antimicrobial details of enzymes that were unavailable before. In the near future a phylogenetic tree of AMR related enzymes and classification details will be implemented. Support or Funding Information RCSB PDB is funded by a grant from the National Science Foundation (DBI‐1338415) , the National Institutes of Health , and the US Department of Energy . This abstract is from the Experimental Biology 2018 Meeting. There is no full text article associated with this abstract published in The FASEB Journal .

Salcedo, Priscilla M.↗
DOE OSTI2017

Divergence in Gene Regulation Contributes to Sympatric Speciation of Shewanella baltica Strains

Niche partitioning and sequence evolution drive genomic and phenotypic divergence, which ultimately leads to bacterial diversification. This study investigated the genomic composition of two Shewanella baltica clades previously identified through multilocus sequencing typing and recovered from the redox transition zone in the central Baltic Sea. Comparative genomic analysis revealed significantly higher interclade than intraclade genomic dissimilarity and that a subset of genes present in clade A were associated with potential adaptation to respiration of sulfur compounds present in the redox transition zone. The transcriptomic divergence between two representative strains of clades A and D, OS185 and OS195, was also characterized and revealed marked regulatory differences. We found that both the transcriptional divergence of shared genes and expression of strain-specific genes led to differences in regulatory patterns between strains that correlate with environmental redox niches. For example, under anoxic conditions of respiratory nitrate ammonification, OS185—the strain isolated from a nitrate-rich environment—upregulated nearly twice the number of shared genes upregulated by OS195—the strain isolated from an H 2 S-containing anoxic environment. On the other hand, OS195 showed stronger induction of strain-specific genes, especially those associated with sulfur compound respiration, under thiosulfate-reducing conditions. A positive association between the level of transcriptional divergence and the level of sequence divergence for shared genes was also noted. Our results provide further support for the hypothesis that genomic changes impacting transcriptional regulation play an important role in the diversification of ecologically distinct populations. IMPORTANCE: This study examined potential mechanisms through which co-occurring Shewanella baltica strains diversified to form ecologically distinct populations. At the time of isolation, the strains studied composed the major fraction of culturable nitrate-reducing communities in the Baltica Sea. Analysis of genomic content of 13 S. baltica strains from two clades representing different ecotypes demonstrated that one clade specifically possesses a number of genes that could favor successful adaptation to respire sulfur compounds in the portion of the water column from which these strains were isolated. In addition, transcriptional profiling of fully sequenced strains representative of these two clades, OS185 and OS195, under oxygen-, nitrate-, and thiosulfate-respiring conditions demonstrated that the strains exhibit relatively similar transcriptional responses during aerobic growth but more-distinct transcriptional responses under nitrate- and thiosulfate-respiring conditions. Results from this study provide insights into how genomic and gene regulatory diversification together impacted the redox specialization of the S. baltica strains.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Understanding the Computing and Analysis Needs for Resiliency of Power Systems from Severe Weather Impacts

As the frequency and intensity of severe weather has increased, its effect on the electric grid has manifested in the form of significantly more and larger outages in the United States. This has become especially true for regions that were previously isolated from weather extremes. In this paper, we analyze the weather impacts on the electric power grid across a variety of weather conditions, draw correlations, and provide practical insights into the operational state of these systems. High resolution computational modeling of specific meteorological variables, computational approaches to solving power system models under these conditions, and the types of resiliency needs are highlighted as goal-oriented computing approaches are being built to address grid resiliency needs. An example analysis correlating outages to 1km day-ahead weather from two historical winter storms, calculated on a large cluster using a combination of interpolated and extrapolated inputs from multiple instrumented sites to workflows that produce primary meteorological outputs, is shown as initial proof of concept.

analysis↗
DOE OSTI2018

Unusual magnetodielectric effects in La2CuMnO6 induced by a dynamic crossover in dielectric relaxation at TC

Highlights: • Ferromagnetic short-range correlations above T{sub C} = 72 K and a sign reversal of magnetoresistance around T{sub C}. • Dielectric relaxation in La{sub 2}CuMnO{sub 6}, with a dynamic (Arrhenius to Arrhenius) crossover at T{sub C}. • An unusual trend in the magnetodielectric coupling around T{sub C}. • A large magnetodielectric coupling of 55% at 68 K for 4 kHz and 61% at 105 K for 285.8 kHz under a magnetic field of 5 kOe. • Both the magnetic ordering and the external magnetic field control the electric dipole relaxation in the material. - Abstract: A series of fixed frequency dielectric measurements shows dielectric relaxation in La{sub 2}CuMnO{sub 6}, with a dynamic (Arrhenius to Arrhenius) crossover at T{sub C}. The external magnetic field alters the relaxation parameters in the vicinity of crossover and induces an unusual trend in the magnetodielectric coupling around T{sub C}. A large magnetodielectric coupling of 55% (at 68 K, 4 kHz) and 61% (at 105 K, 285.8 kHz) under a small magnetic field of 5 kOe is discovered. Presence of ferromagnetic short-range correlations above T{sub C} and a sign reversal of magnetoresistance around T{sub C} are observed. Specific heat analysis revealed the presence of ferromagnetic, variable range hopping active charge localized state. The presence of ferromagnetic short-range correlations and the influence of a core-grain dominated magnetoresistance on the Maxwell-Wagner interfacial polarization are responsible for the observed large magnetodielectric effect. Both the magnetic ordering and external magnetic field control the electric dipole relaxation in the material.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1973

Noise comparisons from full-scale fan tests at NASA Lewis Research Center.

The overall aero and acoustic design features of eight 6-foot-diameter, single-stage fans tested in an outdoor acoustic facility are described. A correlation of the acoustic results for subsonic tip-speed fans showed the total sound power to be proportional to the mechanical power imparted to the fan and the specific work performed on the air to within plus or minus 2 dB. The correlation was relatively insensitive to fan design variables over a broad range of operating conditions. Maximum perceived noise levels were generally proportional to the sound power levels with both noise levels exhibiting a relatively unique increase with fan pressure ratio when normalized by the delivered thrust. The spectra of broadband noise attributed to the fan exhibited a bimodal characteristic for most of the fans. A predominant mode centered near the blade-passage tone and another at 8 to 16 times the tone frequency.

Heidmann, M. F.↗
DOE OSTI2020

Nonrandom two‐liquid activity coefficient model with association theory

Abstract Considered one of the most versatile and widely used classical thermodynamic models to correlate phase equilibria behavior of nonideal systems, the nonrandom two‐liquid (NRTL) theory does not explicitly account for specific chemical associations such as hydrogen bonding. This deficiency has been recognized as the cause for unsatisfactory representation of association systems like methanol–alkanes binaries. This work presents a practical approach to integrate Wertheim's perturbation theory for association contribution with the classical NRTL model. Specifically, the association contribution is calculated from pre‐determined molecule‐specific association strengths while the physical interaction contribution is captured with NRTL binary interaction parameters. The resulting association NRTL model correlates fluid phase equilibria of association systems with few adjustable parameters and offers improved predictive capability for higher order systems.

Hao, Yifan↗
DOE OSTI2026

A scalable variational method for estimating the latent infection-rate field of an outbreak

In this paper, we explore whether the infection-rate of a disease can serve as a robust monitoring variable in epidemiological surveillance algorithms. The infection-rate is dependent on population mixing patterns that do not vary erratically day-to-day; in contrast, daily case-counts used in contemporary surveillance algorithms are corrupted by reporting errors. The technical challenge lies in estimating the latent infection-rate from case-counts. Here we devise a Bayesian method to estimate the infection-rate across multiple adjoining areal units, and then use it, via an anomaly detector, to discern a change in epidemiological dynamics. We extend an existing model for estimating the infection-rate in an areal unit by incorporating a Markov random field model, so that we may estimate infection-rates across multiple areal units, while preserving spatial correlations observed in the epidemiological dynamics. To carry out the high-dimensional Bayesian inverse problem, we develop an implementation of mean-field variational inference specific to the infection model and integrate it with the random field model to incorporate correlations across counties. The method is tested on estimating the COVID-19 infection-rates across all 33 counties in New Mexico using data from the summer of 2020, and then employing them to detect the arrival of the Fall 2020 COVID-19 wave. We perform the detection using a temporal algorithm that is applied county-by-county. We also show how the infection-rate field can be used to cluster counties with similar epidemiological dynamics.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2017

LOSS Revisited. I. Unraveling Correlations between Supernova Rates and Galaxy Properties, as Measured in a Reanalysis of the Lick Observatory Supernova Search

Most types of supernovae (SNe) have yet to be connected with their progenitor stellar systems. Here, we reanalyze the 10-year SN sample collected during 1998–2008 by the Lick Observatory Supernova Search (LOSS) in order to constrain the progenitors of SNe Ia and stripped-envelope SNe (SE SNe, i.e., SNe IIb, Ib, Ic, and broad-lined Ic). We matched the LOSS galaxy sample with spectroscopy from the Sloan Digital Sky Survey and measured SN rates as a function of galaxy stellar mass, specific star formation rate, and oxygen abundance (metallicity). We find significant correlations between the SN rates and all three galaxy properties. The SN Ia correlations are consistent with other measurements, as well as with our previous explanation of these measurements in the form of a combination of the SN Ia delay-time distribution and the correlation between galaxy mass and age. The ratio between the SE SN and SN II rates declines significantly in low-mass galaxies. This rules out single stars as SE SN progenitors, and is consistent with predictions from binary-system progenitor models. Using well-known galaxy scaling relations, any correlation between the rates and one of the galaxy properties examined here can be expressed as a correlation with the other two. These redundant correlations preclude us from establishing causality—that is, from ascertaining which of the galaxy properties (or their combination) is the physical driver for the difference between the SE SN and SN II rates. We outline several methods that have the potential to overcome this problem in future works.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

High Throughput Coefficient Thermal Expansion Testing Utilizing Digital Image Correlation

Dr. Fitzgerald, a postdoc at Sandia National Laboratories, works in a materials of mechanics group characterizing material properties of ductile materials. Her presentation focuses specifically on increasing throughput of coefficient of thermal expansion (CTE) measurements with the use of optical strain measurements, called digital image correlation (DIC). Currently, the coefficient of thermal expansion is found through a time intensive process called dilatometry. There are multiple types of dilatometers. One type, a double push rod mechanical dilatometer, uses and LVDT to measure the expansion of a specimen in one direction. It uses a reference material with known properties to determine the CTE of the specimen in question. Testing about 500 samples using the double push rod mechanical dilatometer would take about 2 years if testing Monday through Friday, because the reference material needs to be at a constant temperature and heating must done slowly to ensure no thermal gradients across the rod. A second type, scissors type dilatometer, pinches a sample using a “scissor-like” appendage that also uses a LVDT to measure thermal expansion as the sample is heated. Finally, laser dilatometry, was created to provide a non-contact means to measure thermal expansion. This process greatly reduces the time required to setup a measurement but is still only able to measure one sample at a time. The time required to test 500 samples gets reduced to 3.5 weeks. Additionally, to measure expansion in different directions, multiple lasers must be used. Dr. Fitzgerald solved this conundrum by using an optical measurement technique called digital image correlation to create strain maps in multiple orientations as well as measuring multiple samples at once. Using this technique, Dr. Fitzgerald can test 500 samples, conservatively, in 2 days.

36 MATERIALS SCIENCE↗
NASA NTRS2010

Improving Bone-Health Monitoring in Astronauts: Recommended Use of Quantitative Computed Tomography [QCT] for Clinical and Operational Decisions by NASA

DXA measurement of areal bone mineral density [aBMD,g/cm2] is required by NASA for assessing skeletal integrity in astronauts. Due to the abundance of population-based data that correlate hip and spine BMDs to fragility fractures, BMD is widely applied as a predictor of fractures in the general aging population. In contrast, QCT is primarily a research technology that measures three-dimensional , volumetric BMD (vBMD,mg/cm3) of bone and is therefore capable of differentiating between cortical and trabecular components. Additionally, when combined with Finite Element Modeling [FEM], a computational tool, QCT data can be used to estimate the whole bone strength of the hip [FE strength] for a specific load vector. A recent report demonstrated that aBMD failed to correlate with incurred changes in FE strength (for fall and stance loading) by astronauts over typical 180-day ISS (International Space Station) missions. While there are no current guidelines for using QCT data in clinical practice, QCT increases the understanding of how bone structure and mineral content are affected by spaceflight and recovery on Earth. In order to understand/promote/consider the use of QCT, NASA convened a panel of clinicians specializing in osteoporosis. After reviewing the available, albeit limited, medical and research information from long-duration astronauts (e.g., data from DXA, QCT, FEM, biochemistry analyses, medical records and in-flight exercise performance) the panelists were charged with recommending how current and future research data and analyses could inform clinical and operational decisions. The Panel recommended that clinical bone tests on astronauts should include QCT (hip and lumbar spine) for occupational risk surveillance and for the estimation of whole hip bone strength as derived by FEM. FE strength will provide an improved index that NASA could use to select astronauts of optimal bone health for extended duration missions, for repeat missions or for specific mission operations.

Sibonga, J. D.↗